Testcase appearsAndSort failed when running the complete testcase but
not as single test. More irritating was the fact that the error was in
QAbstractItemModelTester::headerDataChanged() but the affected test did
not change any header nor does it use the blamed model...
The reason for this is, that QAbstractProxyModel emits a queued
headerDataChanged signal when the header item count changes and
therefore only evaluated when the event loop is run.
Fix it by calling processEvents() after the rowCount change in
filterColumns().
Amends 72e802f3b0
Pick-to: 6.6 6.5
Change-Id: I10cb5aa9c40a6925113cc9c23616774bf15784a4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
a611a9f537 (in Qt 5) added support for
mixed-type comparisons through QCOMPARE. That commit added a new
overload for qCompare taking two types, T1 and T2; but it also left the
same-type qCompare(T, T) overload around, guarded by a Qt 6 version
check.
The mixed-type version is however not a generalization of the same-type
one, because it won't work if one of the arguments doesn't participate
in FTAD. Case in point: braced-init-lists. In Qt 5 this worked:
QCOMPARE(some_container, {42});
but in Qt 6 it does not work any more. The mixed-type overload fails
deduction (can't deduce T2); in Qt 5 the same-type overload deduced
T=SomeContainer, and {42} was used to select a constructor for
SomeContainer.
--
There's a partial, straightforward workaround for this: default T2 to
T1 in the mized-type overload. In that case T2 has a "fallback" if it
cannot be deduced. This is partial because of course doesn't address
the case in which T1 cannot be deduced, but I don't think that is
common at all.
QList is special here, because it has qCompare overloads that makes it
comparable with arrays, initializer lists and more. I don't like that
very much -- we should probably have a qCompare(input_range,
input_range) overload, but that's an exercise for C++20.
Change-Id: I344ba33167829984978cd8d649a1904349a9edab
Pick-to: 6.5 6.6
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Replace D-BUS with correct splling D-Bus in the source code,
Keep the old spelling inside XML DTD declarations for compatibility.
Change-Id: Ifa5d43f9fa1417431c81cf1bce0d897a966409b9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use this format when reporting diagnostics relating to a source file:
<file name>:<line>:<column>: {error|warning|note}: <message>
This makes it easier to find the source elements that caused
a diagnostics report.
Fixes: QTBUG-2597
Change-Id: I8d8d13f7d71d1ce0c5050a0d08dddd33f9997f27
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a structure for annotation data containing
name, value and location information. This is done
to be able to emit diagnostics related to annotations
that include source location.
Task-number: QTBUG-2597
Change-Id: Ie990bcd0a16752b5f44f4314f8d730dd1b1a30b4
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Hiding a button in a QDialogButtonBox doesn't remove its default and
focus behavior. Hiding the button shown in the first position, breaks
the focus chain. Tabbing between the button is no longer possible.
This patch implements listening to the buttons' HideToParent and
ShowToParent events. Hidden buttons are removed from the button box
and kept in a separate hash. That ensures focus chain consistency.
When they are shown again, they are added to the button logic and
their default/focus behavior is restored.
An autotest is added in tst_QDialogButtonBox.
Fixes: QTBUG-114377
Pick-to: 6.6 6.5
Change-Id: Id10c4675f43d6007206e41c694688c4f0a34ee52
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
When QDebug::quoted(), indicates the encoding using the u/u8 prefixes
or the _L1 suffix. This is information that might come in handy, and
we plan to make it off-switchable (QTBUG-114936). The default should
be true, though, for QAnyStringView, because we should confront users
with this feature so they learn it exists. For concrete view types,
changing the default behavior is probably not a good idea.
[ChangeLog][QtCore][QAnyStringView/QDebug] Can now stream
QAnyStringView into QDebug.
Fixes: QTBUG-114935
Change-Id: Icd5bf700c8b7958e942468b54248487998f262d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add the boilerplate standalone test prelude to each test, so that they
can be opened with an IDE without the qt-cmake-standalone-test script,
but directly with qt-cmake or cmake.
Boilerplate was added using the following scripts:
https://git.qt.io/alcroito/cmake_refactor
Manual adjustments were made where the code was inserted in the wrong
location.
Task-number: QTBUG-93020
Change-Id: I77299f990692b4fe4721a9bc35071608d0d23982
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Add the boilerplate standalone test prelude to each test, so that they
can be opened with an IDE without the qt-cmake-standalone-test script,
but directly with qt-cmake or cmake.
Boilerplate was added using the following scripts:
https://git.qt.io/alcroito/cmake_refactor
Manual adjustments were made where the code was inserted in the wrong
location.
Task-number: QTBUG-93020
Change-Id: I000cd3b0809b6417c3b1ab520e4de746afee71fc
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add the boilerplate standalone test prelude to each test, so that they
can be opened with an IDE without the qt-cmake-standalone-test script,
but directly with qt-cmake or cmake.
Boilerplate was added using the following scripts:
https://git.qt.io/alcroito/cmake_refactor
Manual adjustments were made where the code was inserted in the wrong
location.
Task-number: QTBUG-93020
Change-Id: I3c0d1a63c474969e5eaee5fdbb1bb0229482fc5b
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add the boilerplate standalone test prelude to each test, so that they
can be opened with an IDE without the qt-cmake-standalone-test script,
but directly with qt-cmake or cmake.
Boilerplate was added using the following scripts:
https://git.qt.io/alcroito/cmake_refactor
Manual adjustments were made where the code was inserted in the wrong
location.
Task-number: QTBUG-93020
Change-Id: I2ef59684cf297a0222a136ce7b5630037294d000
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add the boilerplate standalone test prelude to each test, so that they
can be opened with an IDE without the qt-cmake-standalone-test script,
but directly with qt-cmake or cmake.
Boilerplate was added using the following scripts:
https://git.qt.io/alcroito/cmake_refactor
Manual adjustments were made where the code was inserted in the wrong
location.
Task-number: QTBUG-93020
Change-Id: I28b6d3815c5f43d2c33ea65764f6f3f8f129eaf3
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There were setters (quote(), noquote()), but, unlike
space()/nospace(), there was no getter.
Add the getter, and, for symmetry, a parametrized setter, too.
[ChangeLog][QtCore][QDebug] Added setQuoteStrings()/quoteStrings() to
access and manipulate the quote()/noquote() state.
Change-Id: I1b73138819b4d02726a6ef862c190206431ccebc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix 'IN_LISTS' typo, should be IN LISTS.
Pick-to: 6.5 6.6
Change-Id: Ia0bd1bf45922b2c9c1779e03b40dad6eab97eef1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
So that building tst_qlogging also builds qlogging_helper. Helps with
local testing where you only build and run tst_qlogging instead of the
whole repo.
Change-Id: Ib36ff3e55e04794534d6cb7a23f243aae61d0005
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch allows to open databases using QFile. This way it
can open databases from RW locations as android shared storage
or even from RO resources e.g. qrc or android assets.
[ChangeLog][QtSql][SQLite3 driver] QtVFS for SQLite3 allows to open
databases using QFile. This way it can open databases from RW
locations such as android shared storage, or even from read-only
resources e.g. qrc or android assets.
Fixes: QTBUG-107120
Change-Id: I889ad44de966c96105fe1954ee4eda175dd5a886
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
`QVariant::convert` may lead to crash or produce garbage data when
attempting to convert a gadget between a pointer type and a value type,
for example from a variant holding a QLocale gadget to a QLocale*
pointer and vice versa. Similarly, `QVariant::view` may crash under the
same conditions.
The reason is that conversion is implemented through copy construction
assuming that both source and target types are either both pointers or
both values. If converting from pointer to value type, the result is
crash during destruction of the QVariant. If converting from value to
pointer type, the result is a QVariant holding a pointer to garbage
data (and possibly crash if pointer is dereferenced).
Similarly, if attempting to convert a pointer to a QObject derived type
to its value type, the system crashes, with a slightly different failure
mode. During `QVariant::convert`, a temporary `QVariant` of the target
type is created. Since objects that can not be copy constructed are
invalid for `QVariant`, the temporary is left empty without constructing
the target value. Then, when attempting to convert from a pointer type
to a value type, the temporary's destructor is incorrectly called on the
owned object. Since the owned object is never constructed, this leads to
a crash.
The proposed fix is to return false from `QMetaType::view`,
`QMetaType::canView`, `QMetaType::convert`, and `QMetaType::canConvert`
if the target type is of different 'pointedness' than the source type.
After this fix, converting and viewing gadgets and QObjects behaves the
same way as primitive types and core types, which already returned false
when converting between value type and pointer type.
Fixes: QTBUG-114797
Pick-to: 6.5 6.6
Change-Id: If5ad764a60f2f3c912070198073b28999d995f17
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
because it's flaky in current CI setup.
Task-number: QTBUG-109776
Pick-to: 6.6 6.5
Change-Id: I3e432e632622f47b8125344187daf238a03a7372
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Using chrono means one can write 10s instead of 10'000.
[ChangeLog][QTest] Added qSleep(std::chrono::milliseconds) overload.
Change-Id: Iac1b12a3fc3f692b557e2d459e6f3bc565f20e93
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a result of d8bbb5ee0e, we
were no longer calling QDialog::done(), which users may have
overridden.
We now pull out the dialog code to determine whether to
emit accepted/rejected directly in done(), so that we
can go back to calling QDialog::done().
Pick-to: 6.6 6.5
Change-Id: Ie08270123d61d9010acd8c989b66986f71960ad0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
They're already suppressed for clang.
-Wself-move was added in GCC 13.1, the CI still doesn't have that so
wrap it in an "#if Q_CC_GNU >= 1301".
Change-Id: I5c2ec78a5003485261b4e3125f85c5b78dd0db22
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To maintain flexibility in how we store the features, we
introduce accessors through indirection rather than accessing
the property directly.
Made as response to API review.
Pick-to: 6.6
Change-Id: I3e5d4ddabe93f67796af4626fddefe028ded9888
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars@knoll.priv.no>
... and collapse adjacent C string literals.
Both QStringBuilder and non-QStringBuilder builds have no problem
resolving an operator+ for char[] and QByteArray, so there's no need
to turn the char[] into a QByteArray using the _ba UDL first.
It just causes pain because not all active branches support this UDL,
so remove, to bring this code in line with what the cherry-picks to
6.2 and 5.15 must needs had to use.
Amends 6326bec46a.
Pick-to: 6.6 6.5 6.5.2
Change-Id: Id3d61483729c51c82f58b826efcc8fc7960c3ccd
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
This is similar to and extends the prevention of thread cancellation
introduced by commit ba05af82d3. This
prevents the situation in which a signal gets delivered (usually because
of a crash) and the parent process' handler is run, doing things it
shouldn't between vfork() and execve().
Most C libraries (all that I've investigated) unblock SIGABRT on
abort(), so this doesn't affect them. Likewise, on most OSes, crashes
ignore the signal block and terminate the application -- Darwin appears
to be an exception, but vfork() is not enabled there. Both situations
are tested by terminateInChildProcessModifier().
Task-number: QTBUG-113822
Change-Id: Ib5ce7a497e034ebabb2cfffd17628ca33969b7af
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
There are two temporaries, reply.arguments() returns a temporary QList
and list.at(0) returns a temporary reference to the first element. The
local reference variable would only extend the lifetime of the temporary
object it's bound to, list.at(0), but not the temporary list itself.
Even though this a false positive in this case because QList is
implicilty shared, the compiler can't tell the difference and the fix is
simple.
tests/auto/dbus/qdbusabstractadaptor/tst_qdbusabstractadaptor.cpp:1845:21:
warning: possibly dangling reference to a temporary
[-Wdangling-reference]
1845 | const QVariant &retval = reply.arguments().at(0);
| ^~~~~~
tests/auto/dbus/qdbusabstractadaptor/tst_qdbusabstractadaptor.cpp:1845:50:
note: the temporary was destroyed at the end of the full expression
‘QDBusMessage::arguments() const().QList<QVariant>::at(0)’
1845 | const QVariant &retval = reply.arguments().at(0);
| ~~~~~~~~~~~~~~~~~~~~^~~
Pick-to: 6.6 6.5 5.15
Change-Id: I03d54b56769cbd0f9f1165e4679ec4947267181a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
So no-one 'fixes' the test by pinning synchronizer.futures() into a
named variable or collapsing the two lines into one. Both would break
the premiss of the test.
Amends e8dcbaaaf6.
Pick-to: 6.6 6.5 6.2
Change-Id: I7a98c382a7db0bf3ff369dcaf61af0942796d6a3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This fixes a crash while parsing an XML file with garbage data, the file
starts with '<' then garbage data:
- The loop in the parse() keeps iterating until it hits "case 262:",
which calls fastScanName()
- fastScanName() iterates over the text buffer scanning for the
attribute name (e.g. "xml:lang"), until it finds ':'
- Consider a Value val, fastScanName() is called on it, it would set
val.prefix to a number > val.len, then it would hit the 4096 condition
and return (returned 0, now it returns the equivalent of
std::null_opt), which means that val.len doesn't get modified, making
it smaller than val.prefix
- The code would try constructing an XmlStringRef with negative length,
which would hit an assert in one of QStringView's constructors
Add an assert to the XmlStringRef constructor.
Add unittest based on the file from the bug report.
Later on I will replace FastScanNameResult with std::optional<qsizetype>
(std::optional is C++17, which isn't required by Qt 5.15, and we want to
backport this fix).
Credit to OSS-Fuzz.
Fixes: QTBUG-109781
Fixes: QTBUG-114829
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: I455a5eeb47870c2ac9ffd0cbcdcd99c1ae2dd374
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
As requested in code review. Big improvement, code-wise.
tst_Sleep::wait() was failing on the CI, so be more accurate by using
QElapsedTimer::durationElapsed(), which returns nanoseconds.
Pick-to: 6.6
Change-Id: I5bed6d6bd768adfdecab2475e6cbe245c20aabd7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Map QNetworkError::HostNotFoundError and QNetworkError::ConnectionRefusedError
to ProxyNotFoundError resp. ProxyConnectionRefusedError when it originated
from the communication with the proxy server.
Fixes: QTBUG-68821
Pick-to: 6.5 6.6
Change-Id: I21b91f2667ba0cd329d4ece1fe543472cdab2d22
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test turns out to be flaky on QEMU.
Fixes: QTBUG-114760
Pick-to: 6.6 6.5
Change-Id: I264f79e9a056e82d4e6735e6ead0710ddabd8eba
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This minimizes any multi-threading / file-locking issues as the file is
closed once the contents are read.
This change assumes /proc/self/mountinfo is available on Linux systems,
and doesn't fallback to setmntent(). It's been around since at least
Linux Kernel 2.4.0.
This requires exporting qstrntoll() for the unittests (using
QT_AUTOTEST_EXPORT and wrapping the those unittests in "#ifdef
QT_BUILD_INTERNAL"), otherwise linking fails.
Fixes: QTBUG-77059
Change-Id: I0363258a9979ea6dadfe5e36c02534ffbd3386c5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
We were basically timing the qSleep, which is pointless. We don't need
to verify that qSleep(X) spends at least X time. Because it also
doesn't. Somehow, QNX can execute 1000 ms sleeps in 996 ms.
Amends commit 30e5ff3ff2.
Pick-to: 6.6 6.5
Change-Id: I46b5dede27114be29724fffd176a66c1799075b7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Gerrit says it refuses to color lines that exceed 500 characters, so
let's split this line to get colors back.
Pick-to: 6.6 6.5
Change-Id: Iab6d37332e27ecdeaf1420da6fa242ca65f0aab5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test needs investigation. Skip it for now so that we can enable
CI for WASM but leave a note to investigate it.
Task-number: QTBUG-109954
Change-Id: I445996e969e7016a4d92a7e70da10b6d84a0fc71
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Two QCOMPARE calls aren't worth the extra indirection.
Change-Id: If3b54d303c28582c7df29a3f1c4dc1a2c2a974f4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a table view adds its first row, QHeaderView::initializeSections()
is called. It initializes the vertical header view with the number of
added sections. Subsequently QHeaderView::sectionsInserted() is called
with the same amount of newly added rows/sections.
That leads to the initial amount of sections being 2x the number of
rows added in the first go. In other words, the table view will display
at least one row more than the underlying table model has.
This patch adds an OR condition to the early return check at the
beginning of QHeaderView::sectionsInserted(). The method returns early
if the number of sections equals the number of respective sections
(rows in this case) in the model.
An autotest is added in tst_QTableView::rowsInVerticalHeader().
Fixes: QTBUG-114225
Pick-to: 6.6 6.5
Change-Id: I895444f025591981965562e54e2335391db52357
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
33c88f86b5 added some logic to QAPM in
order to have it automatically emit headerDataChanged when rows/columns
were added or removed in the model. This was done as a stopgap measure
to prevent QAPM from asking for illegal indices in order to implement
automatic remapping of the section headings (since there's no
mapSectionToSource).
The commit seems to have introduced a regression in QHeaderView, which
isn't prepared to receive headerDataChanged while a row/column count
change is in progress. When receiving headerDataChanged, QHeaderView
will try to read the row/column count and will store it internally.
When it will then receive the signals for insertion/removal of
rows/columns, it will interpret it as a modification of the previously
stored value -- even if the value it stored was already correct.
Fix this by avoiding to have two signals in flight at the same time;
emit headerDataChanged as a queued invocation.
Task-number: QTBUG-114225
Change-Id: I521465a852b8c7135f22f730ead41dca760ba428
Pick-to: 6.5 6.6
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
INTEGRITY has a pre-P1115 implementation of std::erase/erase_if that
returns void instead of the number of erased elements, so make q20's
implementation more specialized, so the compiler will pick it over
INTEGRITY's (Marc's idea from the code review).
Change-Id: I88d025a3f90cdd65f5bb73beb8a39e32ccf12d9b
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Wrappers around P1301 [[nodiscard("reason")]].
[ChangeLog][QtCore][Q_NODISCARD_X/Q_NODISCARD_CTOR_X] Added as
wrappers around C++20 [[nodiscard("reason")]].
Task-number: QTBUG-114767
Change-Id: Ie566d9c9d500ef632c7e243af97081f83506a752
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Under some circumstances, MSVC seems to complain about SlotArgumentCount
being unused
qobject.h(210): warning C4189: 'SlotArgumentCount': local variable is
initialized but not referenced
note: see reference to function template instantiation
'QMetaObject::Connection QObject::connect<void(__cdecl QAction::* )(bool),
main::<lambda_1>>(const QAction *,Func1,
const QtPrivate::ContextTypeForFunctor<main::<lambda_1>,void>::ContextType *,
Func2 &&,Qt::ConnectionType)' being compiled
This is nonsense, as SlotArgumentCount is used in the next line, to
construct the list of signal arguments, but the workaround to declare
the variable as [[maybe_unused]] is trivial.
Add a connect statement to the test case that creates such a connection.
This does not produce any warning with or without the attribute (and if
it did, the build would fail for CI configuratinos setting -Werror).
Pick-to: 6.6
Fixes: QTBUG-114781
Change-Id: I4ee6f7d57c2836ef3dd9741d037d48181af2cdec
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
And take the opportunity to clarify what the QtVforkSafe namespace is
doing. Amends commit e71c226d6f.
Pick-to: 6.6
Change-Id: I443cf0c8a76243eead33fffd1767f3fa390a7cdd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
When setFuture() was handed an element of m_futures, it would hold the
reference to past the clear(), which invalidates said reference.
Fix by taking the future by value instead of by cref.
While append() is not affected, as QList::append() already guards
against aliasing, do the same change there, both for consistency as
well as to optimize the common case of passing rvalues. It also means
we can use the rvalue overload of QList::append(), skipping the alias
analysis in the lvalue QList::append().
[ChangeLog][QtConcurrent][QFutureSynchronizer] Fixed a crash in
setFuture() if the argument was already a member of
QFutureSynchronizer::futures().
Pick-to: 6.6 6.5 6.2
Change-Id: Ic0b212b9f265a746df9a6beb6272a5415d131442
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QWidgetPrivate::focusObject() always returns nullptr. That has lead to
mismatches between QGuiApplication::focusObject() and
QApplication::focusWidget(), when a widget got focus by the window
system (e.g. mouse click).
This patch implements QWidgetPrivate::focusObject.
It returns the current widget, if it doesn't have a focus proxy.
If it has a focus proxy, it resolves the proxy chain and returns the
deepest focus proxy.
(Note: It does not return QWidget::focusWidget(), because the focus
widget might not yet have been set, when the method is called).
Fixes: QTBUG-92464
Fixes: QTBUG-108522
Pick-to: 6.6 6.5 6.2
Done-With: Liang Qi <liang.qi@qt.io>
Change-Id: Icf01e8ac4fc5f722fbf8e0ca5a562617ae9ae8f2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Use the new argument to bundle the OpenSSL prebuilt libararies so that
ssl operations are actually tested at runtime.
Task-number: QTBUG-110025
Pick-to: 6.6 6.5
Change-Id: I0d73fed463a1724a9e0ee84ba603aa2ff1bc649b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
