CMake does it for non-project-based try_compile calls if the
CMP0056 policy is set to NEW. That was introduced in CMake 3.2,
thus set it unconditionally.
The use case is to pick up custom -rpath-link paths when
cross-compiling.
Pick-to: 6.4 6.5
Change-Id: I726b90267dd46de116052b5b7f19b9354a568200
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This should be handled later ideally, for now we should skip and
QML tests targets are still being produced, which leads to errors
on WASM.
Task-number: QTBUG-109786
Change-Id: I3d0d1f3115e324c7a0cb036e972226310294b216
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Calling qt_process_qlalr with a skipped/batched target name results
in an error. Do the same as for other helper functions and handle
these two cases.
Task-number: QTBUG-109786
Change-Id: I774b148989a25d01bdf724e69a722aae132389ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Tests generated with qt-cmake-standalone-test will now not be
batched by default. Defining the QT_BATCH_STANDALONE_TESTS
environment variable will make the build system batch them.
Fixes: QTBUG-111226
Change-Id: I9f01c662e22f8ffdd33e1c4d82619db0689fecc7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt_internal_add_test_helper will fail if a test batch is missing and
batching is enabled. It will now copy to the parent binary directory
as without batching for simplicity, as this happens when batched tests
are skipped.
One consequence could be that when the first test specified has
the NO_BATCH argument, this will incorrectly install the helper, but
helpers still need extra work to function properly, so for now we just
make it compile.
Task-number: QTBUG-109786
Change-Id: Ib307ae79799422c2a4102885aa007ef043835e50
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The result of dependency lookup is not taken into account when
evaluating tool packages. Check for <ToolPackage>_FOUND before creating
the tool targets that belong to the tool package. Adjust the tool package
lookup that the dependencies always affect the lookup result even if
we avoided creating targets by setting QT_NO_CREATE_TARGETS.
Pick-to: 6.5 6.5.0
Change-Id: Ia95c9c71370becc639ed8a9db026aed2f93959b4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Firebird has it's include files in <include>/firebird so we should also
search there.
Pick-to: 6.5 6.2
Change-Id: Ief57abbfd6973ab9077abc1a1a2791a62ce4102a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is related to QTBUG-110978, but not a complete fix.
Task-number: QTBUG-110978
Change-Id: I91b757addde8213ba3d356a590f6e4cf68187c31
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Manual tests are supposed to display UI and be assessed manually, but
currently they use the auto test runner by mistake.
Use the normal wasm shell to fix this and make them work like usual
applications.
Fixes: QTBUG-111753
Change-Id: I9d3c0ad56e913b73737c5b72087e82980989d8b8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Supressing the linking warnings on macOS are relevant when we are
using AppleClang and not upstream Clang.
The provided arguments do not apply to llvm-ar and llvm-ranlib.
Change-Id: I8b664c01802b47077eb0ab80dab7681ee0bfcaa9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When doing a top-level build with ExternalProject examples, it doesn't
make sense to make qtbase examples depend on e.g. qtdeclarative
plugins. Instead the qtbase example should only depend on plugins
built in qtbase.
Create per-repo custom targets that depend on all plugins built within
that particular repo.
Create an additional per-repo target which depends on all
plugins built in that repo, as well as plugins from dependent repos.
Use the latter as a dependency for examples built as part of the
current repo.
Repo dependencies are parsed from dependencies.yaml.
Pick-to: 6.5
Fixes: QTBUG-110913
Change-Id: I149860cc549caf53271c9ea296eb7bac2a663715
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Recent Emscripten 3.1.27 reduces the stack size to 64KB,
which is way to small for Qt-based applications.
Restore the previous stack size (5 MB) by setting STACK_SIZE.
Change-Id: I6c25e31b32dc1d551fa423655fcef4891830bcd1
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
They now share their implementation. Manual tests can be created by
passing the MANUAL arguments to the qt_internal_add_test as well.
Pick-to: 6.5
Fixes: QTBUG-111382
Change-Id: I1c207b7e4a67526554df1ee43fe032bb20fc92fa
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Matthias Rauter <matthias.rauter@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The previous attempt failed as target coin configuration doesn't
use superbuild. Skip the tests based on the TESTED_MODULE_COIN
environment variable
Task-number: QTBUG-109786
Change-Id: I0dbe6ff64ca4a2e81fef377865ef4e99b58c5eb2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We set CMAKE_POSITION_INDEPENDENT_CODE to ON and require CMake 3.16.
This sets CMP0083 to NEW and should pass -fPIE to linker calls as well.
However, the PIE-enabling flag is not passed to the linker unless we
call check_pie_supported(). This behavior is documented in CMake's
CMP0083 documentation page.
[ChangeLog][CMake] Qt tools are now built with position independent code
even with Unix toolchains where this is not the default, for example
clang.
Pick-to: 6.5 6.4 6.2
Change-Id: I1d98e0ea7063a76e3fddc94d6555c6eaf14c7885
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Properties specified in EXPORT_PROPERTIES have their values exported
verbatim, without evaluating generator expression they might contain.
This limitation is removed by the introduced functions. They collect
properties that needs to be exported and evaluate generator
expressions inside the properties using file(GENERATE) before
exporting them. The functions generate the ExtraProperties.cmake
file that contains set_property calls with exported properties
and corresponding values.
Change-Id: If32c30a82a62e8bd48bb91f3df21ff2ad8d07243
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit e3ecabad22.
Reason for revert: This breaks the CTest internal switches. So it's better to disable testing directly in submodule.
Change-Id: Ia93dc3bb0a3a34021c8e2d6c3d292e3a4909bef5
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This switch should help switch off some time consuming operations
that make sense only whe configuring Qt project from IDE.
The switch is INTERNAL and depends on environment variables defined
by IDE application when running cmake:
- Qt Creator, detected by QTC_RUN environment variable
- CLion, detected by CLION_IDE environment variable
- Visual Studio Code, detected by VSCODE_CLI environment variable
Pick-to: 6.5
Change-Id: I44086376109a8af8ebb7ecd8bf64dc34f0631527
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The QtSql for Mimer SQL sqldriver makes it possible to work with the
Mimer SQL database on different plattforms. There are drivers for
several other databases in QtSql and a driver for Mimer SQL will
benefit many users.
To build the Mimer SQL driver, download Mimer SQL from
https://developer.mimer.com
[ChangeLog][QtSql]
Added a QtSql plugin to work with the Mimer SQL database
Fixes: QTBUG-111219
Change-Id: Id6ba5de4de01189d0516ffbfa89efcb0d013115f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This reverts commit 545400addd.
Reason for revert: Adding NO_CMAKE_PACKAGE_REGISTRY doesn't resolve the initial issue. So reverting this change as redundant.
Change-Id: I284600d6f0e0f2408a7a8b31827251dad4c73eba
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This reverts commit 854986836a.
This reverts commit 392d9a5419.
Turns out that enabling this option is now breaking the Qt build,
because tools that are called by the Qt build cannot run anymore due to
the lack of rpaths.
Before, QT_DISABLE_RPATH was simply turning off Qt's additional rpaths
but left CMake's rpath defaults intact.
To implement a working -no-rpath switch we must add Linux and macOS code
paths to _qt_internal_generate_tool_command_wrapper and set
LD_LIBRARY_PATH/DYLD_LIBRARY_PATH and friends.
Pick-to: 6.5
Fixes: QTBUG-110816
Change-Id: I021d5e6cd775cbe5b2411d6771ab2545cb04f799
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Allow forwarding the NO_CMAKE_PACKAGE_REGISTRY option to the
find_package call from qt_find_package.
When we look for host tool packages the package dependencies are
recorded in the cmake package registry. This leads to the situation
when the lookup retry will use the package that is already found in
host path instead of looking the right one in target paths.
Adding the 'NO_CMAKE_PACKAGE_REGISTRY' to the qt_find_package calls
suppresses records in cmake package registry and starts a clean search
using target paths.
Task-number: QTBUG-111140
Pick-to: 6.5
Change-Id: I97ce1755b2f8e3413f1b0276fe26568b2f5efe33
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This leads to unwanted side issues such as building and running third
party component tests. The option should be enabled explicitly by
user instead.
Fixes: QTBUG-111091
Change-Id: I8942db2bd089ad2a39a70627bfce8314b101ecb8
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Cleanup the generated message regarding the configuration summary. Also
moved the flushing into the helper function.
Pick-to: 6.5
Change-Id: I45728ac5b43613f002b6d5b07b9ad037416c4fff
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Apparently, more and more librt functionality are being moved to glibc
these days, e.g., clock_gettime, clock_getres, clock_settime,
clock_getcpuclockid, clock_nanosleep. As Thiago mentioned, in face,
all librt functions are moving into glibc, but unlike the clock_*
functions that I can see are ported from 2.17+, I cannot find out when
and what functions are already ported. So, here, I added a second test
which tries to explicitly look for shm_* functions, if they are there,
as well as the clock_* function, then we are more confident that we
actually have a useful the libRt in the system.
Also, making the FEATURE_posix_SHM depends on UNIX.
Pick-to: 6.5
Fixes: QTBUG-111049
Change-Id: I08b7f4656ecd9313b552fb05ca7096f5b987b95a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The tracepointgen tool needs to know the enumeration/flag names
and values in order to generate metadata for the tracepoints
in order to pass this information when tracing.
Currently the metadata needs to be provided to the tracepointgen by
hand. This implements metadata parsing from header files.
Task-number: QTBUG-110598
Pick-to: 6.5
Change-Id: Ibb2cc6e724fd2defca4e301af2285b0fdbe8e7f7
Reviewed-by: Antti Määttä <antti.maatta@qt.io>
Consider a Qt target created in a subdirectory and a call to
qt6_generate_deploy_app_script(target) in the parent directory.
Once qt6_generate_deploy_script (called by
qt6_generate_deploy_app_script) is run, the target has already been
finalized. However, qt6_generate_deploy_script needs to run before
finalization, because:
- qt6_generate_deploy_script marks the target as to be deployed
- the finalizer generates plugins information only if the target was
marked to be deployed
Fix this in qt6_generate_deploy_script by checking whether the target
was already finalized. In that case, generate the plugin deployment
information right away.
Pick-to: 6.5
Fixes: QTBUG-109741
Change-Id: Idf60f9e21f038c1a33843177d9299230857ee70b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If -unity-build-batch-size is not given, we default to CMake's default
which is 8. In QtSetup.cmake, we explicitly set the default to avoid
having it set to OFF in case it is missing, just to make sure that we
don't get any unintended behavior.
Task-number: QTBUG-109394
Change-Id: I19849e9baa507b64fb23847c740e20a7adc61b8f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
- The following commands accepts NO_UNITY_BUILD, and
NO_UNITY_BUILD_SOURCES arguments to opt out of the unity build, and
to exclude some source files from unity build, respectively.
- qt_internal_add_executable
- qt_internal_add_module
- qt_internal_add_plugin
- qt_internal_add_tool
- qt_internal_extend_target
- qt_internal_add_common_qt_library_helper
- qt_internal_add_cmake_library
- qt_internal_add_simd_part
- Unity build is disabled by default in these:
- qt_internal_add_test
- qt_internal_add_test_helper
- qt_internal_add_benchmark
- qt_internal_add_3rdparty_library
- qt_update_ignore_pch_source also excludes the files from unity_build
Pick-to: 6.5
Task-number: QTBUG-109394
Change-Id: I5d0e7df633738310a015142a6c73fbb78b6c3467
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce the qt-cmake-create script. The script generates the simple
CMakeLists.txt based on the source files located in the current or
specified directory. The initial version can generate a CMake code for
the following file types:
- .c .cc .cpp .cxx .h .hh .hxx .hpp - generates the qt_add_executable
call with prerequisites.
- .qml .js .mjs - generates the qt_add_qml_module call with
prerequisites.
- .ui - adds the found ui files to the existing executable. Requires
C++ files be present in the directory too.
- .qrc - generates the qt_add_resources call and adds the resources
to the existing executable. Requires C++ files be present in the
directory too.
- .proto - generates qt_add_protobuf call with prerequisites.
The QtInitProject.cmake script contains the 'handle_type' function that
allows extending the script capabilities and establish simple relation
chains between the file types.
Note: The initial implementation doesn't deal with sub-directories, so
all files from sub-directories will be added to and handled in the
top-level CMakeLists.txt file. This can be extended by user request.
Task-number: QTBUG-104388
Change-Id: I5abd9e07da109e867ff95986572ed2bf02ef9d3d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This somewhat indicates the progress of configuring a specific
repo and the slower period of time when configuring examples
in-tree.
Pick-to: 6.5
Change-Id: I643536c4ebc865933730b7af2a1d0c56bbbf2912
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This reverts commit d7e8d5bb1b.
Reason for revert: Found a working solution for the issue.
Change-Id: Ia720cc63ece9dfb1a24067cdd9c3d79d4edbe3be
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
- If no version specified, policy version is set to 6.0.0, therefore
warnings will be shown, encouraging users to set a policy.
- Update qt_policy() documentation
- Update qt_standard_project_setup() documentation
- Update the policy warning message
- Added the missing comment to clarify the extra_code region
Pick-to: 6.5
Task-number: QTBUG-96233
Change-Id: I8358fdeb880a34c96f13fc2a6cbef6afe048c4d6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
To extract system proxies, the one we used previously, was not available
on iOS and thus we could not obtain system proxies there. Support is
limited - no such things, as SOCKS/FTP/etc. proxies, only PAC (auto
configuration), and HTTP/HTTPS. There are no keys to extract info
about HTTPS, so instead we'll use CFNetworkCopyProxiesForURL (
looks like this enables exclusion lists (which are hidden)
functionality and apparently from the system point of view HTTP/HTTPS
are the same.
Fixes: QTBUG-39869
Change-Id: I73af719a2e2b5cded706e6b3faa4b8eaa879352b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Right now, "multi abi builds" of android projects works only if the
android-build installation doesn't use custom install dirs
(INSTALL_PREFIX, INSTALL_BINDIR...)
At the same time, it fixes QTBUG-106533. The patches are the same as the
ones in that bugreport.
Add new items to android-*-deployment-settings.json:
qtDataDirectory
qtLibsDirectory
qtLibExecsDirectory
qtPluginsDirectory
qtQmlDirectory
Update androiddeployqt to be able to get files from their install location
BTW (fixes QTBUG-106533):
Install src/android/templates into INSTALL_DATADIR
Install src/3rdparty/gradle into INSTALL_DATADIR
Install src/android/java files into INSTALL_DATADIR
Install all jars into INSTALL_DATADIR
Add missing path to target_qt.conf
Update target_qt.conf to have all path. Otherwise qmake wouldn't have
the path when installing the android-build with custom install dirs
like INSTALL_LIBDIR & friends
Add support for a new cmake variable that can be set at build time of the
android projects: QT_ANDROID_PATH_CMAKE_DIR_${abi} (Name chosen as
brother of QT_HOST_PATH_CMAKE_DIR)
Pick-to: 6.5
Fixes: QTBUG-106533
Fixes: QTBUG-107207
Change-Id: Ia3751362ab1b5f877ecafbe02f263feac167119c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
KDE Frameworks tests this in one build configuration. Verify that we
do not break it in public Qt headers.
Task-number: QTBUG-110585
Change-Id: I5c976d00d7b1aba026e99acb9bad176103e23b0b
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
We must not set rpath-related properties on INTERFACE libraries. Move
the code that sets the properties below the bail out for INTERFACE
libraries.
This amends commit 392d9a5419.
Pick-to: 6.5
Fixes: QTBUG-110513
Change-Id: Ie395f1482245c4522917f982d2f3bc745c0b2abc
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The extra quote enforces the arguments to be string, and stops the
COMMAND_EXPAND_LISTS within
QtDbusHelpers.cmake::qt_create_qdbusxml2cpp_command from expanding it
as a list.
Fixes: QTBUG-110459
Fixes: QTBUG-110450
Task-number: QTBUG-99238
Change-Id: Ifddd6570c7bf8f2d1757f275d9445ce2924a93f1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
The batcher does not currently work properly with non-qtbase
submodules. Disable them temporarily so that at least the
tests in qtbase are batched. Do this from qtbase so that changes
to each and every submodule are not necessary.
Also, maintain a list of tests that were thus skipped. On any
qt cmake internal function call that refers to such a target,
identify the target as skipped and make the call a no-op.
Fixes: QTBUG-109785
Change-Id: Ib0aa5d39eee8315ffd4ac62f6d1f44fe9bbf7a2f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
AUTOUIC doesn't handle relative paths to .ui files in parent
directories when using Ninja Multi-Config.
The designer tool in qttools has such a ui file. This leads to the
following error when trying to build qttools together with examples as
ExternalProjects and Ninja Multi-Config:
ninja: error: 'src/designer/src/designer/designer_autogen/
include_Debug/ui_preferencesdialog.h', needed by
'src/designer/src/designer/designer_autogen:Debug',
missing and no known rule to make it
Until cmake is fixed, we can work around the issue by not adding
designer as a dependency when building EP examples, because no example
tries to use the app.
We can't exclude all apps from example dependencies because some
modules use qt_internal_add_app for tools as well, which are called
from public CMake API and also examples.
An example of this is qtapplicationmanager.
Given that we can't exclude all apps, introduce a function to
allow skipping single targets when building EP examples.
This will allow excluding designer specifically.
The examples will now depend on a new ${repo}_src_for_examples target
rather than ${repo}_src, which will exclude skipped targets.
Task-number: QTBUG-90820
Task-number: QTBUG-96232
Task-number: QTBUG-110369
Change-Id: I2f900253bbf7bac917f2293ef604ab3ea8f298e1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In addition to the fix, I've removed some legacy codes in the
`configure` file and delegated most of the work to
the `QtWriteArgsFile.cmake` which was being used by `configure.bat`. I
am not sure how this was supposed to work before since it was not really
working, but now, `config.opt` lives in the build directory, together
with `config.opt.in` (a template file), and the `config.redo` (and
`config.redo.in`) which holds the full redo command. The template files
are being used to preserve the quoted variables and to help
QtWriteArgFiles process the opt files more consistency.
Also fixed an issue on Unix, where ./configure was failing to run if
its path contained spaces, e.g., `Qt Src/qt5/configure`.
Fixes: QTBUG-108287
Change-Id: I9843b690a1fd3177a93e55e08a3484a4c85ba2e8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This alone isn't enough:
Feature "xcb": Forcing to "ON" breaks its condition:
QT_FEATURE_thread AND TARGET XCB::XCB AND TEST_xcb_syslibs AND QT_FEATURE_xkbcommon_x11
Condition values dump:
QT_FEATURE_thread = "ON"
TARGET XCB::XCB found
TEST_xcb_syslibs = "FALSE"
QT_FEATURE_xkbcommon_x11 not evaluated
But when it says:
-- Performing Test XCB (extensions) - Failed because XCB::CURSOR not found
The user can know what to do.
Pick-to: 6.4
Change-Id: I810d70e579eb4e2c8e45fffd1719c0abf608ed30
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It doesn't seem like that it is being used anymore, except an instance
in pro2cmake which I replaced by NO_GENERATE_METATYPES.
Pick-to: 6.5
Change-Id: I135cf47e6041e98b354fb684f0079dad30689dea
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This replaces the qt_parse_all_arguments macro with the built-in
`cmake_parse_arguments(PARSE_ARGV`. In addition, a new function,
_qt_internal_validate_all_args_are_parsed, can be used to check whether
any _UNPARSED_ARGUMENTS have been passed to the function.
Fixes: QTBUG-99238
Change-Id: I8cee83dc92dc6acdaaf747ea6ff9084c11dc649b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
$<CONFIGURATION> is deprecated from CMake 3.0
Pick-to: 6.5
Change-Id: I1b19507a8cb3325095440e0a22fc54f9fde77e9b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We must explicitly set the GENERATED property on source files we
generate.
This amends commit f0a7d74e1d.
Change-Id: Ifab405cd98deece49a1566ae04220e2b5d576429
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The -no-rpath configure switch had no effect.
Pick-to: 6.5
Change-Id: I306ec33249a219066ce94d18da5f1ca3d92905e1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
__GlobalConfig_install_dir translates to lib/cmake/Qt6/ and 3rdparty
modules will be in lib/cmake/Qt6/3rdparty which seems to be a logical
place for them.
Pick-to: 6.5
Change-Id: I90c715b9502b0dfc666bb3202a838f20ba6110cf
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QT_FEATURE_ltcg is TRUE if either of
CMAKE_INTERPROCEDURAL_OPTIMIZATION=ON or
CMAKE_INTERPROCEDURAL_OPTIMIZATION_<CONFIG>=ON are passed to the
configure, or the cmake command.
Pick-to: 6.5
Change-Id: Ibaece67de6cc6f89e505038fd02fb50008c47d48
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There was a plan to invert the API, but since the TODO, we are settled
on the non-inverted name, ie., GENERATE_CPP_EXPORTS.
Pick-to: 6.5
Change-Id: I84f531d870965e0b7d0d821d1ff08606ab8054ab
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
<out_var>_private_header_dir and <out_var>_private_module_header_dir are
documented to point to "the specific framework version and framework
bundle version".
Pick-to: 6.5
Change-Id: I00053f106ec9be88f7892c842ca75549cfc54124
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This works by collecting the paths of all blacklist files
and deferring a call which ultimately reads all of the files and
glues them together to form a master blacklist file for the batch.
There might be conflicting function names inside the batch. For now
we ignore the problem, while keeping in mind that it exists.
Fixes: QTBUG-110016
Change-Id: I9c8412097418c6e93297ab89af718d7466e2e451
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Alexandru mentioned that at the time qtdeclarative was still using the
variable, but from then, he replaced those as well, and I couldn't find
any usage anymore either.
Change-Id: I6a1893c2dfaa483dc8cb865f7bacf08cadca985b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Stub targets introduced in 65b7aacb make the old batch target detecting
measure in qt_internal_extend_target,
qt_internal_undefine_global_definition, qt_internal_add_resource
obsolete, since now the targets actually exist in the build system.
Unconditionally fail if the target does not exist and if it does, query
for its inclusion in the batch
Change-Id: I1cd1d8cc7fbf4bdbd2289a1b38ecbea1e93a06c8
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
In developer builds we don't install tools, so syncqt executable is
located in its RUNTIME_OUTPUT_DIRECTORY but not by install path. This
works fine in general case, but in multi-config builds the
RUNTIME_OUTPUT_DIRECTORY path doesn't match the install path. So syncqt
target points to wrong location in this case. It makes sense to use the
existing IMPORTED_LOCATION of syncqt executable directly if Qt is not
supposed to be installed. Also check if the syncqt executable exists at
the expected location before creating the imported target.
Pick-to: 6.5
Fixes: QTBUG-109864
Change-Id: I0de647b2a73169a0d48bd88edeb7ff00975fa774
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The flag avoids overriding of the default CMake build config when
building syncqt.
Add extra checks to the make sure that configure-time tools use the
correct build type.
Fixes: QTBUG-109792
Pick-to: 6.5
Change-Id: I572fed60c58e59297fa559aea6eb86af94b979b7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Implement platform independent tracing backend in Common trace format.
This allows tracing in platforms without own/existing backend and
analysing all platforms with the same tooling. The backend is the basis
for further work in application level profiling area.
The backend is implemented as a plugin that is loaded immediately when
the application starts in order to process all trace events. The backend
avoids using Qt classes so that it doesn't generate trace events
itself. Adds plumbing to configure the new backend.
Modifies the tracegen and tracepointgen tools to support the new
backend.
Task-number: QTBUG-106399
Pick-to: 6.5
Change-Id: I80711be52d4d48e1acbc72edffbdf3f379fce52a
Reviewed-by: Tomi Korpipää <tomi.korpipaa@qt.io>
Add it globally so that each module using tracepoints don't have to
add it themselves to each modules configure.cmake.
Pick-to: 6.5
Change-Id: Id58cfaff5cd715b2667da2470001d646117f9f28
Reviewed-by: Tomi Korpipää <tomi.korpipaa@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Allows automatically generating tracepoint files by scanning source
files for instrumentation macros.
This makes it easier to add tracepoint support to modules and also
ensures that the tracepoint files do not get out of sync with the
functions they are tracing.
Q_TRACE_INSTRUMENT generates entry/exit tracespoints for a function
it is set. Q_TRACE_PARAM_REPLACE is used to change a function parameter
for these functions to convert it to supported parameter type.
Q_TRACE_POINT can be used to create a standalone tracepoint.
Q_TRACE_PREFIX can be used to add prefix for generated tracing backend
for example to add includes for types used in the trace points..
Task-number: QTBUG-107238
Pick-to: 6.5
Change-Id: Ib395b80838434ceb72683dac0545ca20c4d09455
Reviewed-by: Tomi Korpipää <tomi.korpipaa@qt.io>
Consider a cross build of Qt with qtbase, qtshadertools and
qtdeclarative. If a user projects only links against QtQml without
creating an actual QtQuick module, no host tools from qtdeclarative are
needed.
Normally, find_package(Qt6Qml) pulls in Qt6QmlTools and errors out if
it's not found. By setting QT_ALLOW_MISSING_TOOLS_PACKAGES when
configuring Qt, one can disable the error and build a user project such
as the one outlined above.
Pick-to: 6.4 6.5
Fixes: QTBUG-109547
Change-Id: I45e727713912d19e6007a7fbf3d61533f82b71d9
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Jaeyoon Jung <jaeyoon.jung@lge.com>
Otherwise CI hangs if no existing browser can be reused (typical
case)
Fixes: QTBUG-109876
Change-Id: I63436a23c23c4b74c27c18effafde53bb6a4a34e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This doesn't seem to be relevant anymore, and the
`from_lib_location_to_prefix` seems to be set correctly.
Change-Id: I368da226ed33a303662856b0bc3ccbf6c328250a
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The new version uses PARSE_ARGV which deals with semicolons better.
Task-number: QTBUG-99238
Change-Id: Ie9276219400326a67ffa9cf5fc456ae7de0bbcd2
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
We decided that it's better to disable PkgConfig for Android, as it is
unlikely that someone uses them.
Task-number: QTBUG-110007
Pick-to: 6.5 6.4 6.3 6.2
Change-Id: I6ae1059ddd05feeec047fbb906c7dba1586e816b
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This is needed for static plugins to work correctly as currently
the only place where plugin logic is handled for non-standalone
builds is in qt_internal_add_executable - adding the library later
when encountered in one tests that get batched does not trigger
plugin handling logic.
Fixes: QTBUG-109812
Change-Id: Idcc2bc6b42b2b7ad6afb9796f554b0529de3de5f
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
As of f68e2c92cc, and its follow up
changes, we can now link individual plugins statically, even if the
Qt build is generally a shared build.
This allows us to build Qt for iOS as shared libraries, while still
keeping the platform plugin as a static library, since this is
harder to port over to a shared library.
This gives the benefit of faster turnaround during development, as
well as binary compatibility promises for the main Qt libraries,
without having to go fully shared for all of Qt.
Static builds are still the default, due to the downsides of larger
application bundles and slower load times for shared builds.
For now the user has to manually tick the "Embed & Sign" check
box in Xcode for each Qt library, which is only available with
Xcode projects generated by the qmake Xcode generator.
Task-number: QTBUG-85974
Change-Id: Id2b7bd2823c8e7c79068dda95295b574ada8d7f2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
According to the CMake documentation, IMPORTED_TARGET should be
specified before the moduleSpec, and after QUIET.
Additionally, double-quote the moduleSpec everywhere, since before, it
was only quoted in some cases.
While this is not required for pkg_check_modules to work, it unifies the
coding style.
Pick-to: 6.5
Change-Id: Ic8ad708a8146f9b39ee40e9a719412441e231452
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
When encountering a batchable target, only add its defines to the
sources that the target contains. Otherwise, the defines interfere
with other tests in the batch.
Fixes: QTBUG-109848
Change-Id: I35d1665d29bb0ce93b82059f7f3b715070539d21
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Set the RUNTIME_OUTPUT_DIRECTORY for configure-time executables so
executable will be located inside the QT_BUILD_DIR. This allows to
re-build syncqt and make sure ithat ts binary is replaced and located
in the libexec directory.
Comment on how to rebuild syncqt. Configure-time tools reserve the
original tool name for the imported executable. To re-build syncqt use
'syncqt_build' target.
Task-number: QTBUG-109792
Change-Id: Id7d912b1d75d18d82cb2a69fbd62b89440120d78
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
All current modules are free of qAsConst, make sure new ones will be,
too.
Change-Id: Iae3c67bca86eddf62ae664b00ff39a9b513d7290
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
qt-cmake-standalone-test uses add_subdirectory call when evaluating the
project. This leads to an error if users try to use path to
CMakeLists.txt as an argument, instead of directory when configuring
standalone tests with qt-cmake-standalone-test. It makes sense to check
if the user-specified path points to CMakeLists.txt and cut the
filename part when calling add_subdirectory.
Pick-to: 6.5 6.4 6.2
Change-Id: I6b9ac0ca8323eaf11f219eb1e6bed3057120a231
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
...to 'name'.
It's clear from the context that this is the name of a module.
Pick-to: 6.5
Change-Id: I07700a4413ceb12695c153e16d0a2dcded615d11
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
syncqt arguments contain full paths and may exceed the supported
command line size on some platforms. Use a single rsp file to pass
all arguments to syncqt.
Added the missing end-of-line terminators for error messages.
Pick-to: 6.5
Change-Id: I60ad0f6770458d5256e67f042a63a3c16cd5ecb5
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Make options for enabling "simd128" and "exceptions" public:
-feature-wasm-simd128
-feature-wasm-exceptions
Make sure both appear in the config summary and feature
list. Move the exceptions code so that they are next to
each other in the cmake file.
Pick-to: 6.5
Change-Id: I3975b56703f40f7ffff270754535bc2eb5bfe488
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Qt 6.5 will require emscripten 3.1.25. This is not the
most recent version (3.1.27 at the time of writing),
however .26 and .27 make changes to stack layout and size
which require further investigation.
Change-Id: Ibe285ef160d450d6b2c63a7fb71d3561b0032e37
Reviewed-by: Aleksandr Reviakin <aleksandr.reviakin@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
This makes sure the browser only uses a basic password store and
doesn't try to do anything fancy with the OS pass store, since it
causes an issue on opensuse (kwallet isn't set up in CI).
Change-Id: Ib48a15f4834fa9bb26cf8cf3fff9bb4d0fd0238a
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Static Qt builds are not covered by BC guarantees, but since all
'libraries' are linked into a single executable, we face in all users
of the library the same ODR violation that we faced within the
implementation DLL: we can't define the same symbol as inline in some
TUs and out-of-line in others.
In the past, we decided to always inline in static builds, but that
breaks users which, by Hyrum's Law, have come to depend on the
non-existent BC guarantees for static Qt builds.
By switching to never inline¹ in static builds, we restore BC for such
users. The performance issues should be minimal, since LTO will anyway
inline whatever it wants, independent on how it was declared.
¹ except when the deprecation point has passed over the Qt version the
API was inlined (-disable-deprecated-up-to configure switch).
[ChangeLog][QtCore] Restored binary compatibility for static Qt
builds broken by the QT_INLINE_SINCE mechanism. Qt still does not
guarantee BC for static build configurations otherwise.
Fixes: QTBUG-109449
Pick-to: 6.5 6.4
Change-Id: Ie3fa62621b74dc5e9dac301b9882c0e3c3999eaf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We've ported all qExchange() to std::exchange by now, across all
modules, but the one in QScopedValueRollback was left behind, because
it requires C++20's version of std::exchange (constexpr).
Since q20::exchange was not approved, replace the qExchange() here
with two moves and add a comment to port to std::exchange() once we
can depend on C++20.
Then add QT_NO_QEXCHANGE to avoid new uses from creeping in.
Change-Id: I488e252433e78fb2766639dbe77a22a55196cfd1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The .bat extension was already handled for, __qt_cmake_private_path,
and adding the extra one was causing an issue where
qt-cmake-standalone-test was calling qt-cmake-private.bat.bat!
Amends 8aae821b5a
Pick-to: 6.5
Change-Id: I9c374440c89c617e31f369fde8f041e5c1d17a03
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This simplifies deployment and eliminates the possibility
for duplicate downloads due to the browser/server not
understanding symlinks.
Change-Id: Ife22c052c424f309d76ff0f9118c01e98426da95
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We agreed that qt-configure-module needs to come back to bin/ as it's
user-facing.
Amends d77ce33082
[ChangeLog][CMake] Upon further consideration, qt-configure-module
was deemed user-facing, and was thus moved back to ./bin on
all platforms.
Task-number: QTBUG-107621
Change-Id: I1f7874436e5b3988242091fc0303ea828f29d5c6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When collecting the dependencies of a target, it can happen that we
encounter a target that is not visible in the current directory scope.
This can usually be fixed by moving the corresponding find_package call
to a higher directory.
Detect this situation and print a warning with instruction how to
silence this warning: either by fixing the situation or by setting
QT_SILENCE_MISSING_DEPENDENCY_TARGET_WARNING.
Fixes: QTBUG-108286
Change-Id: I9033fedbd81ef0710b7cc11fab0e94e67c74ff86
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This mimics CMake's policy support. The policy state is stored in an
internal __QT_INTERNAL_POLICY_<policy> variable; by using normal
variables, we gain support for stacking for free.
Policies can be explicitly en- or disable via qt6_policy; that command
also has a GET mode to retrieve them again.
Furthermore, one can now pass min and max version to
qt6_standard_project_setup, to opt in to a certain set of defaults
introduced in a given Qt version.
We add support for policies in QtModuleHelpers, so that we can check for
known policies while building Qt itself.
No actual policies exist yet; but a follow up commit will introduce one
for qt_add_qml_module.
Change-Id: I57a0404c9193926dd499f94cc5f73e359355c0b3
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Qt Creator maintains a mapping from Qt version to Android NDK version
and other build information. It's simpler to let the Qt build write the
Android build information into modules/Core.json and have Qt Creator use
this information.
This adds the following properties to the module JSON files:
- built_with.android.api_version
- built_with.android.ndk.version
Task-number: QTBUG-108292
Change-Id: I0febda5192289c5afb1a098880b31bef6317db35
Reviewed-by: Marcus Tillmanns <marcus.tillmanns@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The module description JSON files contain architecture-specific
information. Therefore they should reside below INSTALL_ARCHDATADIR
instead of INSTALL_DATADIR.
Moving these files should be unproblematic as there are no known users
of these files.
Change-Id: Ibff1f7b6ce2d1633ebce33861358ad5d1cae2beb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
At the moment when doing a non-prefix build and changing some of those
files, CMake will not update the changes to the build folder unless
done manually or a re-configure is done manually.
qt_copy_or_install() only does copy those files at configure time once,
and using CMAKE_CONFIGURE_DEPENDS would be an overkill here and even
a bit of an extra annoyance, so in this case having a custom command
seem to be suitable.
Done-with: Alexey Edelev <alexey.edelev@qt.io>
Change-Id: I55aa9e9d3eea32a4bb54c64abd4cbdcb891c44b6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
It looks like adding dependencies to interface libraries is either not
fixed or broken in CMake versions newer than 3.20. Remove the CMake
version check to ensure that 'lib_pri' targets are executed. This will
restore the initial behavior.
Amends cfcc4ef8ed
Pick-to: 6.2 6.4
Fixes: QTBUG-109240
Fixes: QTBUG-109239
Change-Id: I8c5b317fcdd0a715a1a668b4e955df1acfe4be8b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Upstream commits:
db46fc981fd8c1a46d923aeaf2187dfcc8b50099
1e9e1c508e177b6466282dfad273cf6cfcdf5c76
One useful change is removing the "XINPUT from XCB is experimental"
warning, it's been around and the default for ages.
Task-number: QTBUG-109183
Change-Id: Ie66aa76c5e3ce83d5d654cfa8279a946c7486602
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
By adding a CMake option() that is OFF by default.
Change-Id: Ic66cae5bb9739ae1db3e534f671cc1e9e4b09647
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The argument allows to ignore the condition for source files if they
are used in the Qt code without corresponding guards. The header files
of this kind usually have internal guards, that suppress the error
at the location where they are used, so AUTOGEN is skipped for these
header files to suppress the warnings from CMake. If file belongs to
a module, it will display AUTHOR_WARNING which should urge Qt
maintainers to guard the use of the source file properly.
Task-number: QTBUG-103196
Change-Id: I7b4c12031a5d19ff15868d4782c0d396ef7aed8c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This will enable all qt internal tools to be able to access files
on paths longer than 255 characters.
Two examples that were not working before: moc and windeployqt.
Fixes: QTBUG-109207
Change-Id: I93f9770f1d3c4f3f2cca4655e4bed89c95b9786b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In CMake versions older than 3.20 add_dependencies have no effect
when adding interface libraries. So need to add the '_lib_pri'
targets to ALL to make sure that the related rules executed.
Amends 190e58e1f4
Pick-to: 6.2 6.4
Fixes: QTBUG-109240
Fixes: QTBUG-109239
Change-Id: I7c565ce3bc15e549569317454c2f7caac823cf66
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In cross builds, we are not creating versioned links for qt tools. This
patch addresses that. I've changed the signature of the
`qt_internal_install_versioned_link` such that it can be used for
non-target as well, so in cross build the qmake or qtmake.bat can be
processed with the same function.
Fixes: QTBUG-109024
Change-Id: I246621c18325d084622ca92b422e815ed06f1381
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As far as I can tell nothing uses TYPE anymore.
[ChangeLog][QtCore][CMake] The deprecated TYPE option of the
qt_add_plugin() has been removed. You can specify the plugin
type using the PLUGIN_TYPE option instead.
Change-Id: I786fbc772a23ae0037d9a4cf68018e3af5cb061d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This adds a new platform named wasm-emscripten-64
which sets the build and link argument -MEMORY64
You may see this warning, please ignore at your own discretion:
em++: warning: -sMEMORY64 is still experimental. Many features may not work.
[-Wexperimental]
Fixes: QTBUG-104891
Change-Id: I8d3150d239ba72dbef5c2352e0171d6cfbe51b59
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
PPS_LIBRARY and PPS_INCLUDE_DIR cannot be empty at this point (otherwise
PPS_FOUND would be FALSE). But it's arguably good practice to puth paths
in quotes.
Task-number: QTBUG-108930
Pick-to: 6.4
Change-Id: I87128da50f37cd6aa1a66811261a05ceb8c3e790
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
After this change, private CMake scripts are mostly live in
`libexec/`, except the `qt-cmake` which will stay in `bin/`.
This doesn't affect the Windows configuration.
- `qt-cmake` stays in `bin/`
- `qt-configure-module` moves into `libexec/`
- `qt-cmake-private` moves into `libexec/`
- `qt-cmake-private-install.cmake` moves into `libexec/`
- `qt-cmake-standalone-test` moves into `libexec/`
- `qt-internal-configure-test` moves into `libexec/`
In cases where `QT_GENERATE_WRAPPER_SCRIPTS_FOR_ALL_HOSTS` is set to
ON, e.g., ANDROID, WASM, both Batch and Bash files will be generated
and placed in `bin/` and `libexec/` accordingly; in both cases,
qt-cmake and qt-cmake.bat will be in `bin/` anyway.
[ChangeLog][CMake] The private Qt CMake scripts, i.e.,
qt-configure-module, qt-cmake-private, qt-cmake-private-install.cmake,
qt-cmake-standalone-test and qt-internal-configure-test were moved
into $prefix/libexec on Unix platforms.
Fixes: QTBUG-107621
Change-Id: Ic4f4ec85f64d2ede0e208bca928959e30be906a6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
pcre2-16 is not the target name provided by the upstream Config file. It is PCRE2::16BIT.
2410fbe386/cmake/pcre2-config.cmake.in (L122)
Pick-to: 6.2 6.4
Change-Id: I89f167e11bf1c72c9fae474ddd12380636ac5df8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When we use MSVC to build static libraries, enabling LTCG will
generate very large output, for example, Qt's bundled 3rd party
libraries can be greater than 100MB per file (some of them even >200MB!).
This is not good if we are building a shared version of Qt and
enabling LTCG at the same time. On Windows Qt's bundled 3rd party
dependencies will be built as static libraries and they will make
the final Qt package way too large. From my side, if I only build
a release version, the package size is usually around 500MB but
when LTCG is enabled, it become over 2GB. The exe and dlls' size
don't vary much, but there are many large static libraries.
Fixes: QTBUG-108719
Change-Id: Ic521f500b9c24389524e96a8cdc2e7b3427b51a9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Introduce the variable QT_SKIP_SETUP_DEPLOYMENT to turn off the
generation of deployment support files. Set this variable when building
Qt - but only if we're not building examples.
This avoids a warning about missing patchelf when building Qt with CMake
< 3.21.
Change-Id: I8ff5491eb314ff870c210884fbf90dd4c9ad0219
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
An MSVC debug-and-release build of Qt with the MySQL plugin requires
separate builds of the MySQL client library: a debug and a release
build. There was no way to specify the debug version of the library.
Now, it's possible to configure Qt like this:
cmake ... \
-DMySQL_ROOT=D:\mysql-connector-c-6.1.11-winx64 \
-DMySQL_LIBRARY_DIR=D:\mysql-connector-c-6.1.11-winx64\lib\vs14
This will automatically detect the include dir and the debug and release
library files. We expect that the debug build of the MySQL client
library resides in a "debug" subdirectory below MySQL_LIBRARY_DIR.
If the automatic detection doesn't work to due a different layout on the
build machine, one can set the variable MySQL_LIBRARY_DEBUG to specify
the debug variant of the MySQL client library.
[ChangeLog][CMake] If pkg-config is not used, a debug build of the MySQL
client library can be specified with
-DMySQL_LIBRARY_DEBUG=<path-to-library>. The debug and release variants
of the library are automatically detected. Setting MySQL_ROOT and
MySQL_LIBRARY_DIR is sufficient in most cases.
Pick-to: 6.2 6.4
Task-number: QTQAINFRA-4999
Change-Id: I663fb8ac1dbd07bc73484791be9cc21bff2f4a9b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This is done to avoid cmake syntax errors when adding new tests.
Change-Id: I8106b13a865b990c52e09573488881bd18e64c7f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It looks like these targets used to manage some custom commands that
belong to HEADER_MODULES. We don't currently have a need to use them,
so we clean up the code.
Change-Id: I8095f4de2c91a6c310cccb9b89514c2ce77e32f0
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There is no reason for adding dependency to the custom
'_pri_dep_timestamp' target instead of the INTERFACE_LIBRARY target
itself. This will close the chains of dependency between repo targets
and the HEADER_MODULE dependencies.
Pick-to: 6.4 6.2
Fixes: QTBUG-108815
Change-Id: I0e170d3e0e42d342881beb8aca1cc5a764425826
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Building repo targets may be incomplete as we skip adding
INTERFACE_LIBRARIES as dependencies. This leads to the missing
artifacts belonging to HEADER_MODULES. It seems reasonable and safe to
include INTERFACE_LIBRARIES in the list of dependencies of the repo targets.
Pick-to: 6.4 6.2
Task-number: QTBUG-108815
Change-Id: I83f44018f42dcf2fb1e3299461e17ef53e79c2e5
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Add the '-mimetype-database-compression' command line argument that
allows to select the preferred compression type for the mime type
database, including 'none' compression type, which avoids mime type
database compression even if respective compression APIs are present
in the system. The argument has the CMake alias called
'INPUT_mimetype_database_compression'.
Change-Id: I66daddae7014d109fa175a5f397e984928f4ee47
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In the case of re-doing, `configure` and `configure.bat` pass an extra
parameter to the `QtProcessConfigureArgs.cmake`. As a result, CMake
removes CMakeCache.txt and CMakeFiles/ before the reconfiguration. If
the user is using CMake 3.24 or newer, this is achieved by passing
the `--fresh` option to CMake call. In older CMake(s), CMakeCache.txt
and CMakeFiles/ found in CMAKE_BINARY_DIR will be removed using a
file(REMOVE_RECURSIVE call.
[ChangeLog] The -redo option now additionally removes existing
CMakeCache.txt file, and CMakeFiles/ directory, and recreates them from
scratch.
Task-number: QTBUG-108287
Change-Id: I11a5c8f9df1247d11eb7097552e6764463583346
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
macOS Catalina (10.15) has reached its end-of-life, and is no longer
supported with bug fixes or security updates by Apple.
Change-Id: I65d0f572785bc77a563be925cf64823c20b9e015
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
If I'm right, it seems that the work has already been done, and nothing
uses the `_qt_internal_wrap_tool_command` anymore.
Change-Id: Ib8a5951e8351a26df123045bb5c6001470650b38
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Instead of constantly trying to find packages by calling
qt_find_package on each reconfiguration, record which packages were
found during initial configuration. Then on a second reconfiguration,
skip looking for packages that were not found on the initial
configuration.
This speeds up reconfiguration on certain platforms and repos.
Here are some stats for my macOS qtbase build.
not skip 3.69s user 4.96s system 98% cpu 8.750 total
skip 2.69s user 1.00s system 97% cpu 3.792 total
Top-level build with -submodules=qtquick3d
not skip 15.03s user 10.58s system 97% cpu 26.334 total
skip 13.87s user 5.16s system 96% cpu 19.724 total
Note this is a behavior change from how find_package is used in most
CMake projects, where if a package was previously missing, the
developer can just install the package and reconfigure to pick it up.
With this change, they will first have to remove their CMakeCache.txt
file and configure from scratch, or remove the
QT_INTERNAL_PREVIOUSLY_FOUND_PACKAGES cache variable and reconfigure.
For this reason, we enable this behavior by default only in
-developer-builds.
Builders can also opt in or out by setting the
QT_INTERNAL_SAVE_PREVIOUSLY_FOUND_PACKAGES variable to either ON or
OFF.
Note this behavior does not apply to user projects, or direct
find_package calls (as opposed to qt_find_package).
Fixes: QTBUG-107251
Change-Id: Iee9c5d120eb09e2a94eebb059a2174ef6b241e03
Reviewed-by: Kai Köhne <kai.koehne@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Avoid using perl in CMake scripts. Remove the syncqt.pl specific
code.
Task-number: QTBUG-87480
Change-Id: I7fcd5cc83d173ec463c275b5b50b84f25044a118
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
So other modules can see it when they're built outside of qt5.git.
Change-Id: I76216ced393445a4ae2dfffd172a52168a2a55b4
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
This allows one to add an extra set of directories to the build, but let
the compiler know that they are system paths (that is, the compiler
should refrain from emitting warnings in code found there). This extends
INCLUDE_DIRECTORIES and is by necessity a private include set.
Will be used by qtquick3dphysics, due to its PhysX dependency.
Change-Id: I76216ced393445a4ae2dfffd1729c556db0cce3d
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
I keep getting this warning because docker-compose is not installed.
Change-Id: Id8e48e8f498c4a029619fffd172932bd86ed03ba
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
When calling file (RELATIVE_PATH), check if the base directory and
header path are absolute. Use the original file path if the paths are
relative to avoid critical errors.
Fixes: QTBUG-108617
Change-Id: I6daddd5c1553cdbfd965650b7c469673c62f0a3d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
If I understood the function correctly, then the example was not quite
right.
Change-Id: I6b6a4845c5ded2a058050dfbecf5db158d32d12a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Since a good number of tests use exec and friends, we want to use
asyncify for them. Asyncify is still possible to enable universally
with device options.
Change-Id: I0916f55328c98f2ba179cda3757eeee9d27f3e47
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Batched tests is the default supported test mode of wasm and should
be enabled without explicitly passing a command line argument.
Change-Id: I79424384e4e8ca6f670de1cb056f4713740a584f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Fix the syncqt issue when two modules are created in the same
CMakeLists.txt and share the build directory. In this case the
second module in the dependency chain rewrites
'module_headers[_generated]' files, so syncqt is not able to
proccess these files correctly.
Amends b89d63515b
Task-number: QTBUG-87480
Change-Id: Ibdcb66e96bdaabadc1c51611f5ed4a637d2f797f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When submitting applications to the iOS and macOS AppStore the
application goes through static analysis, which will trigger on
uses of various privacy protected APIs, unless the application
has a corresponding usage description for the permission in the
Info.plist file. This applies even if the application never
requests the given permission, but just links to a Qt library
that has the offending symbols or library dependencies.
To ensure that the application does not have to add usage
descriptions to their Info.plist for permissions they never
plan to use we split up the various permission implementations
into small static libraries that register with the Qt plugin
mechanism as permission backends. We can then inspect the
application's Info.plist at configure time and only add the
relevant static permission libraries.
Furthermore, since some permissions can be checked without any
usage description, we allow the implementation to be split up
into two separate translation units. By putting the request in
its own translation unit we can selectively include it during
linking by telling the linker to look for a special symbol.
This is useful for libraries such as Qt Multimedia who would
like to check the current permission status, but without
needing to request any permission of its own.
Done-with: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Change-Id: Ic2a43e1a0c45a91df6101020639f473ffd9454cc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add support for enabling -fwasm-exceptions at compile and
link time, which enables use of C++ exceptions.
Wasm-exceptions is an in-progress roadmap item (see
https://webassembly.org/roadmap/), but is supported
by the major browsers
Change-Id: I6e2847206a46ed8038320c99725bc09a0344d1b4
Reviewed-by: Aleksandr Reviakin <aleksandr.reviakin@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
When creating the syncqt custom target we only check if the
WARNINGS_ARE_ERRORS variable is set. But the warnings-are-errors
feature can be disabled using the QT_SKIP_WARNINGS_ARE_ERRORS
target property. Add the genex condition to opt out the
'-warningsAreErrors' argument using the QT_SKIP_WARNINGS_ARE_ERRORS
property.
Change-Id: I8e6f89453500335c2b31e6e69c65b351c79dddc2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When configuring a qtbase developer build, WARNINGS_ARE_ERRORS is
set to ON and -Werror flags are added to the PlatformInternal
targets. But the value of WARNINGS_ARE_ERRORS is not exported.
This means that CMake code can't make decisions based on that variable
when building other repos, and we now have such code with the new
syncqt.cpp in qt_internal_target_sync_headers.
Export the value of WARNINGS_ARE_ERRORS in
QtBuildInternalsExtra.cmake.in.
Fixes: QTBUG-108151
Change-Id: I5de2633fcb1f20fead7d436c201852424e726842
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Process the regular SOURCES and DBus sources the same way in
the qt_internal_extend_target call. Previously the specified
COMPILE_FLAGS had no effect on DBus sources.
[ChangeLog][General] The internal DBus source files that are
generated, now are compiled with the same set of compilation
flags and options as other source files of the Qt module.
Change-Id: I9bdeb8f45c6af1b0cb0235425b0ff7efcb952d59
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Extract function arguments to the corresponding variables and use
variables when parsing arguments. Remove whitespace between if keyword
and parentheses. Adjust size of code lines. Document function-specific
arguments.
Change-Id: I1c77fbf268618a844726683768575aff05894c70
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is a level A SIC, as it breaks
QFile f = "/some/path";
In general, it's not a good idea to have this implicit conversion. A
QFile is not a representation of a path, so the conversion should be
explicit.
I am going to keep the current semantics (implicit conversion) up to and
including Qt 6.8 (LTS). Starting from 6.9, the constructor will be
unconditionally explicit. This is deliberate, and done in order to make
users fix their code while staying in Qt 6, rather than encountering
this issue (and countless many more) if and when they upgrade from Qt 6
to Qt 7. In the meanwhile, users can opt-in to the new semantics by
defining a macro.
[ChangeLog][QtCore][QFile] The QFile constructors that take a path are
going to become unconditionally `explicit` in Qt 6.9. Code like `QFile f
= "/path";` will need to be ported to equivalent one (e.g. `QFile
f{"/path/"}`). This has been done in order to prevent a category of
mistakes when passing strings or paths to functions that actually take a
QFile. Users can opt-in to this change even before Qt 6.9 by defining
the QT_EXPLICIT_QFILE_CONSTRUCTION_FROM_PATH macro before including any
Qt header.
Change-Id: I065a09b9ce5d24c352664df0d48776545f6a0d8e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It might not matter as far as I understand, but having it saved as BOOL
is better if it's a boolean.
Change-Id: If35485425257ca5518f0f8a49ca5353b9ac875a8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
FindWrapSystemMd4c now uses `find_package_handle_standard_args` like
all the other similar modules. This also fixes a case where CMake config
log for finding `md4c` was missing the CMAKE_MESSAGE_CONTEXT,
e.g., `[QtBase]`, which was caused by using `find_package` and let it
log outside the scope of the project, and not `QUIET`ing it.
In addition, the `CONFIG` parameter of the `find_package` was removed to
avoid unexpected issues when 3rd party package managers were used.
Change-Id: Id0bee436e8965452f9089c0e8c8793c3f1b63f02
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some modules may have header files that do not pass headersclean check
under some conditions. It's nice to have an option in the
qt_internal_add_module function to disable the check for the modules of
this kind. At the moment this flag is useful for the ActiveQt module,
since it syncs and installs header files that don't belong to it.
Amends b89d63515b
Task-number: QTBUG-103196
Change-Id: I21a82d50d50bdac225ed483ab0cc50339c2a4873
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since QtAutoDetect is called before the project, we still don't have
access to our IOS, WATCHOS, TVOS variables, and we must use
CMAKE_SYSTEM_NAME variable instead.
Pick-to: 6.4
Change-Id: I61afe216baec85b3fcd489957f4b6774134f8078
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In addition, I simplified some of the routines as we don't need the
extra check for them.
Task-number: QTBUG-107903
Pick-to: 6.4
Change-Id: Idaf6ab1338a54bc1a9f242fcc8400ae200174beb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Each module now identifies its actions during the configuration by a
prefix, e.g., `[QtBase]`. In addition,
- I have slightly modified some of the `message()` commands to get
a more coherent output.
- `syncqt.cpp` prints its output as WARNING if any
Change-Id: I3922d75a668d94f402068f4121751b7fcb6522b4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
From CMake 3.7 both flavors of `cmake_parse_arguments` are natively
available in CMake, and loading the
`CMakeParseArguments` module is not needed anymore.
Fixes: QTBUG-107574
Pick-to: 6.4
Change-Id: I7c8a6c5871cdb2f92a4aa43932b6f2ee99e1f57f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
As stated in `QtBuildInternalsConfig.cmake`, `cmake_minimum_required`
versions should be synced with `qtbase/.cmake.conf`, but it wasn't at
the moment.
Change-Id: I8100370778707d46abe973b681fd4aba182a7513
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
