Note: This constitutes a break in Binary Compatibility.
Change-Id: I050587901725b701f20dd46475ae48aec28aa54d
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
, and make it strictly a POD struct.
Since this operator was only being used to set the initial (owned) value
of the reference count, the name of the function introduced here to
replace it makes that use case explicit.
Change-Id: I2feadd2ac35dcb75ca211471baf5044a5f57cd62
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These comments were mostly empty or inaccurate. Appropriate naming of
tests and appropriate placement of tests within the directory tree
provide more reliable indicators of what is being tested.
Change-Id: Ib6bf373d9e79917e4ab1417ee5c1264a2c2d7027
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Added emition of a slot connected using the new syntax, as well as a
functor
- Replaced the old connect_disconnect_benchmark by a new one. The old
one was of little interest as it tried to connect to every signal,
producing a lot of similar results.
The new test tests different ways of connecting and disconnecting
Change-Id: I3c04c24027252308f8942bcd9562110104cdb4e9
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Some of Qt's autotests depend on access to a test server. For each test
that used the test server, tests/auto/network-settings.h created a
global object to verify at startup that host lookups to the test server
will succeed (and abort the test otherwise).
There are two problems with that approach:
First, the sanity check happens before main(), and thus before the test
framework has started logging test results. This means that if the
sanity check aborts the test, the failure message will not be visible in
the test output if logging to a file or will cause the output to be
malformed if logging to the console in XML format.
Second, since Qt 4.7, the host lookup uses a class that connects to the
QCoreApplication instance, which doesn't exist before main(), and this
caused all tests that included network-settings.h to output an error
message from QObject::connect() at the beginning of the test.
Both of these problems are solved by removing the global object from
network-settings.h and instead performing the sanity check in the
initTestCase() function of each test.
Task-number: QTBUG-22876
Change-Id: Id49c1826906327bf571686cc11527f0265e5af44
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The moc tool is not aware of all defines (particularly those that are
compiler builtins) and does not correctly evaluate others that depend
on compiler builtins, such as Q_OS_FOO.
This commit reverts parts of the following commits, but is not a
complete fix as there were many instances of this problem in the tests
prior to those commits:
924d810dbd8aaff67510338d3f1197a55034062b253497b7447cfad460c59d2ff58f360cf6baa2d6
Change-Id: I947d797fe3ec76139ba1b55561cea569895662c5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Function pointers used as template parameters must have external linkage
according to the C++ standard. The _mm_lddqu_si128() and
_mm_load_si128() intrinsic functions are declared static in most
implementations, which means we need to wrap them in a non-static
function call to be used.
Change-Id: I4e316851df890d77999649d47654f7f9a35d4080
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Pull in recent changes in the 4.8 branch for the QMutex benchmark.
Change-Id: Ie1e9bff33cecafb36d3d12207100f09f99597f8e
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
qttest_p4.prf was added as a convenience for Qt's own autotests in Qt4.
It enables various crufty undocumented magic, of dubious value.
Stop using it, and explicitly enable the things from it which we want.
Change-Id: I48ab0ee64d8348cada2e6c7b27c67b6bbc36280d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Add new cases for custom types and QStringList.
Change-Id: I79f8d415be43774e6b2488e8a6a8028bf4a5fd45
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Moving three benchmark tests from 'tests/auto' to 'tests/benchmarks'.
Also removing 'qttest_p4' usage while we are at it.
- void asScrollingList();
- void cacheBenchmark();
- void contiguousCacheBenchmark();
were moved to 'tests/benchmarks/corelib/tools/qcontiguouscache'
Task-number: QTQAINFRA-353
Change-Id: Icbdd852f9c14c3df042d2e19abd42af6c645a3cb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
`make check' is intended primarily for running functional tests.
For the most part, it does not make sense to run benchmarks in the same
test environment as the functional tests.
Change-Id: I33b2cf1e833fc6b1d0b3525018945148ba2d3492
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Moving benchmark test from 'tests/auto' to 'tests/benchmarks'.
Also removing 'qttest_p4' usage while we are at it.
- void benchmark();
was moved to 'tests/benchmarks/sql/kernel/qsqlquery'
Task-number: QTQAINFRA-353
Change-Id: I241bb1a2fba1c1b5524c21e5941a6c5daf5a4a89
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
Which required porting the related unittests to qstandardpaths
Change-Id: I6eb63c46845f05cd29cc42b59872707526277c90
Reviewed-by: Thiago Macieira (Intel) <thiago.macieira@intel.com>
The previous commit removed SkipMode from the testlib APi. This commit
removes the parameter from all calls to QSKIP.
Task-number: QTBUG-21851, QTBUG-21652
Change-Id: I21c0ee6731c1bc6ac6d962590d9b31d7459dfbc5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
create() is symmetric with destroy().
Also rename the internal methods and fields to be
consistent (qDeleteHelper already had the "right"
name, though!).
This change will allow us to use construct() and
destruct() for something else: Placement new-style
allocation (QTBUG-12574).
The old construct() is still kept for now, until
the other repositories have been updated to use
create().
Change-Id: Iceb184af6cffcb0a634359cfc3516c718ba0c2f5
Reviewed-on: http://codereview.qt-project.org/6342
Sanity-Review: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QSKIP is intended to be used to skip test functions that are found at
run-time to be inapplicable or unsafe. If a test function can be
determined to be inapplicable at compile-time, the entire test function
should be omitted instead of replacing the body of the test function
with a QSKIP, which only serves to slow down test runs and to inflate
test run-rates with empty, inapplicable tests.
Task-number: QTQAINFRA-278
Change-Id: I95feba3edbfa092c0ef4d85bb8c6877bd6be698e
Reviewed-on: http://codereview.qt-project.org/6128
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is in preparation of removing testlib's
dependency on QtGui and QtWidgets.
Autotests that need QtWidgets api must
explicitly include it (since the types are no
longer provided by the QtGui master header).
Change-Id: Ifd15f72e2c553fba0c399c921957c4e955bb590d
Reviewed-on: http://codereview.qt-project.org/5191
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jo Asplin <jo.asplin@nokia.com>
Reviewed-by: Matthew Cattell <matthew.cattell@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The benchmark isn't exhaustive, but tests the functions
that are heavily used by QtDeclarative.
For performance reasons, QtDeclarative has its own
implementation of various QChar functions (in
qdeclarativeutils_p.h). But we want to make the actual
QChar functions as fast, so that QtDeclarative can also
use them.
Change-Id: Ic25f30651224c39f2824380d679b8500739f38c3
Reviewed-on: http://codereview.qt-project.org/4900
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
a) don't detach until an occurrence found
b) don't memmove every time an occurrence found
c) truncate quickly )
well, numbers are better than words:
before:
RESULT : tst_QList::removeAll_primitive():
2,617,902 CPU ticks per iteration (total: 261,790,171, iterations: 100)
RESULT : tst_QList::removeAll_movable():
2,547,540 CPU ticks per iteration (total: 254,753,960, iterations: 100)
RESULT : tst_QList::removeAll_complex():
16,852,099 CPU ticks per iteration (total: 1,685,209,906, iterations: 100)
after:
RESULT : tst_QList::removeAll_primitive():
73,520 CPU ticks per iteration (total: 73,520,442, iterations: 1000)
RESULT : tst_QList::removeAll_movable():
90,422 CPU ticks per iteration (total: 90,422,464, iterations: 1000)
RESULT : tst_QList::removeAll_complex():
9,667,073 CPU ticks per iteration (total: 9,667,072,670, iterations: 1000)
Merge-request: 1285
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
(cherry picked from commit b209fe3b1a51f64541067917e96de99f14ad65f3)
Change-Id: Ia26036ed741cefcf4b5868b7b2fc5eae8130d3dc
Reviewed-on: http://codereview.qt-project.org/4577
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This doesn't make sense, none of the other benchmarks do it, and it
breaks compilation for a release-only mac build.
Change-Id: I3bc73f670688d413afcae7fa88bab19f7b3dac33
Reviewed-on: http://codereview.qt.nokia.com/4017
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
And added a POD QBasicMutex. (QBasicMutex* can safely be
static_cast'ed to QMutex*)
The d pointer is not anymore always a QMutexPrivate.
If d == 0x0: the mutex is unlocked
If d == 0x1: the mutex is locked, uncontended
On linux:
if d == 0x3: the mutex is locked contended, waiting on a futex
If d is a pointer, it is a recursive mutex.
On non-linux platforms:
When a thread tries to lock a mutex for which d == 0x1, it will try to
assing it a QMutexPrivated (allocated from a freelist) in order to wait
for it.
Change-Id: Ie1431cd9402a576fdd9a693cfd747166eebf5622
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/2116
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
`make check' is intended primarily for running functional tests.
For the most part, it does not make sense to run benchmarks in the same
test environment as the functional tests.
Also, the runtime for some of these benchmarks is quite long, and some
of them share the same name as existing functional tests. These are
problematic.
Change-Id: I2ca4cfa24c73280a0b73e51423007eaff92085b8
Reviewed-on: http://codereview.qt.nokia.com/1794
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Makes the API symmetric with the other Lighthouse APIs.
Change-Id: I8a399f3c968ea35d4624711b31f2ac5bb94b7893
Reviewed-on: http://codereview.qt.nokia.com/1735
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
The distinction between 'examples' and 'demos' is completely blurred at
this point. We've decided, with the SDK people, to scrap the existing
terminology in favor of the word 'example' only -- distinguishing
between code snippets, walkthroughs, "demonstrations" can be done
via keywords or some other method.
Removing QT_INSTALL_DEMOS from all .pro files in Qt is still in
progress.
Change-Id: I86fc0e40d54baa54c5641fc6acbd8b67e4ad2789
Reviewed-on: http://codereview.qt.nokia.com/1034
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Following the RFC4122, provide the interfaces between QUuid
and QByteArray, they are simpler then toByteArray() and
relevant.
Thanks for the suggestion and brief code from Robin Burchell.
Task-number: QTBUG-19420
Reviewed-by: joao
(cherry picked from commit 06873e467d98ad60d827afae29500bf2ff783c03)
Change-Id: I4623ae3363f1d5affa45de73fac616bb67a9eaa1
Reviewed-on: http://codereview.qt.nokia.com/168
Reviewed-by: Liang Qi <liang.qi@nokia.com>
On Mac, MAP_ANONYMOUS and MAP_POPULATE are not defined.
Fix MAP_ANONYMOUS by defining it to MAP_ANON.
Fix MAP_POPULATE by removing it, because its usage was unnecessary in
this code (the page was explicitly faulted in a few lines later anyway).
Change-Id: Iead82e1a949b35fe3c304d38babac8d4dc6f0769
Reviewed-on: http://codereview.qt.nokia.com/162
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
