Calling Q[Multi]Hash::reserve(n) when n is much smaller than the
current amount of elements in the hash, could result in an infinite
loop, because at some point the algorithm could not find a free bucket
for the element.
Fixing it by returning early if the new desired capacity is less than
current.
Fixes: QTBUG-102067
Pick-to: 6.3 6.2
Change-Id: I38ef0b2168c4e2a317eedf91b2155b1fdffb1c27
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Different platforms and drivers hae different defaults, so make sure
to request what we need.
Pick-to: 6.3 6.2
Change-Id: I54ae6e0770fea53fbf59c86d7e55aa5897292b67
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
QList and QString had them, so add them to QByteArray and
QVarLengthArray, too.
In the QVLA case, we need to jump though a hoop or two to avoid having
to duplicate all the reallocation logic. Nothing a few template tricks
cannot solve.
[ChangeLog][QtCore][QByteArray] Added resize(n, ch) overload.
[ChangeLog][QtCore][QVarLengthArray] Added resize(n, v) overload.
Fixes: QTBUG-102270
Change-Id: I0d281ae5b574f440f682e4a62427b434dcf5b687
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On 32-bit platforms, the range of qsizetype is smaller than the range
of the qint64 used as a parameter in seek().
When seek()ing beyond the current buffer's size, the old code relied
on a write() to fill the gap with NUL bytes. This has two problems:
First, this may allocate a huge amount of memory just to find that it
cannot write that much, possibly even taking the program down when the
allocation in the QByteArray ctor fails, instead of returning false from
seek().
Second, the QByteArray ctor to which we pass the gapSize only takes
qsizetype, not qint64, so we were writing data of size gapSize mod
(INT_MAX+1) on 32-bit platforms, which may succeed, just to find that
that wasn't the number of bytes we expected to be written. By that
time, however, the internal buffer has already been enlarged.
Fix by checking whether the desired seek position is within the limits
that QByteArray can contain early on, before attempting to construct
such a large QByteArray.
[ChangeLog][QtCore][QBuffer] Fixed silent data corruption on 32-bit
platforms when seek() fails due to position > INT_MAX.
Pick-to: 6.3 6.2 5.15
Fixes: QTBUG-102274
Change-Id: Ib63cef7e7e61ef8101a5f056c7b2198bb7baa228
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_qmessagebox was disabled because it crashed.
It does not any more. Now it hangs, which
is a new problem.
Fixes: QTBUG-87671
Task-number: QTBUG-101217
Pick-to: 6.2 6.3
Change-Id: Iec15cf82a4112ee79182ec091622e40147bd3e7f
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
We want to enable gaining access to the underlying resource(s) by
inspecting a QRhiRenderTarget. This is not currently possible for
swapchains since there is nothing that references the actual
QRhiSwapChain. To clean this up, make an explicit, new
QRhiSwapChainRenderTarget subclass. Thus the logic already used in a
couple of places to examine the resources attached to a
QRhiTextureRenderTarget can now work with swapchain render targets too,
by branching based on the resourceType().
This eliminates the somewhat odd setup where a "RenderTarget" resource
is QRhiRenderTarget corresponding (but not exposing!) a swapchain,
whereas a "TextureRenderTarget" is a QRhiTextureRenderTarget which
is a subclass of QRhiRenderTarget. Now we correctly have an (abstract)
base and two subclasses, one for each type of render targets.
Besides, it allows us to clean up the oddly named
Q...ReferenceRenderTarget classes in the backends, which initially tried
to indicate that this "render target" merely references (or, in
practice, is) a swapchain. We can now have a nice and symmetrical
Q...SwapChainRenderTarget and Q...TextureRenderTarget naming scheme.
Change-Id: Ib07e9be99a316eec67b94de0860e08f5f4638959
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QNX tests are run under QEMU so have the same problem as Ubuntu.
Pick-to: 6.2 6.3
Task-number: QTBUG-100928
Change-Id: Id7c7639b743062c777502e2ba8b28f9bb18deb19
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
In Qt 6, QByteArray can hold more than two GiB of data on 64-bit
platforms, so QBuffer should be able to handle writes of more than two
GiB, too. But the implementation didn't check for overflow and held
sizes in int variables, so it happily reported success but wrote data
only mod INT_MAX.
Fix by carefully avoiding overflow and using size variables of proper
type.
[ChangeLog][QtCore][QBuffer] Fixed silent data truncation when writing
more than two GiB at once on 64-bit platforms.
Pick-to: 6.3 6.2
Fixes: QTBUG-102171
Change-Id: Ib666f9f7db24495b4ed64191a48b35edc410f7e9
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This reverts commit b39d3cfe30.
Reason for revert: the test fails in dev again
Task-number: QTBUG-87404
Change-Id: Icc51e36e037e9c7e8154266def129dd8ad412775
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
To allow other cases to run while finding the reason. Most of these
cases fail only on CI and not locally.
Pick-to: 6.3 6.2
Task-number: QTBUG-102043
Change-Id: Ib552ab00b4232f6aabdf85acf050633251d9e71d
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Update docs and add tests.
[ChangeLog][QtCore] Documented existing support for 'F' format when
converting floating-point numbers to strings in QLocale::toString(),
hence equally for QString's floating-point formatting. Previously it
was supported but the documentation neglected to mention it; it only
differs from 'f' for infinities and NaN.
Change-Id: Ic946c0f7b9e86fdf512daa3124bea57fc664b34b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The testing of infinity and NaN somewhat duplicated existing tests in
tst_QNumeric and, in any case, belongs there.
Change-Id: I6b5d1ff9767daf8e4bbe0025d3efab3d74ed35de
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Replaces 0, 0.0, 1, 1.0 and 2.0 with zero, one and two constants of
the templated floating-point type, to avoid type-conversions which
might have meant the test only checked doubles, or similar.
Change-Id: Id9d4488f0cc7226b5b8958d2a204a76fe5ae469d
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Use the modern "portable" _clearfp() and _controlfp(), that work
regardless of the hardware MS is running on, rather than the
x86-specific _clear87() and _control87(); and move some defines into
the #if-ery context in which they're used, rather than defining them
regardless of whether they're used.
Change-Id: I13abf2c85525b1182b99bc2c366aadd6b5fc656f
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Instead of QSKIPing the whole test, ignoring what was already tested
Change-Id: Iced928ce1bce92b447c8698a9942973cb78b6c15
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Removed "explicit" keyword from constructors taking
(const char *, qsizetype) and (const char *, const char *).
Switched to using brace initialization for creating QLatin1StringView
in QtCore.
[ChangeLog][QtCore][QLatin1StringView] The (const char *, qsizetype)
and (const char *, const char *) constructors are no longer explicit.
Change-Id: I4f6760692e4df60fe4231e86a25f6ea03cd1bf82
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
When comiling with ubsan, GCC is being too restrictive and ignores that
'static constexpr char []' can never be nullptr. It tries to evaluate
the comparison with nullptr, and fails with:
error: ‘(((const char*)(& hello)) == 0)’ is not a constant
Disable the checks when compiling with GCC.
Fixes: QTBUG-101307
Pick-to: 6.3 6.2
Change-Id: I8322bb7cb326e06cd03b8b107c46a494c825087b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We have test cases that call setFont without a specified weight, in
which case we would end up parsing an empty string into a number,
giving a weight of 0. This weight would in turn result in the
thinnest font on the system, which presumably was not the intent.
We now use default sizes and weights (similar to the default QFont
constructor arguments) if we're missing those arguments to setFont.
Pick-to: 6.2 6.3 5.15
Change-Id: I5a96f08cfa1b9e4f1de5edee6bf69ddd46f0ce92
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Update a QDateTime benchmark to use QDate::startOfDay() when setting
up its lists of date-times in helper functions, and to use noon as the
moment in the day in a creation test. Also move creation of a QTime
outside the loop: we're testing speed of creation of QDateTime here,
not QTime (and were already using the most trivial QTime constructor).
Change-Id: I26bf3369aae84a802ab03791f7341e107fede87c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The accessibility code for notifying focus changes related to a
table/tree view was iterating over all items to find the focused one,
which for a very large number of items could cause a major slowdown
and UI freeze. This patch avoids the issue by removing the loop and
implementing the focusChild() method in the table/tree accessibility
classes.
Fixes: QTBUG-100997
Pick-to: 6.2 6.3 5.15
Change-Id: I04c847a5e65223b7a93ab82363feb32e1ebab9f3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Accessibility tests were not being built on Windows as they were
depending on a WindowsUIAutomationSupport internal module that no
longer exists, as the UI Automation support classes are now in QtGui.
The patch also fixes a test that was calculating widget geometry
incorrectly on high DPI screens.
Pick-to: 6.2 6.3
Change-Id: Iefed0f6d147853484dfab4b16838b9088fd32dcf
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Two things are done here:
- use showNormal() instead of show() to get an expected widget size.
- skip the test if HighDPI scaling is enabled with non-integer scaling
factor, because there can be rounding errors.
Fixes: QTBUG-87390
Pick-to: 6.3 6.2
Change-Id: I653a17bac2142838b03a328e1629582384b6c7b3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
And replace them with more descriptive versions
Change-Id: I3d5256072a5bbe0919a08b800877aa9b6a305a0b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Two methods of the private class used to take a QByteArray with from
and to indices into it, for where to start and stop a scan. Now that
they take a QByteArrayView, those parameters can be used by the caller
to shorten the view to the desired portion.
Change-Id: Id1586afb87a9e8a189b69e485278375ff504fb7b
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Skip the crashing case temporarily to allow other tests to run
while finding a fix.
Pick-to: 6.2 6.3
Task-number: QTBUG-100470
Task-number: QTBUG-102043
Change-Id: I8b16f95e5c66b95cc9959494b5317d39d58194e6
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Adds docker support and makes it no longer skip the whole test
if there is no docker or network server.
Pick-to: 6.2 6.3
Change-Id: Ie98496df338a804d5c9842cce372e3410fdf9990
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Currently test relies solely for external test server. This makes it
not possible to run test successfully with environment where docker is
used.
Pick-to: 6.2 6.3
Change-Id: I51f4f48a80c1be8dd24359fe24d9cbfd471d2195
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Android uses its own implementation of QNetworkProxyFactory, so the
test of a generic implementation will never be working there. The
"http_proxy" environment variable is simply ignored in Android's
implementation.
Fixes: QTBUG-87385
Pick-to: 6.3 6.2
Change-Id: I3c24e3481b70872d332310aa86c68adad9c2b7e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- Use QT_ANDROID_EXTRA_LIBS to correctly deploy libraries on Android.
- Update the test code to use application libraries directory
on Android.
This allows to enable the test for Android in CMakeLists.txt
Task-number: QTBUG-87438
Pick-to: 6.3 6.2
Change-Id: Ib74da036472320736888052b63a45ca50431de48
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
On Android we demand the libraries to always start with "lib" and
end with ".so" extension. Also Android does not support versioned
libraries.
This patch updates CMakeLists.txt to fulfill these requirements,
and also omits some unsupported test cases.
This allows to enable this test for Android in CMakeLists.txt
Task-number: QTBUG-87438
Pick-to: 6.3 6.2
Change-Id: Iec30acdefe00c471acc7139cd255b3389e31d22b
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Previously, only the first B?XFAIL would be reported, all others would
be discarded. Furthermore, if a B?XFAIL had happened, B?PASS was also
not reported, since the B?XFAIL served as test line. However, if the
B?XFAIL was followed by a SKIP, B?XPASS or B?FAIL, these were reported
as normal, producing exactly the kind of duplicated test line that the
skipping of B?PASS was meant to supply.
So change B?XFAIL to be reported among the messages, but retain the
TODO annotation of the first on the test line of a subsequent B?PASS,
if nothing more drastic happens in the mean time. So now more than one
B?XFAIL can be reported, the test is still marked as a TODO and we
don't get duplicate test lines for a subsequent non-passing result.
This replaces the bool m_wasExpectedFail member with a QTestCharBuffer
m_firstExpectedFail that records the first XFAIL's TODO line (so its
isEmpty() fully replaces m_wasExpectedFail).
Previously, the at/file/line information for a B?XFail would be
supplied as top-level keys in the YAML block for a "Pass" reported as
not ok due to the XFail, as this location information is now part of
the B?XFail's message in the extensions/messages block. Duplicating
the first B?XFail's location at top level would add complexity and is
arguably misleading, as the test result is really a pass (after
ignoring known issues), and the location of the pass is indeterminate
(nominally the end of the test function, but actually also after the
cleanup() call for this test, when relevant), which is why a Pass has
no location information.
Task-number: QTBUG-96844
Change-Id: Ib3f24f56266ff49bf3bc9759ac8263ac69a62130
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In the process, split it from its comments block and don't bother with
a YAML block if it would only have contained comments.
Task-number: QTBUG-96844
Change-Id: I08c20f796252bb270ba9caa4c055cdcc0843a88b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The ASN.1 parser for a date-time had to check the date-time string was
all digits to catch the case of a sign in the month field, which used
to be accepted when it should not be. That bug has now been fixed, so
remove the work-around and add a second date-time test-case, renaming
(and modernising) the existing one for consistency.
Task-number: QTBUG-84349
Change-Id: I649c5129312b6865af08b22ba6893cb4e29243f8
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Commit a35a7fcb5a introduced the usage
of insets to correctly take into account the default Android status bars
and other reserved regions.
However in practice that does not work as expected - the bottom inset
is always reported to be non-zero, even when fullscreen mode is enabled.
To fix the issue, FLAG_FULLSCREEN is explicitly checked before applying
the insets.
Fixes: QTBUG-99624
Pick-to: 6.3 6.2
Change-Id: I8b25f0b06447cd452c42ef072493e3137e25f38b
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Fix some obvious issues, QSKIP or blacklist other problems.
This does not fix all the test failures, but allows to enable most of
the test cases, so that we could catch future regressions.
Task-number: QTBUG-87668
Pick-to: 6.3 6.2
Change-Id: I1ed0b476d4ac55c658c572cfa1379fcdc6137ee8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Do not try to properly specify a path to an external syslocale app,
because the related test can't be executed on Android anyway.
This fixes a failure in initTestCase() and allows to unblock other
test-cases.
Also skip systemLocale() test, because Android platform plugin already
creates a custom QSystemLocale instance, so a hack with MySystemLocale
does not work.
As a drive-by: simplify the #ifery in initTestCase() and remove an
unused second parameter of QSKIP() in emptyCtor_data().
Fixes: QTBUG-87414
Pick-to: 6.3 6.2
Change-Id: Iefc587062362469856fdca77f9ec9d96f5552e45
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The tests started failing for some reason, so blacklist them to
unblock the CI.
Task-number: QTBUG-102095
Task-number: QTBUG-102096
Change-Id: I3e0667581bb1a9fd08dedcdab08878b1f738ac92
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When producing a diagnostics block, include the file and line
information, if we have it, to describe it. This presently only adds
this information for skip, but could in principle do the same for a
B?XPass.
Task-number: QTBUG-96844
Change-Id: I6cc375d98e2369eba262010f9c2dfbcba931a6f1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Our TAP output was delivering messages as comments before the test
line, where TAP clearly expects the details of a test to follow its
test line. Version 13 provides a YAML block to deliver diagnostics and
encourages use of this, so accumulate our messages in a
QTestCharBuffer instead of emitting them one by one.
However, messages produced after a test has produced its test line
belong to that test, but are too late to be included in its
diagnostics block, so should be emitted immediately as before, albeit
now with a type prefix. This at least separates such messages, from
the end of one test, from messages produced early in the next.
In the process, add a type-prefix to each, to make clear what type of
message it was. Since the Yamlish supported by TAP consumers doesn't
support a way to have many messages, use the extensions: top-level
hash tag with a messages: sub-tag to gather our messages as a list.
(This expands at least one expected output file significantly and
substantially rewrites some others.)
Add methods to QTestCharBuffer, and a helper function, to support this.
Task-number: QTBUG-96844
Change-Id: If44a33da5879ed1670ef0980042599afd516f9d2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Now when 71b3d18ea7 is merged,
we can re-enable the previously skipped tests, as they do
not crash anymore.
Task-number: QTBUG-101423
Task-number: QTBUG-101321
Task-number: QTBUG-87417
Pick-to: 6.3 6.2
Change-Id: I6b4b3619b0af5e48b5e92b514bc0ab6586a76d51
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The test was failing because test data was not provided correctly.
That was fixed in 4aea86f5e8 but the
test was never unblacklisted.
Fixes: QTBUG-87418
Pick-to: 6.3 6.2
Change-Id: Ibef7dcfaf59ef50f90d6538a562d03af17f065e0
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Needed for QNX, don't be overly specific with XcbUnix.
Pick-to: 6.3 6.2
Change-Id: I240313bc48d9d81d1f18f27ee11f7c9352e3e452
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@qt.io>
- Use QT_ANDROID_EXTRA_PLUGINS to specify a correct plugins directory
- Update plugin names on Android to match the expected format
- Add explicit dependency on the plugins, so that they always get built
and included in the APK
- Update the test code to respect the fact that plugins are packed
differently on Android.
All these steps allow to enable this test for Android in CMakeLists.txt
Task-number: QTBUG-87438
Pick-to: 6.3 6.2
Change-Id: I09e389c761688cea216d8922b94ea3a2600f7a67
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
