Scale coordinates in a few places, remove pixmap scaling in
grabWindow() (Windows).
Change-Id: Iba9e5d3ca55422a14eda09c8d04329a455d3acb3
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This removes a lot of duplicated code that existed in both qglobal.cpp
and qsystemerror.cpp, including the hack to get the correct strerror_r
signature.
This removes the incorrect use of EACCES, EMFILE, ENOENT, and ENOSPC
from qt_error_string on Windows. qt_error_string is supposed to be used
only with Win32 error codes from GetLastError(), despite there being a
lot of uses in cross-platform and even Windows-specific code that pass
errno constants.
It may or may not work: that depends on whether the constants happen to
match. ENOENT matches ERROR_FILE_NOT_FOUND and one could argue that
ENOSPC matching ERROR_OUT_OF_PAPER is acceptable, but EMFILE isn't the
same as ERROR_BAD_LENGTH nor is EACCES, ERROR_INVALID_DATA.
Change-Id: I1eba2b016de74620bfc8fffd14cccb7f77f4b510
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ASN UTCTime uses two characters to encode a year (YY). When converting it
into QDate, it's quite naive to just add 2000. According to RFC 2459,
these YY represent dates in the range [1950, 2049].
This patch also introduces a helper function doing the checked conversion
from a string to int (to be reused in the following-up patches).
Task-number: QTBUG-61934
Change-Id: I3f6f471d24e8357b83b2f5973023b2b842751389
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Consider the raw string \\\\. The previous algorithm would consider
the last 3 \ to be escaped because the previous character is a \ and
thus calculating a maxLength of 3.
But this should be treated as two escaped \ with a maxLength of 2.
Change-Id: I6c4b8d090a2e1c6e85195d5920ce8b80aea1bc2d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QVariant claims to be able to QVariantHash and QVariantMap, but the
actual conversion implementation is missing.
Task-number: QTBUG-61471
Change-Id: I0cba74642aa77dc423effed289bc7619922a89eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Subtract the viewport margins from the contentsRect in
QCommonListViewBase::updateHorizontal/VerticalScrollBar(). This
affects list views in icon mode and list mode / ScrollPerPixel.
Task-number: QTBUG-61383
Change-Id: I6f2f7951ac9344ac21cef1eba061780d130e2467
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][QtCore][QLocale] Fixed the conversion of QTime to string
form and parsing from string form to always treat the value as the
decimal fraction of the seconds component. That is, the string format
".z" produces/parses ".2" for 200 milliseconds and ".002" for 2
milliseconds. Use of "z" or "zzz" is discouraged outside decimal
fractions to avoid surprises.
Task-number: QTBUG-53565
Change-Id: Ia19de85ad35e4eb7bb95fffd14792caf9b4a5156
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QWindowsFileSystemWatcherEngine uses one change notification
per directory to watch directories or files within that
directory. Adding files and their directories in a sequence
caused the value in QWindowsFileSystemWatcherEngineThread::HandleForDirHash
to be overwritten.
Relax the check for the flags (watcher attributes) to use >= and recreate
the change notification of a directory should its flags be insufficient.
This triggers when a file is added after its directory since files
require more attributes.
Task-number: QTBUG-61792
Change-Id: I371a72f1934fa82c53aaf84beb907825031f1c81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix a number of issues that caused polygons to not always be drawn
fully connected.
Ensures the original lastPixel is set when drawing closed polygons,
ensure we don't round away from the original starting point, and add
handling of edges that need to be rounded half a pixel sideways to line
up with endpoints.
Task-number: QTBUG-27053
Change-Id: Ib51ee5623a629996af51a0967096383f04e91e2f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Since the result is an actual zero, this section of code looking for
underflows kicks in. But we forgot to take the capital letter into
account when parsing the number.
Task-number: QTBUG-61350
Change-Id: Ia53158e207a94bf49489fffd14c6abbd21f0bac0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
tst_QLocale::macDefaultLocale() was determining local-time's current
offset from UTC and using it when working out what to expect the
offset at 1:2:3 today to be. When a transition happens after 1:2:3 on
its day (which is usual for DST changes in Europe), this lead to using
the new offset to test a time before the transition; the test was thus
wrong and failed.
Use the time to be tested (and current date) to compute the offset to
use, instead of using the current date-time.
Change-Id: I1c02a5579bca859e1d1aeb4f45b24871a08287af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reads the v4 and v5 info-header together with the rest of the info-
headers, and use that to report the correct image format before
decoding.
Change-Id: I69e2bcc54367b7f14820815ae2ae1fa2d8d5dc8c
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Qemu uses some memory for each generated thread. This test creates
> 80000 threads and consumes about 10Gb of memory which is too
heavy for a VM.
Task-number: QTBUG-59966
Change-Id: I1bb8a0d7955778f5201948b41befcb9f1f391514
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
A visibile QOpenGLWidget receives a QEvent::WindowChangeInternal which triggers
a QOpenGLWidget::reset(). A hidden QOpenGLWidget never received this event
so it was never reset, resulting in a black rendering.
Includes unit-test that fails without this patch.
Change-Id: I9d2c57d66fa629f631a9829a5ebf4de09998ad75
Task-Id: QTBUG-60896
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
tst_qvariant.cpp(80): warning C4309: 'initializing': truncation of constant value
tst_qvariant.cpp(4635): warning C4309: 'initializing': truncation of constant value
tst_qbytearray.cpp(1438): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
tst_qbytearray.cpp(1440): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
http2srv.cpp(64): warning C4018: '<=': signed/unsigned mismatch
tst_qinputdialog.cpp(352): warning C4804: '<=': unsafe use of type 'bool' in operation
Change-Id: Id012d88b7b20c5c9f128f2ef53753cc1d479f358
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Print time in the error handler to get some diagnostics
about when the network connection is dropped.
Task-number: QTBUG-61673
Change-Id: I376bec81f52d75c9b601f2af9b7e0b63f5883bb0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Use 15s instead of 10 (one check took 7.5s on my development machine, even).
Port to QTR_VERIFY_WITH_TIMEOUT instead of rolling our own waitForDone(),
as that reports (within limits) by how much the timeout was exceeded.
Change-Id: Id76a66d5f4fe3a4e814915add329eb4de3d264a7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The test fails for unknown reasons when using the mesa swrast when using
qemu/kvm (as opposed to when using the vmware mesa driver).
Task-number: QTQAINFRA-1318
Change-Id: Ib7e9d894cd368b8c2c12d83ec1e4862622781fe6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
It's failing for inexplicable reasons not only on 10.10 but also 10.11.
Task-number: QTQAINFRA-1317
Change-Id: Id316764443dfe9e0ae30e2d25d8bae73fa255617
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The test is failing inexplicably on macOS 10.11.
Task-number: QTQAINFRA-1315
Change-Id: Ia0162768b6d4fdd016bce62b92c3df0b5d4ed8d0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Under qemu/kvm the systemProxyForQuery call - when initiated from a
secondary thread - never completes. Consequently the thread hangs, test
fails and the crashes due to the inability to cleanly terminate the test
thread.
Task-number: QTQAINFRA-1200
Change-Id: I9bd4ed163d215fadd8532a03bbdccd80fc8d9cb1
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
qtreewidget.h:179:53: warning: 'search' may be used uninitialized in this function [-Wmaybe-uninitialized] ^~
tst_qtreewidget.cpp:1564:22: note: 'search' was declared here
QTreeWidgetItem *search;
tst_qtreewidget.cpp: In member function 'void tst_QTreeWidget::expandAndCallapse()':
tst_qtreewidget.cpp:2678:18: warning: 'p' may be used uninitialized in this function [-Wmaybe-uninitialized]
Change-Id: I19c9dc86aa12f36c26ae2475f1854ed17fad0638
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
It is flaky on macOS 10.12.
Task-number: QTBUG-61500
Change-Id: I3dfb6979808dec3a20896c2579dd1f5124c94a70
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Randomly timeouts in the CI.
Task-number: QTBUG-59679
Change-Id: I28410b747b2033fc0ef6286a11c88cd0c07eb247
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Present for example in the Windows's Atlbase.h header.
We should not abort the compilation, just ignore that construct
Task-number: QTBUG-56634
Change-Id: Id6e4c9f03cb1cef46e330f4fbcae80ce4f3730c6
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
show will use the platform's default flags but the test actually checks
for the flags that were set before so we have to use setVisible(true)
instead.
Change-Id: I52c055ec07d6f0dee626626318c875aefdf67484
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
As the files are packaged into the binary, they have to be
extracted, before they can be ::open'ed.
Change-Id: Ie83086a2b9a73b6b0de462bdb52a71bb277ae06f
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The test was never loading images from a valid path, and thus never
had any fullfill the base option which meant nothing was tested.
Making it work revealed that the Format option on BMP formats doesn't
predict semi-transparent files.
Change-Id: I7035a0f63ebfbce940ce7a17a6142cf177480798
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
FAIL! : tst_QWidget::restoreVersion1Geometry(geometry.dat) Compared values are not the same
Actual (((widget.pos()))): QPoint(90,90)
Expected (expectedPosition): QPoint(100,100)
Loc: [tst_qwidget.cpp(3193)]
Remove the previously added QSKIP since this test now passes.
Task-number: QTBUG-26421
Task-number: QTBUG-46116
Change-Id: Ieff474a8a69c14a0df231a9a587aee02df4e8ea7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It may crash on (probably a bit broken)
qtbase/src/printsupport/dialogs/qpagesetupwidget.ui
Change-Id: Ibca95a3d8aa4899adbc952aee7b46621ac888c6a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The motivation for this change is to make it simple to pass a
correctly sorted environment block to Win32 CreateProcess(). It is
also nice in other contexts that the environment variables are
sorted. The change is made for all platforms. This keeps it simple and
the only ill effect is slightly slower lookups.
Concerning the environment block passed to Win32 CreateProcess:
The environment block that is passed to CreateProcess() must be sorted
case-insensitively and without regard to locale. See
https://msdn.microsoft.com/en-us/library/windows/desktop/ms682009(v=vs.85).aspx
The need for sorting the environment block is also mentioned in the
CreateProcess() documentation, but with less details:
https://msdn.microsoft.com/en-us/library/windows/desktop/ms682425(v=vs.85).aspx
Task-number: QTBUG-61315
Change-Id: Ie1edd443301de79cf5f699d45beab01b7c0f9de3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When punctuation is ignored then the kUCCollatePunctionSignificantMask
should not be set. This was originally thought to not be working due to
a bug on the Apple platforms, but this is not the case.
[ChangeLog][Platform Specific Changes][macOS][iOS] QCollator now
respects the ignorePunctuation property on Apple based platforms
correctly.
Task-number: QTBUG-41978
Change-Id: I62044076387d6e4479f4aaef3c2f48f49dbd160e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- Put all widgets in one dialog so that show/setActive occurs only once.
- Use the center of the widget geometry for positioning.
- Remove BypassWindowManagerHint which likely causes qWaitForWindowActive()
to fail.
- Move the cursor out of the way and subsequently send mouse events
to the QWindow
Task-number: QTBUG-51400
Change-Id: I2176d8dbaead72d7a6fa89aa769e4c804eea7a0c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The test fails as sendmsg() on the socket trying to deliver a packet to
the IPv6 link-local fe80 address returns with -ENETDOWN. I cannot figure
out why this happens when RHEL 6.6 is run under qemu/kvm but not under
vmware. More details are in the task, but meanwhile the result of this
test is ignored.
This affects only RHEL 6.6, it passes on RHEL 7.2.
Change-Id: I4ade5cd249dd0d1901368ab571dad324e0fd10c2
Task-number: QTQAINFRA-1042
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
QTimeZone("UTC") should be valid, as "UTC" appears in the list of
availableTimeZoneIds(), and tst_QTimeZone::dataStreamTest() constructs
timezones like this, which are considered valid.
The internal representation of a QTimeZone("UTC") as created by
QTimeZone::QTimeZone(const QByteArray &ianaId) is a QUtcTimeZonePrivate
which isValid(), so the containing QTimeZone isValid() too.
When QTimeZone is serialized into a QDataStream, it calls
tz.d->serialize(ds) which is QUtcTimeZonePrivate::serialize. This
writes QStringLiteral("OffsetFromUtc") followed by the IANA ID and
the offset (etc.) to the datastream.
When QTimeZone is deserialized it looks for this marker string, and if
present, it passed all of the parameters to the QTimeZone constructor
(not just the name). However, that constructor does not support standard
IANA timezones (only custom ones), and when it detects that the supplied
IANA ID is actually listed in availableTimeZoneIds(), it leaves the
pointer to the QTimeZonePrivate uninitialized (NULL), which leaves
the QTimeZone invalid (isValid() returns false).
Thus, a valid timezone which was serialized and then deserialized has
become invalid. This also affects serialization of QDateTimes with
timezones.
Fixed by calling the name-only constructor first, which works (only) for
IANA standard timezones and leaves the QTimeZone invalid (isValid()
returns false) otherwise. In which case, we can call the many-argument
contructor to create a custom timezone with the same offset as the one
which was originally serialized.
[ChangeLog][QtCore][QTimeZone] Fixed sending IANA standard UTC-offset
QTimeZones through QDataStream, which previously came out invalid after
deserialization.
Task-number: QTBUG-60595
Change-Id: Id9c47e8bda701faae4d800e012afb6db545b2fe9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It is possible that tmpdir already exists as a leftover from previous
tests. That is no reason for the test to fail.
Change-Id: I010633fb92defb064093af9872ae6fd2178f07dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
load(resources) makes embedding the test data into the executable
fail for platforms that use builtin test data. As the load call
is only used to obtain QMAKE_RCC we can avoid that call by
assuming that rcc was not renamed and assembling the path ourself.
Change-Id: I25b982d10f5617d9a213803e7e4bcc85fc66b2e7
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The binary hangs rather than segfaults on that platform.
Task-number: QTBUG-59936
Change-Id: Id7d38edb7c746e3c0cd4b4941e0e19b3d42a628a
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
By avoiding unneeded nested QPainters.
Crash was:
ASSERT: "s" in file /data/sources/qt/qt5/qtbase/src/gui/painting/qpaintengine_raster.cpp, line 2239
s was nullptr because the inner QPainter had called updateState(0), which is then dereferenced by the outer QPainter.
Task-number: QTBUG-61036
Change-Id: I7aad648f805f1abac4d38dfbefa2292da8b52af4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Normaly, in C++ It's not valid to define a keyword, but it turns out that some
system header do, so we just silently accept it.
[ChangeLog][moc] moc no longer errors out if a C++ keyword is #define'ed
Task-number: QTBUG-61204
Change-Id: Ia4d3ff9c77b6ff261b6140c220cfb81bd13f1d6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There were two more places that blacklisted certain interface types that
commit e579c822c5 didn't catch. This
commit adds those two.
Task-number: QTBUG-61263
Change-Id: Ia58d0480a9169f0f121aec03bf2e8900a58939cd
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Similar on how it is done for Windows desktop we also use the given
style hint when building the list of fallbacks a font family.
Change-Id: I71378581d07f20ebe5bf0bc757bba919cc70e118
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The documentation says that it's equivalent to
qgetenv(varName).toInt()
But the implementation wasn't. QByteArray::toInt() verifies that the
entire string was consumed, so QByteArray("1a").toInt() == 0, but
qstrtoll alone doesn't. That is, qstrtoll("1a", ...) == 1.
The implementation also detected the base, a behavior I kept. Instead, I
updated the documentation.
Change-Id: I0031aa609e714ae983c3fffd14676ea6061a9268
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This method now returns -1 by default, due to commit 6255cb893d
which mistakenly replaced -1 with Qt::IgnoreAction (0x0).
As a result, dropping is forbidden in a number of applications
(I detected this in zanshin).
Change-Id: I4922451216e08d5d3fe36f8ba87364a361b691bf
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
A number of drawing paths were never tested by lancelot because we
always used argb32pm for subsurfaces. This patch switches the
subsurfaces to use the painter format or its alpha version. This means
changes to composition tests as it changes precision, especially of
alpha in the a2rgb30 formats.
Change-Id: I24d53bf6e1db8cca36bda69e2ddf07f20256b3c8
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
tryAcquireWithTimeout(0.2s) was already blacklisted and
now the same failed with "(2s)".
Task-number: QTBUG-58745
Change-Id: I82363238c08056d2969a7616e3a6e5af080d537d
Reviewed-by: Liang Qi <liang.qi@qt.io>
We have to use a temporary data path for winrt, as the applications
are sandboxed and cannot just put data anywhere.
Change-Id: I8f95de132e5b5ac77441cbbf26af873b8018c7cb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
In the referenced bug report, dismissing a QFileDialog while the
Qt Virtual Keyboard was in use would result in a crash.
Dismissing a file dialog created with
e.g. QFileDialog::getOpenFileName() causes it to eventually be
destroyed. When this happens, it starts deleting its children. Each
child widget's destructor calls clearFocus(). In clearFocus(), there is
a block of code that emits QWindow::focusChanged(), passing the result
of focusObject() called on that widget's window.
QWidgetWindow::focusObject() could end up using itself as a fallback
focus object if it had no other focus objects (e.g. children) to use
instead, even though it was in the process of being destroyed; as were
all of its children. The Qt Virtual Keyboard plugin would then try to
use the focus object, even though it was in an invalid state.
To fix this problem, we return early from QWidgetWindow::focusObject()
if the window is in the process of being destroyed.
Task-number: QTBUG-57193
Change-Id: I137cf9415812ce2e0419c0afe8076ce150f248cb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jarkko Koivikko <jarkko.koivikko@code-q.fi>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This makes the test a lot faster and perhaps more reliable.
Change-Id: I055cfde627c75f71735eabbf01af2a196bd8b00a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Packets sent to to link-local addresses on it are never received. We
don't know why this happens, as the tooling provided by Apple for
development is close to useless. So we just ignore this interface.
Task-number: QTBUG-61041
Change-Id: Ia608df1fff6bdee5238e107d8a50292a1f9e5c03
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
It was grabbing a QLabel without accounting for the size of
the window in the case where the DPI is larger than 1:
FAIL! : tst_QWidget::translucentWidget() Compared values are not the same
Actual (actual.size()) : QSize(32x32)
Expected (expected.size()): QSize(16x16)
Change-Id: I4873f3c6364ee2696f5612d91e6c97c60b2cd915
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
tst_QSharedPointer can't create a pipe as the OS has too many files
open. Systems like macOS have a lower limit to these simultaneous files
open.
Task-number: QTBUG-60410
Change-Id: I21e89f992ada2a7d09b706522a05b5952f00ec33
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is a followup to 77a8e90cdd which
didn't handle the case where no columns had been moved.
visualIndices and logicalIndices are empty until initializeIndexMapping()
is called, in which case appending is wrong.
As a result, visualIndex(i) would return -1 for the values over
those added by read(), and an assert would happen at painting time.
The fix is to leave visualIndices and logicalIndices empty if
they are empty already, leaving it to initializeIndexMapping()
to fill them later if necessary (e.g. when moving a column).
Task-number: QTBUG-60837
Change-Id: Ia7e4b9d3122647984acd434dfaa0400df319d065
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
They have been blacklisted on windows previously and now fail on
macOS 10.12 as well.
Task-number: QTBUG-60993
Change-Id: Ib7a3acfc7f2285c0a587d4abd88a4a218391d623
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test has been observed to be flaky on Windows. Introduce
QTRY_VERIFY_WITH_TIMEOUT for diagnostics.
Change-Id: I72abdd2e5544f8f35199876486ab15151f60e5f2
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
According to the test metrics this test failed 10 times in the last two
days. Interestingly the log shows that usually 5.5 seconds would have
let it pass.
Change-Id: I38f21f35bd6624f1d3de1e1e811a4d107136a241
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
There was only one place that needed it.
Change-Id: I067fcfe299b34ab6a771fffd14bf2945f1953d10
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QPainterPath could in certain cases where sub-path points were on the
border of a rect fail to calculate intersects() correctly.
The patch adds handling of such cases by looking if end points cross in
or out of the rect. Other cases are already caught.
Task-number: QTBUG-31551
Change-Id: I6284da8ff8646d4636702923a76362302dde5767
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Known to fail now and then, most likely due to the mouse cursor
moving while the test is executing.
Task-number: QTBUG-60754
Change-Id: Id8f0786416d0df33f197a7a8f99b7aad1341a6be
Reviewed-by: Liang Qi <liang.qi@qt.io>
On winrt, the default application version is determined by its
manifest file. The template's default version is 1.0.0.0.
Additionally addRemoveLibPaths should not fail if libraryPaths
only contains currentDir.
Change-Id: Ifdd517f1bfe2fdf641f3d728ebe1fa144df1a8ca
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Found by GCC 7.
Change-Id: I90267617a038558e5b5213c598a949baf8d4d9be
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
CI metrics show that this test was flaky ~38 time in 3 days.
The problem is old: after we get a surface, a window manager can still
decide to re-position the window.
The fix is to simply send the touch event in a position where it is sure
to hit the window (usually the offset is the title bar height).
The blacklisting seems to not have worked, I could reproduce the failure
on a linux/xcb machine.
Change-Id: I5229fe020ba75c984fd3b6c322ad00d769707573
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This commit fixes two bugs:
1) Two ranges should not be merged if they are of different columns.
The old code would have merged (0,0) with (1, 1). Tranforming a selection
of just two indexes in a rectangle of four indexes.
2) The QItemSelectionRange appended had wrong column and worked only for
indexes of the first column. For example if 'tl' was (0, 1) than br was (0, 1)
so the QItemSelectionRange would have be ((0,1), (0, 1-1)) so ((0,1), (0,0)).
This QItemSelectionRange is invalid because topLeft columns is greater than
bottomRight column. The fix take in consideration the bottomRight column.
Task-number: QTBUG-58871
Change-Id: I591ef0bcc63926f24a7b1ced002af9b7737a4b6e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
... and update the unittest accordingly.
Compared to the 1.8 release there is one change in freedesktop.org.xml,
the magic for application/x-java-keystore was changed from host32 to
big32, as done upstream, see https://bugs.freedesktop.org/show_bug.cgi?id=99328
Task-number: QTBUG-60608
Change-Id: I47de71c9396cfc3eabc884d5679c73a3e4850a17
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The conditions checked are compile-time conditions anyhow.
Simplify or strenghten a few conditions while at it.
Change-Id: If07f2aedca4c3632d852a8fdb2b3f7eb55a96c93
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Backtrace logging tests were not passing for arm when -O2 option was used.
Set "-fno-inline" on for the app whose backtrace is to be inspected.
Task-number: QTBUG-59966
Change-Id: Id1bbf78c31dc524357a30c7d39c239689621b155
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The operator double() and operator long double() members of qfloat16
are causing cast ambiguities. This removes them, leaving only
operator float() which seems to be adequate.
Also, additional arithmetic operator tests were added which without
this removal fail to compile.
Change-Id: Id52a101b318fd754969b3de13c1e528d0aac2387
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They're deprecated since C++11 and removed in C++17.
Change-Id: Ia2acd9312707bfee96838743645a04ae1780e5dd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The existing QHash::operator== does not work when the same
keys appear in different order between the two hashes being compared.
However, relying on iteration order on a QHash is (as usual) a bad
idea and one should never do it.
Task-number: QTBUG-60395
Change-Id: Ifb39a6779230e26bbd6fdba82ccc0247b9cdc6ed
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test was disabled because it was checking if we had the right
permissions. It does seem as if the permissions do not matter as
long as everything is in process though.
As seen by the regression in fafdb171e0
it's important to run the test. This regression would have been
caught.
Change-Id: Ia1938e683badd1de2657aa6dc8a3b3bbe430e8c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Return an empty size if no suitable entry found to avoid mismatch with
the returned pixmap()'s size (the QIconEngine::actualSize() returns the
originally requested size).
Change-Id: Ia278719a54392b62c5f9fc0529476baba5cd7df0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
There were still two cases where spurious notifications would be
possible:
- user calls hasPendingDatagrams()/pendingDatagramSize() on UDP
socket somewhere outside the slot connected to readyRead()
signal (::WSARecvFrom posts FD_READ notification, even if
a notification for incoming datagram already exists in the
message queue);
- a socket was registered to receive several types of event and
WM_QT_ACTIVATENOTIFIERS message is located between the
different events for this socket in the queue.
Provided patch ensures that the message queue is synchronized with
the Qt event processing mechanism and adds a way to detect spurious
notifications inside the window procedure.
Task-number: QTBUG-58214
Change-Id: I49609dace601f300de09875ff1653617efabd72f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
If the user calls QLocalSocket::setReadBufferSize() with a value less
than the current size of the pipe buffer, startAsyncRead() would call
ReadFileEx() with invalid parameters:
ReadFileEx(handle, nullptr, some_big_value, ...);
Change-Id: I3d153e3ec34f8038dc001c1c896aeceb666a8979
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change the check for the unambiguous match to be case insensitive.
Task-number: QTBUG-60466
Change-Id: Iaa019cc803a56b015f45309fb1b3a7a8a3d82ee4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
I don't know why.
tst_qflags.cpp(114): error: no instance of function template "verifyConstExpr" matches the argument list argument types are: (Qt::MouseButton)
tst_qflags.cpp(91): note: this candidate was rejected because there is a type mismatch after argument substitution
Change-Id: I84e363d735b443cb9beefffd14b9581d77933cb8
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The intersection algorithm for intersection with rects, might return
one edge of the rect even if that edge does not intersect with the path.
To deal with that we collapse paths with empty bounding rects to the empty path.
Task-number: QTBUG-60024
Change-Id: I3e305983c66548e772d7d7ce3de99d715edbdd1b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This reverts commit 96c27f0dfa.
We now use a custom keychain that should fix the original
problem with the test.
Change-Id: I52e4105f34a46ad7080750d9a62480ebe3a56e68
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The fix is outdated - the tests it was fixing - pass on 10.11.
Change-Id: I8b42c1d3d2f1279382b15c20587dcc93cf1b6b40
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Unselecting with offscreen and minimal platforms behave similarly as in
Windows and QNX. If left or right key is used for unselecting, cursor
position is changed.
Change-Id: I022cd2fec80ad1875fec983e1e3536a105e18bb2
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
If QEMU is provided sysroot with QEMU_LD_PREFIX, it opens files from there. If their
owner is the current user, testing their access rights based on assumption that they
are root fails. Skip the tests in that case similarly as is already done when the
tests are run as root.
This fixes following tests:
- tst_QTemporaryDir::nonWritableCurrentDir
- tst_QNetworkReply::getErrors(file-permissions)
- tst_qstandardpaths::testCustomRuntimeDirectory
Task-number: QTBUG-59966
Change-Id: I972ce37b4b5a7747cdd732a8e4a737ef09cbc6a5
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Changed testing of focus of modal dialogs to match behavior on offscreen
and minimal platforms.
Change-Id: Ife3ea41b4b78df2e64c8d8e740332914b1e5a67c
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Some features are not implemented by "offscreen" platform. Skip tests
failing because of that. Some failing cases are also already skipped or
blacklisted on "xcb" platform.
Change-Id: I17269169379c270bd7d6f2ddda03ad9b114a71ce
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
We guarded against the Unicode form being invalid and did not produce an
encoded form. But we did not guard against proper Punycode sequences
that decode to forms that had not passed the proper Nameprep stage. So
check for that and, if it fails, just keep the label in the form we
found it in (it's valid STD3 anyway).
[ChangeLog][QtCore][QUrl] Fixed a bug that caused certain domain names
that look like Internationalized Domain Names to become corrupt in
decoded forms of QUrl, notably toString() and toDisplayString().
Task-number: QTBUG-60364
Change-Id: Iadfecb6f28984634979dfffd14b833142cca8d0d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The whitelist is kept in ACE form, so if the TLD came in Unicode, we
need to run ToASCII before we can check the whitelist. This is slightly
inefficient because we'll run the same operation later in this domain.
Change-Id: Iadfecb6f28984634979dfffd14b831f37b0f4818
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Florian Bruhin <qt-project.org@the-compiler.org>
This was simply not working for two reasons:
- The index passed to QMetaObject::metacall was not right (there was an offset
because of the return type)
- If the registration succeeded, the arguments were not even initialized.
The tests in tst_moc always called QMetaMethod::parameterType before calling invoke,
which was properly registering the type. So this was not seen in the tests before.
[ChangeLog][QtCore][QMetaMethod] Fixed crash in invoke() with QueuedConnection and
types whose metatype gets automatically registered.
Task-number: QTBUG-60185
Change-Id: I4247628484214fba0a8acc1813ed8f112f59c888
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It only contained a concatenation of the individual rule sets,
probably to fix their order in a central place, as well as
simplifying iteration in defaultCategoryFilter().
Fix these two issues differently, but introducing a RuleSet
enum that lists rule sets in the order in which they should
be applied by defaultCategoryFilter(), and turn individual
rule sets vectors into a C array of vectors.
This enables two nested loops in defaultCategoryFilter to
replace the one loop over 'rules'. Apart from building up
'rules' in updateRules(), this was the only access to that
member. That leaves updateRules() with just the task of
running defaultCategoryFilter() on the new rule sets.
Consequently, a call to updateRules() can now replace the
identical loop in installFilter().
Performance should not suffer. Iterating over a fixed-size
array of vectors is hardly any slower than iterating over
a single vector, and while the construction of 'rules'
was probably a one-off task in most programs, this way
of keeping the rules also saves memory because rules are
not kept in two different vectors.
It is also more maintainable, of course.
Change-Id: Ibc132d096c8137dd02b034752646212e51208637
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QEMU does not support all syscalls needed for tcp socket testing.
Skipped tests that can't pass on QEMU.
Task-number: QTBUG-59966
Change-Id: Ib6d12d0fc4c913a0222e13db57f0864b7fdf21ba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
8a375341cf added swap() to QJson* classes
and marked them shared-not-movable-until-qt6.
This change made QMetaType start reporting that QJson* classes were
movable; however, the test used QTypeInfo and not QTypeInfoQuery to
double check that information.
Port the test to QTypeInfoQuery.
Change-Id: I3227a70a8f24c0013257e180e9cb9cfebe9947f9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since commit bf2160e72c, we can rely on
charNN_t support in all compilers except MSVC 2013, and since that
commit, we use (in 5.10, not 5.9, yet)
!defined(Q_OS_WIN) || defined(Q_COMPILER_UNICODE_STRINGS)
when we only need charNN_t, the type, as opposed to its library
support (u16string, char_traits<char16_t>, ...).
This patch splits the Q_C_UNICODE_STRINGS macro into two, adding
Q_STDLIB_UNICODE_STRINGS for when we need std::uNNstring, leaving
Q_C_UNICODE_STRINGS for when we need just charNN_t support.
In QDebug, when constructing a QChar out of a char16_t, cast to ushort
first, since QChar(char16_t) was only officially introduced in Qt 5.10.
[ChangeLog][Potentially Source-Incompatible Changes] The internal
Q_COMPILER_UNICODE_STRINGS macro is now defined if the compiler
supports charNN_t, even if the standard library does not. To check for
availability of std::uNNstring, use the new Q_STDLIB_UNICODE_STRINGS
macro.
Change-Id: I8f210fd7f1799fe21faf54506475a759b1f76a59
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 47cc9e23a3.
We use QCoreApplication::applicationDirPath in the logging initialization to find
a possible qtlogging.ini file. Because QCoreApplication::applicationDirPath requires
a QCoreApplication instance this leads to a qWarning, which in turn leads to a
recursive call to the logging initialization, and in turn to a recursive mutex deadlock.
Task-number: QTCREATORBUG-18031
Change-Id: Ic75e1e8c062eb647991725378489bf87c9648cca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Commit 288bfb0bbd added a test that uses QLineEditIconButton, which
requires QT_BUILD_INTERNAL to be defined in order for the findChild()
call to work as expected.
Change-Id: Ieda18f4e26a91322e8a83c14f8d1fbbe4313ecf0
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Fixes two separate errors. QImage::transform was incorrectly adding
colors to the color-table of the returned image when the converted image
would not be indexed, and qpnghandler was looking at non-empty color-
table instead of color format.
Task-number: QTBUG-43708
Change-Id: Ife14b6428ca65ac7d3a0b36a89a73e56d64586b4
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QLineEditIconButton currently draws a fully transparent pixmap in its
paintEvent() function, when the line edit is empty. This does not work
when there is another trailing QAction that is visible even when the
line edit has no text, as reported in QTBUG-59957.
To fix this issue, make sure the clear button is always the leftmost
button.
Task-number: QTBUG-59957
Change-Id: I8a4f96aae07856aa0e1053ebb338ba9bdf052a16
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Allows categorized logging before QCoreApplication has been created,
which otherwise would silently fail to output anything because the
category would never be enabled, despite QT_LOGGING_RULES being set.
Change-Id: Ia733105c5b6f28e22af511ced5271e45782da12b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Preserve the device pixel ratio in the various helper functions
and when drawing.
Task-number: QTBUG-60026
Change-Id: Ieac9360b00044b6aedd0d3e1ad6e3b16d436f20f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Initialize a deleter for a new object, created by
QSharedPointer::create(), only after the object is actually
constructed.
[ChangeLog][QtCore][QSharedPointer] Fixed undefined behavior when
creating an object with QSharedPointer::create() and its conscructor
throws an exception.
Task-number: QTBUG-49824
Change-Id: I07f77a78ff468d9b45b8ef133278e8cdd96a0647
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When tearing off either a non-scrollable multi-colume menu
or a scrollable menu, displaying the torn-off menu crashes.
The root cause is when the torn-off menu is created, the
tear-off menu's style, margins and other attributes are not
set to it. The patch is to ensure the torn-off menu has
the same attributes as the tear-off menu does and set the
torn-off menu with a correct menu size.
Task-number: QTBUG-24815
Change-Id: Icea45f149ea8792671af4a62e62cad6ee01a1f95
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Currently the contents margins and the menu paddings are not considered
for calculating the menu size, the positions and the size of tear-off
bar, scrollers and the positions of the menu items when scrolling the
menu, which results in the following problems when valid contents
margins and/or menu paddings are set:
- The tear off area is displayed in a wrong position. The mouse events
are not handled correctly in the tear off area. For example, when you
click in the tear off area, the menu should be torn off but nothing
happens
- For a multi-column menu, the menu width is not calculated correctly
- For a scrollable menu,
- the menu width is not calculated correctly
- the menu items are not displayed in correct positions
- the scrollers are not displayed in correct positions
- menu items are displayed on the area of borders and margins when
scrolling the menu
- the last menu item is not displayed above the bottom of the content
area when scrolling the menu to the end.
The changes are to fix the problems above.
Change-Id: I7931e1088dff0029f2d4825e2aa34b4e32fdccd9
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Seems like an obvious omission.
[ChangeLog][QtCore][QVariant] Can now convert QUuid to and from
QByteArray, not just QString.
Change-Id: Ib56ae86ca0c27adaf1e095b6b85e64fe64ea8d18
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When multiplying a QMatrix4x4 by itself, we were clobbering the very
matrix we read from. Employ read-caching to avoid this aliasing problem.
[ChangeLog][QtGui][QMatrix4x4] operator*=() now calculates the correct
result even if the RHS and LHS are the same object.
Change-Id: I8534d56cfdd62c336577125127f05173fcec2873
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
