The milli-seconds since epoch value for an invalid transition is,
of course, invalidMSecs(), not invalidSeconds().
Added a comment while I was at it, explaining why we expect a
transition before the epoch, if such transitions are supported.
Change-Id: I0f376f9d69c0e6e79a309dc011943baa41175135
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ultrix and reliant have not seen a release since 1995. dgux not since
2001. bsdi not since 2003. irix not since 2006. osf not since 2010.
dynix... unclear, but no later than 2002. symbian needs no mention.
All considered obsolete, all gone.
sco and unixware are effectively obsolete. Remove them until someone
expresses a real need.
Change-Id: Ia3d9d370016adce9213ae5ad0ef965ef8de2a3ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... by moving them in QTestPrivate namespace (qtesthelpers_p.h). This
header file is a convenient staging area for helper APIs, eventually
some could be moved to public QTest API.
This header file utilizes the same pattern as other qtestlib header
files - wrapping functions with QT_${LIBNAME}_LIB to automatically
enable certain APIs based on what is in the projects dependencies,
e.g. QT += widgets.
Change-Id: Ic0266429939c1f3788912ad8b84fc6e0d5edd68b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Discussed during Qt Contributor Summit 2017. We concluded that we don't
want to make these functions public, as they do not follow Qt coding
style API. Specifically,
qStartsWith(a, b)
is not easily understood which argument is the needle and which argument
is the haystack (same problem memcpy() has). Compare that to
a.startsWith(b)
which can clearly be read in English as a subject-verb-object sentence.
This commit removes the unit tests that called compare().
Discussed-on: http://lists.qt-project.org/pipermail/development/2017-October/031060.html
Change-Id: Icaa86fc7b54d4b368c0efffd14ee6205eb9043fb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Right now,this does really nothing. This commit is just to allow us to
transition the other modules (besides qtbase) to use the syntax that
will become the API.
I've marked three places to use the system CSPRNG:
1) the QHash seed
2) QUuid
3) QAuthenticator
I didn't think the HTTP multipart boundary needed to be
cryptographically safe, so I changed that one to the global generator.
Change-Id: Ib17dde1a1dbb49a7bba8fffd14ecf1938bd8ff61
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Open failures due to sharing violations have been observed in Coin.
Change-Id: If7fbe01a454b3c343c0b87f73db50c28eae901c3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Guard the FILE * obtained by fopen() by a RAI class ensuring
the file is closed on destruction.
Change-Id: I9297f91ca2120238f3a44bad92bca5f920e01aa8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
There were a couple of corner cases where doing setPort() would result
in QUrl thinking that an authority was not present. Since the full URL
parsing implies that a host is always present if the authority is
present, then we also imply that setting the port number makes the host
be present too.
Change-Id: I69f37f9304f24709a823fffd14e67c12da18d69f
Reviewed-by: David Faure <david.faure@kdab.com>
The previous version was good, just not optimal. Because the input was
an unsigned 64-bit number, compilers needed to generate extra code to
deal with HW instructions that only convert 64-bit signed input. And
that was useless because a double uniformly distributed from 0 to 1 can
only have 53 bits of randomness.
The previous implementation did exactly what the Microsoft libstdc++ and
libc++ implementations do. In my opinion, those implementations have an
imperfect distribution, which is corrected in this commit. In those, all
random input bigger than 0x20000000000000 has a different frequency
compared to input below that mark. For example, both 0x20000000000000
and 0x20000000000001 produce the same result (4.8828125e-4).
What's more, for the libc++ and MSVC implementations, input between
0xfffffffffffff001 and 0xffffffffffffffff results in 1.0 (probability 1
in 2⁵³), even though the Standard is very clear that the result should
be strictly less than 1. GCC 7's libstdc++ doesn't have this issue,
whereas the versions before would enter an infinite loop.
Change-Id: Ib17dde1a1dbb49a7bba8fffd14eced3c375dd2ec
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Error out if it's missing or broken (Mersenne Twister not present).
This ensures that we never have a low-quality random generator in Qt.
Change-Id: I0a103569c81b4711a649fffd14ec80649df7087e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Auto-reset events are automatically reset to non-signaled when we get
notified about the signaled state. This implies that we cannot check the
event state again in activateEventNotifiers. Instead, store the signaled
state in a QAtomicInt and test and decrement that.
This amends commit 85403d0a.
Task-number: QTBUG-63555
Change-Id: I0adee3d2929783f98d91060f9106c8b5266d72fa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We're not going to crash to avoid core dumps getting recorded by
systemd, filling up filesystems or showing dialog boxes. We just need to
exit without running destructors. Now, exit() isn't supposed to run
function-scope destructors, so just in case we use _exit().
Change-Id: I0b48fc8e90304e0dacc3fffd14e909ff248ce1a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
<future> is needed by QThread::create. Instead of a fragile series
of preprocessor tests, move its detection to a configure test.
This dramatically simplifies the code, but on the other hand ties
the availability of QThread::create() to the system used to compile
Qt (rather the one used to compile an application).
Change-Id: If1b06363379bf29126cfa68f2a0651cbb78a67f7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commits aba336c2b4 (in Qt 5.2) and
aba336c2b4 (in 5.6) both tried to deal
with this problem, with different levels of success. This is the third
attempt (and hopefully the charm).
Instead of modifying the path that the user provides, go straight ahead
and declare it invalid. This is supported by RFC 3986, which declares
this expansion impossible:
relative-part = "//" authority path-abempty
/ path-absolute
/ path-noscheme
/ path-empty
path-abempty = *( "/" segment )
path-absolute = "/" [ segment-nz *( "/" segment ) ]
path-noscheme = segment-nz-nc *( "/" segment )
The "path-abempty" and "path-noscheme" cases are the two issues we
already handle. This commit adds the third one: path-absolute, which
requires that the first segment of the path be of non-zero length.
That is, it is now possible again to have http://example.com//path
constructed piece-wise, without it producing http://example.com/path.
Additionally, it catches the case of http://example.com//path parsed
from full URL then followed by setAuthority("").
Change-Id: I69f37f9304f24709a823fffd14e67a5e7212ddcd
Reviewed-by: David Faure <david.faure@kdab.com>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When many runnables are executed, this improves the
performance by not resizing the queue for each runnable,
which was the case in the previous version, because of
many calls to QVector::takeFirst().
Also add a test that makes sure tryTake() is safe to
call and does not leave the queue in a bad state that
tries to use nullptr entries.
Change-Id: I608134ecfa9cfc03db4878dcbd6f9c1107e13e90
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Convert QSysInfo/QOperatingSystemVersion to __builtin_available where
required or possible, or to QOperatingSystemVersion where
__builtin_available cannot be used and is not needed (such as negated
conditions, which are not supported by that construct).
Change-Id: I83c0e7e777605b99ff4d24598bfcccf22126fdda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This avoids looping prior to the main 16-byte loop, by performing one
load that may include bytes prior to the start of the string. This is
guaranteed not to fault, since str points to a valid character, but it
may cause Valgrind to print warnings.
Change-Id: I6e9274c1e7444ad48c81fffd14dcae854bba24b2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
"generate" is better than "get", and we already have "generate(it, it)"
which uses std::generate(). This changes:
- get32() → generate()
- get64() → generate64() and QRandomGenerator64::generate()
- getReal() → generateDouble()
Change-Id: I6e1fe42ae4b742a7b811fffd14e5d7bd69abcdb3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
For self-consistency with QSharedPointer and minor consistency
with std::unique_ptr (although QScopedPointer isn't movable, so we
can't claim STL compatibility with it).
[ChangeLog][QtCore][QScopedPointer] Added get().
Change-Id: Ib58f936afa0e0d5bce57a61d1467b69956f37ceb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In data(), index belongs to the proxy, not to the source. It needs
to be mapped back to it first.
Change-Id: Ie5dcbf13166dadf62f3d85b594d3227383132521
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
One example is VxWorks.
Change-Id: I253df715a9417c1f9cede79b1e1860924e0da8a9
Reviewed-by: Tuomas Heimonen <tuomas.heimonen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Performance is more important in this case than the theoretical benefit
of constexpr. This commit implements the SSE2 search for 16-bit null and
it might be possible to implement the equivalent for AArch64
(investigation required). It also adds a fallback to wcslen() for
systems where wchar_t is short (non-x86 Windows or 32-bit x86 build with
-no-sse2).
We can re-add the constexpr loop once the C++ language has a way of
overloading constexpr and non-constexpr. GCC has a non-standard way to
do that with __builtin_constant_p, which is also implemented in this
commit, but note that the inline function is still not constexpr.
Change-Id: I6e9274c1e7444ad48c81fffd14dcaacafda5ebdc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some valid UTF-16 characters cannot be expressed in XML 1.0 and a
QString may contain invalid unicode. In both cases we should not write
the respective data to the output stream, as that generates invalid XML,
which then cannot be read back by QXmlStreamReader. In addition we
should report an error if we encounter them.
The change filters the incorrect strings from the output and introduces
an "encodingError" flag which is reported from hasError().
[ChangeLog][Important Behavior Changes] Characters invalid in XML, such
as 0x0 or 0xfffe, as well as strings containing unmatched UTF-16
surrogates are now suppressed from the output of QXmlStreamWriter and
cause the error flag to be set.
Task-number: QTBUG-63150
Change-Id: Ia29bab768fed9681dd68e8934da2a7e3fcdfc3cd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMacAutoReleasePool is backed by an NSAutoreleasePool, which documents that
"you should always drain an autorelease pool in the same context (invocation
of a method or function, or body of a loop) that it was created".
This means allocating QMacAutoReleasePool on the heap is not a supported
use-case, but unfortunately we can't detect it on construction time.
Instead we detect whether or not the associated NSAutoreleasePool has been
drained, and prevent a double-drain of the pool.
Change-Id: Ifd7380a06152e9e742d2e199476ed3adab326d9c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
[ChangeLog][QtCore][QFileInfo] Relative symbolic links on Windows are
now resolved to their absolute path by symLinkTarget().
Task-number: QTBUG-62802
Change-Id: I5826517130bd389aef994bf3f4b6d99b2a91b409
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Since MSVC doesn't have <chrono> (according to QT_HAS_INCLUDE), the QSKIP
in the test was printed for every line in the table. Instead, add the
skip in the _data() function.
Change-Id: I6e9274c1e7444ad48c81fffd14dbcee5e5a322aa
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
Consider the following:
/root/target - a file
/root/path/link -> ../target
/root/path/other/exe - executable
Running from /root/path/other.
exe is:
#include <QDebug>
#include <QFileInfo>
int main()
{
qDebug() << QFileInfo("../link").symLinkTarget()
return 0;
}
The link references /root/target, but the current output is
/root/path/target.
The link doesn't depend on the PWD. It depends on its own directory.
Change-Id: I61e95018154a75e0e0d795ee801068e18870a5df
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That means a file is never created, unless you ask for the name. There's
no chance of left-over temporary files being left behind. QSaveFile also
benefits from this, since the save file is not present on disk until
commit(). Unfortunately, QSaveFile must go through a temporary name
because linkat(2) cannot overwrite -- we need rename(2) for that (for
now).
[ChangeLog][Important Behavior Changes][QTemporaryFile] On Linux,
QTemporaryFile will attempt to create unnamed temporary files. If that
succeeds, open() will return true but exists() will be false. If you
call fileName() or any function that calls it, QTemporaryFile will give
the file a name, so most applications will not see a difference.
Change-Id: I1eba2b016de74620bfc8fffd14cc843e5b0919d0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This test sets up two timers:
- a 100ms recurring timer
- a series of 10 200ms single-shot timers.
After quitLock lets exec() return it then uses a signal
spy to check if the 100ms timer fired at least 17/20
of the times it should.
However there is no guarantee that the 100ms timer
will fire more often than the 200ms timer. If the
native timer callbacks happen at 500ms intervals then
Qt will fire both timers (once) at that interval.
In practice this seems to happen on macOS CI under
system load and/or with the test app napping.
The primary goal for the test is to verify that exec()
returns when it should; we can remove the timer signal
spy.
Remove testQuitLock from BLACKLIST.
Timely timer:
524429311.389913 runLoopTimerCallback
524429311.389979 200ms fire
524429311.389997 100ms fire
524429311.490056 runLoopTimerCallback
524429311.490130 100ms fire
524429311.589752 runLoopTimerCallback
524429311.589929 200ms fire
524429311.589976 100ms fire
Delayed timer:
524429428.690887 runLoopTimerCallback
524429428.691002 100ms fire
524429428.691143 200ms fire
524429433.692103 runLoopTimerCallback
524429433.692205 100ms fire
524429433.692331 200ms fire
Change-Id: Iff4faaa1de3741cf4e217949d5ed17d4e70c6af2
Task-number: QTBUG-61499
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
On BSD systems (tested on macOS and FreeBSD), you *can* lseek(2) or
ftell(3) on a pipe and get its current position. But QFile will not get
the position when the file is sequential, so we need to return 0.
Technically speaking, we ought to do the same for block devices, but if
you're redirecting stdin, stdout or stderr in the unit test to or from a
block device, you deserve the extra work to add that yourself to the
test.
Change-Id: I3868166e5efc45538544fffd14d8a74e92963fe7
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
If a QFileInfo was constructed with an empty path, which could happen
with QFileInfo(QFile()) or via QDir, etc., then it would issue system
calls to empty paths and could even produce warnings. This commit makes
am empty path name be the same as a default-constructed QFileInfo and
corrects the use if 0 for ownerId and groupId to match the
documentation.
[ChangeLog][Important Behavior Changes] QFileInfo on empty strings now
behaves like the default-constructed QFileInfo. Notably, path() will now
be the empty string too, instead of ".", which means absoluteFilePath()
is no longer the current working directory.
Change-Id: I8d96dea9955d4c749b99fffd14ce34968b1d9bbf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
The Unix stat fields "st_ctime" and "st_ctim" mean "change time", the
last time that the file/inode status fields were changed. It does not
mean "creation time". So this commit splits all of the internal API to
"birth" and "metadata change" instead of "creation" to avoid the
conflict.
Change-Id: I149e0540c00745fe8119fffd1463fe78b619649e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
[ChangeLog][QtCore][QFileInfo] Deprecated created() because it could
return one of three different file times depending on the OS and
filesystem type, without the ability to determine which one is which. It
is replaced by metadataChangeTime() and birthTime().
[ChangeLog][QtCore][QFileInfo] Added QFileInfo::metadataChangeTime(),
which returns the time the file's metadata was last changed, if it is
known, and falling back to the same value as lastModified() otherwise.
On Unix systems, this corresponds to the file's ctime.
[ChangeLog][QtCore][QFileInfo] Added QFileInfo::birthTime(), which
returns the file's birth time if it is known, an invalid QDateTime
otherwise. This function is supported on Windows and on some Unix
systems.
Change-Id: I0031aa609e714ae983c3fffd1467bd8b3e3a593d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is required so that one can use QSettings in situations that
temporary files or renaming may not work.
[ChangeLog][QtCore][QSettings] Added setAtomicSyncRequired(), which
allows one to use QSettings with config files in unwriteable directories
or in Alternate Data Streams on NTFS on Windows. This used to work
before Qt 5.4, but remains a non-default behavior due to the potential
of data corruption.
Task-number: QTBUG-47379
Change-Id: I81480fdb578d4d43b3fcfffd14d4f77112f0402f
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
We can't use MoveFile to do atomic commits on an ADS, so QSaveFile needs
to detect when the target name is ADS and then use the direct fallback
mode.
[ChangeLog][QtCore][QSaveFile] Saving to Alternate Data Streams on NTFS
on Windows is now possible, but requires setDirectWriteFallback(true).
Task-number: QTBUG-47379
Change-Id: I81480fdb578d4d43b3fcfffd14d4bc062ae1750d
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
So we can use it in QTemporaryFile, QTemporaryDir and QFile::rename()
[ChangeLog][QtCore][QTemporaryDir] The class now supports the "XXXXXX"
replacement token anywhere in the template, not just at the end. This
behavior is similar to what QTemporaryFile supports.
Change-Id: I1eba2b016de74620bfc8fffd14ccb645729de170
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
A nullptr QVariant should become a null QString or QByteArray,
since null strings have previous in our APIs represented the null value
in the absence of a dedicated null metatype.
Change-Id: I3b8f6386ece314d7c196959fbcf042c4fe0508a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Actually check that there's a T where ISO 8601 wants it (instead of
just skipping over whatever's there), with something after it; move
some declarations later; add some comments; and use the QStringRef API
more cleanly (so that it's easier to see what's going on). Simplify a
loop condition to avoid the need for a post-loop fix-up.
This incidentally prevents an assertion failure (which brought the
mess to my attention) parsing a short string as an ISO date-time; if
there's a T with nothing after it, we won't try to read at index -1 in
the following text. (The actual fail seen had a Z where the T should
have been, with nothing after it.)
Add tests for invalid ISOdate cases that triggered the assertion.
Change-Id: Ided9adf62a56d98f144bdf91b40f918e22bd82cd
Reviewed-by: Israel Lins Albuquerque <israelins85@yahoo.com.br>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Changes the QVariant::isNull() implementation for
pointer types so they return true if null.
[ChangeLog][QVariant] QVariants containing pointers will now return
true on isNull() if the contained pointer is null.
Change-Id: I8aa0dab482403837073fb2f376a46126cc3bc6b2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore] Added qEnvironmentVariable, which returns the value
of an environment variable in a QString, while qgetenv continues to be
used to return it in a QByteArray. For Unix, since most environment
variables seem to contain path names, qEnvironmentVariable will do the
same as QFile::decodeName, which means NFC/NFD conversion on Apple OSes.
I opted not to #include <qfile.h> from qglobal.cpp to implement that
QFile::decodeName functionality, so qglobal.cpp doesn't depend on
corelib/io and to avoid possible recursions.
Task-number: QTBUG-41006
Change-Id: I14839ba5678944c2864bffff141794b8aaa7aa28
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
don't try to execute a binary from the install dir.
amends 8e776d39f.
Change-Id: I37990bc83b295379f0c93f4ca712e1bbf980fd44
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Allows setting the stack size for the thread pool
worker threads. Implemented using QThread::stackSize.
Task-number: QTBUG-2568
Change-Id: Ic7f3981289290685195bbaee977a23e0c3c49bf0
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Update documentation to be clearer on the special null variant state
with no value as opposed to a variant with a null value, and only block
conversions of the former.
Change-Id: I24fd50285414e049de87de54a63700a89bd5adf1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check we do handle DST after epoch and don't before.
Check we do notice various unusual transitions.
Check we do handle non-whole-hour-offset zones.
(Unfortunately, MS-Win lacks data for some of the zones and is wrong
about the two date-line crossers, so we skip those for it.)
Change-Id: If420d61b9db7f914ca25c22297c16e917ad2307a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWinEventNotifiers were limited to 62 instances, because of
WaitForMultipleObject's limitation to MAXIMUM_WAIT_OBJECTS - 1 handles.
Use the RegisterWaitForSingleObject API which does not have this
restriction and executes waits in threads managed by the system. A
central manual reset event per event dispatcher is signaled in the
RegisterWaitForSingleObject callback and waited for in the event loop.
Task-number: QTBUG-8819
Change-Id: I3061811c18e669becf9de603bbdd7ba96e4d2fcd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Split the test in two: one test that requires the symlinks
and test files and one that does not need them.
In the test with test files, verify each step and the deletion
of the files.
Task-number: QTBUG-58654
Task-number: QTBUG-50835
Change-Id: I14de57ce7a1df2d834d5a7565c804dead1d89088
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This needs a zone with transitions near the epoch; and the only CET
with DST that winter was Italy (copied by Malta), for which the Olson
database had a recent (2016) correction to its data, for that winter.
That means we get inconsistent results on O/Sen of different ages.
So add a separate testEpochTranPrivate(), alongside testCetPrivate(),
and test it with America/Toronto. (Unfortunately, MS-Win gets the
date wrong on the first transition after the epoch, so we have to code
round that.)
Since information before the epoch isn't reliably available, only test
the search backwards if nextTransition does find something before it.
(We can safely assume all real transitions happened since 1601;
non-celestial time-keeping wasn't accurate enough, before that, for
anyone to synchronize with anything but celestial time.)
Change-Id: I984b46938a2805b93bb2afd6855e317b5d66b386
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Found while working on suppressing the warning about the return value
(which is either 0 or -1) was being ignored.
Task-number: QTBUG-61968
Change-Id: I02d22222fff64d4dbda4fffd14d148b1724547ca
Reviewed-by: Florian Bruhin <qt-project.org@the-compiler.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 346cd79192. The bug
report was incorrect, since the suggested file name is actually valid,
it just happens to name an Alternate Data Stream (ADS) "20:803Z.txt" in
file "testLog-03".
[ChangeLog][QtCore][QFile] Reverted an incorrect change from Qt 5.9.0
that forbade the creation and access to Alternate Data Streams on NTFS
on Windows. This means that file names containing a colon (':') are
allowed again, but note that they are not regular files.
Task-number: QTBUG-57023
Change-Id: I81480fdb578d4d43b3fcfffd14d4f2147e8a0ade
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Currently QLocale::c().bcp47Name() returns "C" which, according to [BCP47], is
not a valid language tag. In particular it does not conform to the ABNF grammar
in section 2.1 which specifies a minimum length of 2 characters for all language
tags.
[BCP47]: https://tools.ietf.org/html/bcp47
This patch changes the return value to "en" seeing as the documentation for
QLocale::Language states that the C language is identical in behavior to
English.
Task-number: QTBUG-61949
Change-Id: I2a381def8fb7156467e01d105da92bb1f4821204
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When QCOMPARE(,) reports two 12-digit numbers, it's not always
immediately obvious what the difference is (much less what 1/3600000
of it is); nor is it obvious that (or why) a given 12-digit number is
in fact correct. In contrast, our eyes can make sense of a
QDateTime's reported value quite well, enabling us to see what's
different; and it's possible to at least confirm the plausibility of
2-or-3 am on a spring or autumn day at a plausible transition (or even
to confirm it exactly by consulting suitable web-sites). Also
document the actual transition happening in each case (since I *did*
consult a suitable web-site). So prefer to QCOMPARE(,) two QDateTime
values instead of two 12-digit qint64s.
Where a that would be unsuitable, at least compare the difference to
zero, to make the error easier to understand (except when one of the
twelve-digit numbers consists entirely of 9s; that, for once, actually
is easy to see).
Write various multiples of 3600 as the relevant intelligible whole
number times 3600, rather than premultiplying, to make it obvious to
reders what's going on.
None of this changes what is actually tested.
Change-Id: I488e751283a55d4623c93612af13ad631144900d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A loop initialized i = 0 and used i > 2 as its condition; it didn't
get very far. Consequently, the test it was in never checked whether
CET's 2011 transitions happened at the times expected - which they
didn't, as the times in question were in fact the times at which
Pacific/Auckland had its transitions that year.
Change-Id: I94d1f8df615c5bcfe48e73d41b4c7faf2beccb96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make QVariant::toJsonValue do conversions as well as
QJsonValue::fromVariant.
Change-Id: I175d43677061470691e2e0104a800be355fbbd3d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is the result of running the (experimental) clang-tidy check
qt-modernize-qsharedpointer-create
Discarded changes:
- tst_qsharedpointer.cpp: not sure we want these replacements there
(→ separate change)
- tst_collations.cpp: hit in a template specialization that is
instantiated with both QSharedPointer and QSharedDataPointer.
Change-Id: I203c2646e91d026735d923473af3d151d19e3820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test verifies processEvents(WaitForMoreEvents)
behavior by first processing all pending events (in
a loop) and then verifying that a following processEvents
call actually waits.
But there is no guarantee that the OS won’t introduce
more events after the first loop has completed. This
does indeed seem to happen on recent versions of macOS.
Change the test to not require that the processEvents
call blocked and de-blacklist.
Task-number: QTBUG-61131
Change-Id: Ic8fa74a6085165442791264f6f137a2fa6083138
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QVariant claims to be able to QVariantHash and QVariantMap, but the
actual conversion implementation is missing.
Task-number: QTBUG-61471
Change-Id: I0cba74642aa77dc423effed289bc7619922a89eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that QFileDevice::setFileTime() provides a portable way to prepare
our test file, we can verify QFileInfo does handle the distant past,
notably including negative time_t values. The old MS-specific code
used a time back in 1601, which we can't hope to support
cross-platform, so use one in 1901 that's a little inside the range of
32-bit time_t.
Task-number: QTBUG-47985
Change-Id: I2de3e79d8c7864221f92395813b63f373e4d8a3b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The output didn't previously make clear that the datum was invalid.
It's now explicitly invalid. At the same time, use QDebug's space()
and nospace() methods to make spacing choices explicit.
Revised a QDate test to match.
Change-Id: I4699f5897530b4caa31c22fdb07de149832b30f4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Separate the part varying between tests from the common form of all
the tests, so the reader can see the common pattern and know for sure
that there's not a typo or copy-and-paste glitch.
Change-Id: I3145a26ab42c104eb27756d906ac87f937024bad
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QLocale] Fixed the conversion of QTime to string
form and parsing from string form to always treat the value as the
decimal fraction of the seconds component. That is, the string format
".z" produces/parses ".2" for 200 milliseconds and ".002" for 2
milliseconds. Use of "z" or "zzz" is discouraged outside decimal
fractions to avoid surprises.
Task-number: QTBUG-53565
Change-Id: Ia19de85ad35e4eb7bb95fffd14792caf9b4a5156
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QWindowsFileSystemWatcherEngine uses one change notification
per directory to watch directories or files within that
directory. Adding files and their directories in a sequence
caused the value in QWindowsFileSystemWatcherEngineThread::HandleForDirHash
to be overwritten.
Relax the check for the flags (watcher attributes) to use >= and recreate
the change notification of a directory should its flags be insufficient.
This triggers when a file is added after its directory since files
require more attributes.
Task-number: QTBUG-61792
Change-Id: I371a72f1934fa82c53aaf84beb907825031f1c81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixed crash on QCoreApplication::translate() call from qqmlThread while
QCoreApplication::{install,remove}Translator() is called from the GUI
thread.
[ChangeLog][QtCore][QCoreApplication] Calling
QCoreApplication::translate() is now thread-safe.
Task-number: QTBUG-57095
Change-Id: Ie5340a42040a829f311c01332e05d4bbaf60462c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since the result is an actual zero, this section of code looking for
underflows kicks in. But we forgot to take the capital letter into
account when parsing the number.
Task-number: QTBUG-61350
Change-Id: Ia53158e207a94bf49489fffd14c6abbd21f0bac0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
tst_QLocale::macDefaultLocale() was determining local-time's current
offset from UTC and using it when working out what to expect the
offset at 1:2:3 today to be. When a transition happens after 1:2:3 on
its day (which is usual for DST changes in Europe), this lead to using
the new offset to test a time before the transition; the test was thus
wrong and failed.
Use the time to be tested (and current date) to compute the offset to
use, instead of using the current date-time.
Change-Id: I1c02a5579bca859e1d1aeb4f45b24871a08287af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qemu uses some memory for each generated thread. This test creates
> 80000 threads and consumes about 10Gb of memory which is too
heavy for a VM.
Task-number: QTBUG-59966
Change-Id: I1bb8a0d7955778f5201948b41befcb9f1f391514
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The getentropy function, first found in OpenBSD, is present in glibc
since version 2.25 and Bionic since Android 6.0 and NDK r11. It uses the
Linux 3.17 getrandom system call. Unlike glibc's getrandom() wrapper,
the glibc implementation of getentropy() function is not a POSIX thread
cancellation point, so we prefer to use that even though we have to
break the reading into 256-byte blocks.
The big advantage is that these functions work even in the absence of a
/dev/urandom device node, in addition to a few cycles shaved off by not
having to open a file descriptor and close it at exit. What's more, the
glibc implementation blocks until entropy is available on early boot, so
we don't have to worry about a failure mode. The Bionic implementation
will fall back by itself to /dev/urandom and, failing that, gathering
entropy from elsewhere in the system in a way it cannot fail either.
uClibc has a wrapper to getrandom(2) but no getentropy(3). MUSL has
neither.
Change-Id: Ia53158e207a94bf49489fffd14c8cee1b968a619
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
tst_qvariant.cpp(80): warning C4309: 'initializing': truncation of constant value
tst_qvariant.cpp(4635): warning C4309: 'initializing': truncation of constant value
tst_qbytearray.cpp(1438): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
tst_qbytearray.cpp(1440): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
http2srv.cpp(64): warning C4018: '<=': signed/unsigned mismatch
tst_qinputdialog.cpp(352): warning C4804: '<=': unsafe use of type 'bool' in operation
Change-Id: Id012d88b7b20c5c9f128f2ef53753cc1d479f358
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It breaks sth in QLocalSocket which is used in QtRemoteObject.
This reverts commit 5c6210e345.
Task-number: QTBUG-61668
Change-Id: Ib11890923773496e5d998b7709ef93b0a839a759
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Follow the pattern used to guard Private::sort() calls elsewhere in the
class.
Because QAbstractItemModel::sort() is not called in the unit test, the
content is not sorted after resetting.
[ChangeLog][QtCore][QSortFilterProxyModel] QSortFilterProxyModel
now does not emit an unnecessary layoutChanged() following a model
reset.
Change-Id: I0a36c7fbb172bdd06ecddb489c5595debbef6cb9
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Makes the qle_bitfield template more generic and moves it to qendian_p.h
It is also hardened to be more reliable.
Change-Id: I53214ec99cceee4f5e8934ae688c99e555a5fb42
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Avoid the dimensions of the rounded QRect being off by more than one
pixel. This ensures the aligned containing rect also contains the
rounded rect.
Task-number: QTBUG-56420
Change-Id: Ib79110e51ab80de2dc83d01ea83fc5fbf3852e75
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWinEventNotifiers were limited to 62 instances, because of
WaitForMultipleObject's limitation to MAXIMUM_WAIT_OBJECTS - 1 handles.
Use the RegisterWaitForSingleObject API which does not have this
restriction and executes waits in threads managed by the system. A
central manual reset event per event dispatcher is signaled in the
RegisterWaitForSingleObject callback and waited for in the event loop.
[ChangeLog][QtCore][QWinEventNotifier] QWinEventNotifier is not
restricted to 62 instances anymore.
Task-number: QTBUG-8819
Change-Id: I2c749951453a4b699cc50dada0d6017440b67a4a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
GCC didn't support it until version 5 or 6, so add configure tests for
both <random> and <sys/auxv.h>. Normally I'd say "upgrade", but this is
too low-level and important a feature.
There's a good chance that all our supported compilers have <random>
anyway. As for <sys/auxv.h>, it's present on Glibc, Bionic and MUSL, but
I don't see it in uClibc (AT_RANDOM is a Linux-specific feature).
Change-Id: Ia3e896da908f42939148fffd14c5b2af491f7a77
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The serialization of date-times understood time-zones (indicated by a
't' in a format string) but the parsing didn't (so viewed the 't' as a
literal element in the format string, not matched by the actual zone
it needs to parse), although some tests expected it to.
This made round-trip testing fail.
Implemented parsing of time-zones.
Re-enabled the formerly failing tests.
[ChangeLog][QtCore][QDateTime] Added support for parsing of time-zones.
Task-number: QTBUG-22833
Change-Id: Iddba7dca14cf9399587078d4cea19f9b95a65cf7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use M_PI (and friends), where possible, in favor of hand-coded
approximations of various (in)accuracies. Where that's not available
(e.g. fragment shaders), use the same value that qmath.h uses for
M_PI, for consistency. Replaced math.h with qmath.h in places that
defined a fall-back in case math.h omits it (it's not in the C++
standard, although M_PI is in POSIX); or removed this entirely where
it wasn't used.
Reworked some code to reduce the amount of arithmetic needed, in the
process; e.g. pulling common factors out of loops. Revised an
example's doc to not waste time talking about using a six-sig-fig
value for pi (which we no longer do) - it really wasn't relevant, or
anything to be proud of; nor did the doc mention its later use.
Task-number: QTBUG-58083
Change-Id: I5a31e3a2b6a823b97a43209bed61a37b9aa6c05f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The formatting of times in Norwegian has changed to use colon rather
than dot between hours, minutes and seconds:
http://cldr.unicode.org/index/downloads/cldr-30#TOC-Other
tst_QLocale gets a matching revision.
Change-Id: I35a16080def5fbadd62144a0b44be8110b9be29b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
It should be easier to translate sizes in bytes to human-readable
strings consistently rather than having to repeat this code (and the
string translations) in various places. The FileDialog in QtQuick.Controls
has a use for this, too.
[ChangeLog][QtCore][QLocale] Added QLocale::formattedDataSize() for
formatting quantities of bytes as kB, MB, GB etc.
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: I27bca146c3eba90fa7a5d52ef6626ce85723e3f0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is flaky on macOS 10.12.
Task-number: QTBUG-61500
Change-Id: I3dfb6979808dec3a20896c2579dd1f5124c94a70
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Randomly timeouts in the CI.
Task-number: QTBUG-59679
Change-Id: I28410b747b2033fc0ef6286a11c88cd0c07eb247
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
As the files are packaged into the binary, they have to be
extracted, before they can be ::open'ed.
Change-Id: Ie83086a2b9a73b6b0de462bdb52a71bb277ae06f
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
[ChangeLog][QtCore][QProcess] Added support for standard channel
redirection using setStandard{Input|Output|Error}File to
QProcess::startDetached.
Task-number: QTBUG-2058
Task-number: QTBUG-37656
Change-Id: Iafb9bd7899f752d0305e3410ad4dcb7ef598dc79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The motivation for this change is to make it simple to pass a
correctly sorted environment block to Win32 CreateProcess(). It is
also nice in other contexts that the environment variables are
sorted. The change is made for all platforms. This keeps it simple and
the only ill effect is slightly slower lookups.
Concerning the environment block passed to Win32 CreateProcess:
The environment block that is passed to CreateProcess() must be sorted
case-insensitively and without regard to locale. See
https://msdn.microsoft.com/en-us/library/windows/desktop/ms682009(v=vs.85).aspx
The need for sorting the environment block is also mentioned in the
CreateProcess() documentation, but with less details:
https://msdn.microsoft.com/en-us/library/windows/desktop/ms682425(v=vs.85).aspx
Task-number: QTBUG-61315
Change-Id: Ie1edd443301de79cf5f699d45beab01b7c0f9de3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When punctuation is ignored then the kUCCollatePunctionSignificantMask
should not be set. This was originally thought to not be working due to
a bug on the Apple platforms, but this is not the case.
[ChangeLog][Platform Specific Changes][macOS][iOS] QCollator now
respects the ignorePunctuation property on Apple based platforms
correctly.
Task-number: QTBUG-41978
Change-Id: I62044076387d6e4479f4aaef3c2f48f49dbd160e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
First and most importantly, let's not use more than half of the template
for the application's PID. With over 71% of all PIDs on a typical Linux
system and 90% of those on a Darwin system having 5 decimal digits,
using them all in a template that is usually 6 characters long is
wasteful. That leaves only 1 character for the random part, thereby
reducing the number of temporary files possible to only 52. So limit the
PID to half the characters of the template.
Second, let's use QRandomGenerator::bounded to create the the random
part, instead of qrand (which is often unseeded at this point).
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b52eda5e467395
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This class provides a reasonably-secure random number generator that
does not need seeding. That is quite unlike qrand(), which requires a
seed and is low-quality (definitely not secure).
This class is also like std::random_device, but better. It provides an
operator() like std::random_device, but unlike that, it also provides a
way to fill a buffer with random data, not just one 32-bit quantity.
It's also stateless.
Finally, it also implements std::seed_seq-like generate(). It obeys the
standard requirement of the range (32-bit) but not that of the algorithm
(if you wanted that, you'd use std::seed_seq itself). Instead,
generate() fills with pure random data.
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b4e3ba9ea04da8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Makes it easier to pull out data from a document when the structure is
known up front, while still supporting default values if the structure
does not match the expectation, eg:
int age = QJsonDocument::fromJson(ba)["users"][0]["age"].toInt(-1);
Change-Id: Ief0899bbb81610f6f22a56e2ac846121bffe77a0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Saves a lot of manual toArray() and toObject() calls when the
JSON structure is usually known anyways. Read only access for now.
Change-Id: I5fd787144198e0443e4da285a11ce2597b66f99f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QTimeZone("UTC") should be valid, as "UTC" appears in the list of
availableTimeZoneIds(), and tst_QTimeZone::dataStreamTest() constructs
timezones like this, which are considered valid.
The internal representation of a QTimeZone("UTC") as created by
QTimeZone::QTimeZone(const QByteArray &ianaId) is a QUtcTimeZonePrivate
which isValid(), so the containing QTimeZone isValid() too.
When QTimeZone is serialized into a QDataStream, it calls
tz.d->serialize(ds) which is QUtcTimeZonePrivate::serialize. This
writes QStringLiteral("OffsetFromUtc") followed by the IANA ID and
the offset (etc.) to the datastream.
When QTimeZone is deserialized it looks for this marker string, and if
present, it passed all of the parameters to the QTimeZone constructor
(not just the name). However, that constructor does not support standard
IANA timezones (only custom ones), and when it detects that the supplied
IANA ID is actually listed in availableTimeZoneIds(), it leaves the
pointer to the QTimeZonePrivate uninitialized (NULL), which leaves
the QTimeZone invalid (isValid() returns false).
Thus, a valid timezone which was serialized and then deserialized has
become invalid. This also affects serialization of QDateTimes with
timezones.
Fixed by calling the name-only constructor first, which works (only) for
IANA standard timezones and leaves the QTimeZone invalid (isValid()
returns false) otherwise. In which case, we can call the many-argument
contructor to create a custom timezone with the same offset as the one
which was originally serialized.
[ChangeLog][QtCore][QTimeZone] Fixed sending IANA standard UTC-offset
QTimeZones through QDataStream, which previously came out invalid after
deserialization.
Task-number: QTBUG-60595
Change-Id: Id9c47e8bda701faae4d800e012afb6db545b2fe9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It is possible that tmpdir already exists as a leftover from previous
tests. That is no reason for the test to fail.
Change-Id: I010633fb92defb064093af9872ae6fd2178f07dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
load(resources) makes embedding the test data into the executable
fail for platforms that use builtin test data. As the load call
is only used to obtain QMAKE_RCC we can avoid that call by
assuming that rcc was not renamed and assembling the path ourself.
Change-Id: I25b982d10f5617d9a213803e7e4bcc85fc66b2e7
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The binary hangs rather than segfaults on that platform.
Task-number: QTBUG-59936
Change-Id: Id7d38edb7c746e3c0cd4b4941e0e19b3d42a628a
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This class in unused in qtbase since Qt 5.6.1.
The only outside usage was in qtserialport, which got its own copy of
QWinOverlappedIoNotifier in commit qtserialport/65dba188.
Change-Id: I7668e67a1cc49c4418c66141784b180cd5f9d479
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The documentation says that it's equivalent to
qgetenv(varName).toInt()
But the implementation wasn't. QByteArray::toInt() verifies that the
entire string was consumed, so QByteArray("1a").toInt() == 0, but
qstrtoll alone doesn't. That is, qstrtoll("1a", ...) == 1.
The implementation also detected the base, a behavior I kept. Instead, I
updated the documentation.
Change-Id: I0031aa609e714ae983c3fffd14676ea6061a9268
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This method now returns -1 by default, due to commit 6255cb893d
which mistakenly replaced -1 with Qt::IgnoreAction (0x0).
As a result, dropping is forbidden in a number of applications
(I detected this in zanshin).
Change-Id: I4922451216e08d5d3fe36f8ba87364a361b691bf
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
tryAcquireWithTimeout(0.2s) was already blacklisted and
now the same failed with "(2s)".
Task-number: QTBUG-58745
Change-Id: I82363238c08056d2969a7616e3a6e5af080d537d
Reviewed-by: Liang Qi <liang.qi@qt.io>
tst_QSharedPointer can't create a pipe as the OS has too many files
open. Systems like macOS have a lower limit to these simultaneous files
open.
Task-number: QTBUG-60410
Change-Id: I21e89f992ada2a7d09b706522a05b5952f00ec33
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
They have been blacklisted on windows previously and now fail on
macOS 10.12 as well.
Task-number: QTBUG-60993
Change-Id: Ib7a3acfc7f2285c0a587d4abd88a4a218391d623
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Limitation is that the signal needs to be parameter-less
[ChangeLog][moc] moc now supports NOTIFY signals of parent classes in Q_PROPERTY
Change-Id: Iad64c96c3ec65d4be8ad9ff1a9f889938ab9bf45
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Brett Stottlemyer <bstottle@ford.com>
The test has been observed to be flaky on Windows. Introduce
QTRY_VERIFY_WITH_TIMEOUT for diagnostics.
Change-Id: I72abdd2e5544f8f35199876486ab15151f60e5f2
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
... using the same qt_trimmed(), qTrimmed(), Q..::trimmed() split we've
been using for all other out-of-line string-view member functions to
avoid forcing string-view objects onto the stack for the passing of 'this'.
In the test, had to fix nullness not being propagated from a QByteArray
to the QLatin1String constructed from it. Probably worth fixing in
QLatin1String(QByteArray), too.
[ChangeLog][QtCore] Added qTrimmed() free functions.
[ChangeLog][QtCore][QLatin1String] Added trimmed() function.
Change-Id: I73c18ef87e203f30f7552c10dd5c84223bcfae0e
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This is often more natural than (ptr, len), and I need it in the
implementation of QStringView::trimmed().
Change-Id: I1d99b5ddaf76eee0582150b0233ef6ce9c37d25d
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
On winrt, the default application version is determined by its
manifest file. The template's default version is 1.0.0.0.
Additionally addRemoveLibPaths should not fail if libraryPaths
only contains currentDir.
Change-Id: Ifdd517f1bfe2fdf641f3d728ebe1fa144df1a8ca
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Found by GCC 7.
Change-Id: I90267617a038558e5b5213c598a949baf8d4d9be
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This commit fixes two bugs:
1) Two ranges should not be merged if they are of different columns.
The old code would have merged (0,0) with (1, 1). Tranforming a selection
of just two indexes in a rectangle of four indexes.
2) The QItemSelectionRange appended had wrong column and worked only for
indexes of the first column. For example if 'tl' was (0, 1) than br was (0, 1)
so the QItemSelectionRange would have be ((0,1), (0, 1-1)) so ((0,1), (0,0)).
This QItemSelectionRange is invalid because topLeft columns is greater than
bottomRight column. The fix take in consideration the bottomRight column.
Task-number: QTBUG-58871
Change-Id: I591ef0bcc63926f24a7b1ced002af9b7737a4b6e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
... and update the unittest accordingly.
Compared to the 1.8 release there is one change in freedesktop.org.xml,
the magic for application/x-java-keystore was changed from host32 to
big32, as done upstream, see https://bugs.freedesktop.org/show_bug.cgi?id=99328
Task-number: QTBUG-60608
Change-Id: I47de71c9396cfc3eabc884d5679c73a3e4850a17
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The conditions checked are compile-time conditions anyhow.
Simplify or strenghten a few conditions while at it.
Change-Id: If07f2aedca4c3632d852a8fdb2b3f7eb55a96c93
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Backtrace logging tests were not passing for arm when -O2 option was used.
Set "-fno-inline" on for the app whose backtrace is to be inspected.
Task-number: QTBUG-59966
Change-Id: Id1bbf78c31dc524357a30c7d39c239689621b155
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The QMimeType class can be quite useful to graphical QML applications,
especially on the desktop.
[ChangeLog][QtCore][QMimeType] Add Q_GADGET, so that QML applications
can make use of QMimeType's properties and methods.
Change-Id: I03e6e82062558a72f5b97e65bbddfc4b7470e735
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Jeremy Katz <jeremy@panix.com>
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The operator double() and operator long double() members of qfloat16
are causing cast ambiguities. This removes them, leaving only
operator float() which seems to be adequate.
Also, additional arithmetic operator tests were added which without
this removal fail to compile.
Change-Id: Id52a101b318fd754969b3de13c1e528d0aac2387
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch implements an iterator that returns a pair containing both the
key and the value of an entry in QHash/QMap.
[ChangeLog][QtCore][Containers] Added an stl-like iterator to go through
QHash/QMap returning both the key and the value of the element pointed to.
That lets QHash/QMap interoperate better with stl's algorithms like
std::set_union.
Change-Id: Idbf8a8581510b3493648c34ab04c556de9fa4aa7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The existing QHash::operator== does not work when the same
keys appear in different order between the two hashes being compared.
However, relying on iteration order on a QHash is (as usual) a bad
idea and one should never do it.
Task-number: QTBUG-60395
Change-Id: Ifb39a6779230e26bbd6fdba82ccc0247b9cdc6ed
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
All good (now).
Change-Id: I666773856a239826e646398a943e7df30bd81671
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For transformations, regardless of whether they're currently
overloaded on rvalue-this or not, check the results of calls to const
lvalues as well as mutable rvalues.
Use the new mixed-type QCOMPARE more.
Change-Id: Ibaa436cd88b40e5c0823c3bbe5b04a9964e7e987
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There were still two cases where spurious notifications would be
possible:
- user calls hasPendingDatagrams()/pendingDatagramSize() on UDP
socket somewhere outside the slot connected to readyRead()
signal (::WSARecvFrom posts FD_READ notification, even if
a notification for incoming datagram already exists in the
message queue);
- a socket was registered to receive several types of event and
WM_QT_ACTIVATENOTIFIERS message is located between the
different events for this socket in the queue.
Provided patch ensures that the message queue is synchronized with
the Qt event processing mechanism and adds a way to detect spurious
notifications inside the window procedure.
Task-number: QTBUG-58214
Change-Id: I49609dace601f300de09875ff1653617efabd72f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
This allows the use of move-only function objects
Task-number: QTBUG-60339
Change-Id: If3595fca338cf7f3039eb566cc02e4e73cd04c86
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I don't know why.
tst_qflags.cpp(114): error: no instance of function template "verifyConstExpr" matches the argument list argument types are: (Qt::MouseButton)
tst_qflags.cpp(91): note: this candidate was rejected because there is a type mismatch after argument substitution
Change-Id: I84e363d735b443cb9beefffd14b9581d77933cb8
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The QString API symmetry test strikes again, showing that this is
inconsistent with both QString and QByteArray, which both return empty
for empty inputs.
The fix actually makes the implementation simpler.
Extend the QStringRef test to cover null inputs, too. I can't merge
the trimmed() test in the API symmetry test until everything is
actually consistent.
[ChangeLog][QtCore][QStringRef] trimmed() now returns an empty
string-ref for an empty input. Before, it would return a null one.
Change-Id: I6b35c5f498053c4e15a4a9dd465bc696258e7393
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Less code duplication, since truncate() is the action version of
left().
This is done in preparation of adding more actions for the string
transformations we have.
Change-Id: I55027b5143ad3349d46091ac1cc3d24a9707caee
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
That's the only value for which we will guarantee a stable result across
Qt versions and across invocations of the same application on different
architectures is zero. For any other value, we reserve the right to
change the algorithm. We'll now print a warning when we detect that.
Task-number: QTBUG-47566
Change-Id: I27b55fdf514247549455fffd14b1135e10d24ab4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
All good.
Can't check QByteArray::startsWith(), as it is lacking the
Qt::CaseSensitivity parameter.
Change-Id: I7f2379e520617c14514fc66d8fb3413cfb7c9147
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If QEMU is provided sysroot with QEMU_LD_PREFIX, it opens files from there. If their
owner is the current user, testing their access rights based on assumption that they
are root fails. Skip the tests in that case similarly as is already done when the
tests are run as root.
This fixes following tests:
- tst_QTemporaryDir::nonWritableCurrentDir
- tst_QNetworkReply::getErrors(file-permissions)
- tst_qstandardpaths::testCustomRuntimeDirectory
Task-number: QTBUG-59966
Change-Id: I972ce37b4b5a7747cdd732a8e4a737ef09cbc6a5
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qstrcmp sorts null strings before empty ones, while the Qt string
classes consider them equal.
The qt_compare_strings() overload for QLatin1String was using
qstrcmp(), but is supposed to implement the semantics that Qt string
classes use, so we need to add an extra check.
Was uncovered by tests for QLatin1String::startsWith(), but added a
new test for qCompareStrings() now, which is a bit more complicated
than desired, due to the lack of QUtf8String.
Change-Id: I0493c4491df928a68861a1bc7f0962f1c870a416
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We guarded against the Unicode form being invalid and did not produce an
encoded form. But we did not guard against proper Punycode sequences
that decode to forms that had not passed the proper Nameprep stage. So
check for that and, if it fails, just keep the label in the form we
found it in (it's valid STD3 anyway).
[ChangeLog][QtCore][QUrl] Fixed a bug that caused certain domain names
that look like Internationalized Domain Names to become corrupt in
decoded forms of QUrl, notably toString() and toDisplayString().
Task-number: QTBUG-60364
Change-Id: Iadfecb6f28984634979dfffd14b833142cca8d0d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
[ChangeLog][QtTest][QCOMPARE] Now supports printing QStringViews in
case of test failures.
Change-Id: I4dc2542cd1013fd63c094c249e721d7102387bde
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The whitelist is kept in ACE form, so if the TLD came in Unicode, we
need to run ToASCII before we can check the whitelist. This is slightly
inefficient because we'll run the same operation later in this domain.
Change-Id: Iadfecb6f28984634979dfffd14b831f37b0f4818
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Florian Bruhin <qt-project.org@the-compiler.org>
In the spirit of std::thread, which takes a function to call and its
parameters, and runs it in a new thread. Since the user might want to
connect to signals, move QObjects into the new thread, etc., the new
thread is not immediately started.
Although technically all of this _should_ be implementable in pure
C++11, there is nothing in the Standard to help us not reinvent all the
plumbing: packing the decay'd parameters, storing them, invoking the
function over the parameters (honoring INVOKE/std::invoke semantics).
std::function does not do the job, as it's copiable and therefore does
not support move-only functors; std::bind does not have INVOKE
semantics.
I certainly do not want to reimplement all the required facilities
inside of Qt. Therefore, the full blown implementation requires C++17
(std::invoke).
In order to make this useful also in pre-C++17, there are two additional
implementations (C++11 and C++14) that support just a callable, without
any arguments passed to it. The C++11 implementation makes use of a
class to store and call the callable (even move-only ones); basically,
it's what a closure type for a C++14 lambda would look like.
An alternative implementation could've used some of the existing
facilities inside QObject::connect implementation that store a functor
(for the connect() overload connecting to free functions), namely:
the QtPrivate::QFunctorSlotObject class. However:
* QFunctorSlotObject does not support move-only callables (see
QTBUG-60339);
* QFunctorSlotObject itself is not a callable (apparently by design),
and requires to be wrapped in a lambda that calls call() on it;
* the moment QTBUG-60339 is solved, we'd need the same handwritten
closure to keep QFunctorSlotObject working with move-only callabes.
So: just use the handwritten one.
The C++14 implementation is a simplified version of the C++11 one,
actually using a generalized lambda capture (corresponding to the
handwritten C++11 closure type).
All three implementations use std::async (with a deferred launch policy,
a nice use case for it!) under the hood. It's certainly an overkill for
our use case, as we don't need the std::future, but at least std::async
does all the plumbing for us.
[ChangeLog][QtCore][QThread] Added the QThread::create function.
Change-Id: I339d0be6f689df7d56766839baebda0aa2f7e94c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Factor out both CreateProcess calls into one function that also calls
the modifier callback for the CreateProcessArguments struct.
Task-number: QTBUG-57687
Change-Id: I9d2ef4f2d7cd077aa4c3eba926ab4dfb9e570291
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This was simply not working for two reasons:
- The index passed to QMetaObject::metacall was not right (there was an offset
because of the return type)
- If the registration succeeded, the arguments were not even initialized.
The tests in tst_moc always called QMetaMethod::parameterType before calling invoke,
which was properly registering the type. So this was not seen in the tests before.
[ChangeLog][QtCore][QMetaMethod] Fixed crash in invoke() with QueuedConnection and
types whose metatype gets automatically registered.
Task-number: QTBUG-60185
Change-Id: I4247628484214fba0a8acc1813ed8f112f59c888
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It only contained a concatenation of the individual rule sets,
probably to fix their order in a central place, as well as
simplifying iteration in defaultCategoryFilter().
Fix these two issues differently, but introducing a RuleSet
enum that lists rule sets in the order in which they should
be applied by defaultCategoryFilter(), and turn individual
rule sets vectors into a C array of vectors.
This enables two nested loops in defaultCategoryFilter to
replace the one loop over 'rules'. Apart from building up
'rules' in updateRules(), this was the only access to that
member. That leaves updateRules() with just the task of
running defaultCategoryFilter() on the new rule sets.
Consequently, a call to updateRules() can now replace the
identical loop in installFilter().
Performance should not suffer. Iterating over a fixed-size
array of vectors is hardly any slower than iterating over
a single vector, and while the construction of 'rules'
was probably a one-off task in most programs, this way
of keeping the rules also saves memory because rules are
not kept in two different vectors.
It is also more maintainable, of course.
Change-Id: Ibc132d096c8137dd02b034752646212e51208637
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
... instead of the combination with Q_OS_WIN we used so far.
This patch adapts ocurrences that are new in 5.10.
Change-Id: If392df481713e56c776c2326e0e02324a3a80c89
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As for the formatting code, de-duplicate the parsing code by only
parsing char*s, converting QChars to Latin-1 first in a small buffer.
The QUuid(const char*) ctor performed no length checking, relying
instead on the checks performed within _q_uuidFromHex(), which
includes an implicit check for premature end (because NUL is not
a valid token for the parser).
The (QString) and (QByteArray) ctors did perform length checking.
To the extent possible, this is removed, since it is handled by
_q_uuidFromHex(). Failure cases need not be optimized. Only the
QLatin1String overload needs to do some checking, because views in
general are not NUL-terminated. The QStringView overload can just
append a NUL when it converts to Latin-1.
The only check I added to _q_uuidFromHex() is that for src ==
nullptr. It would otherwise be duplicated in several callers.
While touching the internal functions, port to passing and returning
by value.
Saves 1.6KiB in text size on optimized GCC 6.1 Linux AMD64 builds,
even though we added new API.
Port some users to the new functions. Expand fromString() test.
[ChangeLog][QtCore][QUuid] Added fromString(QStringView/QLatin1String).
Change-Id: I519339419129550c86e0ea80514865cd6a768f5d
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
8a375341cf added swap() to QJson* classes
and marked them shared-not-movable-until-qt6.
That unveiled a broken test in QVariant which was relying on QJsonDocument
being not relocatable. So fix the test by using a proper datatype for the task.
Change-Id: Ic35f09f936b00dfaeb368ccb42aecf35cc506029
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
8a375341cf added swap() to QJson* classes
and marked them shared-not-movable-until-qt6.
This change made QMetaType start reporting that QJson* classes were
movable; however, the test used QTypeInfo and not QTypeInfoQuery to
double check that information.
Port the test to QTypeInfoQuery.
Change-Id: I3227a70a8f24c0013257e180e9cb9cfebe9947f9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since commit bf2160e72c, we can rely on
charNN_t support in all compilers except MSVC 2013, and since that
commit, we use (in 5.10, not 5.9, yet)
!defined(Q_OS_WIN) || defined(Q_COMPILER_UNICODE_STRINGS)
when we only need charNN_t, the type, as opposed to its library
support (u16string, char_traits<char16_t>, ...).
This patch splits the Q_C_UNICODE_STRINGS macro into two, adding
Q_STDLIB_UNICODE_STRINGS for when we need std::uNNstring, leaving
Q_C_UNICODE_STRINGS for when we need just charNN_t support.
In QDebug, when constructing a QChar out of a char16_t, cast to ushort
first, since QChar(char16_t) was only officially introduced in Qt 5.10.
[ChangeLog][Potentially Source-Incompatible Changes] The internal
Q_COMPILER_UNICODE_STRINGS macro is now defined if the compiler
supports charNN_t, even if the standard library does not. To check for
availability of std::uNNstring, use the new Q_STDLIB_UNICODE_STRINGS
macro.
Change-Id: I8f210fd7f1799fe21faf54506475a759b1f76a59
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 47cc9e23a3.
We use QCoreApplication::applicationDirPath in the logging initialization to find
a possible qtlogging.ini file. Because QCoreApplication::applicationDirPath requires
a QCoreApplication instance this leads to a qWarning, which in turn leads to a
recursive call to the logging initialization, and in turn to a recursive mutex deadlock.
Task-number: QTCREATORBUG-18031
Change-Id: Ic75e1e8c062eb647991725378489bf87c9648cca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Allows categorized logging before QCoreApplication has been created,
which otherwise would silently fail to output anything because the
category would never be enabled, despite QT_LOGGING_RULES being set.
Change-Id: Ia733105c5b6f28e22af511ced5271e45782da12b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
