Mirror the behavior in unixmake.cpp and do actually install
/uninstall files in target.targets. This fixes the installation of
.debug files on MinGW for a Qt with -force-debug-info
-separate-debug-info.
[ChangeLog][qmake] Install/uninstall rules are now generated for
target.targets on Windows. This mirrors the behavior on Unix.
Fixes: QTBUG-81354
Change-Id: Ie9366f132ebd8e18680f32f2e52cec64dbd87e9a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Change b274f656b8 enabled the use of a
response file for application building specifically needed when building
an application for Android on Windows. The same cause can happen when
building a library too with a lot of object files, so the command for
the link step can be too long. So we expand the functionality to be
used for libraries too.
Task-number: QTBUG-71940
Change-Id: Ia6d1943bf33f6decb53f6e71a8dc65310d2f20a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We must use Windows line endings in .vcxproj files to separate command
lines of custom build steps.
This amends commit f65cfadd.
Fixes: QTBUG-81553
Change-Id: I8d257f3846af7006df7f8d462b8f44efdce6a1fd
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
We always pass the same value. The builtins are also using exactly this
"cd command" unconditionally.
This deduplicates the code at the call sites of
callExtraCompilerDependCommand a bit.
Change-Id: I5c412c815d50afdac55e1b45021f37f2545ce8f0
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Use the central callExtraCompilerDependCommand in the last place where
the code to call an extra compiler's depend_command was duplicated.
Note that this is in the "Bad hack" section. We're making this hack less
bad, but the comment still applies.
Change-Id: Iaa857af20ca46b2d73053d3e264c63124c87a41b
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Modifications of the CONFIG variable in the project file wasn't taken
into account in the handling of DEFINES_DEBUG and DEFINES_RELEASE,
because it was happening before the evaluation of the project file.
Moved the handling code into default_post.prf where the other *_DEBUG
and *_RELEASE variables are handled.
In practice that means: to avoid the addition of the NDEBUG define one
has to remove NDEBUG from DEFINES_RELEASE.
This amends commit 1456b809.
[ChangeLog][qmake] To remove the NDEBUG define that is added by
default in MSVC mkspecs, write DEFINES_RELEASE -= NDEBUG in your .pro
file.
Fixes: QTBUG-81569
Change-Id: I2ea5628653275a4e48ad002977d34969c0663815
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Source files that are right next to the project file result in an
empty "object subdirectory" if object_parallel_to_source is set.
We must not attempt to create empty directories.
Fixes: QTBUG-81271
Change-Id: I431f9fbe46f50fbbaa5d6a59966bfb059418036c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The use of the 'ordered' CONFIG option is known to not be efficient for
multi-core builds. This patch updates the documentation with an example
using the .depends modifier as well a discourage the use of 'ordered'.
Change-Id: I3575243a7c4138f0671d171441c932c3ad89a411
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
De-duplicate the code that calls the extra compiler's depend_command by
using the central function callExtraCompilerDependCommand. This one
actually tries to resolve dependencies unlike the removed code that
blindly resolved relative paths to the build directory.
This fixes dependencies reported by uic which need to be resolved
against what is in DEPENDPATH.
Fixes: QTBUG-80579
Change-Id: If482e50ff3eff716fefffee82004acc076b3a547
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
qmake itself does not use the variable, but Qt Creator does.
Fixes: QTBUG-77866
Change-Id: I313d1ebe32dbc1eeac8d2d79b519349c7097a5a6
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Since commit 9ab043b6 we're checking for invalid file paths passed to
Qt's file system engine. When initializing the deployment tool for VS
projects we accidentally passed a file path containing '\0'. Fix that by
using an infix QString, not QChar.
Change-Id: Ieae066d20ac290354febd420abce68f28649b365
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Requires a third definition for the source-compatible but deprecated
version.
Change-Id: I260ae79f4547f99eed701b10e0b25222f81cd5ff
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Setting the CONFIGURATION_BUILD_DIR variable to tell Xcode where to
place the final application bundle confuses Xcode when archiving
a project, and the archive ends up without the dSYM files.
Unfortunately we can't leave it up to Xcode to place the build
artifacts wherever it wants, as Qt Creator's iOS support expects
to find the artifacts in a well-defined place. Until we've taught
Qt Creator to find the artifacts for deployment where Xcode placed
them we need to keep this logic.
We now avoid setting the CONFIGURATION_BUILD_DIR variable unless we
really need to due to in-source builds. As long as we're dealing with
a shadow-build it's okey to set SYMROOT.
Change-Id: I9661c1c57725dc8ba5a21f8467b8b61834f2e64d
Fixes: QTBUG-74841
Task-number: QTBUG-52474
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reading of Cbor streams is substantially more complicated than writing
as it requires float16 support. When writing Cbor, we can just choose to
always write 32bit floats, even if we could compress the numbers into
16 bits.
We need Cbor writing in the bootstrap library, but we cannot easily add
float16 support.
Furthermore, Cbor reading is required for plugin support, but not Cbor
writing. It might make sense for some users to build a custom Qt with
Cbor writing disabled.
Therefore, provide two features, cborstreamreader and cborstreamwriter,
split up the code in cborstream.{h|cpp} into several files, and enable
Cbor writing in the bootstrap library.
Change-Id: I15450afb0e328a84a22ebca9379cffc4f900a75a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTextStream, reading a file with CR+LF newlines from an stdio FILE
handle that was opened without "b", will always return false in atEnd().
Changing the open mode from "r" to "rb" works around the issue.
Task-number: QTBUG-80443
Change-Id: Ib2eafc0c4c6a6d2bcaeea3036474549d2d9e1511
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Use O3 causes warnings when combined with O2, so just remove it.
Partially revert commit 11111c5a7d
Change-Id: Ifbf6e024e35933ecc3610d6efc3423589dab9a38
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since commit 059172c6 precompiled headers did not work anymore on
macOS, because the ${QMAKE_PCH_ARCH} string was suddenly appearing in
locations where it was not replaced with the actual architecture, e.g.
the directory where the PCH files are written.
Fix this by replacing the whole file path and not just portions of it.
Fixes: QTBUG-79694
Change-Id: I925d4ee8980a0de3205a0e387a516a5c6f8cfa4b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
When building an application for Android on Windows it is possible that
the command line will be too long when doing the link step. So the code
for generating a response file is moved to MakefileGenerator so it can
be used by the other generators easily. The same variables used by
MinGW can be used elsewhere then.
Fixes: QTBUG-71940
Change-Id: I6c331d12e9541a90a4a95e0154d0ea1c056489bc
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This can be expensive. We don't expect files to be added to the
directory while qmake is running, and if that happened, the result would
be unpredictable anyway.
Change-Id: I5db93132046c1284130bbe51ce1ecd2a14665206
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Precompiled headers were put in a directory which had exactly the same
name as the binary to be generated. This resulted in a failure with any
mkspec that used clang_pch_style. The g++-mkspec avoid this problem by
extending the directory name. This change adopts this technique for
clang mkspecs.
[ChangeLog][qmake] Fixed precompiled headers for the Clang compiler.
Fixes: QTBUG-72404
Change-Id: I471462e2bcb1e33f19d277c21acde0c04b1ffcd6
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
In turn, deprecate the QJsonDocument methods that deal with JSON binary
data. You should use CBOR for data serialization these days.
[ChangeLog][Deprecation Notice] The binary JSON representation is
deprecated. The CBOR format should be used instead.
Fixes: QTBUG-47629
Change-Id: Ic8b92ea36de87815b12307a9d8b1095f07166db8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We must check whether outputs or inputVars are non-empty before
accessing them.
This amends commit 68866b1a.
Task-number: QTBUG-79178
Change-Id: Iecf6dc705bac9bef5133ae2e5ceeace5f859f175
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The snippet uses the Unix touch command, not qmake's touch function.
Change-Id: I71d1460447249b8941ce4bdbb494bb419e13b119
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
