some assumptions were incorrect: our test server immediately sends
its SETTINGS frame, as a result we have to reply with client preface +
SETTINGS(ACK). So QVERIFY(!prefaceOK) was wrong from the beginning and
was only passing by pure luck.
Change-Id: Ie43f0d4ac41deb0e5339badaae6149a9b2f9d9b3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
One of the tests above was unsetting a variable that enforces
the use of a temporary keychain. We have to set it back, otherwise
the test is failing. What surprises me though - why I had this
problem only locally and not on CI? Apparently, SecureTransport
is not covered by our configurations ...
Change-Id: I0ff1e3e304632869391ed61213c245b949d8c778
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Lookups performed via QHostInfoRunnable must not synchronously call
the user-code's receiver objects, as that would execute user-code in
the wrong thread. Instead, post a metacall event through the event
loop of the receiver object, or the thread that initiated the lookup.
This was done correctly for the trivial cases of empty host name or
cached results, so the code generally existed. By moving it from a
global function into a member function of QHostInfoResult, we can
simply access the required data to construct and post the event.
As we process that posted event, we need to check that the context
object (which is already guarded via QPointer) is still alive, if
we had one in the first place. If we had one, and it's deleted, then
abort.
[ChangeLog][QtNetwork][QHostInfo] Functors used in the lookupHost
overloads are now called correctly in the thread of the context object.
When used without context object, the thread that initiates the lookup
will run the functor, and is required to run an event loop.
Change-Id: I9b38d4f9a23cfc4d9e07bc72de2d2cefe5d0d033
Fixes: QTBUG-76276
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QNetworkAccessManager::connectToHostEncrypted()/connectToHost()
creates 'fake' requests with pseudo-schemes 'preconnect-https'/
'preconnect-http'. QHttp2ProtocolHandler should handle this
requests in a special way - reporting them immediately as
finished (so that QNAM emits finished as it does in case of
HTTP/1.1) and not trying to send anything.
We also have to properly cache the connection - 'https' or
'http' scheme is too generic - it allows (unfortunately)
mixing H2/HTTP/1.1 in a single connection in case an attribute
was missing on a request, which is wrong.
h2c is more complicated, since it needs a real request
to negotiate the protocol switch to H2, with the current
QNetworkHttpConnection(Channel)'s design it's not possible
without large changes (aka regressions and new bugs introduced).
Auto-test extended.
Fixes: QTBUG-77082
Change-Id: I03467673a620c89784c2d36521020dc9d08aced7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
1. Use per-case QNAM objects
2. In a slots (connected to QNetworkReplies) - if an error detected - stop
the event loop (no reason to continue waiting) and then do normal
QVERIFY/QCOMPARE things.
3. In tests, check QTest::currentTestFailed after the event loop returned -
if an error was detected by a slot, no need to continue with QCOMPARE/QVERIFY
in the test itself.
Task-number: QTBUG-77053
Change-Id: I3827a629a2749becd3dc6eee7fd6994d96441e65
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
fix the bloody test for good - the idea to have a shared QNAM (shared
by test cases in this test) was somewhat wrong to start with.
Fixes: QTBUG-77053
Change-Id: I5755e96ec988e2dd546f527f3f902fc43914b0b7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The previous code handled only some error codes, in a very inefficient
way, for some code paths. This change standardizes error handling using
a helper function that maps winsock WSAE* codes to Qt error codes.
The test for connecting to unreachable hosts or ports is now more
generic, and enabled on Windows, where it passes in local tests,
but dependency on network configuration still makes it fragile,
so ignoring some failures without completely skipping the test.
[ChangeLog][Network][Windows] Correctly emit errors when trying to
reach unreachable hosts or services
Change-Id: Icaca3e6fef88621d683f6d6fa3016212847de4ea
Fixes: QTBUG-42567
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This reverts commit 9a25d27b9d58316dee5d2305135d2d74ad5d51e7.
The QSKIP is no longer needed as the imap server's certificate
was updated
Task-number: QTBUG-76610
Change-Id: I1007ce50d6f7f6258fdeb8894c66678a660b03ca
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When calling waitFor{ReadyRead,Disconnected} it will wait for data but
if the data is already received and the read notification has been
queued (and there's no more data coming in) it will return false.
By checking if a read notification has been queued and then handling
this we can easily take care of this scenario.
Fixes some flaky tests which missed the read data in waitForDisconnect
and similar.
Fixes: QTBUG-38385
Change-Id: Ic05d59883c1175783e56ff1822b6636c35aec874
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QSslSocket (OpenSSL backend) does not use mutex/locks during
a handshake, so we re-enable previously skipped tests.
This reverts commit 8c87a1402c.
Change-Id: I994b085f016f0eb18b3ba439a7041ea08cd3577b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If this callback is not set then OpenSSL will call the callback
used for <= TLS 1.2 unconditionally when connecting. If using PSK it
will call it again later once the preshared key is needed.
We don't currently handle the TLSv1.3 PSK, but we definitely should.
But for now we can work around it - when psk_use_session_callback is
called we simply change the PSK callback to a dummy function whose only
purpose is to restore the old callback.
This is mostly done to keep behavior the same as it is now for users
(and to keep our tests running).
Later we can add a new signal and handle this new feature properly.
Task-number: QTBUG-67463
Change-Id: I4aca4ae73ec4be7c4f82a85e8864de103f35a834
Reviewed-by: Simo Fält <simo.falt@qt.io>
In this threaded setup the server can sometimes have the data before it
calls "waitForReadyRead", what happens then is that we fail the wait and
as a result the test fails overall.
Let's check if we actually got some data after all and then continue if
we did. Since both the client and the server currently wait the same
amount of time (2s) the max timeout for the client was increased by
0.5s so it has some time to notice that the server got the message.
Change-Id: Ib5915958853413047aa5a7574712585bcae28f79
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit e79b1dcdf5)
Reviewed-by: Simo Fält <simo.falt@qt.io>
We use global object to store errors found by q_X509Callback.
Thus, we also use a lock/mutex. It would appear all tests
involving in-process server and QNAM are prone to intermittent
failures on our Windows VMs - it's always about timeouts due
to the client socket (QNAM) locking and the server socket blocking
main thread while trying to acquire the same lock.
The real fix is to get rid of global variable/locking, we'll
have it later (quite a change and requires a lot of accuracy).
Task-number: QTBUG-76247
Change-Id: Iffc90d9e16783f17f62e836e01c35f22681bdd39
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 91ab70d17f)
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
Fix test for systems that do not resolve their hostname to localhost.
Not using name resolution also makes the test more robust.
Change-Id: I558b9a975b9021536709db87fbf6a3b314f7ca79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
to test different h2 modes: "h2c" (clear text with protocol upgrade),
"h2" (encrypted, negotiating via ALPN extension), "h2-direct" (encrypted,
no ALPN), "h2c-direct" (plain text, no protocol upgrade). This patch-set
is an amendment to the recent fix in the protocol handler where we were
crashing in "h2c-direct" mode.
Change-Id: I3ff5ed1396a59b72b59a95f927d404ccd202d0b8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Hardcoding IP addresses and their respective DNS records is fragile.
We care about Qt producing the same result as other DNS querying tools,
so testing that instead.
Running a python script for this is easiest, and assumed to be quite
reliable.
In case where python fails/is not present, fall back to nslookup.
That tool is available on Linux, macOS, and Windows, although the
output it produces varies. This change implements very basic
line-parsing that can interpret the various results encountered
during testing on those platforms.
This also reverts commit bbaceff253fae13d8e56691bc9de7e1981db5118,
which blacklisted the tests that failed due to changes in DNS
records.
Use the opportunity to replace usage of gitorious.org.
Change-Id: I967de226bd603c805df7fe3ed4e871d92d2d0750
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The DNS entry for the host has changed, dig answers with dns.google,
not with google-public-dns-a.google.com. While developing a proper
fix to the test, blacklisting this particular lookup allows
integrations to pass in the meantime.
Change-Id: Id37da6b24554803bf4e2c84be5b949ded40566e8
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In the QNetworkAccessManager machinery we would treat "no-cache" as if
it meant "don't cache" while in reality it means "don't return these
cached elements without making sure they're up-to-date"
At the same time as this change is made let's add test data for
"no-store", which replaces the "no-cache" test data.
Fixes: QTBUG-71896
Change-Id: Ieda98f3982884ccc839cac2420c777968c786f6e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
Previous blacklisting 5c4e5032b5 only
covered RHEL 6.6 and RHEL 7.4. The problem however exists in all
6.x and 7.x distros as they have the same openssl.
This however leaves us the problem with future RHEL 8. This will
keep blacklisting these tests there as well. We need a way to blacklist
versions with a wildcard so that we could say RHEL-7.*
Task-number: QTBUG-46203
Change-Id: I2cc52ba2eac949214ecaa02e19d9e623d5befc49
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
'accept' breaks the order, making the static table unsorted and thus
std::lower_bound cannot find it and we always index it in a dynamic
table. Also, make this static table accessible to auto-test.
Plus fix some warnings quite annoyingly visible in qt-creator.
Fixes: QTBUG-74161
Change-Id: I47410f2ef974ac92797c9804aa55cb5c36a436c4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It fails on CI (Windows 10). Given our qabstractsocket disables
read notifications/stops emitting readyRead if it already has pending data
(unbuffered, aka UDP socket type) - make sure we do not suffer from this.
The change does not affect the test's logic (unless the logic was to fail),
it just makes it more fail-proof.
Change-Id: I6c9b7ded20478f675260872a2a7032b4f356f197
Fixes: QTBUG-73884
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
1. Fix erroneous logic, which was triggered in 'h2' mode (non-TLS connection)
- after the initial protocol upgrade/POST request was handled, the server
(on Windows specifically) was erroneously handling upcoming DATA frames by replying
with another redirect response.
2. Make the test less heavy by sending 1 MB of Qt::Uninitialize instead of 10 MB
- theoretically this could cause a timeout before the redirected request finished
successfully.
Task-number: QTBUG-73873
Change-Id: I961e0a5f50252988edd46d0e73baf96ee22eef3f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][qmake] A new feature "cmdline" was added that implies
"CONFIG += console" and "CONFIG -= app_bundle".
Task-number: QTBUG-27079
Change-Id: I6e52b07c9341c904bb1424fc717057432f9360e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
For some reason behavior of SecureTransport has changed from 10.12 to 10.13
and then to 10.14. On 10.13 SecureTransport fails upon receiving the server's
certificate with 'Unrecoverable error', before we can do a manual verification
and accept the certificate as trusted. Analysis of available source code
shows that they, apparently, do not like MD5 hash which our server is using.
Until certificate is updated on the server or we switch completely to
the Docker-based solution we have to BLACKLIST tests that connect to our
current network test-server. Oddly enough, on 10.14 SecureTransport is
less mean.
Task-number: QTBUG-69873
Change-Id: I7da1883e0970a2f6ddd8385f193b76116d6983e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Some tests were fixed and others were skipped/blacklisted.
Task-number: QTBUG-63152
Change-Id: Ica7df555f8d152ee589865911130525101d4b941
Reviewed-by: Liang Qi <liang.qi@qt.io>
By accident, when we erroneously tried testing TlsV1_3 on macOS with
SecureTransport (which does not support TLS 1.3) we hit this quite
subtle problem: it can happen that a server-side socket is never
created but a client (after TCP connection was established) fails
in TLS initialization and ... stops the loop preventing
SslServer::incomingConnection() from creating its socket. Then we
dereference nullptr.
Task-number: QTBUG-71638
Change-Id: I8dc5a4c53022a25aafe2c80a6931087517a48441
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
1. Remove the conditional inclusion of DTLS versions, they made difficult
and unnecessary ugly adding new protocols (something like TlsV1_2OrLater + 4).
2. OpenSSL 1.1.1 first introduced TLS 1.3 support. OpenSSL 1.1 back-end is
compatible with OpenSSL 1.1.1, but would fail to extract/report protocol
versions and set versions like 'TLS 1.3 only' or 'TLS 1.3 or better' on a
new context. Given 1.1.1 is deployed/adapted fast by different distros,
and 5.12 is LTS, we fix this issue by introducing QSsl::Tls1_3 and
QSsl::Tls1_3OrLater.
SecureTransport, WinRT and OpenSSL below 1.1.1 will report an error in case
the application requests this protocol (SecureTransport in future will
probably enable TLS 1.3).
Saying all that, TLS 1.3 support is experimental in QSslSocket.
Done-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Done-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Change-Id: I4a97cc789b62763763cf41c44157ef0a9fd6cbec
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
on macOS, the test seems to be stable nowadays.
Task-number: QTBUG-39986
Change-Id: I18430c3feb27a5bee5474e1eb95f7d89b25f00a9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Test that we don't silently replace an invalid TLS configuration with
the default one (for now, the only thing that is considered to be
non-valid - is having non-DTLS protocol set).
Change-Id: I6f714b009cf1345a085a3f26d638fc31330f1a94
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
A weird behavior of the DTLS server example, when linked with 1.0.2,
exposed that client code, requesting an invalid protocol (for example, SSLv3)
can end-up with connection encrypted with DTLS 1.2 (which is not that bad,
but totally surprising). When we check the protocol version early in
setDtlsConfiguration() and find a wrong version, we leave our previous
configuration intact and we will use it later during the handshake.
This is wrong. So now we let our user set whatever wrong configuration they
have and later fail in TLS initialization, saying -
'Unsupported protocol, DTLS was expected'.
Auto-test was reduced - the follow-up patch will introduce a new
'invalidConfiguration' auto-test.
Change-Id: I9be054c6112eea11b7801a1595aaf1d34329e1d2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
with a case when we fail to ignore/pre-set one of possible
verification errors.
Change-Id: I23b06243b61acef1ef3576c51529f3ef6601ba7d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When the connection has been encrypted we will,
in QHttpNetworkConnectionChannel::_q_encrypted, emit 'reply->encrypted'
in which user slots can be called.
In the event that the user calls abort it will, however, not abort until
the next time it goes back to the event loop (which might not happen
until after the request has already been sent).
Task-number: QTBUG-65960
Change-Id: I96865f83c47f89deb9f644c86a71948dbb0ec0d0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
That's actually how ignoreVerificationErrors (and QSslSocket::ignoreSslErrors)
are used to set the expected/known verification errors before handshake.
Auto-test updated too.
Change-Id: I9c700302d81ddb383a4a750fafd594373fb38ace
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This change frees the tests of their dependence on the Qt internal test
server (qt-test-server.qt-test-net). It makes the developers run the
tests out of Qt testing infrastructure.
If the user has installed Docker engine on their host, the test servers
will be built up inside separate Docker containers, and then, the test
case goes with the Docker-based test servers. Otherwise, the test case
will keep using the Qt internal test server.
Task-number: QTQAINFRA-1686
Change-Id: I518bc3675bfd658938509744b0e7e0610bc8bf66
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
More Qt-style and more natural, also, shorter names.
Change-Id: I97bd68a8614126d518a3853027661435dc4e080d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This patch renames rather awkward 'remote' into more conventional
'peer' (similar to what we have in QAbstractSocket).
Change-Id: Ifc45e538b8adf9cc076bd7aee693277829fd94dc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The logic seems to be simple - if client code on error signal
tries to close TLS socket and this socket has buffered data,
it calls 'flush' and 'transmit' or even 'startHandshake' as
a result, which in turn will set and emit error again. To auto-
test this, we initiate a handshake with pre-shared key hint
on a server side and both client/server sockets incorrectly
configured (missing PSK signals). We also do early write
into the client socket to make sure it has some data
buffered by the moment we call 'close'.
Task-number: QTBUG-68089
Task-number: QTBUG-56476
Change-Id: I6ba6435bd572ad85d9209c4c81774a397081b34f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
