The default has already been changed in the configure shell script,
but configure.exe needs the same change to be compatible with the
current NDK (which no longer contains the 4.7 toolchain)
Change-Id: Icd6474c3c9b9bbefbba5a1273a466c7ff099b7e0
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
On Linux, we will do a configure test to determine whether JIT should
be turned off when compiling JavaScriptCore in the QtScript module,
but this test is never run on Windows. The result was that JIT was
disabled on Linux and enabled on Windows, and compilation broke on
Windows.
Task-number: QTBUG-33780
Change-Id: I37991c6da98b35330c07c54f2a0b143d20780c91
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
sqlite cannot be supported as Windows phone is
missing the needed memory mapping functionality.
Change-Id: I20e89292b9c7802c7402e8095854b72a9f21e614
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
As a side effect, this fixes wrong line break in "Third Party Libraries" section.
Change-Id: Ie6510fa94626a1c586621948a4681efdcf61f8b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Windows configure does not have -device-option yet.
A hack for android already generated the
qdevice.pri. But it did this even if no android
was build, so merged the device-option with the
android generation of qdevice.pri. The qdevice.pri
is generated earlier in the configure steps than
before to match the linux configure and allow
to set device options before the config.tests
are run.
Change-Id: I753cf0d5eba1479792a685d6e1f5acb38b970893
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this adds the possibility to put the actual qt installation outside the
sysroot it is configured for. this makes it possible to install an
x-built qt without "polluting" the sysroot, which makes it possible to
have read-only sysroots, and multiple qt builds for one sysroot.
-prefix is the location within the sysroot as seen by the target itself,
and gets "burned" into QLibraryInfo in QtCore.
-extprefix is the location in the host file system and gets "burned"
into QLibraryInfo in qmake. if it is not specified, it defaults to the
sysrootified prefix, which is the previous behavior.
Task-number: QTBUG-26680
Change-Id: Ia43833c4e27733159afeb8c8b9b2d981378d0cd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
both variables are available class-wide anyway.
Change-Id: I97c13de9ead44638e9310b62f02d8cd1c910df94
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
well, not really - qt_parts.prf will still create one, but it will be
empty.
apart from being cleaner, this now finally makes it possible to load an
unconfigured qt source tree into qtcreator without random parts of the
tree being missing from the project explorer.
Change-Id: Ida7ee77ecb450af05bfa66106caf2067b02f1a7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This option is required to build qtmultimedia without
Windows Media Foundation backend. In this case,
a full DirectShow backend will be build instead.
Change-Id: Ib29ba81ca6cbb00b609cc97fab7da29e61d31d6d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
the built host tool may need to know what the target architecture is,
e.g. mkv8snapshot does.
Change-Id: Ie5b1f6a07fa082d212e7c5b54289de49fd74dbcf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
because of popular confusion.
the packaging scripts now need to use -no-compile-examples explicitly.
Task-number: QTBUG-32449
Change-Id: Iecab1f345afe21e540204fe69a2292ef932cbb61
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Add mkspec win32-msvc2013 and make VS 2013 known to configure and
qmake.
Change-Id: I6e63a4d679727a8a3f068f377956185996d72bce
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
A previous commit (7582bb5) added a line to disable xkbcommon
when building for Android. A similar line needs to be added to
handle QNX builds.
Change-Id: I34e91d989567b17e7e21b87d9c377360e4e56f68
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
shifts the makefile generation one directory level up.
this allows the top-level configure to leave the makefile creation
entirely to the qtbase configure.
this is not very clean modularization-wise, but consistent with -skip.
Change-Id: I7ee2d2f29f2e6619d61fe9b55faa0bacdf3c44c1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's already done by the working directory.
the unix configure already did it that way.
Change-Id: Ia88d0877a2e24bc40a7083c2164982dec47f913b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the directory is sufficient nowadays.
the unix configure already did it that way.
Change-Id: I887e5ad594aef1f7bf5f4f92a6bdf0a13e4d0372
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead, use the files directly from the source dir.
Change-Id: I03b728c66de6e03cade6dc153dcc78cea8e3f606
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead, teach qmake to use the mkspecs dir from the source dir as well.
Change-Id: I9edac11f8997fcb0594d0a67419d4733dd4ed86b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
amends 0a1b89bff, which took care only of the unix version.
Change-Id: Idb82881a9c47e67c973500721fd499bcf41a848b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
A top-level vcproj (really a .sln file) only makes sense when sub-
projects are generated too, since the solutions generator will ignore
all non-generated projects.
Originally-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Change-Id: Iff09279d5760b5114a4cfb9b58ad677f2f69fa58
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the logic in the configures was even trying to express that, only that
nowadays we always ship syncqt, so the tests were kinda pointless.
this frees us from the perl dependency for non-developer builds of
packaged modules (except for webkit, which needs almost every scripting
language on earth anyway).
obviously, this requires that the packaging scripts run syncqt in the
source dir before tarring up the sources. note that for repositories
other than qtbase, the -version argument needs to be passed to syncqt.
Task-number: QTBUG-29465
Change-Id: Ic929ab17a5de4b30fbf48b3aa9bfa3b4d2ef37d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this avoids that syncqt needs to forward to a yet unexisting file (which
will have a yet unknown location, when syncqt is run at packaging time
already).
the %inject_headers syncqt config variable remains, so it can be told
not to purge "foreign" files.
Change-Id: I127ff6e0b7d5702fb0acaee9a5b7940b482d3608
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this overrides the magic that makes examples only install their sources
in production builds.
packagers may want to force the build of the examples, so they can
package them up for demo purposes.
this is actually why we formerly had the split between demos and
examples ...
Task-number: QTBUG-30788
Change-Id: I5633f69404c5aa6846f5496e8f161a273a7a7da3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
