With C++20, there is a new iterator_category: contiguous_iterator, for
containers whose elements are stored contiguously in memory. In Qt 6,
QList satisfies this requirement.
However, we still need to tell the standard machinery about it. Step one
is to mark the iterators as contiguous_iterator; as that exists only in
C++20, we have to ifdef accordingly.
We also have to ensure that the iterators satisfy pointer_traits by
defining element_type due to how contiguous_range is specified. As this
runs afoul of LWG 3346, we check for known bad _GLIBCXX_RELEASE
versions.
Change-Id: I8c134544e694ba937e4d912393eb72fa75b49e3d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Add new configure option -make minimal-static-tests and CMake option
QT_BUILD_MINIMAL_STATIC_TESTS. In conjunction with QT_BUILD_TESTS
it will enable building a minimal subset of tests when targeting
a static desktop Qt build.
In qtbase the minimal subset includes all the auto tests of testlib,
tools, corelib and cmake. In particular this will also do cmake build
tests and qmake build tests (tst_qmake)
Adjust CI instructions to enable building a minimal subset of static
tests when a platform configuration is tagged with the
MinimalStaticTests feature.
Fix and skip a few tests that were failing.
Pick-to: 6.1
Task-number: QTBUG-87580
Task-number: QTBUG-91869
Change-Id: I1fc311b8d5e743ccf05047fb9a7fdb813a645206
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This commit amends 4ceaf22bed.
Signal parameter was not actually used, even is the signal was
specified.
This patch fixes it and also introduces unit-tests for this issue.
Change-Id: I029d413644eb6a72af3bdce27cc5f5bcadfe946a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Currently, QThreadPool's generated threads inherit the priority from the
thread they are created and that cannot be changed. This merge request
adds a property to QThreadPool so that the priority of the threads can
be different.
The default behavior does not change.
[ChangeLog][QtCore][QThreadPool] QThreadPool can now be configured to
use a different thread priority when creating new threads than the one
it inherits from the thread it was created in. This will only apply to
the threads started after the property is changed.
Fixes: QTBUG-3481
Change-Id: Ic98d4312d055a3357771abb656516ebd0715918d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is no need to write emit and notify at the same time, as not
emitting after notify does not make sense.
This naturally only applies to properties with a changed signal.
Change-Id: I99ff7863a509262ad9d4f7c9c5afbc66fd37001c
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
For QObjectCompatProperty, which allows to do basically anything in its
setter, it is actually easier to manually specify when the change should
become visible. This is in line with manually writing emit calls in the
old property system, and allows the preservation of class invariants.
Change-Id: I585bd3f25d722ca3fd721ead85fe73dbee26c5f6
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Compilers are catching up, so some #if 0 codepaths can now be
conditionally enabled.
Change-Id: Ia9e87a096bc2ae4789ab390a9170d9c1eb9690d6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This check doesn't really do anything useful anymore: QStringLiteral
is used in Qt without any extra QT_NO_UNICODE_LITERAL #if-ery
Additionally, clean the related (and outdated) comment in
{QString, QByteArray}::literals()
Change-Id: I65b1eac33c5470508997be24f9ba6cf56d8578ea
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Q_CC_GNU is defined on compilers that masquerade as GCC (Clang, ICC),
so using it to work around GCC-specific bugs is wrong. Introduce a
local define for _only_ GCC and use it in place of Q_CC_GNU.
Drive by: version-fence a test we now know it's been fixed upstream,
and correct the link to the corresponding bug report.
Pick-to: 5.15 6.0 6.1
Change-Id: I9059d6e6bf86157aca71590ac22afb1a1c114313
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This function returns the metatype corresponding to the metaobject, or
an invalid metatype for namespaces.
This works as follows: First we increment the metaobject revision for
new metaobjects. Metaobjects with older revisions are handled by doing a
lookup by name. That fallback is also used for dynamic metaobjects (from
QtDBUS and those created by QMetaObjectBuilder).
For new metaobjects, we store the metatype in its metatype array, behind
the property metatypes. This avoids any changes to the property and
method metatype extraction logic: For properties, the metatype access
does not change, as the new metatype is after their metatypes. For
method metatypes, we already have an indirection layer (using offsets),
so by adjusting those offsets by one, the same logic keeps working.
To distinguish between namespaces and dynamic metaobjects, namespaces
store the metatypeinterface pointer for void in the metatype array,
whereas dynamic metaobjects store a nullptr.
One nice additional benefit is that this simplifies the generator logic
in moc, as the metatype array is now never empty.
Task-number: QTBUG-92077
Change-Id: Id3f920f28553f12032a71a1a87dad29e5374dbe7
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Fix operator checks for containers whose value_type equals themselves.
It does not make sense to recurse on value_type in that case. Thanks to
std::disjunction having short-circuiting semantics, we can avoid that
issue by checking first whether T is T::value_type.
As a drive-by, check for value_type typedef before checking for
begin/end in is_container. This works around an issue in gcc <= 8.1,
which fails to correctly SFINAE the case where begin and end are private
methods.
Pick-to: 6.0 6.1
Fixes: QTBUG-89456
Change-Id: I27305a7cfe050f13a279c07f00bc229c01daa25b
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Test we get the same starts of various days. Some coming changes shall
break some of these, but they should all be back to working by the
time we're taking account of DST before 1970 as well as after.
The first two or three test-cases work by accident in most zones, at
present, due to the zone-based code-path ignoring the LMT period
before the zone's first transition; but Europe/Helsinki had a renaming
transition in 1878, so does see its pre-zone offset between then and
the switch to UTC+2 in 1921, leading to failures in exactly the zone
Coin tests. So suppress these three test-cases pending later fixes.
On Windows, the next text (still pre-epoch) gets bogus zone data for
its LocalTime, so suppress that likewise.
Task-number: QTBUG-80421
Change-Id: I2264e0e436d92112b03264faa410e30057b8f73b
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
qtbug_xxxxx is a fairly ambiguous test name
Change-Id: I4b407160464c9b8300d3683549b0ede837161e7b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
MSVC generates the following for those tests:
warning C4996: '_open': This function or variable may be unsafe. Consider using _sopen_s
instead. To disable deprecation, use _CRT_SECURE_NO_WARNINGS. See online
help for details.
We need to set the define before any C runtime headers are included, so
do it right away, it doesn't do any harm on other compilers.
Change-Id: Ia25afb87934058c3f27e63820eeb2db063a627f1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
As QMultiHash uses a pointer for the data, nullptr dereference is a
thing, so check for valid d before doing anything in count()
Fixes: QTBUG-91704
Pick-to: 6.0 6.1
Change-Id: Ia20440cd7bdc03cb09c77f796fb9c5b52765eac5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code in qtdeclarative did not do anything at all anymore.
Change-Id: Idd97145cb74aeb4f43dfce2f282a765e90945073
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
There may be a race where e.g. thread 'B' is woken up by a queued invoke.
At the same time thread 'A' asks 'B' to quit, which will set various
atomics (some important ones are 'interrupt' in the dispatcher and
'exit' in the event loop), but it does _not_ try to send another wake
since there is already an unhandled wake triggered by 'B' itself.
Sadly 'B' reads the 'exit' atomic before 'A' updates it.
Then, slightly before, 'B' sets 'interrupt' back to 0, 'A' write 1 to
it, meaning 'A's interrupt is ignored. Then, since there is no
interrupt, 'B' goes back to waiting for events, leaving the thread alive
and running instead of quitting.
Maybe this has unforeseen consequences (one consequence is that it will
return and re-enter the event dispatcher once more, possible
unnecessarily)
Fixes: QTBUG-91539
Pick-to: 6.1 6.0 5.15
Change-Id: Ie6f861f42ffddf4817d5c8af2d764abe9d9103c2
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the source models don't have the same number of columns, the proxy
keeps only the smallest number of columns across all source models.
Afterwards, if a source model emits dataChanged in a column past
that number (a "hidden" column), the proxy needs to ignore it rather than
assert.
But also, if the source model emits a dataChanged signal across both
visible and hidden columns, then the last column number needs to be
adjusted so that the signal is correctly processed and forwarded.
Task-number: QTBUG-91253
Pick-to: 6.1 6.0 5.15
Change-Id: I939e8ec0faf41370472f86785851292e4372f72c
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The prior tst_QDateTime::setMSecsSinceEpoch(-1) testcase was the last
millisecond of 1969; which (deep in the relevant function) actually
uses time_t 0 (with the -1 ms offset taken aside to be put back
later); so add the matching -1 second test. At the same time, add +1ms
and +1s checks for symmetry.
Change-Id: Ib487305f6ad81b55563ea59926cae13fb1fde592
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Based on the discussion in https://codereview.qt-project.org/c/qt/qtbase/+/336742
changing our types from RELOCATABLE to PRIMITVE is fine.
Change-Id: Ica867203aa813d19fdfd3753fc4ff36ef4332fc3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test causes frequent failures in the CI. This is the most
subtle fix until it is properly fixed.
Pick-to: 6.1
Task-number: QTBUG-91423
Change-Id: I6499378dcd3ed1c31275db38d83b572e764366cc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Samuli Piippo <samuli.piippo@qt.io>
Before this change, the QMetaType for T const* where T is derived from
QObject would not store the static QMetaObject of T. This commit changes
this. As a consequence, the metatype system can now convert between
const and non-const pointers to QObject. Note that this allows casting
const away; but so does C++ with const_cast.
In addition, a new flag, QMetaType::IsImmutable is introduced, and used
to tag the metatypes of pointer to const types. This allows code to
discern between pointers to mutable and const QObjects, which is
relevant for the QML engine.
Task-number: QTBUG-82354
Change-Id: I3e4e4f39f565bd99a65e161528ce5304df73d6d6
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
After QPoint(F), it's now the time of QSize(F) and QVectorND,
which can be unambiguously decomposed.
[ChangeLog][QtCore][QSize] QSize is now usable in a structured
binding declaration.
[ChangeLog][QtCore][QSizeF] QSizeF is now usable in a structured
binding declaration.
[ChangeLog][QtGui][QVector2D] QVector2D is now usable in a
structured binding declaration.
[ChangeLog][QtGui][QVector3D] QVector3D is now usable in a
structured binding declaration.
[ChangeLog][QtGui][QVector4D] QVector4D is now usable in a
structured binding declaration.
Change-Id: I67bb152f4210f2be27607179cd2ec522174cc483
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When attaching a continuation with the default (QtFuture::Launch::Sync)
policy, it will be launched in the same thread where the parent has
been executing, or in the thread where the parent lives, if the
continuation is attached after the parent has already finished. Fixed
the test-case to make sure the continuations are attached while the
parent is still running, so that they can be resolved in the parent's
context.
Fixes: QTBUG-91373
Pick-to: 6.1
Change-Id: I82b3b0c47b76d121b44bd512659c08b3b474e351
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
In QTimeZonePrivate::dataForLocalTime(), mistrust the Android
backend's hasDaylightTime(), as it has a comment saying it only knows
about future transitions, not past. This caller of it really needs to
query "has ever had a transition", which this doesn't answer. Many
zones that have no plans for future transitions have had transitions
in the past; these were failing the transitionEachZone() test.
In the process, refine the test itself, making sure we catch some
quirk cases that shouldn't arise and making the debug message on
failure more informative (while eliding the zone name, as this is part
of the test name anyway, so added to the output by qDebug() itself).
Fixes: QTBUG-69131
Change-Id: I88a0528182c247acb8b6327b40516178e455bcc0
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We haven't used the spawn functionality on QNX since Qt 5.7 (commit
005a8bfbf0) because that's when we dropped
support for QNX 6.5.0.
Change-Id: Ic90d8429a0eb4837971dfffd1664f9712bdce2d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
And set *pid to -1.
[ChangeLog][QtCore][QProcess] If a startDetached() fails to start the
target application, the QProcess object should now have a proper error
string in errorString().
Pick-to: 6.1
Change-Id: Ic90d8429a0eb4837971dfffd1664e825ffcb923e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
That qWarning cannot be in the child process (we don't know if a user
logger is fork-no-exec-safe) and the failure to chdir() should be
reported as a failure in QProcess::startDetached() instead.
Change-Id: Ic90d8429a0eb4837971dfffd1664e7577c81610b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: David Llewellyn-Jones <david.llewellyn-jones@jolla.com>
I get a warning about the variable t_var being set but not used.
This patch fixes the warning.
Change-Id: Ib2df5ed2dddd283eb87f71a8b85951d1f67f04f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QTimeZone tests have some helper functions to test details of a
QTZP instance; these use QCOMPARE(), so may return early on failure.
The callers then need to notice the failure and, in their turn, also
return.
Change-Id: I0a188e9641ced70c9ffedd95e91f39681fad768a
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Its back-end lacks transition data, so the test can't possibly
succeed. Make the skip conditional on the tested zone having
transitions, so that the test will come back into play if we ever gain
support for transitions on Android.
Fixes: QTBUG-69129
Change-Id: Ie4f96601b8b18cd496efbde7cf2557875cf3c1c9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
A recent change ( a7ca8b1a28 )
led to failure of binding removal in setInterval().
This was fixed by introducing setterScope.
This patch add unit tests for this regression.
Change-Id: Ic8da1f2d82ad6c8ccd81c9b1eff72d42cf75f28a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Apparently we used to have (back in 2007, only on Windows,
incompatibly with what we were then using on Unix) a TextDate format
(only for QDateTime, QDate used what it still uses) that put the
day-of-month number, with a dot after it, before the month's short
name. We have retained parsing of this format, on all platforms, ever
since.
It no longer matches the format we now use (since 5.2, in 2013, commit
61b56a89a1, which harmonised the format
with Unix and QDate); now seems like a good time to stop complicating
our parser for its sake.
[ChangeLog][QtCore][QDateTime] The parsing of Qt::TextDate in
QDateTime::fromString() no longer supports the old TextDate format
used (only) on Windows by Qt < 5.2 ("ddd d. MMM yyyy" with an
"HH:mm:ss" time either appended or inserted before "yyyy").
Change-Id: I73a798ab78f187543e415119cc4a11f1cfd73820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since fromString() can't parse the (ambiguous at the best of times;
also backend-dependent and thus potentially system-locale-dependent)
abbreviations currently produced (since 5.9) and can parse UTC-based
offsets, the OffsetName of the zone is a more robust format for the
zone-suffix. This also makes it possible to consistently use the C
locale, compatibly with everything else about post-6.0 date-time
serialization.
[ChangeLog][QtCore][QDateTime] When spec is Qt::TimeZone, the
offset-suffix now used for the toString(Qt::TextDate) format is now a
UTC-based offset string, compatible with the parsing (now) supported
by fromString(). The zone-abbreviation suffix in use since 5.9 was not
parseable.
Change-Id: I4024ae87980c6d3590c68a67b8d1c8f433e36855
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
