If a transfer timeout is set for QNetworkRequest, downloads
and uploads are aborted if the timeout expires and bytes
haven't been transmitted in either direction.
Task-number: QTBUG-3443
Change-Id: I702d223d673f0c6612343dc9d053815acfcb61b8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test fails because the server (reasonably) sends a https redirect.
Let's not rely on external servers serving http indefinitely.
Fixes: QTBUG-71953
Change-Id: I20937b2c6f268519636349bae8c99c1afe64fcf9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As it was superseded by HTTP/2. Bye, Speedy. Since it's Qt 6,
we also fix the attribute's enumerator to fit our coding
convention with HTTP2AllowedAttribute becoming Http2AllowedAttribute,
and the same for HTTP2WasUsedAttribute.
tst_qnetworkreply in 'benchmark' directory of qtbase/tests
was updated - we have the logic they tested in preConnectEncrypted
in tst_http2 now.
Manual qnetworkreply test was updated (instead of SPDY in NPN failure
we can use H2, the second test was deleted - again, auto-tested in
tst_http2).
Change-Id: I559c140c333ddf72664911c6e275b1d0d2b980a9
Task-number: QTBUG-78255
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If the domain passed down is an actual TLD that's the subject of a *
rule, e.g. "ck" subject to *.ck, then we were finding no dot in it and
concluding that it couldn't be the subject of a * rule.
Added a test for the specific .ck case and commented on where we could
get some canonical test data that I tripped over while researching
this. Cross-reference the cookie-jar test from the QUrl test, too.
Fixes: QTBUG-78097
Change-Id: Id858a9dae22e6b306a68df3fc199e0160f537159
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I was observing rare crashes on my mac, where I was using SecureTransport.
This would imply both the client (the test) and the server were working
in h2c mode. But this is against the test's logic - the first request
will be HTTP/1.1 (and upgrading protocol) and I wanted to send 3 HTTP/2
requests instead.
Fixes: QTBUG-77476
Change-Id: I048ca242e2096ca36dd112277807d1fee530150c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
And send it in our 'SETTINGS' frame. Add an auto-test
for this and (as a bonus) - fix a bug accidentally
introduced by the previous change.
Task-number: QTBUG-77412
Change-Id: I4277ff47e8d8d3b6b8666fbcd7dc73c827f349c0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Similar to TLS configuration that we can use on QNetworkRequest,
we can configure different options in our HTTP/2 handling by
providing QNetworkAccessManager with h2 configuration. Previously,
it was only possible internally in our auto-test - a hack with
QObject's properties and a private class. Now it's time to provide
a public API for this.
[ChangeLog][QtNetwork][QNetworkRequest] Add an ability to configure HTTP/2 protocol
Change-Id: I80266a74f6dcdfabb7fc05ed1dce17897bcda886
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
some assumptions were incorrect: our test server immediately sends
its SETTINGS frame, as a result we have to reply with client preface +
SETTINGS(ACK). So QVERIFY(!prefaceOK) was wrong from the beginning and
was only passing by pure luck.
Change-Id: Ie43f0d4ac41deb0e5339badaae6149a9b2f9d9b3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
One of the tests above was unsetting a variable that enforces
the use of a temporary keychain. We have to set it back, otherwise
the test is failing. What surprises me though - why I had this
problem only locally and not on CI? Apparently, SecureTransport
is not covered by our configurations ...
Change-Id: I0ff1e3e304632869391ed61213c245b949d8c778
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QNetworkAccessManager::connectToHostEncrypted()/connectToHost()
creates 'fake' requests with pseudo-schemes 'preconnect-https'/
'preconnect-http'. QHttp2ProtocolHandler should handle this
requests in a special way - reporting them immediately as
finished (so that QNAM emits finished as it does in case of
HTTP/1.1) and not trying to send anything.
We also have to properly cache the connection - 'https' or
'http' scheme is too generic - it allows (unfortunately)
mixing H2/HTTP/1.1 in a single connection in case an attribute
was missing on a request, which is wrong.
h2c is more complicated, since it needs a real request
to negotiate the protocol switch to H2, with the current
QNetworkHttpConnection(Channel)'s design it's not possible
without large changes (aka regressions and new bugs introduced).
Auto-test extended.
Fixes: QTBUG-77082
Change-Id: I03467673a620c89784c2d36521020dc9d08aced7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
warning C4573: the usage of 'tst_QNetworkReply::connect' requires the
compiler to capture 'this' but the current default capture mode does not
allow it
Change-Id: Ic9fd526fedf7c52e53e2b1136834c10bf4cd0ea9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
It's not implemented
Change-Id: I56abb0a5fe0e6d5c2f5f678adadafed395456902
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
1. Use per-case QNAM objects
2. In a slots (connected to QNetworkReplies) - if an error detected - stop
the event loop (no reason to continue waiting) and then do normal
QVERIFY/QCOMPARE things.
3. In tests, check QTest::currentTestFailed after the event loop returned -
if an error was detected by a slot, no need to continue with QCOMPARE/QVERIFY
in the test itself.
Task-number: QTBUG-77053
Change-Id: I3827a629a2749becd3dc6eee7fd6994d96441e65
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
fix the bloody test for good - the idea to have a shared QNAM (shared
by test cases in this test) was somewhat wrong to start with.
Fixes: QTBUG-77053
Change-Id: I5755e96ec988e2dd546f527f3f902fc43914b0b7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As in QVarLengthArray (c34242c679), this will
probably bite someone someday, so fix it before there's a bug report.
Use ctor delegation to keep code size increase small.
There's also the benefit that default-constructing a QNetworkRequest now
no longer creates an expensive QUrl object just to destroy it unused again.
Add an auto-test.
Change-Id: I5ceb5402ca3946048d695244d1b1c36564a1e80a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QNetworkSession has a concept of UsagePolicy which can disable
background* transfers to conserve battery or bandwidth. However, it is
only possible to change the policy through
QNetworkSessionPrivate::setUsagePolicy which currently doesn't have any
callers outside of our auto tests.
*background = transfers not initiated directly by the user, but needs
to be marked as such by the application developer.
Change-Id: I92c4abccaca040612b4795abe7c52d68a2d21749
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QSslSocket (OpenSSL backend) does not use mutex/locks during
a handshake, so we re-enable previously skipped tests.
This reverts commit 8c87a1402c.
Change-Id: I994b085f016f0eb18b3ba439a7041ea08cd3577b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Ibdd3f63d9069c3f01dfe8431bcc64bde4f2aa569
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We use global object to store errors found by q_X509Callback.
Thus, we also use a lock/mutex. It would appear all tests
involving in-process server and QNAM are prone to intermittent
failures on our Windows VMs - it's always about timeouts due
to the client socket (QNAM) locking and the server socket blocking
main thread while trying to acquire the same lock.
The real fix is to re-write our verification callback so that
it does not need locking/does not block the main and 'http'
threads as a result. But such change is too dangerous for
5.13.0 so we instead have a somewhat handicapped/reduced
test on Windows.
The fixed QSSlSocket will go into 5.13.
Task-number: QTBUG-76157
Change-Id: Ia54701bcb3f6f079a69e52c8904ac3efcee4a787
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
to test different h2 modes: "h2c" (clear text with protocol upgrade),
"h2" (encrypted, negotiating via ALPN extension), "h2-direct" (encrypted,
no ALPN), "h2c-direct" (plain text, no protocol upgrade). This patch-set
is an amendment to the recent fix in the protocol handler where we were
crashing in "h2c-direct" mode.
Change-Id: I3ff5ed1396a59b72b59a95f927d404ccd202d0b8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In the QNetworkAccessManager machinery we would treat "no-cache" as if
it meant "don't cache" while in reality it means "don't return these
cached elements without making sure they're up-to-date"
At the same time as this change is made let's add test data for
"no-store", which replaces the "no-cache" test data.
Fixes: QTBUG-71896
Change-Id: Ieda98f3982884ccc839cac2420c777968c786f6e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
