This requires 'configure -make tests' if you want to automatically
build autotests for a module by default.
You can still go into the individual tests/ directories and
'qmake && make check'
to build and run the autotests.
configure -developer-build will enable the tests by default,
like it did in Qt4.
Change-Id: If4d870987de0947a8328509dcc227fa9e6284201
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
For some reference platforms and SDKs we will need to pass in
extra paths. Currently users have to modify the mkspec to adjust
paths or set environment variables that will be picked up.
This change introduces the -device <name> and -device-option
<key=value> option. The key value pairs will be written to a
qdevice.pri and can be used by the qmake.conf of the device spec.
The reason to not save the key value pairs in qconfig.pri is
becase of the fact that the device spec loads the qdevice.pri
earlier than the qconfig.pri. qdevice.pri allows the mkspec
to set the compiler flags and qconfig.pri allows configure to
add to those compiler flags.
Done-with: Holger Freyther
Change-Id: I931a197b8be72397e1eedfee09502eefc01c9d4f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
This is a follow-up to comit 70a8833151.
The regular expression for CFG_HOST_ARCH was not updated in the above
commit.
Change-Id: I2baf0b42d851f1df096c2f6ad54aeec57940e661
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Intel CC 12.1 supports AVX2 but only with -march=core-avx2. The -mavx2
option produces a warning.
GCC 4.6 does not recognise any option.
GCC 4.7 recognises both -mavx2 and -march=core-avx2 so let's use the
latter for now. We may need to change to -mavx2 when there's an AMD
processor that supports AVX2 too.
Change-Id: I529240e6e6c2c0e3942d357e0320212d954fe4de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This also removes the check for SSE, but the check for SSE2 and
further technologies is kept. If SSE2 is present, then SSE is too. We
don't have any code that uses the original SSE instructions only.
Remove the CMOV detection, since we don't use that anywhere and we're
not likely to ever use them..
Change-Id: I3faf2c555ad1c007c52a54644138902f716c1fe1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The regular expression should look for underscores in addition to
alphanumeric characters.
Change-Id: Idc3dbd67291ec1420f818d74fba8413b1e7cbcf1
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Any message/error in mkspecs or qmake feature files ends up confusing
the current arch detection logic. Instead, search for
"Project MESSAGE: .* Architecture: <arch>".
Change-Id: I308932a5b75f3a1fcbc4fe30c74faf2e83b2d752
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
config.tests/unix/freetype.pri has a !cross_compile flag, so we must
find freetype using the proper detection methods. The detection was
inside an X11 section of configure, so move that out.
And use the results of that detection, now that QMAKE_CFLAGS_X11 isn't
used (since we're not building X11 in QtPlatformSupport).
Change-Id: Ic8f5cfb7263849bfb12967756def2b5aaa244872
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The bsymbolic_functions test was missing $SYSROOT_FLAG, so the linking
was always failing and the test falsely negative.
Also make the error reporting better: if the flag was requested, error
out if the check fails and report more information in -v mode.
Change-Id: Ie2615f8083e7e58d63d9ee9c23be937dc864b30d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
With the move to the QPA architecture EGL is now only required by
individual platform plugins and the configure script has been adjusted to
reflect this.
Change-Id: Ieadacef0b970f29752d9e3e36a007e5cbb005b0d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
The XCB plugin requries libxcb >= 1.5. Configure and
config.tests/qpa/xcb now check for this.
Change-Id: I96c688b79bf5b49fd3ecc4ddc12ebdc2d3788790
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Without this, QMAKE_RPATHDIR is empty and qt_module.prf's logic to turn
on absolute_library_soname fails, causing some modules to build without
absolute paths (eg. qtjsbackend's QtV8 framework).
Change-Id: If03136ca60a5d8a96a589e2d1034e5884fd6a1ac
Reviewed-by: Michael Brasser <michael.brasser@nokia.com>
Makes no sense to disable iconv based on QPA. This change will
make iconv as the "system" codec i.e the codec used for 8-bit
locale dependent conversions.
Change-Id: I4469e9c226b2411ac1338f61dabb84ec9c2ec603
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This patch ensures that additional runpaths passed to configure via
the -R switch are added to the QMAKE_RFLAGSDIR variable.
Previously, although runpaths provided in this way were appended to the
linker options when building Qt itself, they were not appended to
the QMAKE_RFLAGSDIR value written to mkspecs/qconfig.pri. This meant
that the DT_RPATH attribute was set incorrectly in binaries built from
projects other than Qt itself.
-----------------------------------------------------------------------
Configure flags Expected value Value before this fix
-----------------------------------------------------------------------
<none> DEFAULT_RPATH DEFAULT_RPATH
-no-rpath <empty> <empty>
-R X DEFAULT_RPATH:X DEFAULT_RPATH
-no-rpath -R X X <empty>
-prefix Y Y/lib Y/lib
-prefix Y -no-rpath <empty> <empty>
-prefix Y -R X Y/lib:X Y/lib
-prefix Y -no-rpath -R X X <empty>
-----------------------------------------------------------------------
DEFAULT_RPATH = /usr/local/Qt-${QT_VERSION}/lib
Change-Id: Iaf1809b528ebd249694cf41e004173e881ca48ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
There should be a clear QWidget free path for people with no interest in
legacy QWidget functionality. Adding this option to configure makes this
path readily accessible and hence testable.
Change-Id: If87c1063fcf4c46f5280836126c11999feaa9f8a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Do not try to detect the host or target architectures using uname or
similar, and do not override with the -arch or -host-arch configure
arguments. The configures will still accept the -arch and -host-arch
arguments, but it ignores them and instead outputs a warning stating
that these arguments are obsolete and should not be used.
Set QT_ARCH and QT_HOST_ARCH qconfig.pri variables based on the compiler
target. This is done by running qmake (twice when cross-compiling) on
config.tests/arch/arch.pro, which preprocesses a file that contains all
knowns processors.
On Windows, configure.exe has never run any config.tests before, and
does not currently have a function to run a program and capture its
output. Use _popen() to accomplish this (as qmake does for its system()
function). This needs to be done after qmake is built, as does the
mkspecs/qconfig.pri generation. As a side effect, the configure steps
have been slightly re-ordered, but the overall result is the same. The
displayConfig() call is moved to just before generating Makefiles, so
that it can show the detected architecture(s).
Change-Id: I77666c77a93b48848f87648d08e79a42f721683f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When cross-compiling, check for PKG_CONFIG_LIBDIR instead of
PKG_CONFIG_PATH. pkg-config searches for pc files in PKG_CONFIG_PATH
*and* the compiled in defaults (/usr/lib/pkgconfig). This means that
pc files from the host get found when cross-compiling.
Setting PKG_CONFIG_LIBDIR makes pkg-config search only in the path
set in PKG_CONFIG_LIBDIR.
Documented in the url below:
http://www.freedesktop.org/wiki/Software/pkg-config/CrossCompileProposal
Change-Id: I22dbf29c5691572b7cb8a5fce712ae7ba811670e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Config checks are done in the module.
We pick up the pkg-config stuff also in the module. There shouldn't be a
need to do this in configure anyway
Change-Id: I9ef73760511c6b684c6cd5dd13e7e581c588e7aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the feature is rather obscure and unlikely to be used by anyone.
Change-Id: I2dfb4ca4d5d1f210d385c013f46bc6389fd6ea2d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Logic was clearly always off kilter, and this was only defined for GUI
builds
Change-Id: Ie85c156510e7c450a5192408b4c365ff07ce2029
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
make is perfectly capable of doing shadow builds
Change-Id: I7e1c27cddc385b7a17ae5645b9cd26fa56d2f029
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
.qmake.cache is not necessarily accessible to other modules which depend on
information about whether we are cross compiling or not. We might as well
advertise this fact globally via the CONFIG variable in qconfig.pri.
Change-Id: I6dee3e6604e5ca1c775c5f9f834fe29b4e27adb8
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
this is oxymoronic: if a .qmake.cache is present, telling qmake the
project root is utterly pointless.
the windows variant never had this.
Change-Id: Iefc6e242ad7458dc699b955a3657f31f1ecf4c7b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the tool locations are now determined with qtPrepareTool(), which takes
non-installed qt builds into account already.
Change-Id: I17b2c5f4b181417f2a612be2f540768e7dc0ae4e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the problem this (probably) tried to solve has been solved via ordered
builds a *long* time ago.
Change-Id: I84c58076c864735eea4210ec60aa060fe3e5d97e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
We need qdoc in qtbase to be able to properly
modularize our documentation and build it
when building the different Qt modules.
qdoc does contain a copy of the qml parser from
qmldevtools, but this is the lesser evil compared
to how we are currently forced to genereate our
docs (and the fact that no developer can run
qdoc and check the docs for their module).
Change-Id: I9f748459382a11cf5d5153d1ee611d7a5d3f4ac1
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Reviewed-by: Martin Smith <martin.smith@nokia.com>
Do not write Q_BYTE_ORDER to qconfig.h in the configures. Instead,
we #define Q_BYTE_ORDER in qprocessordetection.h, since many CPUs only
support a single endian format. For bi-endian processors, we set
Q_BYTE_ORDER depending on how the preprocessor sets __BYTE_ORDER__,
__BIG_ENDIAN__, or __LITTLE_ENDIAN__ (instead of using a compile test
to do so).
For operating systems that only support a single byte order, we can
check for Q_OS_* in addition to the preprocessor macros above. This is
possible because qprocessordetection.h is included by qglobal.h after
Q_OS_* and Q_CC_* detection has been done. Do this for Windows CE,
which is always little- endian according to MSDN.
Change-Id: I019a95e05252ef69895c4b38fbfa6ebfb6a943cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.
the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.
-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.
adapted the qmake feature files and the qtbase build system accordingly.
Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Remove the -armfpa option the config.tests/unix/doubleformat*
detection. The places where we used QT_ARMFPA and Q_DOUBLE_FORMAT
has been removed as well.
Rationale: ARM FPA with GCC does not work with EABI. Qt currently
does not support compiling without EABI, making ARM FPA an
impossibility. It is unknown whether other compilers provide ARM FPA
support with EABI. Support for ARM FPA can be re-added in the future
should the need arise, but since ARM VFP is available for ARMv5 and up,
we should encourage implementors to instead use soft-floats or VFP.
Change-Id: I3671aba575118ae3e3e6d769759301c8f2f496f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
switch blocks are noisy. this is nicer.
reshuffled the LibraryLocation enum to make table lookups possible and
future-safe.
using pointer-free tables to avoid adding data relocations.
Change-Id: I70ec2c2142ce02a15e67284e4b285d754d930da3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
evidently, The Author had no clue that the compiler will do that
automatically.
as it happens, the windows configure already did it right.
Change-Id: I7ebc018c254b316205348874ffa527526329b630
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Prior to this change, explicitly passing -qpa to configure breaks compilation on Mac. This is due to a false dichotomy between MAC/QPA
Change-Id: I52cacf96ae8d8d203787f9bbade417f2c55ab3f1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This should make it less confusing for people building Qt 5 on Linux.
Change-Id: I3aa7151f790587d5944c837d701b1b1b580b4bc3
Reviewed-by: Alan Alpert <alan.alpert@nokia.com>
configure was unconditionally attempting to create two symlinks to
qconfig.h: include/Qt/qconfig.h, and include/QtCore/qconfig.h.
include/Qt doesn't exist any more, so this would always cause a
"No such file or directory" warning. Remove that one.
include/QtCore/qconfig.h is usually created by syncqt now, so this would
cause a "File exists" warning. Make that one conditional.
Change-Id: I8c6244dcbcf9765444f0d5c40c91a0ca192ecbcb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Direct use of pkg-config variables disregards the sysroot offset pkg-config
factors into consideration with the dedicated variables:
--cflags-only-I
--libs-only-L
these parameters exist exactly for this reason.
Change-Id: Ieecf31ebe0640f64b272b84fba22701aacf8f966
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
make the "evaluator" able to process simple variable expansions.
cache the processed spec, so it is not re-read for every variable.
Change-Id: I20e69ec7b65faa7d571e68dbfea6c21c79a62641
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
and run the configure checks with the values
Change-Id: Ie8e0072c686c6a7dce1d02e25a9c1abce4679d34
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
We no longer support universal ppc/x86 builds.
Change-Id: I8c4a1d087d02da1ad80d91a7a04147b37e81d74f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The logic here was wrong: test if the
target linker supports -rpath-link, and then set
it for both host and target via mkspecs/qmodule.pri.
Change-Id: Ie4da7ed2e06e784f9edb65a27290913ab838a8c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this was inconsistent with how qmake itself works, and was actually
wreaking havoc.
Change-Id: I5aa83cc88ffe7141cc0c31b03b76c48274f1ebdb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Remove config.tests/mac/defaultarch.test, but do the same type of
default arch detection, only using the qmake binary instead of compiling
an empty file. Qt 5 will only support 10.6 and up, which means we
only support i386 and x86_64 now.
Change-Id: I24949ac803b965c523b1ee45cf769e266dcde134
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The xarch.test and crc.test are not run by configure, so remove them
along with the related CFG_MACH_XARCH and QT_NAMESPACE_MAC_CRC configure
variables.
The kEventClassQt variable in qt_mac_p.h is also unused now, so remove
it as well.
Change-Id: I596ab9b493ce3164b6a4d40e8942479efc91b60d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
All platforms are PLATFORM_QPA now, so we want to
remove PLATFORM_MAC.
Do one of two things: either remove the
PLATFORM_MAC code path or test on BUILD_ON_MAC
instead.
Change-Id: I6037a1a5f79498d9e0b5c2607e3698319fc7f68f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@nokia.com>
Apply the sysroot argument for the endian test only for the test used
for detecting the target endianness, don't use --sysroot for the host
detection.
Change-Id: I53edda6ebfd06e73cc64f2561b707bd2ba052ae7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Put in qconfig.h whether qt is compiled with reduced relocations.
When using -Bsymbolic-functions (enabled by default on Qt)
but not -fPIE, the comparison of the function pointers fail
because the addresses are different in Qt, and in the executable.
Hence we now enable -fPIE by default on qmake, and force a compilation
error when it is not enabled and built with reduced relocations.
Done-with: Sune Vuorela <sune@vuorela.dk>
Change-Id: Ib3fdba06fab6e8a93b75b4c6cf16cc973ab335db
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
linuxinput becomes evdevmouse. The experimental touch code is removed,
now the plugin's purpose is solely to generate mouse events from
absolute and relative pointer events. The plugin key is EvdevMouse.
touchscreen becomes evdevtouch. The plugin key is EvdevTouch.
In case keyboard support appears some day, it will fit nicely in the
system by the name of evdevkeyboard or similar.
Some little udev code is moved to platformsupport so it can be shared
between the plugins. This may be extended later if more sophisticated
udev support is needed. N.B. the intention is to keep this as simple
as possible. We are shipping these plug-ins as reference examples, not
as full-featured drivers.
evdev and udev support has configure time tests from now on. This
means the "drivers" (generic plugins) will get built automatically
when the support is available.
Change-Id: Iaf6260b5c2edfb9f25d070d2764466725adc6b4e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Recent commits in src/corelib/arch have removed empty directories,
which cause configure to assume that the architecture is not supported.
This assumption is wrong, due to changes in
src/corelib/thread/qbasicatomic.h to include the correct QAtomic*
implementation based on compiler pre-defined macros instead of the
architecture found by configure.
Change-Id: I026958fb9af8af62e295e68a4643c37ac9395dc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QNX implements the POSIX version of iconv (with non-const function
signatures). However, it is still necessary to link with libiconv, unlike most
cases. Also, its iconv_open does not know how to handle an empty string.
Change-Id: I8654703e46b9c64503aca5521ce7fae1c97d7968
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For shadow builds configure creates syncqt script to shadow build
directory tree calling the original syncqt from qtbase source tree.
This wrapped script will add two default parameters when calling
the original script. Both parameters are overridden in
qtbase/mkspecs/features/default_pre.prf and are not needed except by
configure script itself in latter stages where the parameter should be
applied explicitly in shadow build condition branch.
In addition, it adds the qtdir parameter for the forwarded syncqt call to
indicate the location of qt sources for the syncqt. This also will give
correct qmake path for qtmodule-configtests script triggered from syncqt.
Changes are done both for Linux and Windows configure.
Change-Id: I307b2e76c203ee14b849f10ff629f9668da2f223
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The tiff plugin and bundled libtiff is moving to the qtimageformats
project on Gerrit.
Task-number: QTBUG-23887
Change-Id: I4c848232fdccddd7e7f54215f9eaa78dc4c3a53d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This removes the options to disable several modules, as they are in
separate repositories now and can be "disabled" by simply not compiling
them.
Note that this leaves some configuration options for these separate
modules in, as they have no own configures. This is ugly, but has to
stay that way for the time being.
Some other dead code had to go as well, just like accepting the obsolete
-qdbus option.
Change-Id: Ibb26e4f48ca8239c2c4396e4abefab4c87322be2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Added PCRE config.tests, and logic and command line options
(-qt-pcre and -system-pcre) for configure and configure.exe.
Change-Id: I5da2658191198dbcf48c07d7c5de1be1b884a7a5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The new atomic implementation chooses which header to include based
on what #define's are set by the compiler (i.e. __x86_64__ or
__i386__). Because of this, the qatomic_macosx.h header isn't used
anymore. This also means that the configure script does not need to
use or look for this file anymore, it should just use the normal
uname -m detection.
Change-Id: Ibf275488735483268286196952299c0e496dfd1f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The MNG file format is generally abandoned, and libmng has been
unmaintained for several years.
The MNG plugin and bundled libmng has been moved to the
qtimageformats project on Gerrit.
Task-number: QTBUG-21869
Change-Id: I946432347014ffde2b72307a5f8b166ca5553602
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
When set in configure it would be written to .qmake.cache and would only
apply when building Qt. We then had an override (that was also out of
sync, version-wise) in the g++ mkspec, which would also apply to apps
building agains Qt. This override did howerver not apply when using
the Clang mkspec.
We now move setting macosx-version-min to the common macx mkspec, shared
by both g++ and Clang, which will apply both when building Qt and when
building something against Qt. The latter since an application built
against Qt will not deploy on versions of Mac OS earlier than 10.6
anyways, so we might as well always set the minimum-version.
The modifications to the mkspecs will result in macosx-version-min
being passed twice when compiling qmake, as configure writes its own
makefiles and the mkspec parsing in configure has a bug where it will
lazily evaluate qmake-variables instead of evaluating them inline. This
is not a problem, and can be fixed in a later patch if seen fit.
Change-Id: Ib29503ad00a9dc00e0a50b0dbd9459e89a20dfbd
Reviewed-by: Zeno Albisser <zeno.albisser@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Qt doesn't use iconv on Windows, but configuring it will appear to
work and the build will complete. The result is that character
set conversions do not work.
Configure.exe already disables iconv for Windows.
Change-Id: I449a00860c2e77e6cdd8cdcf7108621c684207bf
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Qt 5 will support single-arch builds only, for two
reasons:
1) PPC is very deprecated at this point, x86_64
is becoming standard.
2) V8 only supports single arch builds.
As a workaround, build twice and use lipo to
create universal binaries.
This commit also removes the -cocoa and -carbon
options.
Change-Id: I428f096a02f59ec2b3e693150e0e08358198de83
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
It's only used by Maemo and Harmattan, thus not needed in Qt5.
Change-Id: I8638f4fc63637be88d1aa584cde7e3a4116f2de6
Reviewed-by: Alex <alex.blasche@nokia.com>
At the moment users of Qt must detect if it was compiled with SSL
support by testing for QT_NO_OPENSSL. This means that any code that is
conditionally compiled this way is tied to the presence of the openssl
backend. This commit makes it possible to implement new SSL backends
during the Qt5 lifetime without breaking this code. People can still
test for QT_NO_OPENSSL if they really need openssl, but if they simply
want to know if there's SSL support at all they should use this define
instead.
In addition, this commit changes the public API headers to use the new
define.
Change-Id: Ib57a71aa65836ac9351f120a487bfeb8009d9515
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Prevents build errors when xrender is not present.
Change-Id: Ib80d52109dd0bcd63ba865c5f6e143961f3c20e6
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
There's no good reason to still differentiate between 'Nokia' developers,
and Qt developers outside of Nokia, inside configure. Just use
-developer-build -opensource -confirm-license.
Change-Id: I8726947dae0c70412eb52bf9d88eda4aa061ef26
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.
The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.
Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These should go into qmodule.pri, rather than .qmake.cache, as they
make sense for all Qt modules - not only qtbase.
Fixes link failure when building qtdeclarative with jom on Windows.
Change-Id: I3e8b207e1808cb23af58b865a160c2fafa906288
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
In a Qt 5 world, these have no relevance, so remove them.
Task-number: QTBUG-23022
Change-Id: I2f52c7aa1fcb8234046dd95b4d702791d20514fa
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This malloc-replacement library is marked experimental and disabled by
default. It is also Unix-only.
On linux (GNU C library, actually) ptmalloc graduated to become the
native allocator, according to its webpage (http://www.malloc.de/en/),
making the need to have a copy here significantly lower.
Anyway, there is nothing preventing interested parties from adding this
library to their own setup and very little value in keeping it around in
qtbase.
Change-Id: I2b1c798ca38b59bb767b44d6e5190080ec6ecdf4
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
reduce-relocations will enable the -bsymbolic-functions
linker option when supported by the linker. This
reduces the amount of relocations required within
a shared library, by binding symbols locally where
possible.
Change-Id: I00ddc408df79097857d6b36f7fc1b0f510362fcc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add mips to the list in configure and the v8.pri, build the existing
MIPS files. The result has not been verified to work.
Change-Id: I0f4fd29cd9752d32b6d87e0df0e888822f40ac0a
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
Tests will install under $$[QT_INSTALL_TESTS].
TESTDATA may be used to install additional testdata required by the
test.
The default install rule may be disabled by
CONFIG+=no_testcase_installs.
Change-Id: I204de60c8e844775906ffd016ca50bffbb414142
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
A V8 snapshot is a serialized representation of the JavaScript heap.
Using a snapshot can vastly speed up V8 initialization.
This commit introduces a new tool, mkv8snapshot. mkv8snapshot is
automatically invoked as part of building QtV8, and generates a .cpp
file which is compiled into the QtV8 library.
Because mkv8snapshot itself needs to initialize the V8 environment
the non-snapshot way (i.e., by evaluating thousands of lines of
JavaScript), it needs to build all of V8. This means that V8 is
effectively built twice when snapshots are enabled.
When cross-compiling, only host=i386 and target=arm is supported,
since that's the only relevant case for which V8 currently
supports a simulator. mkv8snapshot is built and run as a host tool
(using the simulator), and generates a snapshot that will be used
on the target.
Task-number: QTBUG-21152
Change-Id: I9270652f129505508f78db8b0a39fbf57dc8b86d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Make the indentation sensible.
Remove comments which merely repeat the name of a variable on the next
line.
Change-Id: Ic3ecaaaba61795aeee10299ee44523eb725ecad9
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
To instrument a Qt application or library with the TestCocoon coverage
tool, do `CONFIG+=testcocoon' in the application .pro file.
To instrument Qt itself with testcocoon, use the `-testcocoon' configure
option.
Change-Id: Ie77109a078d11ea51f7a073621e0df9c752c44ae
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
We have the following scenario: Either you build a release package
without asserts, or a debug package with asserts. However, in embedded
development, we need asserts also in release packages. This flag allows
you to build a release package, but Q_ASSERTs still fire.
Change-Id: Icd1dd4dd63c3cafecf515b40741263d902ad42d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... instead of adding them to all C*FLAGS. This makes it
possible to pass -Wno-warning-name to configure to disable
certain warnings enabled by default (which didn't work
previously). This also has the added benefit that only projects
that have CONFIG+=warn_on will get the extra warning flags.
Change-Id: I7bbc100155e02e7ccb9ac3be14bd8f585b7bc39b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
These will be passed on as extra C*FLAGS to the Qt build. Useful for
adding -Werror or -Wno-something-or-other.
Change-Id: Ifbbf63261573edd024de951082d99658eb443a3f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Remove Trolltech from the default install path.
Since QPA is the default now, so we don't need to treat it
specially from regular Qt versions. It is the regular
Qt version.
Change-Id: I0bde75c90d2d5944be192e1249bc1a9371c70fcb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Proper multipoint touch support was only introduced in XInput2.1, but Harmattan uses
a tweaked version of XInput2.0 that transfers touch data through mouse events.
This patch applies on the xcb plugin a subset of the changes that were applied on the
Qt 4.7 that was shipped to Harmattan to get similar multipoint touch support.
Change-Id: Ifda7ad40de29d7ded1443d4f78b3ec3807303a9f
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Using the first pkg-config in PATH is prone to errors when
cross compiling. This is a known issue, and `configure' already
avoids using pkg-config for cross compiling (unless -force-pkg-config is
used). However, there was previously no way for a .pro file to test
whether or not the user had passed -force-pkg-config.
Let !contains(QT_CONFIG, no-pkg-config) be used to test whether or not it
is safe to run pkg-config.
(cherry picked from commit 53794d94994cb3149581b1a91762dfa2d6defac0)
Change-Id: I53794d94994cb3149581b1a91762dfa2d6defac0
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-on: http://codereview.qt-project.org/6488
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
If Qt is built without QtConcurrent, the relevant autotests should be
excluded from the build, rather than building empty tests that appear
to pass and thus produce confusing test results.
Change-Id: I43bafcb0ffa42e8981bec4e27bf6a23a28d86df9
Reviewed-on: http://codereview.qt-project.org/6395
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Passing -no-xcb or -no-wayland was enough to get a build with neither
but the error message says you need to pass both. Fix the logic.
Change-Id: I2d554d371b603e7df7bc07e1b4d5271ba31243f0
Reviewed-on: http://codereview.qt-project.org/6099
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Require the user to pass -no-xcb and -no-wayland in order to produce
a build that has only the minimal plugin available.
This prevents "useless" builds from being accidentally created.
Change-Id: If2f7f516a52b75998f3ae7bf802f89f93f6e8218
Reviewed-on: http://codereview.qt-project.org/6005
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The * was not appearing against the default for the -xcb switch because
of a spelling mistake.
Change-Id: I3491cc9772d02179711b0d474db7ab2ef2398e88
Reviewed-on: http://codereview.qt-project.org/6003
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lincoln Ramsay <lincoln.ramsay@nokia.com>
The only place that now still knows about it is moc,
so it can still parse old headers.
Change-Id: Iafec080f99c67560974e9ebc0cbfb27d9a4b2d6f
Reviewed-on: http://codereview.qt-project.org/5755
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
If qtbase was configured to build both debug and release versions of
libraries, it makes sense for any modules we are building to do the
same by default.
Change-Id: Idb5f78a7414b6ed2bacf295ad01f259fca435410
Reviewed-on: http://codereview.qt-project.org/4702
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
configure is currently whitelisting a set of architectures which are
known to be capable of building V8. macosx was omitted from this list.
Note that we don't attempt to differentiate between different macosx
architectures; we expect any mac which is capable of building Qt5 at all
is also capable of building V8.
Change-Id: I345f2a446d650cbeb1e2ad81656cdbeea6fa0d9a
Reviewed-on: http://codereview.qt.nokia.com/4293
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
QPA mkspecs are of the same form as the rest, we don't want to parse
this in a different way.
This was resulting in the COMPILER variable being wrong and in turn
QT_GCC_*_VERSION and the like not being set.
Change-Id: Ia703be95dbe586e1a8e897c3e244202363fb8c6a
Reviewed-on: http://codereview.qt.nokia.com/4195
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
First of all, the -v8 option was missing from the set
of "Qt style yes options", so it wasn't even recognized.
Second, when the value is "auto" (the default), v8
should only be enabled if we are building for a supported
architecture. Currently that's i386, x86_64, and arm.
(When cross-compiling, CFG_ARCH will contain the target
architecture, which is what we want to check.)
Third, if -v8 is passed but the architecture isn't
supported, configure should issue an error.
Change-Id: I579597bc0d81c3097ee96a29493f5f8112be7edd
Reviewed-on: http://codereview.qt.nokia.com/4193
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The build-key is an old mechanism to work around binary
incompatibilities in GCC 3.x versions. Modern GCC has not broken binary
compatibility since 3.4, making this mechanism obsolete.
The cache value stored now only includes Qt version, the debug/release
boolean, and the last modified time for the plugin. Old 4-value keys
will be replaced with new keys as the plugins are reloaded the first
time.
This also removes QLibraryInfo::buildKey(), which is a source-incompatible
change.
The UNIX and Windows configure tools have been updated to stop
outputting the QT_BUILD_KEY preprocessor directive.
See also:
http://lists.qt.nokia.com/pipermail/qt5-feedback/2011-August/000892.html
Change-Id: I7d06969a370d3d2c6de413c1230d9d6789cbf195
Reviewed-on: http://codereview.qt.nokia.com/3977
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Declarative no longer used QtScript, it uses V8.
This check in the configure script was stale.
Change-Id: I3c598c0343fc421fdd191a256e07eaa6f4e80058
Reviewed-on: http://codereview.qt.nokia.com/4077
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
This adds Aaron's copy of V8 to src/3rdparty/v8 (as a
git submodule), and builds it as a "normal" Qt library
(without any dependencies on Qt itself).
The library can be added to a project with
QT += v8-private
V8 API headers are available as private includes, e.g.
#include <private/v8.h>
The API is private because we're exposing a third-party
API directly, and we don't want to (and cannot) make
source or binary compatibility guarantees for it.
Since we want the V8 public API headers to be private
headers in Qt, syncqt and sync.profile were extended to
understand a new configuration option, the
@allmoduleheadersprivate array, that tells syncqt whether
all the library headers should be treated as private even
though they don't follow the _p.h Qt convention.
The V8 project files, patches and autotests are copied
from the QtDeclarative repository. The next step after
this commit is to remove QtDeclarative's copy of V8 and
link with QtV8 instead.
Task-number: QTBUG-20963
Change-Id: Ib8820362cdbc8fa662a5e97db841656cf38d1b62
Reviewed-on: http://codereview.qt.nokia.com/3092
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Work-around for bug in XCB which causes a xcb_wait_for_reply to block
if xcb_poll_for_events() is called simultaneously from a different
thread. If the XCB version is too old this work-around causes even
more problems, so we kill two birds with one stone by only using the
work-around if the XCB version has the recent
xcb_poll_for_queue_event() function, which we also need to read
events from a separate thread with reasonable efficiency.
Change-Id: I8a899dad6ded381ce42cba0112e77da3c8aa6887
Reviewed-on: http://codereview.qt.nokia.com/3612
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
separate_debug_info was previously stored in .qmake.cache, and
therefore only affected qtbase. Store it as a QT_CONFIG setting instead,
and add it to CONFIG for all Qt plugins and modules.
Change-Id: I940c8cb30f1c42c85f4d0342e6a482f20677ff04
Reviewed-on: http://codereview.qt.nokia.com/2975
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Minimal patch to change the default. PLATFORM_MAC
is now obsolete, and at some point we need to go
through configure and remove it or replace usages
with for example BULD_ON_MAC.
Change-Id: Ic6a8609158b6021ead23d8731e683ef3a51cc4d7
Reviewed-on: http://codereview.qt.nokia.com/2780
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This logic should be used for all mac platforms.
Currently it is erroneously skipped for qpa on mac.
Change-Id: Ibc8e0bb38d4c08f48292639c614bc328c703b1bc
Reviewed-on: http://codereview.qt.nokia.com/2836
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
debug/release is always supposed to default on for platforms where
debug/release affects linkage (i.e. mac and windows). Previously, it
did not correctly default on for qpa mac builds.
Change-Id: I8d3c418f3fb787136ab120872fdd4d2ebf82c90e
Reviewed-on: http://codereview.qt.nokia.com/2796
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Previously, the mac arch was only put into qconfig.pri for carbon
and cocoa builds. Make sure it is also available for qpa builds.
This is needed for projects which need to select architecture-specific
sources in their .pro file.
Change-Id: I5f72e3b699b11dafc4dae052620913f2b9b81d0a
Reviewed-on: http://codereview.qt.nokia.com/2313
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
And try to fail a bit more gracefully if it isn't.
Change-Id: I62e01c0536aa0a032940d6a9a5ccf5edcfeef221
Reviewed-on: http://codereview.qt.nokia.com/2109
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
All QT3_SUPPORT functionality will go away with Qt 5
in any case, so let's turn it off in configure now.
Change-Id: Ic8cf483704ad0f1484b2cda097b8e0c915ff2bef
Reviewed-on: http://codereview.qt.nokia.com/824
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Liang Qi <liang.qi@nokia.com>
Remove the references to demos from configure and qtbase.pro.
This is done because of the merge of the demos and examples in Qt.
Everything will be added as an example.
Change-Id: Iec040f5c719384c7aabba971316de40195ed3a69
Reviewed-on: http://codereview.qt.nokia.com/619
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QtPlatformSupport is a static library. Platform plugins are meant to
link against this library to pull in dependencies such as fontengines
and convenience functions for finding the right GL configs. The linker
will only pull in the symbols used, so the size of the library doesn't
really matter
The reason is that these are local to the build, and should not be
present inside the qmodule.pri file, because this file is installed.
Change-Id: I2207f2bf068b1aafd14e60d106c7028ca53d5efd
Task: QTBUG-19585
Reviewed-on: http://codereview.qt.nokia.com/238
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The xcb platform plugin can now be enabled using -xcb at configuration
time. A configuration time compilation check will be added at a later
point.
Reviewed-by: Samuel Rødal
