Add more error messages on failures.
Task-number: QTBUG-25367
Task-number: QTBUG-25368
Change-Id: I064143a058b7b98d9d5eecab8b5da49f5307e1eb
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
In bind+connect scenario, rejected connection can trigger a read
notification while the socket is opened. But unlike UDP, reading from
the socket engine or emitting a readyRead() signal is not allowed for
the TCP socket in bound or connecting state.
To make a bind+connect scenario work properly, disable the read
notifications until a connection is established.
Task-number: QTBUG-50124
Change-Id: I7b3d015b0f6021fb9ff9f83560478aa5545f41f5
Reviewed-by: Richard J. Moore <rich@kde.org>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Icaa1edafcc6e2779fbd6dbc2c058544d6e07f1e9
Reviewed-by: Richard J. Moore <rich@kde.org>
Fix warnings:
tst_qtcpsocket.cpp:245:9: warning: private field 'numConnections' is not used [-Wunused-private-field]
int numConnections;
^
tst_qtcpsocket.cpp:1834:9: warning: private field 'exitCode' is not used [-Wunused-private-field]
int exitCode;
tst_qcheckbox.cpp:86:10: warning: private field 'tmp' is not used [-Wunused-private-field]
uint tmp;
^
tst_qcheckbox.cpp:88:10: warning: private field 'tmp2' is not used [-Wunused-private-field]
uint tmp2;
Below warning is caused by code #ifdefed for OS X only, make it a local variable:
tst_qlabel.cpp:114:16: warning: private field 'test_edit' is not used [-Wunused-private-field]
QLineEdit *test_edit;
Change-Id: I53c755545fe2e7ca1f053f40c8c0e50aec2efcdd
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This system is no longer in the CI rotation and we haven't had reports
of the same issues happening on later versions. Either the issues have
since been fixed or they were never an issue in Qt in the first place.
This commit has the additional benefit of getting rid of the following
shell error when qmake was run:
sh: line 0: [: =: unary operator expected
as /etc/lsb-release hasn't contained DISTRIB_CODENAME for some time and
proper quoting was never implemented (not even qtcpsocket.pro).
Change-Id: Ia0aac2f09e9245339951ffff13c829e910ee64e9
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This has been known to be broken for a while. Now it works: you can bind
and you'll retain the port (and the file descriptor) for the connect
call. Incidentally, in fixing the binding for more than one IP for the
hostname (with event loop), this commit fixes the setSocketDescriptor
XFAIL.
[ChangeLog][QtNetwork] Fixed a bug that caused both QTcpSocket and
QUdpSocket to close the socket and lose any bound ports before
connecting. Now bind()/setSocketDescriptor() followed by connect() will
retain the original file descriptor.
Task-number: QTBUG-26538
Change-Id: I691caed7e8fd16a9cf687b5995afbf3006bf453a
Reviewed-by: Richard J. Moore <rich@kde.org>
Actually, it tests the buffered QTcpSocket. Place it in
tst_qtcpsocket.cpp instead of tst_qabstractsocket.cpp.
Change-Id: I3055c4773d0de74c238be4f11b2d1c07ddad4485
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QAbstractSocket::close() always calls QIODevice::close(), which resets
QIODevice's internal read buffer. So it makes no sense to make same calls
from disconnectFromHost(). This made the closeCalled private member
superfluous.
Change-Id: I4ec64e9711490e44e737763e4ed7fb41bffe2556
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
If you don't have /etc/lsb-release, you'd get
sh: line 0: [: =: unary operator expected
Change-Id: Idb5c79f799879e4d32cd640ef74fb388227f831e
Reviewed-by: Richard J. Moore <rich@kde.org>
... because they are too unstable. We can check whether they are more
stable once the new network tests server is in place.
Task-number: QTBUG-38385
Change-Id: I5ced7cc1f89290812aa88f174a41965fd2ef7252
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In a slot connected to readyRead, if the app detects that the
buffer size is too small and increases it, it expects that
readyRead() will be emitted again.
setReadBufferSize() doesn't re-enable the socket notifier when
calling from within readyRead, and readyRead itself was missing
the code to do it.
Change-Id: Ia00a3066ad3ba09d5cfae0716adc5691ae96c3fa
Done-with: Thiago
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A handful of tests lack QT_NO_PROCESS guards, making them non-compilable
on Qt builds with no QProcess support. This commit does not change
QProcess-specific tests, which should be left out of the build using the
.pro file mechanism.
Change-Id: Iac8562428abc1f59ccbb23bf5c3a919785e41f12
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The new test server image will not have a SMTP service installed, and
the network self test does not check for that either.
Change-Id: I1063777832148e184de4ddf21d9154364f644e1e
Reviewed-by: Richard J. Moore <rich@kde.org>
... because SkipSingle was removed in Qt5, and a QSKIP would result in
the SSL tests not being executed.
This can be reverted once QTBUG-29972 is fixed.
Change-Id: I3663ee52f00c3f4391ce78cf63bd444656d79cb3
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Commit 5230d62fe added a #define NOMINMAX, which conflicts with a
NOMINMAX definition in the MinGW headers. Just use the same definition
as in MinGW to fix the gcc warning.
Change-Id: Ib21dd323ebbdca5d143e394c7631303e0c72541a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Replaced with qt-project.org test domain.
The connectToMultiIP auto test is still disabled due to lack of test infrastructure.
Task-number: QTBUG-23294
Change-Id: Icf01aabb0ae503291abdda4e8f773f8e0a08931a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Using the nullary version has the advantage that multiple calls
during a program run are much more efficient, since an inlined
atomic is used to store the result. It also ensures that
Q_DECLARE_METATYPE(T) has been used, whereas qRegisterMetaType<T>("T")
will happily register anything. So I've added the macro where it
was missing, or moved it to a central place when it existed
hidden.
In tst_qnetworkreply, this became a bit tricky, because a private
header is conditionally included, so moved the Q_DECLARE_METATYPE()
into a conditional section, too.
Change-Id: I71484523e4277f4697b7d4b2ddc3505375162727
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I19d3b2e9a5180b13deb828b55195404ef20be295
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
qdatetime.h uses std::min/max and on Windows windows.h (or some subsequent
header file) may under certain circumstances define min/max as macros.
The easiest way to prevent the windows header files from doing that is to
define NOMINMAX in the place right before windows.h is included. The other
way is to define min and max to min/max themselves to prevent windows.h
from doing its evil thing.
If a user of Qt (WebKit in this case) chooses the approach of defining
min/max to themselves and then includes qdatetime.h, then a subsequent
inclusion of windows.h doesn't work because qdatetime.h undefines min/max.
We should not enforce the type of workaround needed, therefore this patch
removes the workaround from qdatetime.h and requires user code that
happens to include windows header files before qdatetime.h (seldom case)
to choose either workaround.
Change-Id: I7347eec7369491a065e894cff557004e069453d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This is unfortunately still "most of them", because of QTBUG-24451
however some of the unit tests are still possible to test stably.
Also skipped test cases which would hang forever due to QTBUG-24451.
Bearer tests are not run, because they pass when test machine has no
wireless LAN, but fail or hang if it does (QTBUG-24503)
Change-Id: Icf99d45707102d2ef9219ed0b5ad521605716219
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Windows unhelpfully writes to only one byte of the output buffer
when getsockopt is called for a boolean option. Therefore we have
to zero initialise the int rather than initialising to -1 as was
done before.
This in general only works for little endian architecture, because
the word would look like 0x01000000 on big endian. So I have added
some compile time asserts in the assumption that windows is always
little endian. This is ok for comparisons with 0/false, but not
comparisons with true or nonzero values.
In the case of IPV6_V6ONLY, it is documented as DWORD (unsigned int)
but on some windows versions it is returned as a boolean triggering
the warning. I removed the warning, as the conversion to int works on
both LE and BE since it is only compared with zero.
Task-number: QTBUG-23488
Change-Id: I3c586d1ada76465fc045a82661f289920c657a4c
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Change the ifdefs in our own code (except openssl backend) to use the
new configure flag.
Change-Id: I8774734771c66b22164b5fae8fdb27814ac3df7b
Reviewed-by: Richard J. Moore <rich@kde.org>
Helper processes were not found properly on all network tests
when the test was run with "nmake check":
- tst_qtcpsocket
- tst_qtcpserver
- tst_qnetworksession
- tst_qnetworkreply
Task-number: QTBUG-24199
Task-number: QTBUG-24203
Task-number: QTBUG-24226
Task-number: QTBUG-24231
Task-number: QTBUG-24232
Change-Id: Ia4451b5a5e3fe9f81aba3837baf8292411f995d8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
