A pending interrupt of a QEventLoop may interfere with
native runModal calls, resulting in Cocoa's main event
loop to be stopped unexpectedly.
After commit 9ab60b9c processEvents() no longer resets
the event dispatcher interrupt flag.
Add QCocoaEventDispatcher::clearCurrentThreadCocoa
EventDispatcherInterruptFlag(). Use it to clear the
interrupt state before calling runModal and variants.
Work around the inability to use platform API in
the print support code.
Change-Id: I52f26f99a63cbb46969db42f65b09a3c3119ad15
Task-number: QTBUG-56746
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
KDE will set the screen scale factors to 1 by default. Make sure
we don't turn off font hinting in that case.
Task-number: QTBUG-56797
Change-Id: Ieab18a7cfe4c1cb7087caab4d881932a4a991bc8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Adds a few missing parts of the conversion from QVariant to QJsonValue
after the introduction of the nullptr QVariant. The conversion the other
way is already implemented.
Change-Id: I8b25dec4b476c4761c5098a60944ff11c36f8bec
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The timerInfo list might get accessed concurrently and cause references
to become dangling. Hence, we need to protect usages with a mutex.
According to tests/benchmark there is no impact on performance.
Task-number: QTBUG-56756
Change-Id: I4bdffccff70d2dca99f4a39defad438afe571ada
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Commented its purpose and the guarded members for
readMutex.
Fixed places where guarded members were accessed without
using the mutex.
Use QMutexLocker instead of manually (un-)locking the
mutex.
Task-number: QTBUG-44357
Change-Id: I3049bb0df30f00659dc284c8e30ad7503c11e7c6
Reviewed-by: David Faure <david.faure@kdab.com>
The crossCompile test checked only if platform and xplatform are different
(which is the usual case), but in yocto builds cross compilation is done
by setting both platform and xplatform to the same target mkspec and using
host tools from -external-hostbindir.
Change-Id: Ib4ae3975a52196d9c0ad52b5b5e9ccd7c1bfe883
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This also allows us to enable auto-detection for it.
Change-Id: I7639ab533553f02e691e6f6b8cdd8dff19d91809
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
this actually affects only non-framework Darwin builds - debug-only
framework builds are impossible, and Windows is always debug-and-release.
Change-Id: Ia79dbbefc5750168ebd8967fe4afbe173f55a0d6
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
they were already omitted from the console output; there is no need to
spam the log with them (their completion was not logged, either).
Change-Id: I32c97413d2e6ceb18ee61356855cc6a7fa2222bf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
it's a bit pointless to state "(with debug info)" also for the default
build mode.
Change-Id: I99563c424752c735a3157776ef4fe5252ebd3900
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this option makes sense only when the default build is debug (regardless
of whether the release build is also enabled), as it overrides the
default.
Change-Id: I29f87430242a7d8239f13f0b33f6eebe098d9cf7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
they have none.
Change-Id: I1e5ffa9960c4fac3c708be4820fb40e7909569c8
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
it is counterproductive to clear the log when cached test results are
used, as that makes it hard to determine how they came to be.
-recheck isn't as clear-cut as -recheck-all, as only part of the results
is discarded, and we can't reasonably discard only part of the log. i
opted for clearing the log entirely, as having both the old and new
results in the log would be probably quite confusing.
Change-Id: Ibb391f2ba2ea86d73c23365d46cc66ed8a2158d6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the new configure system doesn't use this type of caching. also, it's
invoked via qt_parts.prf, which actually has the same call.
Change-Id: Ifa1e810e24330b59a1eb9f883eb0500642a212f3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this is much more intuitive, and actually produces a sensible result
with configure -recheck after a compiler upgrade.
Change-Id: Icfa0b85377d9fc014e66490c8ebf6c9236df978e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
use precalculated path instead of incorrectly assembling it from
scratch. it accidentally worked when the features happened to be in the
right order, as the iteration variable 'feature' from the calling
function was inherited. however, if the feature was accessed via
dependency resolution, things blew up.
amends 90eee08b3e, which presumably came to be this way due to a missing
adjustment to a refactoring.
Change-Id: I78b0acc0682cfc27a458df014ce14262a65c6241
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the regex didn't match the actual output ("icpc (ICC) 17.0.0 20160721"),
and the code failed to concatenate the lines (broken in 492d7d14fc, as
for clang).
but using -dumpversion (as we do for g++) is more elegant anyway, so do
it instead.
Change-Id: I328bbfab9c08d6e660c3f1ec51554d9f877b8f66
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Concatenate the multi line output from clang into one line before parsing
it. This got broken in 492d7d14fc.
Change-Id: I282d69932c5851f229213d7ef1ca6a78cd56c8c3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The plugin depends on AssetLibrary.framework, which is only
available for iOS.
Change-Id: I798c87b57881210ced8e4a7399c1e45d130ee357
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The plugin depends on AssetLibrary.framework, which is only
available for iOS.
Change-Id: Ic7b3c4ffb4d26808d2120e46593cb4e191e2c10b
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
We were throwing away important information by claiming that all
fonts support all the standard sizes in QFontDatabase on Windows
This caused the font dialog to list unsupported sizes for bitmap
fonts, unlike the native font dialog.
We would also claim to support creating bitmap fonts at
unsupported sizes, which would lead to
1. QFontInfo(font).pointSize() would return the requested size,
not the actual rendered size.
2. Bitmap fonts created at 64 pixels and higher would be invisible.
On Mac, there are no system bitmap fonts, and the use is not very
common, but installing some bitmap fonts on the system, it does
seem to ignore the sizes supported in the font and just displays
the standard list instead, so we keep the current behavior there.
[ChangeLog][QtGui][Text] Fixed list of supported sizes for
bitmap fonts on Windows.
Task-number: QTBUG-56672
Change-Id: Idbec2db9eb3381ab5ddf6259bd2befcba9b93564
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Pass qtConfLibrary_freetype test even when the .../freetype2 folder
is not found, so that freetype and fontconfig config.tests are run.
This fixes freetype detection on QNX, since the freetype headers are
located in the default .../include folder.
Task-number: QTBUG-56861
Change-Id: Ic8d72e6509195acd2d22a70603df850361f07b34
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the CI obtains them from the qt5 super repo nowadays.
Change-Id: I146e6a74763f32bee6651f427dd3664a1236ea0e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
By some unfortunate oversight, this enum was never registered.
Change-Id: I2227ccf294d2cf717187a3dcaaf4cbfacc4ac65d
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Commit 33d748bb8 (Allow granular synchronous and asynchronous delivery of
QPA events) replaced a postWindowSystemEvent() with a SynchronousDelivery,
which was completely broken, as the delivery is already guarded by a mutex
wait.
Change-Id: I929fddc4e3403f943e8fe0677b5a46bf58419575
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
I'm guess I introduced the regression in the commit
18ed6f20ad, which I wasn't sure about.
Change-Id: Ic46ff326a6ba46bc877cfffd14839f84fdf796e7
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
qiosfileenginefactory.h is now a part of the optional plugin.
Amends d7e49801
Change-Id: Ia1854145f54e4278ab5c0020361915f476d48cc9
Reviewed-by: Liang Qi <liang.qi@qt.io>
Partial Direct2D was added to recent versions of MinGW, which made the
config test pass but is not sufficient to actually build the plugin.
Check for IDXGISurface1 in addition.
Change-Id: Ie108f5735ceb0a44934429b0fd2213612ed28848
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In change ce2ae6ebd8 we added support for
hinted rendering to the DirectWrite engine. Previously, we would just
use the DirectWrite engine for all text rendering in high-dpi and assume
we would get only vertical hinting, but since the default changed, we
ended up scaling hinted text and the resulting text layouts were a mess.
Task-number: QTBUG-56841
Change-Id: I52101ea264878138de41878d1677c0ef8b522e78
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Make qmake understand the /DEBUG:FASTLINK option in QMAKE_LFLAGS, and
write the corresponding value correctly to VS 2015 project files.
Task-number: QTBUG-55591
Change-Id: I670375ed1523a5ab96bb3cce28635785564edba8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Check all places where we reallocate our internal data structure
and return a DocumentTooLarge parse error if we can't get enough
memory.
Change-Id: I006d0170d941837220c7dad0508571b68e2cbfd7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kati Kankaanpaa <kati.kankaanpaa@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
POSIX does not require that readdir() be reentrant even for operations
on different dirent objects, but all implementations (according to the
glibc documentation) already do that. Moreover, it's not a good idea to
use readdir_r since the buffer space is limited by the caller, so
certain file names may be too long (ENAMETOOLONG) -- we had a workaround
for QNX, but for no other OS. According to the glibc documentation, it
is expected that POSIX will mark readdir_r obsolete and instead require
some form of reentrancy for readdir.
This commit makes everyone use readdir instead. The macros in
qplatformdefs.h are left behind in case someone else is using them.
With glibc 2.24, we started getting:
qplatformdefs.h:150:35: warning: ‘int readdir_r(DIR*, dirent*, dirent**)’ is deprecated [-Wdeprecated-declarations]
qfilesystemiterator_unix.cpp:112:17: note: in expansion of macro ‘QT_READDIR_R’
Task-number: QTBUG-56088
Change-Id: I33dc971f005a4848bb8ffffd14749b4082f62e69
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
There are two enums called "Operator"
qdrawhelper_p.h:201:8: warning: type ‘struct Operator’ violates the C++ One Definition Rule [-Wodr]
qopengl.cpp:138:6: note: a different type is defined in another translation unit
Change-Id: I09100678ff4443e6be06fffd1482da1f636614b7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
GtkStock has been deprecated since GTK+ 3.10, and is removed in GTK+ 4.
Use the standard button names provided by Qt instead.
Change-Id: I55e8452178544b4a9ebf5c75b70f4c5c56c047f4
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
The blend_tiled_argb and blend_tiled_rgb565 was not correctly handling
widths larger than the buffer size. This patch adds the same pattern
used in blend_tiled_generic, which worked correctly.
Change-Id: Ie22c2a21d96cb0477cd0990bf01451ab907a4768
Task-number: QTBUG-56364
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
At the point in time when the callback is called it is very
unlikely that another thread sets the state or error of
the socket engine. Other members (readBytes, bytesAvailable)
are protected by readMutex.
Change-Id: I76cf12fbc9019d1b42846c4b40e0cd1c06bbb220
Reviewed-by: David Faure <david.faure@kdab.com>
As the list is changed inside a native callback
(handleReadyRead) which can be run inside another
thread it has to be protected by a mutex.
Change-Id: I145a866a36a12b7ea9bfa9f99ad9f7add872a021
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Commented its purpose and the guarded members for
readMutex.
Fixed places where guarded members were accessed without
using the mutex.
Use QMutexLocker instead of manually (un-)locking the
mutex.
Task-number: QTBUG-44357
Change-Id: I0d46f9592d5a9d1b52e73df961785a6f6c9e80be
Reviewed-by: David Faure <david.faure@kdab.com>
