ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QStandardItemModel::setItemData replaces the content of an item data
with the new values rather than updating/inserting which is
the behavior for QAbstractItemModel. This patch aims to unify the
behavior.
[ChangeLog][QtWidgets][QStandardItemModel] Fixed setItemData()
incorrectly deleting unmodified data. That behavior is not
following QAbstractItemModel's documented behavior which is
no modification of data not provided in parameter.
Task-number: QTBUG-45114
Task-number: QTBUG-10872
Change-Id: I2be40cee372b68d9f71c976548ecda6dc3011241
Reviewed-by: David Faure <david.faure@kdab.com>
Commit ba1b73175b tried
blacklisting this autotest in Windows 7 only. This however
does not work. We can't pin point blacklisting to a specific
Windows version.
Task-number: QTBUG-63122
Change-Id: I5edb5b56fd86ad194214818a838db9cfd6be2ad1
Reviewed-by: Simo Fält <simo.falt@qt.io>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Convert QSysInfo/QOperatingSystemVersion to __builtin_available where
required or possible, or to QOperatingSystemVersion where
__builtin_available cannot be used and is not needed (such as negated
conditions, which are not supported by that construct).
Change-Id: I83c0e7e777605b99ff4d24598bfcccf22126fdda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Swapping from RHEL 7.2 to 7.4 produces new autotest failures.
Task-number: QTBUG-63433
Change-Id: I3e59aa73b5874cfec06e166f521e06b0c7829743
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
From: https://tronche.com/gui/x/xlib/events/exposure/expose.html
"The circumstances in which the X server generates Expose events
are not as definite as those for other events."
On windows with XCB_GRAVITY_NORTH_WEST flag set we should not get
expose events according to e2665600c0,
but as stated earlier this might not always be true.
Nevertheless, sometimes we get expose event from X server when shrinking
window, but most of the time we don't. Make the test not flakey by
checking that we get at least 1 expose event, instead of exactly 1.
Now running test 500 times in a loop does not fail.
Task-number: QTBUG-63424
Change-Id: I8004e622020cc09e11b7d592faf6d9ee1b9cfee2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The function was only well defined from RGB32 and ARGB32PM formats,
this patch fixes it so it behaves well from all formats.
Task-number: QTBUG-63163
Change-Id: Id892531d9aaf997b707b430196c1166493792a2a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
Although the window is refused input for the most part from the system,
it does not act like that it is blocked by the application modal dialog.
This ensures that it is the case and prevents things like being able to
double click on the title bar to maximize the window on Windows.
Task-number: QTBUG-49102
Change-Id: If1582819b90cb2ec9d891f664da24f13bfec7103
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
The blacklisting is not needed anymore as we now use -qt-harfbuzz.
This reverts commit b36e5faad4.
Task-number: QTQAINFRA-1363
Change-Id: I3ae50588204b27e6880416ae2cbc28dda53bb292
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
In Qt, we have QTextOption::tabStop, QTextEdit::tabStopWidth and
QPlainTextEdit::tabStopWidth.
Neither are very good names, since the tab stop is neither a
numerical value as in the former, nor does it have any dimensions
that can be measured, as in the latter. Vertical text advances
may also be supported by Qt at some point in the future, at
which point the name would make even less sense.
At the same time, we expose the actual type of the tab stop
distance as floating point in the QTextEdit and QPlainTextEdit
API instead of always rounding it to an int.
To avoid duplicating either of these APIs in Qt Quick, we
introduce tabStopDistance as the common term instead and deprecate
the old names.
[ChangeLog][Text] Introduced tabStopDistance property in
QTextOption, QTextEdit and QPlainTextEdit as replacement for
the inconsistently named tabStop and tabStopWidth properties.
QTextOption::tabStop, QTextEdit::tabStopWidth and
QPlainTextEdit::tabStopWidth have subsequently been deprecated.
Change-Id: Ib7e01387910cddb58adaaaadcd56c0e69edc4bc2
Reviewed-by: Paolo Angelelli <paolo.angelelli@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
I was mistaken before, the "es" part for that version isn't optional, it
*must* be omitted.
Change-Id: I9e83d2317523fb0a905e40b95a56033cf693b93b
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
The test fails when the system harfbuzz (version 1.3.2) is installed.
Change-Id: Id18a5a3c503f64ef56567d71655e433a46908b3f
Task-number: QTQAINFRA-1363
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The test fails when the system harfbuzz (version 1.3.2) is installed.
Change-Id: Id18a5a3c503f64ef56567d71655e433a46908b3f
Task-number: QTQAINFRA-1363
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
- Determine window sizes according to screen size and turn off
scrolling.
- Center the window to get it out of the way of taskbars.
- Make the window top-most.
- Turn off scaling so that coordinates passed to the QWindow
child match device coordinates and the child is positioned
correctly.
- Make the child window a yellow raster window for easier
debugging.
Task-number: QTBUG-45956
Change-Id: I05864770f8ed638d0a36f3e3f2afed73d2952436
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
These tests need fixing, but they are already partially blacklisted
and need investigation once the switch is completed.
Task-number: QTQAINFRA-1292
Task-number: QTQAINFRA-1355
Task-number: QTQAINFRA-1362
Change-Id: Ic50d0c4a01ee7e72be1129d418eff244ba783185
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The image appears to be 128x128. Fixes test failures
FAIL! : tst_QImageReader::readFromResources(rect.svg) Compared values are not the same
Actual (image.size()): QSize(128x128)
Expected (size) : QSize(105x137)
.\tst_qimagereader.cpp(1493) : failure location
FAIL! : tst_QImageReader::readFromResources(rect.svgz) Compared values are not the same
Actual (image.size()): QSize(128x128)
Expected (size) : QSize(105x137)
which likely do not show in the CI since the qtsvg module is not
available when checking only qtbase.
Change-Id: I84ebdde6f2251f56a00f16a54bd20d0c2b23638e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When creating the statements, it is now possible to pass a list of
enabled layer names. Every node or edge which is not in the list of
enabled layers will be pruned from the graph prior to traversal. Note
that an empty layer list for a node or an edge means it is on all
layers.
Change-Id: I61a4df7d395b4beb42ee55ce08fef8ebe04263c9
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
In particular, go through QMetaType/QMetaEnum to deal with enums.
Change-Id: I2e847ba328eb46609b86b3dfd6c4dbf532d78b7d
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
In particular, go through QMetaType/QMetaEnum to deal with enums.
Change-Id: Idbe16c913c1d471a4a91d219f77876e498c192d9
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Passing a null pointer as a parameter to the setChild function no
longer crashes when calling the
QStandardItemModelPrivate::itemChanged signal. The child is removed
from the model.
The patch also fixes the behavior of deleting a item. A
dataChanged signal is emitted.
Change-Id: I027e8b0d84fe33c5fca056df870f0e60a020824b
Reviewed-by: David Faure <david.faure@kdab.com>
In the past, we had an undocumented text flag that worked with
one of the QPainter::drawText() overloads. This was never intended
as public API and served a specific cause in Qt WebKit at one point.
But there is a general need for such API, as disabling shaping features
easily gives 25% performance improvement on text rendering even for
fairly short strings.
This patch adds a new style strategy flag to disable shaping and
will just uses the CMAP and HDMX tables to get glyph indices and advances
for the characters. In Qt 6, the TextBypassShaping flag can be removed
completely and be replaced by the style strategy.
[ChangeLog][QtGui][Text] Added QFont::PreferNoShaping style strategy to support
improvements to performance at the expense of some cosmetic font features.
Task-number: QTBUG-56728
Change-Id: I48e025dcc06afe02824bf5b5011702a7e0036f6d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Fixes flakiness where we enter and exit window states too fast on macOS,
while also removing 2 second waits in the positioning tests that were
slowing things down needlessly.
Change-Id: Ia4ee4d4812474c520fdd3f76b047f4eabe1a8220
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This test verifies processEvents(WaitForMoreEvents)
behavior by first processing all pending events (in
a loop) and then verifying that a following processEvents
call actually waits.
But there is no guarantee that the OS won’t introduce
more events after the first loop has completed. This
does indeed seem to happen on recent versions of macOS.
Change the test to not require that the processEvents
call blocked and de-blacklist.
Task-number: QTBUG-61131
Change-Id: Ic8fa74a6085165442791264f6f137a2fa6083138
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The tests uses QWindow::requestActivate() to verify that a window does
not become active when a modal dialog is running, but on macOS we have
no guards for this, so the test can potentially fail.
In addition, due to a bug in QCocoaEventDispatcher, we end up waiting
5 seconds for that failure to manifest.
Task-number: QTBUG-61965
Task-number: QTBUG-61964
Change-Id: I2f1b62d953e9b6dabf2df0c3023564f27919c498
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Now the parameters from the prototypes are used as default values and
the graph file can overload them.
Change-Id: I9a8a73963c7e578bd0a34e96f76f147a12224f4f
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This will allow to make the prototypes more extensible when referred to
from a graph file while providing some sane defaults.
Change-Id: I1ae10182427d8a7d29c51a64e19e99139494ea92
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This will allow to create nodes having an entry point for tuning, still
need to be exploited by the loaders and the shader generator. Coming in
further commits.
Change-Id: I8384b0f528c9919e9f8d35102adde2b307f08b80
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
We forgot to check that the node content was correct and complete when
loading the graph.
Change-Id: Id4ee6aaba6ca268b0785e7fa3fb51a19817e7c9c
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Changes internal data-size and pointer calculations
to qssize_t.
Adds new sizeInBytes() accessor to read byte size, and
marks the old one deprecated.
Task-number: QTBUG-50912
Change-Id: Idf0c2010542b0ec1c9abef8afd02d6db07f43e6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
