When QTextLayout is used in a QTextDocument, many code paths use
special caches and thus greatly outperform the raw QTextLayout version
that operates directly on a QString.
This patch brings some of these optimizations also to the raw version.
We now also use a QFormatCollection in such cases and enable the
functionality of QTextEngine::indexAdditionalFormats() and
QTextEngine::resolveAdditionalFormats(). Thanks to that, we can greatly
speed up QTextEngine::format(), which now uses an amort O(1) hash table
lookup instead of a O(N) linear search.
The added benchmark shows a gain in the order of one magnitude:
./tst_bench_QText formattedLayout:long-many
before applying the patch:
378.19 msecs per iteration (total: 37,820, iterations: 100)
after applying the patch:
25.80 msecs per iteration (total: 2,580, iterations: 100)
Note: This change is source-incompatible for applications using the private
QTextEngine API.
Task-number: QTBUG-8389
Change-Id: Ifcf7a8902a394428979ea06a6d955f886ee739c7
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Otherwise the containers might be forward declared in the moc file,
and when the moc file is compiled in a standalone translation unit,
the full definition of it would not be available. This results in
odd compile errors, so instead generate the includes if required.
Change-Id: Ie01c5a5d45314daad0b00dec03b3e1e18cdbae64
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: Ie395d82d17710683968d006d22de313ef49dc6e5
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This overload avoids the needless heap allocation that the traditional
overload incurs due to the implicit QChar -> QString conversion
involved there.
In order to share the implementation between the two overloads,
QStringList_join now takes the separator as a (Char*,int) tuple
instead of as a QString.
Change-Id: I92961f13a3f19099de2a6e2df9f4789a12fc83a0
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fills the gap left by QWidgetStar, making the sequence
between FirstCoreType and LastCoreType contiguous, which some
benchmarks assume to be true anyway.
Change-Id: I2d5d202b6246a9065fdf77f325a4a04279dbe4b7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We can't have T& declared/registered as a metatype (wont compile), but
using it as type for a slot argument is possible. With the recent
introduction of metatype auto-registration we have to make sure that moc
doesn't attempt to auto-register those. Simple types are handled correctly
already, this fixes containers and smart pointers.
Change-Id: Id96857c57d6ebf158a67e9d527c89dc195473b1b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QStyle::standardIconImplementation() & layoutSpacingImplementation()
are removed, and standardIcon() & layoutSpacing() made pure virtual.
Change-Id: If8ab6cfef0b639b7973be22dd630ba3e6f39a225
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
The test has one unstable failure on Windows, so mark this with QEXPECT_FAIL
Task-number: QTBUG-26906
Change-Id: I2f6c63ddefecacd224d93f83e6951e961a02a051
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When calculating the maximum height / width which a QGraphicsView can display,
make sure we only take the scrollbars' dimensions into account if their policy
is set to Qt::ScrollBarAsNeeded:
- if the policy is set to Qt::ScrollBarAlwaysOff, the scrollbar will not be
displayed at all
- if the policy is set to Qt::ScrollBarAlwaysOn, the scrollbar's dimensions
have already been substracted from the available space by
QAbstractScrollArea::maximumViewportSize()
Task-number: QTBUG-14711
Change-Id: If5d24b41dbe7b089abca2bf61ccbd370d4de79a1
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Try to find a target widget that accepts drops; ignore the event
if none can be found. Split the handleDrag*() functions
to reduce indentation.
Add an autotest.
Task-number: QTBUG-22987
Change-Id: I516ac5f0c002caaf83c52ac16f821246e565230f
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Doing element-wise insertions for the full range of the test made
testing under valgrind extremely slow. When a reallocation is detected
we now resize() the container close to capacity(), while verifying this
doesn't unnecessarily re-allocate either.
Change-Id: Idf7015cf390e366fe444e7ca14c904a2d54ff48b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Follow-up to 83c9ebbd66.
Consider the case where calls to the reset methods on the same object
are nested as in the following sequence:
1. beginResetModel()
2. beginResetModel()
3. endResetModel()
4. endResetModel()
In such cases, only the outermost calls, i.e., 1) and 4), should emit
signals.
After 83c9ebbd66, 1) and 3) emitted the
signals, which is wrong. This is corrected by keeping track of the
nesting level.
Such sequences can come about when a base class calls the begin/end
methods between the calls made by the subclass.
QSqlTableModel::select() is an example of this.
Test included.
Change-Id: Ia62b45cb1abaab00a32bb8357de4a958bcff83e5
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
After setting the printer name the initialization is no longer done for
a printer with a name. Instead doReinit() method is called to preserve
the orientation (set with setOrientation() method before calling
setPrinterName()). Before the orientation was changed back to default
when setPrinterName() method was called ignoring the orientation set.
Updated also the autotest because the case:
taskQTBUG4497_reusePrinterOnDifferentFiles() is no longer expected to
fail on Windows.
Task-number: QTBUG-26008
Change-Id: Ia6bc9ae14d79a646e61bfc97652f9f5af90738b3
Reviewed-by: Andy Shaw
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Both insert and replace have this overload, so one reason to add it
to append(), too, is consistency. But I can also make good use of
this overload in the the new QStringList::join(QChar) overload, so
it's actually useful in its own right.
Change-Id: Iccd48f9cb84831399e4db7e3e78eba25c0ced30d
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If you had a QTreeView with expandable items, if you tried to expand and while
the animation was still running you'd try to collpase the node,
the display would be completely broken: the items below that items would
not be visible any more except for a fraction of a second when expanding
or collapsing it again.
The problem is in the fact that when starting an animation the QTreeView
stores the state before animating. And it does that even if an animation
is already running. So the stateBeforeAnimation becomes AnimatingState and
when the animation finishes, AnimatingState is the state that is restored
breaking the painting.
Unit test is included.
Change-Id: I015212c1ed8962e6df705655099a5660f195caf3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Previously QImage::fill() for Format_RGB888 expected a BGR value
instead of the RGB order defined by QRgb, making it counter intuitive to
use related to the 32-bit formats.
Fixed the QPixelLayout data for RGB888 and changed the byte order of
quint24 based on what the optimized image conversion routines expect.
Change-Id: I72926debbc6f5b5cb10b8aa0b2a2a916a04db946
Reviewed-by: Kim M. Kalland <kim.kalland@nokia.com>
When a parent item had its visiblity toggled, then the child item would
not update if the parent item had ItemHasNoContents and
ItemClipsChildrenToShape set. This is a common use case in declarative as
the root item has ItemHasNoContents set.
Task-number: QTBUG-26846
Change-Id: Id6592ebc4ba2caa4331a4a71f7247e40993131b6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Add SslProtocol enums TlsV1_1 and TlsV1_2 and use the appropriate OpenSSL
methods when they're selected (TLSv1_1_client_method, TLSv1_2_client_method,
TLSv1_1_server_method and TLSv1_2_server_method). This allows us to
explicitly use TLS 1.1 or 1.2.
Task-number: QTBUG-26866
Change-Id: I159da548546fa746c20e9e96bc0e5b785e4e761b
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This function only makes sense on a developer build. In non
developer-builds you get:
tst_qtextboundaryfinder.cpp:116:13:
warning: ‘void generateDataFromFile(const QString&)’
defined but not used [-Wunused-function]
Change-Id: Id1bda2d27b00048f7401606959b566a59c05b38d
Reviewed-by: Toby Tomkins <tjtomkins@gmail.com>
If setQObjectShared crashes because a QObject is tracked by two
different QSharedPointers, we lose the debug feature offered by #defining
QT_SHAREDPOINTER_TRACK_POINTERS, as the check done by this define
happens after the setQObjectShared call.
Therefore, move setQObjectShared after the internalSafetyCheckAdd call.
This is actually a noop change in 5.0, as setQObjectShared does nothing.
However it prevents a bug in case the Qt 4 behaviour is brought back
in some later version.
Change-Id: I71340d0f878828354537762d01c46d441efc918c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This works similarly to the automatic registration for Q_PROPERTY types,
but in this case it mostly affects the need for users to
call qRegisterMetaType<T>() before using queued connections
with methods using non-built-in metatypes, or before using invokeMethod
manually.
Change-Id: Ib17d0606b77b0130624b6a88b57c36d26e97d12d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
In Qt 4, the user needs to call qRegisterMetaType if the property
could otherwise be read before the type is registered with the metatype
system. This patch makes that unnecessary and automatic by registering
it when the first read indicates that it is not yet registered instead
or when QMetaProperty::userType is called before it is registered.
The types which are automatically registered exclude the built-in
types, which do not need to be registered, and include metatypes which
are automatically declared, such as pointers to QObject derived types
and containers of existing metatypes.
Change-Id: I0a06d8efdcb64121618e2378366d0142fa0771f5
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
In Qt 5, when streaming an invalid QDate using a QDataStream version
earlier than Qt_5_0, QDate.jd is written and read as 0, which is an
invalid julian day for Qt versions earlier than 5.0. For Qt 5.0
however, 0 is a valid julian day, so when comparing a deserialised
invalid date (read using a QDataStream version < Qt_5_0) against a
default-constructed invalid date, they won't compare equal when they
should.
Task-number: QTBUG-26989
Change-Id: Ia76df493471f3b068c7d7187be20e3178eff2cc7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change d060b6f04f introduced some
new properties to QTextFormat which were unfinished and did not
match the documentation in the same change. I've updated the API
and docs to use the regular QFont enum for letter spacing type
instead of introducing bools (which inhibits expansions later)
or mutually exclusive properties in the text format.
Change-Id: Ife44993b6746c413e421fdaf92ebaaab6ba95977
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The Qt::KeypadModifier modifier is internally masked away from all
shortcuts. So it is not possible to set a keypad only shortcut.
Changed the implementation so that first a full keysequence match is
searched. Then if no match is found the same sequence is tried
without the keypad modifer.
Added a autotest for this also to cover the basic use cases relating
to this.
Task-number: QTBUG-20191
Change-Id: Ibe7740c705fd0ab1eece4809b9a0b48882172933
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
While writing the test, I found that moc doesn't yet support
volatile slots. I left the tests in, commented, for a time
when it does.
Change-Id: Ib5fa00b25600618aedcc66739630054f3c879b99
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This only works with the C++11 contextual keyword
directly, the MSVC equivalent 'sealed', or the Qt
define for it.
While this isn't a problem for syncqt, being an
internal tool, moc should eventually be able to parse
user code using local C++11-final-wrapping macros.
For this, I guess moc would have to be taught to
expand macros in code and not just test #if clauses,
potentially driven by something like
#pragma qt-moc expand-this
#define MY_FINAL_CLASS final
but that's something for someone more intimately
familiar with moc's source than I am.
Change-Id: Id6aec961a881e8d5a9b76a7fc8e1c02c71913f64
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This detected the same missing detach()s in QUrl::resolve.
Everything else works, no need for a mutex in Qt5's QUrl.
Change-Id: I0da51b7b0c6b810d314a26d4b638383cd17de12b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTextEdit showing long lines using lots of text format (for example
with a syntax highlighter) used to expose a quadratic behaviour which
make it impossible to edit files with long lines.
It was fiexed in the few previous commit
Task-number: QTBUG-8389
Change-Id: Ib7203497a7699a85ae1dfb70fe65d5fb36884b58
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Just to make it clear which two sections go together.
Change-Id: If3724d1c84172a61bdd7931cc567f4b7140d4f8a
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Introduced during Qt5 development and renamed to QInputMethod.
Change-Id: If6744648dc98b779e65c449ae32626db574181df
Reviewed-by: Joona Petrell <joona.petrell@gmail.com>
availableMibs() unconditionally adds 2107 to the list of mibs. The patch
ensures that codecForMib() also knows about this special TSCII codec.
(Note that the autotest only really checks this code path if only this
test case is run. The other tests already fill the internal codec cache
otherwise).
Change-Id: Id987d7cecd5f5700cca75e9b85b37011f8e5c622
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
@p replaced by \a, \QD replaced by {Qt Designer}, couple of enums etc.
Change-Id: I315510690bf52e42db519292b4122fa24c73bbc9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Task-number: QTBUG-26540
Change-Id: I1c365aeb013f5ddedd0589aa4c4844be759a3882
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
They used to always return indexes in column 0.
Change-Id: I2cf4239e0a975b37548de00a1deb916fcd88b4c7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Commit 7808ec79 changes QApplication to synthesize
mouse events from (unhandled) touch events.
On Mac OS X this creates a conflict for two-finger
scroll swipes, which generates both touch events and
mouse wheel events: scrolling in QTextEdit will also
select the text.
Add a SynthesizeMouseFromTouchEvents platform style
hint that enables the event synthesising. Set to true
by default and false in Cocoa.
Change-Id: I1ffa5a141476aa38b81ce92a87eff676c7ec2276
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The current implementation of qIsNull only returns true if the value is
positive zero. This behaviour is not useful for use cases like
QPointF::isNull, where QPointF(-0, -0).isNull() will return false.
There doesn't seem to be a reason why the function exhibits this
behaviour (-0.0 is not accounted for in the unit tests), and for the
case of QSizeF::scale it causes a bug: qIsNull is used to check for
division by 0.0 before it proceeds, which fails in the case of -0.0.
Task-number: QTBUG-7303
Change-Id: I767e5280bd26614e8e78ae62b274eb9bc4ade385
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Size constraints set on a widget before the creation of
the QWidgetWindow were lost (for example, Qt Creator's
preference page).
Task-number: QTBUG-26745
Change-Id: I7c2f5aed9c8817795603e5ad3c24418d66627bab
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: hjk <qthjk@ovi.com>
"The documentation states that "secsTo() does not take into account any
milliseconds", however, this is not the case. Given times 12:30:01.500
and 12:30:02.400 secsTo returns 0. If milliseconds are not taken into
account, I would expect this to return 1 (i.e. interprets the times as
12:30:01 and 12:30:02 thus truncating the milliseconds)."
Note that tests were also written for QDateTime::secsTo(), as it uses
QTime::secsTo internally. This addresses Javier's issue in the
comments of QTBUG-9304.
Task-number: QTBUG-9304
Change-Id: I9efe0c8f710db859c1d086d67ba3e5b349a56c4e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime currently serialises its private Spec enum. If a user was to
deserialise the individual components of a QDateTime separately, the
resulting timeSpec may be invalid when cast to the Qt::TimeSpec enum.
E.g.:
QDateTime dateTime(QDate(2012, 8, 14), QTime(8, 0, 0), Qt::UTC);
// ... serialise
// ... deserialise date, time, spec separately.
// spec == 2, the value of QDateTimePrivate::UTC.
// spec != UTC, will be set to LocalUnknown.
QDateTime deserialised(date, time, spec);
This patch serialises QDateTime objects in UTC and the value of
timeSpec() as opposed to QDateTimePrivate's spec. This changes the
serialisation behaviour of QDateTime for version 13 of QDataStream.
Task-number: QTBUG-4057
Change-Id: If650e7960dca7b6ab44b8233410a6369c41df73a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The asymmetry is intentional: the getters can use toLatin1() because the
called functions, with a QUrl::FullyEncoded parameter, return ASCII
only. This gives a small performance improvement over the need to run
the UTF-8 encoder.
However, the data passed to setters could contain non-ASCII binary data,
in addition to the percent-encoded data. We can't use fromUtf8 because
it's binary and we can't use toPercentEncoded because it already encoded.
Change-Id: I5ecdb49be5af51ac86fd9764eb3a6aa96385f512
Reviewed-by: David Faure <faure@kde.org>
Just in case someone (like me) changes the function signatures or adds
new functions.
Change-Id: I1025fea012d95ffe89acaf799aa58fd2b0babc80
Reviewed-by: David Faure <faure@kde.org>
QDateTime will attempt to convert unknown types of date to UTC time, which isn't
exactly a fast process. As we don't care about local timezones in the process of
sorting (as this is purely for ordering, not display to the end user), we can
force the dates to use UTC time, avoiding the unnecessary local timezone lookup.
This also adds a benchmark covering this case.
Benchmark results, Qt 5:
- before: 11, 489ms
- after: 273ms
Qt 4.8:
- before: 20, 848ms
- after: 278ms
Change-Id: I87fa6260e820b5b172d3306ff395dafe767c33ff
Reported-by: Thomas Perl <m@thp.io>
Reviewed-by: Alberto Mardegan <mardy@users.sourceforge.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Windows CE does not have support for GetGlyphOutline.
So addGlyphToPath will not work. QML uses it for their
distance field rendering. One option to bypass this issue
is to use freetype as rendering backend.
Change-Id: I965254344945cbdad771a5d505fb61c1cc2087df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Task-number: QTBUG-21804
Change-Id: I475166f3f60b1278089baa255ace4e18baeb568e
Reviewed-by: Jani Honkonen <jani.honkonen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When a stylesheet was set on a parent widget then in some cases it would
not get applied to all the child widgets. This was because the order of
the children list may have been modified while it was being set on
children. By making a copy of the list we prevent this from being a
problem.
Task-number: QTBUG-26321
Change-Id: Iea6bf72c69a0c39746f7ef5e7893dda5a93ed7e5
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The listitem width was calculated incorrectly because spacing was
not considered. This fixes the second part of the reported bug where
spacing is set. Added some tests to catch the issue relating to the
reported bug.
Also added a test to check spacing in general.
Task-number: QTBUG-21804
Change-Id: Icc6326bce914264d882a60a9fc0ebe7d2a08dbf6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
If the selected item is scrolled with keyboard keys the selected item
will go outside the visible area. The scrolling did not take hidden
items into account when calculating the amount to be scrolled.
Task-number: QTBUG-21804
Change-Id: I63da0248cec43be464898f9dc8167e739f00ccd0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Those are regular, integer types, of 16- and 32-bit width,
respectively. C++11's std::atomic supports them, so we should too.
C++11 also supports wchar_t, but since that type's size can change, I
don't feel like support for it in Qt is pressing.
Change-Id: I945b641c91a8a98be82715f878c382dee58ac98b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This allows one to write code that depends on these values at
compile-time.
Change-Id: I7d78524ed9c70d4141360496d1d764dcbfa92e62
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fix for this failing test is not yet agreed to. Disable it to
allow progress with the CI system while the fix is decided.
Task-number: QTBUG-26869
Change-Id: Ia8089b8e66d750353e7c1c69597916af0d042856
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This allows us to remove the odd hacks to get the static metaobject
for the QWidget* metatype.
The QWidget* is still an automatic metatype thanks to the QObject
partial template specialization. It is registered as a metatype
at runtime automatically in qwidgetsvariant.cpp.
Change-Id: Ie01b69eadf2cbe87af1a86c3284550f60dcf9e94
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is necessary whenever QPersistentModelIndexes are changed. Omitting
it means that views are not able to react to the change, such as QTreeView
clearing its (manually held) QModelIndex cache, and the QItemSelectionModel
clearing the item from its storage.
It is necessary to change a QSortFilterProxyModel test which assumed setItem
does not have any such effect. That test is ported to setData instead.
Task-number: QTBUG-18539
Change-Id: Id7a602f18b9773ba4d11019418de886860d26d3e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
qUncompressCorruptedData() no longer hangs on QNX 650 and Blackberry OS
sytems.
Change-Id: Id131f9f1c6dcd358c152675c7e29ab937052c1d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Modeltest asserts before the patch, and passes afterward.
Task-number: QTBUG-26515
Change-Id: I08a89cd5c9c59613badcddbd056a3d0b8fbbca13
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
GCC 4.8 warns:
main.cpp:165:60: warning: ‘type’ may be used uninitialized in this function [-Wmaybe-uninitialized]
app.arguments().at(3).toInt());
^
Change-Id: Ib0f6847031437b588e14c6708fdddea5fd474b58
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The bug is that the connection to emit that signal can be made
obsolete if the connection is made too early and the model is replaced.
In the bug report, the connection is made by calling view() early (thereby
causing the creation of a view and a QItemSelectionModel which operates on
the built-in QItemSelectionModel, and then connecting to that
QItemSelectionModel), and then when QComboBox::setModel() is called later
the built-in view creates a new QItemSelectionModel for it. The bug was
that that new QItemSelectionModel is not connected to. This patch fixes that
bug.
Task-number: QTBUG-4454
Change-Id: Ibbdb8731f16ab071008b4a19dc2cc7ae03cebc84
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There are some security issues with undo/redo. User should not be
able to get the erased password back in any situation. Therefore
redo must be disabled completely and undo is limited only for erasing
previously entered text.
Task-number: QTBUG-14226
Change-Id: I2b38aca84adbad1c14db76b56ad6303d56b35b4d
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-26687
Change-Id: Iaa0197efe64c61505e22e4a63a1f5c012af0bc78
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
GCC 4.8 warns:
src/testlib/qtestmouse.h:219:67: warning: ‘popupMenu’ may be used uninitialized in this function [-Wmaybe-uninitialized]
{ mouseEvent(MouseClick, widget, button, stateKey, pos, delay); }
tests/auto/widgets/widgets/qtoolbar/tst_qtoolbar.cpp:862:12: note: ‘popupMenu’ was declared here
Change-Id: I19cfd1790fbd948e97bf740d4412ccf3bb98a330
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
A new class called QAccessibleTextWidget was added.
This class should implement all methods of QAccessibleTextInterface and
QAccessibleEditableTextInterface which only need a QTextCursor, and it
defines two pure virtual methods, to obtain and set the text cursor, so
accessible implementations of widgets which use a text cursor can implement
these two methods.
QAccessibleTextEdit is now a subclass of QAccessibleTextWidget and most of
its methods were moved to QAccessibleTextWidget.
This is a forward port of ba5d7d608cc31fc63354fd74d85a1bad7780fc45 from
Qt 4.8, and is a prerequisite for forward-porting QPlainTextEdit
Change-Id: I6093c4fa7e0a77b84de779479c6074db006efec1
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This is a plugin that bridges the QAccessible world
to AT-SPI 2 on Linux.
Change-Id: I7af22621ee6a3cefc723b137b7f227a611cf6641
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
This test is doing a brute-force mapping. Coupled with changes to
QCOMPARE last year, this now allocates and deallocates a lot of memory
per iteration. On my Sandybridge, it takes two minutes to run:
111136.781153 task-clock # 0.999 CPUs utilized
371,692,633,238 cycles # 3.344 GHz
182,641,818,708 stalled-cycles-frontend # 49.14% frontend cycles idle
57,951,552,830 stalled-cycles-backend # 15.59% backend cycles idle
477,216,332,971 instructions # 1.28 insns per cycle
# 0.38 stalled cycles per insn
86,959,637,669 branches # 782.456 M/sec
309,185,237 branch-misses # 0.36% of all branches
111.264868818 seconds time elapsed
Changing the iteration step from 1 to 5 reduces the runtime to about 5
seconds.
Change-Id: I9cad6f85f535f472319da7cd6c4aa28e12ddf1b7
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These projects are expected to fail, but we need to make sure they fail
for the right reason.
Change-Id: I8a7caaa663060712c5c7113ef3b054feba2e2287
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
In the CI system, an environment variable is used to convey
the CMAKE_PREFIX_PATH, but that can not be relied upon.
Change-Id: Ie4fbacaac6ae18f95a3b4d1e796a4b4c91a418c4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test has recently timed out in CI, but appeared to be making
progress. Give it more time to complete.
Change-Id: Ied0fb7aad35ed6d5889dd585a7545687617e5e19
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Task-number: QTBUG-26793
Change-Id: Ic19cb6581cd5838d26713998e152772a5d12da4f
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The newer CMake version has the POSITION_INDEPENDENT_CODE property which is
what we need here. The CMake 2.8.8 implementation uses awkward and incomplete
string manipulation which I don't want to maintain for any amount of time
when Qt 5.0 is released.
Change-Id: If7ace9c6925ccdbf800f1863fa2368e55fa44d7f
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These functions are a faster version of {,!}qgetenv().is{Null,Empty}(),
a common pattern in Qt code.
Their main advantage is that they don't need to allocate memory, so
they can be used in noexcept functions, or dynamic initialisation of
namespace-scope statics, because throwing in these contexts invokes
std::terminate().
Change-Id: I651c5bd72f450b5d7df76590f8791572fe992af5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Library code might need to know this, e.g. when calling an external
process, to give it the right configuration. (For instance when
ksycoca code calls kbuildsycoca to recreate the DB at the right place).
Change-Id: I343ddefff816586f9d391973c08ff1e1ad86bf0e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
SRCDIR was not defined for WinCE but it should no longer be used.
Fixed test case to use QFINDTESTDATA instead.
Change-Id: I07cbf7d42790d33e2d205d1682ec10e7577a92bd
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Commit f9a17d7f0f fixed it for the case
where the sender object is in a different thread at transition setup
time. However, it still didn't work if either the sender object or the
state machine was moved to a different thread at some later time,
before the machine was started.
Therefore: Bite the sour grape and traverse all the machine's
transitions when the machine is being started, registering those
signal transitions whose sender objects are in other threads.
This will increase the machine's startup time (proportional to the
number of transitions), but at least it works in all known scenarios,
meaning we don't have to document weird restrictions regarding the
order in which the user's operations have to be done.
Task-number: QTBUG-19789
Change-Id: I5f1dd1321994e49635f52be65cf56d2678ed1253
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This is consistent with QAbstractButton, QCalendarWidget,
QDialogButtonBox and QGroupBox (ie, all other widgets with
a clicked signal)
Task-number: QTBUG-26105
Change-Id: Ieafe988b5c03216796b69a7cd70ac1a03fc12b0a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Previously, a QVariant parameter would be wrapped inside a new
QVariant, and you would have to cast the QSignalSpy's QVariant to
a QVariant to get the actual value. This behavior was unintuitive
and undocumented.
Check if the parameter type is QVariant, and copy it directly if it
is. This makes the QSignalSpy's QVariant directly usable (no need to
"unwrap" the value in user code).
Existing tests that use QSignalSpy together with QVariant parameters
(such as tst_QPropertyAnimation::valueChanged()) and do cast the
QVariant parameter to a QVariant, continue to work after this change;
this is because qvariant_cast<QVariant>() returns its input value
(unchanged) when the type is not QMetaType::QVariant.
Task-number: QTBUG-21645
Change-Id: Ibfb171edd60c0d3f7ca1d5419e5c5f3d0380d5b3
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Make the test behave in Jenkins similarly as it behaves in Pulse:
- a test run in Jenkins is not an ad-hoc run
- the JENKINS_HOME environment variable implies we are running in
Jenkins
- the GIT_BRANCH environment variable, set by the Jenkins git plugin,
is equivalent to PULSE_GIT_BRANCH
- there is no equivalent to PULSE_TESTR_BRANCH, since testr is no
longer used
Change-Id: I89ffeec659b4adaab309d8b93ad793ce640029c7
Reviewed-by: aavit <qt_aavit@ovi.com>
The argument has been obsoleted and not documented since 2007. Get rid
of it now before Qt 5.0
Task-number: QTBUG-25089
Change-Id: I91a5508a5e1606f5b5c289501295c67be4abe6a0
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Replace SRCDIR define by QFINDTESTDATA, simplify code.
- Introduce a test for stdout mode that verifies the newline
convention.
- Use a temporary directory as not to clobber the
test directory and introduce an environment variable
UIC_KEEP_GENERATED_FILES to keep them for error
analysis.
Task-number: QTBUG-26730
Change-Id: I22e3bb5a9ca92a1977c29b165ea605f1017baa02
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Add new qt_handleXXX functions that forward to the QWindowSystemInterface
functions, and use those in the testlib inline functions. Remove use of
struct QWindowSystemInterface::TouchPoint from the testlib header files
(requiring some slight increase in ugliness in the two tests that use
that struct).
Also remove the qmake hack that adds private headers to all tests
Change-Id: Iec23537e55a44802f6e9cd463f7a0f82007c5250
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
We need to handle FD_CLOSE separately on Windows as this will be sent
only once. When we get FD_CLOSE we need to check if there is more data
available for reading. It there is this might indicate that there is
another FD_READ that we need to handle after the FD_CLOSE. So in this
case we will manually create another close event.
Task-number: QTBUG-19409
Task-number: QTBUG-25386
Change-Id: Ie19906bc3f64fb6a85a508a5ab12caac5d70ccdb
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
