don't put them into GENERATED_HEADER_FILES, as they obviously cannot be
found in a pre-synced source dir. instead, let the injection code itself
add them to INJECTED_HEADER_FILES.
Task-number: QTBUG-67813
Change-Id: Id2a7c565b14fcba8aba9d1dd8b1dd39c586d0d91
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
these are actually redundant with INJECTIONS.
Change-Id: I0a71930401e00d30c9898b4d958de5e89c496d18
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
instead of relying on more or less accidental qmake behaviors regarding
the base dir for relative paths (esp. if a file does not exist yet),
make everything explicit. to that effect, clearly define the base tree
(source or build) for every syncqt-generated variable, and write only
in-tree relative paths to the variables. on the receiving end, resolve
the paths as soon as headers.pri was read.
Task-number: QTBUG-67111
Change-Id: I32ae5760fb62ebc650fdb69e46aac786a8141564
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
in non-prefix configs, one has to differentiate between the module's own
build dir and qtbase's build dir, because the forwarding headers are
placed in -outdir under include/, while the actual headers end up in the
real build dir under src/.
Change-Id: I1d8ac904556b354bd113995316ba11dd6560a70d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This warning used to be part of -Wconversion, but that generates too
more noise than we're willing to fix now (like conversion from qint64 to
int). The float conversion does trigger for conversion from double to
float, as shown in all the QVectorND uses of float, but more
importantly, it triggers on passing floats to ints.
Change-Id: I69f37f9304f24709a823fffd14e69cfd33f75988
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The module might add QT_RESTRICTED_CAST_FROM_ASCII to DEFINES to
be able to use string literals under the assumption they are UTF8
without warnings from QT_ASCII_CAST_WARN, but this conflicts with
QT_NO_CAST_FROM_ASCII which is added for the headersclean build
step.
Change-Id: Ic1d7b5415350477d751a6c15219d4f8feb816a3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Creating a precompiled header exclusively for a one- or two-file module
is wasteful. The time that it takes to build the precompiled source is
on the same order as a regular compilation, so enabling precompiled
headers for those modules just makes the build slower.
Also make it possible to override the precompiled header by just setting
PRECOMPILED_HEADER to empty.
Change-Id: I0e1a09998253489388abfffd14b5f221288c4826
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This warning is added in MSVC 2015 and is printed when we use noexcept
in modules we turned exceptions off.
Task-number: QTBUG-59645
Change-Id: Id92f4a61915b49ddaee6fffd14ae3b943ccd2bce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The compiler is mostly GCC in disguise, but the libraries are not. Since
the toolchain is not open, it's difficult to fix issues in it.
Task-number: QTBUG-59671
Task-number: QTBUG-59672
Change-Id: Id92f4a61915b49ddaee6fffd14aea2639153f073
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
the target of the injected forwarding header doesn't exist at qmake
time, as it is generated by an extra compiler, so the touch() calls in
qt_module_headers.prf would fail.
the error scenario described in ce942a226 is not applicable to
gui/vulkan, as no bootstrapped modules are involved. therefore, we can
just suppress the timestamping.
Change-Id: I1c9b6fcdf3717069fdbb654e3cb5d73b199192f4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
the borrowing of headers always happens from "proper" modules which are
actually built as frameworks if so requested. that means that even
though the borrowing module itself never is a framework, it needs a
framework path and include paths that point into frameworks.
amends 20c7ab44.
Change-Id: Ic582060dd179cc592e9be7792ff02cebdfabd772
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Our headers ought to be clean in all compiler versions.
Change-Id: I4a7dc1fe14154695b968fffd14aba9ff9995c618
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Fixes: warning: implicit conversion from 'float' to 'double' to match
other operand of binary expression [-Wdouble-promotion]
Task-number: QTBUG-57068
Change-Id: I897a341aca83873bc6abd256a82a3b9f09409833
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it makes no sense to version them, as they contain only #defines anyway.
it also removes the need to special-case their location in shadow builds
with pre-synced headers, which we actually failed to do anyway.
Task-number: QTBUG-56286
Change-Id: I4ea717f7be56494cfea0572389bea173d7470b6e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This macro expands into a static_assert and can be used to
trigger a compile error if a certain feature is not available
when trying to compile some code.
This is especially useful to protect against accidental inclusion
of headers that implement functionality related to a feature.
Change-Id: I456c55b989ce5f35f3af0e13c1886a85c23dfe29
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This change implements the required infrastructure to modularize the new
configuration system.
This requires a hierarchy of configuration files, both for handling
multiple repositories and for individual modules inside the same
repository.
When configuring, they all need to get loaded first, as command line
processing needs to know about all possible command line options.
When the command line has been processed, the individual configuration
files need to get processed one after the other and independently from
each other.
Configure is now automatically invoked when building the a project
tree's "root" project; this works with both modular and top-level builds
of Qt (the latter with an according change in the super repo). As an
immediate consequence, the -skip option moves to the super repo with a
different implementation, as configuration is now done after the repo
list is determined. The option belongs there anyway.
This commit also adds an optional testDir entry to the json file. Like
this, we can still have all configure tests in qtbase/config.tests and
the configuration file in, e.g., corelib can reference those.
The files section can now be left out as long as a 'module' entry is
present, specifying the module name. The names of the files to generate
can then be deduced from that name. We still need to be able to specify
names directly for the global configuration files.
qtConfig() now also queries features which are module-specific. As it is
sometimes necessary to query the configuration of modules which should
not be actually linked (and cannot in the case of subdirs projects), the
new variable QT_FOR_CONFIG which allows specifying configuration-only
dependencies is introduced.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Id1b518a3aa34044748b87fb8fac14d79653f6b18
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
they are build-time generated, so they must go to the build dir
irrespective of whether we're using pre-synced headers.
Task-number: QTBUG-55585
Change-Id: I5f10b35c40b0ae2ddc5568d70e254b787ac3f914
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this wasn't possible when these headers were still generated by syncqt,
as the targets may have been still missing at that time. however, as we
do that now with qmake, forwarding the timestamps is perfectly possible,
and is consistent with what syncqt itself does for "regular" headers.
the immediate problem this solves: when the early creation of the
forwarding headers in qtbase.pro is removed, they get created only when
corelib.pro is processed. their timestamps would be after the timestamps
of the already built bootstrapped libraries. if now the project files of
these libs get re-created, qmake's not conditional-aware dependency scan
would add these headers to the libs' deps, thus causing them to be
re-built. the re-built tools would in turn cause all mocs and thus all
libraries to be re-built. this would be particularly problematic if it
happened between 'make' and 'make install' due to another bug ...
Change-Id: I8d597f1f925369d93aaf3cc6c02e954eeae003a4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
get rid of the entirely superfluous stock "Aborting." messages -
the event triggering the exit has already reported the problem.
Change-Id: Ib9dfb9e4212f60eceb2ea432cdf56c5a8afe9d65
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
instead of unsetting the flag later on, don't set it in the first place.
Change-Id: Id448500b02b5c3e1dc7c332cc178a84c7fd2cfdc
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the main objective was to fix the bootstrap modules in framework builds.
bootstrapped modules which "borrow" headers from "proper" modules can
specify this in a clean way now.
a side effect of this is that the bootstrap-dbus module now has its own
syncqt call.
most includepath-related setup from qt_module_pris.prf was moved to
qt_module_headers.prf.
Change-Id: Ie0d8192cfac1a8cdae0ddd0bc0cd8c3092b1e85b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This should help improve the cleanliness of our source code, including
compliance with the C++ standards. They apply to all of our code except
examples (they don't load qt_common.prf).
Change-Id: Ia0aac2f09e9245339951ffff13c94663c1901766
Reviewed-by: David Faure <david.faure@kdab.com>
the projects which use full mode with the named modules have them.
Change-Id: I3b9383d1cc2b43411c25690a5e35e7e84a55aa23
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
that way other modules can use the headers without hacks.
this required making the base directory for paths in headers.pri
configurable in syncqt.
Change-Id: Id35cfe05bcf4c576d3f2d0d8d09590a5e23d21d3
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
The former is meaningless nowadays.
Change-Id: I27c7eb0e924f3f2e9b73185f1b198909aeb6b031
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
this makes the distclean targets work throughout qt.
the dreaded confclean target is aliased to distclean.
Task-number: QTBUG-8202
Task-number: QTBUG-20566
Change-Id: I7ac8e3b5b0110825dc93e4fa885281db91c6cf83
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is neither a point in building a PCH that will never be used, nor
does it even work with the aux TEMPLATE.
Change-Id: I2fe11f951f81adf5e15066ed60f983003c76b451
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Test each include file directly, instead of doing a large #include. This
verifies that each header is compilable on its own. One big advantage of
doing it via a special compiler in qmake is that we skip pre-compiled
headers, which has hidden build errors in the past.
This solution is implemented by making syncqt produce a second list of
headers. This list is the same as the list of headers in the source
code to be installed, minus the headers that declare themselves to be
unclean, via the pragma:
#pragma qt_sync_skip_header_check
This mechanism is applied only for public libraries (skipping
QtPlatformSupport, an internal_module).
This test is enabled only for -developer-builds of Qt because it
increases the compilation time.
On QtTest: the library only links to QtCore, but it has two headers that
provide inline-only functionality by including QtGui and QtWidgets
headers (namely, qtest_gui.h and qtest_widget.h). If those two modules
aren't getting compiled due to -no-gui or -no-widgets to configure, we
need to remove the respective headers from the list of headers to be
checked. If they are being built, then we need to make QtTest's build
wait for the headers to be generated and that happens when qmake is
first run inside the src/gui and src/widgets directories.
Change-Id: I57d64bd697a92367c8464c073a42e4d142a9a15f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
spaces in the source dir are not supported for now, as that requires
some more profound refactoring of the bootstrap makefiles.
Change-Id: Ie0c07a1558b8326f642f2ea144bc1cd85ee761af
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
when a module delegates to another module (as the activeqt ones do), it
doesn't have a master header to be included. we could derive the real
master header by doing a transitive dependency resolution and some
filtering, but that seems unnecessarily complex.
Task-number: QTBUG-41892
Change-Id: Ie7ce51a837ac06e929b204ec734206c11b3ae241
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
to this end, add a mode to qtPrepareTool() which prepares the primary
variable for system() use (instead of use in makefiles).
Task-number: QTBUG-41032
Change-Id: If6aa6c206a70ecdbc2ea05bbb3cb470414fb02b1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Revert cb09e1e889 for MinGW. gcc on Windows reproducably crashes
when the pre-compiled header becomes big enough ...
Change-Id: Icd5a3dfbe59f5ff5c78832e7b4436d0f1cfa1031
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When qtbase has been compiled with PCH and trying to compile the
disassembler in QtDeclarative creating the PCH for "C" is failing
due the C++ includes. Guard the includes with __cplusplus to be
"usable" on C code. This guard is proposed for the "stable.h" in
the qmake precompiledheaders documentation.
Change-Id: I7a8fb9e59c666a2e1535d988fd71c5cd67d0587d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We'll use the master depends header for the module as the precompilation
header. We could use the master include, but tests show that
precompilation benefits taper off for big precompiled headers. The
important part is to get the Standard Library headers precompiled.
Each module can still override which header to precompile by setting
PRECOMPILED_HEADER after load(qt_modules). It can also turn off
precompiled headers by setting that to empty or by CONFIG -=
precompile_header.
Testing a few build times shows the following improvements (GCC 4.8 with
-O3 and C++11):
QtPrintSupport: 14.7%
QtOpenGL: 22.7%
QtDBus: 29.5%
QtSvg: -2.4%
QtXmlPatterns: 26.1%
QtQml: 21.6%
QtQuick: 25.0%
QtMultimedia: 9.0%
QtSerialPort: -30.0%
QtHelp: 5.6%
The numbers also show that precompilation is worse for small modules.
Change-Id: I3793fafcedaff5456527cd6b3777ffd162975c36
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
let the syncqt + qt_module_header.prf pair handle generation of
forwarding headers.
in qtbase this is ineffective to some degree, as the need to create
QtCore's forwarding headers early for QtBootstrap requires qtbase.pro
already doing the real work, but at least we get the verification that
nothing breaks.
Other Modules (TM) will need the full functionality.
Change-Id: Ifd3dfa05c4c8a91698a365160edb6dabc84e553f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
rename MODULE_PROFILE_DIR to MODULE_BASE_INDIR.
force MODULE_BASE_OUTDIR to be always the shadow of the above.
rename MODULE_BASE_DIR to MODULE_SYNCQT_DIR (the former is still
recognized for backwards compat with webkit).
the idea behind these changes is making the variable names and override
possibilities reflect their actual use.
Change-Id: Ica4062d7231a0ce13241670e0d0f43e6b1b97160
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the logic in the configures was even trying to express that, only that
nowadays we always ship syncqt, so the tests were kinda pointless.
this frees us from the perl dependency for non-developer builds of
packaged modules (except for webkit, which needs almost every scripting
language on earth anyway).
obviously, this requires that the packaging scripts run syncqt in the
source dir before tarring up the sources. note that for repositories
other than qtbase, the -version argument needs to be passed to syncqt.
Task-number: QTBUG-29465
Change-Id: Ic929ab17a5de4b30fbf48b3aa9bfa3b4d2ef37d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
now that we split out the part that depends on the project file, we can
do it cleanly here.
this way we can generate these headers at pre-build time already.
and for git builds, perl is probably faster than qmake at this task.
Change-Id: I343255c6de22329471a3ae2c2aac9ebeb160a501
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
