Avoids polluting the global namespace
Change-Id: Ie01831ddac5446fdbdeefffd15468b5ca22d5e7b
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
[ChangeLog][Widgets][Dialogs] QFileSystemModel now uses
QRegularExpression internally for wildcard matching. Note
that QRegularExpression might not give the exact same
result as QRegExp as its implementation follows strictly
the glob patterns definition for wildcard expressions.
Change-Id: I6ca893833ff7b5b7f678221bb9bc623fd17c1cfa
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The match method still uses QRegExp. This patch updates the code to use
QRegularExpression and translates the wildcard patterns to a suitable
form for QRegularExpression.
[ChangeLog][Core][QDir] QDir now uses QRegularExpression internally for
wildcard matching. Note that QRegularExpression might not give the
exact same result as QRegExp as its implementation follows strictly the
glob patterns definition for wildcard expressions. Nevertheless, the
tests for QDir return the same results as before.
Change-Id: I095959443ac7362f7534e35454eff038061fca82
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
This patch refactors the wildcardToRegularExpression method to generate
a simpler regular expression. It also fixes some shortcomings of the
previous implementation.
Tests have been updated to ensure all cases are properly supported.
Change-Id: I454e3fe8fe0bb663b2f319d6fa2fa8aec626c50d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Deep down in CoreFoundation, ICU is used, and this test triggers a
heap-buffer-overflow with AddressSanitizer. Disable this test for macOS
until Apple fixes it.
Task-number: QTBUG-69875
Change-Id: I43e4a69708be8cde3bde87c57db21f5b717f96b8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We detect if there's an upcoming momentum phase using the same trick
used by e.g. Mozilla in their event handling: https://tinyurl.com/yd8lcs4l,
and as recommended by an Apple engineer: https://tinyurl.com/y8yytlgv
The event is not guaranteed to be in the queue, but in practice it seems
to be. If this assumption fails we can add a wait timeout to the event
search instead of using [NSDate distantPast] as a timeout (which only
looks at queued events).
When the momentum phase is detected, QWheelEvent::phase will have the
new ScrollMomentum value, and the phase transitions will be
ScrollBegin -> ScrollUpdate -> ScrollMomentum -> ScrollEnd.
We no longer send ScrollEnd to signify that the user's fingers have
been lifted off the trackpad; rather, the first event with ScrollMomentum
phase means that the fingers have been lifted and macOS is now sending
simulated-momentum events.
This means ScrollEnd is a reliable indicator that the entire scroll
gesture (both the user interaction and the momentum) has ended.
If the ScrollMomentum phase is skipped, it means the user's fingers
came to rest before being lifted, so there is no momentum. In that case
the transitions will be ScrollBegin -> ScrollUpdate -> ScrollEnd.
Task-number: QTBUG-63026
Task-number: QTBUG-65160
Change-Id: I80191a472f6fa892387004c199166a6350124274
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The layout/size hinting done in showPopup should not count towards the
mouse release blocking timeout as it might take more then the double click
interval itself, causing the popup to hide immediately on button release.
Task-number: QTBUG-67583
Change-Id: I37ac77ac331a4f865a9242581232b85606f883c5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QAccessible::StaticText should be mapped to AutomationControlType_Text
instead of AutomationControlType_Edit.
Change-Id: If8c840f0dea553c1a750225586778a7d24cf424a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Add both prefix and postfix versions of the increment/decrement
operators, and a static constexpr min/max which returns the
minimum/maximumm values that can be stored in the QSpecialInteger. These
latter functions are useful to define constants, e.g.:
typedef quint8_be IPv4_TTL;
static constexpr TTL_TO_DROP = IPv4_TTL::min();
Change-Id: I825a279feb68b93572765a9fdb5aa7b06d1be35b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Provides two convenient getter for a display name of the subject and
issuer. This simplifies cases where you just want a simple string
describing either of the two.
Change-Id: Ia5d0e058f14dae067b13ac7360e7fec4edd9ec53
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This is simpler than initializing a pointer to its address and
accessing it via that pointer; it saves the initialization and a few
checks that it's happened.
Change-Id: I3d82ee1cb02981654ec769632d3a055e11737113
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Having these 2 lines in a function does not add much value and
requires scrolling that could be avoided.
Change-Id: Ife814be6478521cd64b0048d1b6ee447afea55de
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
QXcbConnection::internAtom() creates the atom if it does not exist. The
lifetime of an atom is not tied to the interning client. Atoms remain
defined until server reset (lost connection, restart).
So create the atom once via QXcbConnection::initializeAllAtoms(), and
later fetch the atom value from local array, instead of repeating
InternAtom requests.
Change-Id: I3cae21895febad6e5daf8c32e72612202baaad64
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Several \fn commands are added for functions and operators that
were not documented. A few qdoc warnings remain in qcborstream.cpp,
but these are because an enum class was used, and qdoc doesn't yet
handle those correctly all the time.
Change-Id: I02a740c595e36c1b383af242c2a6419d1f37b135
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QAccessible::StaticText should be mapped to UIA_TextControlTypeId instead
of UIA_EditControlTypeId.
Task-number: QTBUG-69894
Change-Id: If2f8f55d2be492c02a3af5b1813ca12cf774a33a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Fixes a regression introduced with the update to the bidi
algorithm.
Task-number: QTBUG-69633
Change-Id: I7eac45ed3ffb41f89ea3f793eedcfb6fcdace871
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Don't show the mark simply because we have unicode code points
larger than 0x590.
Task-number: QTBUG-69665
Change-Id: I9af97383f3bcd52277a5288e7ad06ec240c7e51c
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Before this change, if you try to insert a row at the bottom of QSortFilterProxyModel
the row will be inserted in the source model at position proxy->rowCount rather
than at the bottom. This causes insert at apparently random positions in the source.
[ChangeLog][QtCore][QSortFilterProxyModel]
QSortFilterProxyModel::insertRows(row,count,parent) with
row == QSortFilterProxyModel::rowCount will insert at the bottom of the source model
rather than at the row QSortFilterProxyModel::rowCount of the source model
Task-number: QTBUG-58499
Task-number: QTBUG-69158
Change-Id: Ie78416c8fbc429303b8c9c98375630e3e4d85f6d
Reviewed-by: David Faure <david.faure@kdab.com>
After the behavior of setItemData has been changed following QTBUG-45114,
QStandardItemModel was lacking an interface to clear all the data from a single index.
Task-number: QTBUG-69616
Change-Id: Ide0b5bb6358439fc42c474df8b044fbace6def8d
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: David Faure <david.faure@kdab.com>
We can reuse the main QThread definition for the no-thread
configuration and avoid having to keep them in sync.
Add stub definitions for member functions where needed.
Change-Id: I128db11684a6040d09c4a4ce114f1399cba523f8
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Add it to configure.json and replace all occurrences of QT_NO_THREAD
with QT_CONFIG(thread). Add conditions for other features that depend
on thread support. Remove conditions where we can use the QMutex and
QThreadStorage stubs.
Change-Id: I284e5d794fda9a4c6f4a1ab29e55aa686272a0eb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Add implementation for the no-thread configuration:
Assume access will only happen from one thread and
use a QScopedPointer to hold the data.
Unlike the real implementation this version will
delete the stored data on destruction, as opposed
to on QApplication destruction.
Change-Id: I9d8e89e7da18f967f463e2db7b50549c962acc84
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Set data->threadId, which makes the thread detection
used by Qt::AutoConnection work: it will now actually
select Qt::DirectConnection.
Change-Id: I9369e47eb7ed3ec88dba25f2d41e92139958bcd7
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
When glGetError returns GL_CONTEXT_LOST, on XCB + Nvidia at least, the
error does not get cleared until the next successful
glGetGraphicsResetStatus.
We can't handle this properly until the start of the next frame where we
will hopefully have a valid context, but in the meantime we should avoid
locking up completely.
Change-Id: Id438d44d83b926e1f3e4281ca3704231bf1a23cf
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
qt_nameprep() already reset the string to its original length to
indicate failure, but we didn't handle that in qt_ACE_do(). So make it
have a return value whcih makes it easier to handle that case and do
handle it.
[ChangeLog][QtCore][QUrl] Fixed a bug that caused URLs whose hostnames
contained unassigned or prohibited Unicode codepoints to report
isValid() = true, despite clearing the hostname.
Change-Id: I41e7b3bced5944239f41fffd1545b7274c4b419d
Reviewed-by: David Faure <david.faure@kdab.com>
... which is Qt's version of std::make_index_sequence / C++14.
The current Indexes generator is recursing O(N) times which is reaching
recursion limits level for long IndexesList.
This implementation has only O(log N) recursion.
Change-Id: I423ef05152d77b18f1f5a64c49b273f49aa958bb
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's just adding the count of each half.
Change-Id: I9868946ceaf74002bde1fffd154b29908319007f
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The API originally proposed was flawed in the sense that the setter
function would use a modified version of the parameter given which would
have make it a black box for the user. This patch fixes that by removing
that setter and providing a static method that will return the pattern
suitably modified to be used by QRegularExpression the same way the
escape method does.
[ChangeLog][Core][QRegularExpression] Implemented support for wildcard
patterns through a static method.
Change-Id: I0054bcaffd7525dac569f54fa81f73b7e4544b2e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- the usage of 'handled' variable was a mess.
- remove "generic" from API names. The naming was probably influenced
too much from underlying C API (xcb_generic_event_t):
- handleGenericEvent() -> handleNativeEvent() to be consistent with QWindow::nativeEvent().
- dropped unnecessary 'long *result' from signature. It is useful only on MS Windows.
- genericEventFilterType() -> nativeEventType(), it *is* an event type, not a filter type.
- XCB_CLIENT_MESSAGE was not passed to QWindow::nativeEvent(), which is done via
HANDLE_PLATFORM_WINDOW_EVENT.
- minor: added some 'auto's where it makes sense and improved some variable names.
Change-Id: Id1c9896054e2dbd9a79bacd88394149c8cf2cdea
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
I've tried to reproduce the failures in the CI a couple of times now,
but it keeps passing. Let's leave some debug output in the test so
that if/when it does fail, we might know a bit more about why it does
so.
Task-number: QTBUG-69492
Change-Id: I5b39ac692e9026ce4b25cd13d342b11e061b777b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Nathan Collins <nathan.collins@kdab.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Neglected in 44b6757fe5
Noted the need for this in a relevant script's instructions.
Change-Id: If69666f1799acebd434034c80b91056cb8777488
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QtEndian's transformRegion_template() was getting a
signed/unsigned comparison warning when T was unsigned in a
QCOMPARE(T-value, 0); so use T(0) instead.
Change-Id: I78cb2ab96f79393def65ed2c020aa3039017ab92
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace lines of formatted output with dictionaries from which that
output can be generated efficiently (in sorted order). Tidy up the
python code, in the process.
Change-Id: Ifb74eb69342646c5dbabc3247b3a8ddef602e934
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The scripts that generate the C++ enum names clean out spaces, so
there's no need for enumdata.py to use the squished names; instead,
include spaces where they belong and use them in the relevant names
where they show up.
Change-Id: I7261c87d69e654bc2e89f44d7ebbc06bfb403c58
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That way, we'll get told all the cases that fail, rather than only the
first. Provoked by investigation of failures that turned out to be
caused by QTBUG-69875.
Change-Id: I8fa2902cbbcb307cbe1fdec2e7d8d6b0c3eb998a
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
It was added 558dd7f587
It was missed after 128a6eec06
Change-Id: I99f5c42ea45227bef08092e22d656e2d7d3cf60f
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
It's unclear what the original code was doing. It relied on 'm_release'
which could never be 'false' (ref. QTBUG-69679). It was subtracting event
times and comparing with arbitrary '10'. On X11 auto-repeat keys can be
detected by checking time and keycode of the current release event and
the next event in the queue. If an event is an auto-repeat, then next event
in the queue will be a key press with matching time and keycode.
Verified that auto-repeat was unreliable in Qt 4 as well. With this patch
auto-repeat works as expected.
Added support for Xlib's XPeekEvent in our XCB implementation QXcbConnection::checkEvent():
"The XPeekEvent() function returns the first event from the event queue,
but it does not remove the event from the queue."
Sneaking in one variable renaming: "string" -> "text", to match the QKeyEvent::text().
Task-number: QTBUG-57335
Task-number: QTBUG-69679
Change-Id: I0a23f138287f57eaaecf1a009bd939e7e0e23269
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
