On macOS, even if pkg-config is present in the path, configure will by
default correctly ignore it and set no-pkg-config. However, this was not
propagated to qmake when invoked from config.test, so tests which rely on
that did not work.
This was leading to pkg-config (installed from homebrew) to be used in
the libpng test, so it succeeded. But the later Qt build would fail to
find png.h from homebrew, as it correctly ignores pkg-config.
Task-number: QTBUG-55011
Change-Id: Ic6fb866bea0551f528da56cb545174dcd9bacf0d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
On RHEL 6.6, mysql_config --libs returns "-rdynamic" among other arguments.
The configure test (config.tests/unix/mysql) would end up passing that
to qmake. qmake responds with "***Unknown option -rdynamic ..."
Change-Id: Ib1300e62aec8a5d866359f3eaea88d9648c872b9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
(cherry picked from commit d7e27e4d26)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
implement it in configure.exe and fix it in configure.sh.
Change-Id: I30764f4cba4bad0f23bfb40ce7a2ca614e1afd71
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
write them to the top-level build dir, not the qtbase build dir.
the old files will be still used for a smooth migration.
Task-number: QTBUG-46974
Change-Id: I6eae678ffc7dfb921ecd9e9012e79e3b915ad3fa
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
instead of saving the files away and restoring them afterwards, use the
new and shiny discard_from() function to throw away everything the files
might contain.
strictly speaking, this is not precise, as the pris may also use *=, -=,
and possibly other operations which cannot be trivially undone, but the
purpose is essentially to discard the special outputs of some features
which may affect subsequent tests, for which this is sufficient.
as a side effect, the failure to load qmodule.pri is not fatal any more
(like for qconfig.pri), to save the pointless effort of ensuring that it
exists.
Change-Id: I07625b60c4f2e27b21206b2c16d24ab111737395
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
"clang -v" on FreeBSD reports something like "FreeBSD clang version
x.y.z [...]" instead of just "clang version x.y.z [...]", which fails to
match the sed pattern in the configure script, resulting in qconfig.pri
having no clang version defined.
Augment the pattern so that both version strings match.
Change-Id: I5f38f8480f4b1156ca7147e32c1157a009557035
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
cleaner, and covers windows as well.
Change-Id: I0e884909a3f49610fab750ba1ef6112f43e5d5d1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
that is, save it to config.opt and recall it when -redo is used (and do
not write it again in this case).
a trivial config.status is still created, as having it is very
convenient when shadow-building.
Task-number: QTBUG-38792
Change-Id: I5e9f7374d6bfc60c427cbfd5e9b3e68bfcaae9f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
it is sometimes desirable to override values from the mkspec without
modifying (or wrapping) the spec itself. linux distributors do this on a
regular basis.
so far, we'd pick up CFLAGS, etc. from the environment, in a somewhat
autoconf-like fashion. however, over time, this approach proved
problematic: the concept doesn't mix particularly well with mkspecs to
start with, is unexpected (and therefore causes frustration), and
doesn't mix well with cross-building (at least the way it was realized).
ironically, it was implemented this way (quite a while ago) upon my
explicit request ...
the new mechanism uses explicit variable manipulations on the configure
command line, just like qmake itself understands. as it happens, this is
again quite similar to autoconf-generated configure scripts. however,
this time around we don't pretend to be actually autoconf-like, so we
also don't try to map any variable names (some of which have different
semantics anyway).
this commit also eliminates the last use of the QMakeVar() function,
so delete it and the underlying infrastructure.
Task-number: QTBUG-32530
Task-number: QTBUG-42962
Change-Id: Id31a6b80e1add08ca21f5b178614bda530d12374
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
Conflicts:
src/corelib/io/qtemporarydir.cpp
One side encapsulated a repeated piece of #if-ery in a local define;
the other added to the #if-ery. Made its addition to the other's.
src/corelib/kernel/qeventdispatcher_unix_p.h
One side moved some members into a struct; this collided with a #undef
check that neither side now has. Discarded the #undef part.
src/gui/opengl/qopengltexturehelper_p.h
5.7 deleted a bunch of methods; not clear why merge got confused.
src/tools/moc/moc.cpp
One added a name to the copyright header; another changed its URL.
Change-Id: I9e9032b819f030d67f1915445acf2793e98713fa
it's somewhat questionable to save the environment of pkg-config, but
not that of many other things we use.
additionally, we now have logic to automatically set it up from the
sysroot when it's missing.
This reverts commit 228392aff2.
Change-Id: I0612c196c9a5023bb3ef436aebfb87cb46d8cd14
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it positively makes no sense to have a configure test which will be
never reached due to the configure/qmake bootstrap failing with a
slew of totally unhelpful error messages.
pre-standardization partial c++11 implementations are now rejected,
except for VS2013, which is still sufficient despite not announcing full
compatibility.
Change-Id: I58af10e03960af06b80cedac105cf8433f7a1745
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since Xcode 8 (beta 2) that tool is no longer available
through xcrun. We resort to xcodebuild instead.
Change-Id: If9d7b535c1cbac2caae0112b2003283aeff34fb9
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Detect host and target architecture from within qmake, and set
QT_ARCH accordingly.
Change-Id: I30255f88c7645d197bd07355a1dff02b377cbbe8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This can be helpful for packaging and when one wants to limit the
features to ES 2.0 to ensure the same code is used on both build
machine and deployment machine. It also prevents inclusion of
GLES3/gl3.h. Windows configure.exe doesn't do auto detection of
GLES3 so it does not get the additional option.
Change-Id: I8750b41635e41bd0ac41d9d59d93570f7d2196e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Command line arguments, configure tests and features are now
defined in a json file and a configure.pri containing some
custom functions.
qmake uses the json file to determine command line arguments,
tests and features to be executed at configuration time.
A new qt_configure.prf contains all the infrastructure to parse
the command line, run the configure tests, determine the set of
available features and create a report about it.
Change-Id: If30ac089dd3e9f8c67ebd642bde10cfa960893bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The flag is not used anywhere anymore, so let's simply get rid
of it.
Change-Id: I0c395d18e7f0ef5af03c352753ebb537f5ae27dc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the assumption stated in b67a0836d is actually invalid - configure sets
build_all without debug_and_release there. debug_and_release does
actually imply build_all, though.
to make things less confusing, don't let configure inject
iphonesimulator_and_iphoneos into all projects, but handle it like
debug_and_release instead.
Change-Id: Ib7acdc63308a538862fc603428f81aba60bca08e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
And ask the user to apply one of the patches we're carrying to their
Standard Libraries.
Change-Id: I7e6338336dd6468ead24ffff141139c79056922e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Makes things symmetrical with the windows configure and cleans
up the logic in ssl.pri
Change-Id: I4a373afe78e904de7d04baea38c250ff0c9d5062
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is not being used anywhere anymore.
Change-Id: I4d8ded9e9f6c28b594930bd1ea9347ba2db8a2e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
CFG_WEBKIT is never set to anything (removed in 1b716724f, 2012),
so simply remove the dead code path.
Change-Id: I63ef7cc6a2bf2fbf9ceb63f1a54e28882ec6e01e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
- This is more readable in my opinion.
- Fixes the bug where configure script would fail in certain
cases for CFG_XCB="auto" by complaining of missing xcb
dependencies. "auto" should not fail, in case of missing
dependencies it should set CFG_XCB to "no".
- Error messages are more accurate.
Task-number: QTBUG-47624
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I0572be4ad441931b7c771246bbd70f819d810d22
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
I don't think anybody would do this today.
Change-Id: Id4eb69fb0a38bbd2a28099b66896e55d2b8c9022
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These plugins can't be used on Android, but they are built, installed
and also bundled into every .apk file.
Change-Id: I3326c913282af5bd43e1c732de9ae2f255711414
Reviewed-by: Christian Stromme <christian.stromme@qt.io>
QMAKE_SWITCHES (dead/broken since d1c10615e, 2012) and QMAKE_VARS
(dead since 389f8b039, 2006) were set, but never used in configure.
SUPPORTED was defined but never used since 018aff49cd (2003).
Removed dead command line arguments -depths (qws-related, dead since
f220f99a6d), -arch, -host-arch (both 921e5193), and -qconfig (710ec5ca).
Change-Id: I6bbed56c538cdd74b68432e7fd1e51177f79cc85
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This option hasn't done anything for quite some time, let's
get rid of it.
Change-Id: Ic6f2830aaf69ba2d054ce21f0d144a61ddf5d06b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Remove a code path for a hpux inside a MINGW section when doing the
opengl detection.
Change-Id: I20b8f7948cd663ec3d6c9dcb891f6fe9a2c9c358
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Setting doubleconversion if Qt is configured with -no-doubleconversion
doesn't make sense. This also brings the output of configure and
configure.exe in line with each other.
Change-Id: I8424cc45b1b69fdb0d074e76868e83544cf5eb38
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Since the system proxies are on by default now then we turn off
libproxy support by default so that there is no risk of a conflict
occurring.
For instance on Linux, it is possible that libproxy indirectly causes
KDE 4 libraries to be loaded which will cause a conflict with the Qt 5
libraries. Therefore we turn it off by default, since the system
proxy setting is the overall better one to have.
[ChangeLog][Important Behavior Changes][QtNetwork] libproxy is now
turned off by default. Configure with -libproxy in order to enable it
again.
Task-number: QTBUG-53649
Change-Id: I0c6c5b9091dc2b2b7662fd44f2a1b49c622e563f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
Reviewed-by: Richard J. Moore <rich@kde.org>
FreeBSD uses gcc as the default compiler until FreeBSD 10 where it was
switched to clang for the whole system. Choose freebsd-clang
for any system release > 10, otherwise choose freebsd-g++ by default.
Change-Id: I2bf38aa027453c25ed2a29d587c2962ded5fcd4a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
By changing the system proxies option default to being on, we
set it to be the more natural default setting. This is down
to the fact that people tend to assume that this is already
the default option.
[ChangeLog][Important Behavior Changes][QtNetwork] Proxies from
system settings will now be used by default. Configure with
-no-system-proxies to disable.
Change-Id: Iec5bbde9dff1311ce44418f6aa024bda05388cf6
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Peter Hartmann <peter-qt@hartmann.tk>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This fixes a long-standing issue for Qt packages, where the
paths detected at configure time do not necessarily match the
paths on the user's machine. Hence they have been stripped
manually from qconfig.pri so far, preventing moc from resolving
some includes.
The same logic in configure is left alone for the time being,
since the paths there are also used to filter paths returned
by pg_config and mysql_config. I expect that this will
eventually be removed too in a bigger refactoring going on
right now in dev.
Asking the compiler for implicit paths only works for non-msvc
builds - that is, gcc, clang and icc fortunately have a
compatible way to retrieve the paths. MSVC works
solely on environment variables, which will be taken into
account by a separate patch.
[ChangeLog][qmake] The implicit compiler directories that
moc needs for resolving include files are now determined
when qmake runs. So far QMAKE_DEFAULT_INCDIR was determined
at configure time, which might be wrong for relocated
installations.
Task-number: QTBUG-52687
Change-Id: If0706e8c56a5aca2b6e777e79e90342c498726f3
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Qt 3/4 had NIS configure options and tests for NIS defines,
those were used in QPrintDialog at the time to support
NIS-printers. As the implementation went away a long time ago
and no NIS featueres are implemented anywhere in Qt, the
configure options and config.tests for NIS can be removed.
Change-Id: Ie920e6a422540bf938623265b6ee68c793aeff84
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This info wasn't really very helpful, and would anyway always
contain either Preview, OpenSource or an empty string for
commercial users.
Change-Id: I311b991834fa83cf1a183083acd5112cda3d2e41
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
FreeBSD 9.3 is still supported and uses gcc as the default
compiler, therefore FreeBSD ports require patching the mkspecs
back. To avoid patching, move the mkspecs back to the right
place and adapt the path in the qmake.conf/qplatformdefs.h
[ChangeLog][FreeBSD] The freebsd-g++ mkspec was moved back and no
longer requires the "unsupported/" prefix, matching the FreeBSD
ports tree, as FreeBSD 9.3 still defaults to using GCC. Users of
GCC that did not previously use the ports patch will need to adapt their
build scripts and drop the "unsupported/" prefix.
Change-Id: Ideda4a33cccf5381000f6f50b6ae92a5c24ba9d4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Some platforms (e.g. FreeBSD) do not have libdl, but dlopen and related
functions are part of libc. So first check for dlopen in libc, and only
if that fails, look for it in libdl.
Task-number: QTBUG-52951
Change-Id: I65a8ed18fce157da32f4e1ffeba30d7513385a8f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
release_tools is not set in pure release builds - in fact, we complain
if it is.
Change-Id: Ifac73c0ef6f8967155b63f7fc9c9ce9de1acf337
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Let the user know that configure's switch from -no-freetype/-qt-freetype
to -system-freetype when -fontconfig is used is expected.
Task-number: QTBUG-35886
Change-Id: I95daaeffb0878bb785149f314096405a5c0fdc7a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The "checking for xxx... [yes|no]" is chosen so that it matches exactly
what GNU Autoconf does. That way, any tools that parse the output will
have less trouble.
This feature is useful for us when debugging a build, as not all checks
produce output in the configure summary.
Change-Id: Id75834dab9ed466e94c7ffff14456edb646a1ced
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this was meant to be part of d8be8110a, as qmake is obviously also a
bootstrapped tool.
-I/-L/-F/-l/-fw already had no effect on qmake.
Change-Id: I5095742ef5401558cc4432e7a774d0851d417bb0
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Have configure add a "CONFIG -= precompile_header" to qmodule.pri when
-no-pch is specified. Ensures that Qt is built without precompiled
headers (as requested) even if allowing precompiled header use is the
default for the toolchain.
Parallels changes to Windows configure.
Task-number: QTBUG-11545
Change-Id: Iab4021e74c4e9978770e917dff97b976c449dd8b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
[ChangeLog][Important Behavior Changes] Support for DirectFB is no
longer enabled by default, due to lack of development in upstream. To
re-enable the platform plugin, pass the -directfb option to configure. If
there is no interest in this platform, the support will be deprecated in
Qt 5.7 and will be removed in Qt 5.8.
See: http://lists.qt-project.org/pipermail/development/2016-March/025273.html
Change-Id: Icaa7fb2a490246bda156ffff143c62515a5f575b
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
There was a small logic error in the code selecting the debug/release
C(XX)_FLAGS used when compiling qmake, that could lead to us not
specifying any flags at all.
Change-Id: I5d3c44367d535a17570e3602029b84a02706d624
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
macx-g++ is not supported anymore.
Change-Id: Ibae25768e240d6e8e27c09a345ea02a9b0477fc3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
There's no reason not to allow compiling Qt without any QPA
plugins. It's enough to clearly warn about it at the end
of configure instead of aborting the build.
Change-Id: I52ff681b68fcbfd9c5e28e555224812e6c441dc6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This functionality will get replaced by a new and more flexible system
to configure Qt.
Change-Id: I04cf694ab1671eeed39b79a660566595a22f54a7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
With 5.7, we can rely on c++11 atomics (or the msvc ones), so
the note doesn't make sense anymore.
Change-Id: I10cc67f3dd840f3272ca975c2c9120a8c871a2fb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
so it turns out that the 'unix' conditional in moc.prf meant that the
feature was not enabled *anywhere* by default, as the unix configure
disabled it everywhere.
amends b3fcaea5.
Change-Id: Ie41ed2ebc338e560b8d6bfbb0bb18888e31b6d13
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Make sure we always set the base feature as a flag in qtconfig, and
set the sub-feature in addition if it's being used.
Change-Id: Icfeb0ec1ac9e1a615b5b22eb5fcce47e0e7fc153
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This makes the -separate-debug-info configure optional functional, which
generates dSYM debug info bundles for Qt libraries on Apple platforms.
Task-number: QTBUG-37952
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: Ia247674740bf450130a15db926df07fa9007e2ca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Detect if DirectWrite 2 is available, and support color fonts if possible.
One limitation worth mentioning is that if the color font contains regular,
monochrome glyphs as well, then these will be drawn in black, and not in the
pen color. Fixing this would require some elaborate rewrites in the font
rendering system, since we would have to have two font caches per
color font (one for mono and one for colors), or do some sort of trick where
we make argb(r, g, b, 0) mean subpixel alpha instead, and detect glyphs that
are not correctly premultiplied when blitting to the screen.
Another limitation is that the approach does not work with distance field
rendering. In principle we could support this on Windows, since the
format is vector based, but it would also require substantial work and
it is not possible to support for Apple/Google fonts anyway, so it would
just lead to code which is not cross-platform.
[ChangeLog][Windows] Added support for color fonts (color emojis) when
DirectWrite 2 is available.
Change-Id: I6a608dd5d2aa3a7e762a06830902bddac7c550a5
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
These values are artifacts from the past and not used anymore
since Qt 3 times.
Change-Id: Ide2a7b3bd000ec0bc280a5467549c1a974c019e0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The feature is called gtk3, so the naming of the CFLAGS/LIBS should reflect that.
At the same time, remove the unused QMAKE_LIBS_QGOBJECT variable.
Change-Id: I565a098aaa80f380de0da534d058f315e77a33f6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
no-zlib is no longer supported, so these lines can't have any effect.
Change-Id: Ib5ef9a97a0687945606b4a718e339590bc501fe9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The feature is called xinput2, so the defines should have this in their name as well.
Change-Id: I661dd3ea3726f4a0954e788d5f0083ace10bbe89
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Most libs use QMAKE_LIBS/CFLAGS, but some have other naming
conventions. Unify them into using QMAKE_LIBS/CFLAGS.
Change-Id: I39b188adc1f9a223a83b294c5315c3095a9c68de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's 2016, and file sizes larger than 4G are common, so
-no-largefile is something we really shouldn't support
anymore.
For now left the implementation as is, just removed the
configurability from the command line. But this should
really get replaced by decent configure checks that
check for 64bit stat() vs stat64() vs 32bit stat().
Change-Id: I057515e3cc1f06a022d80f02e866944428026b1d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These are not being used in Qt anymore, we use their
xcb replacements instead where it makes sense.
Task-number: QTBUG-30939
Change-Id: I2d8141818b402c23b29b0c0398f876a6189d0d27
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Compiling the drivers into Qt Sql does not make a lot of sense
anymore, as we handle plugins well enough in the build system
these days.
[ChangeLog][Build system] SQL drivers are now always compiled as plugins.
Change-Id: I364b82a480849399d1fafe4b20e9f08922569260
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Our handling of plugins when Qt is build statically is
nowadays good enough, so we don't need to build the
JPEG and GIF support directly into Qt for static builds.
Let's simply always build them as plugins.
Also simplify the logic in configure, and get rid of the
no-gif, no-jpeg and no-png config variables.
[ChangelLog][Build system] JPEG and GIF image support is now
always built as a plugin. Removed -imageformat-[jpeg|gif]
arguments to configure.
Change-Id: Ic01559ff406c966807b3be8761252e8802adcdf7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This brings the feature name in line with the name
of the define.
Change-Id: Ib56c9c25ce83c396e5085d69efd3fe953c1aadd0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
...instead of overwriting when building qmake for windows.
Change-Id: I89eb33439b03a0ad33d006d12c9896c87d271c4f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The plugin builds as a static plugin.
It is based on the Linuxfb plugin.
It uses the INTEGRITY FB API for framebuffer for display, and HID API
for input (mouse, keyboard, touch).
Because this is the only supported plugin and requires to be included
as a static plugin, automatically add the platform to any application
through qmake.conf.
Change-Id: Ic228afb59cb39dd02c2d538de46caf6e6ea7d153
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
Targets (xplatform) include integrity-armv7 and integrity-x86.
[ChangeLog][Platform Specific Changes] Added support for INTEGRITY RTOS.
Change-Id: If7827791e0a977ff198cb99e9dcc684a010bbb81
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
