There has been a latent bug forever in QtDBus that would make a signal
disconnect actually disconnect too much. The reason is that
disconnectNotify() is called every time a signal is disconnected from
a receiver, but that doesn't mean it was the last connection.
This test checks whether disconnecting from voidSignal() to our test
receiver will also disconnect from exitLoop(). If it does, we'll get a
timeout. I could have implemented it with two receivers, but in the
buggy case, it would always fail first in the timeout verification.
Change-Id: I5766d8a38594eb25e65b304913251303660fad41
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
OpenProcess + WaitForSingleObject is supposed to fail after the process exits,
but this seems to take some time until Windows notices.
Change-Id: I942a9b4a458c23fc4ac33b28386e28821128e991
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Change-Id: I8ecdda35912a95e69c2f8dd98ce9c41c77b222d2
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In Qt 4, QSignalSpy didn't *really* connect to the signal it was
spying on. See the "we need to connect the signal somewhere in order
for D-Bus to enable the rules" comments.
In Qt 5, it connects, which rendered this section of the test bogus:
since the signal is still connected, the QSignalSpy will notice that
fact and will not be empty. This is passing due to a false
positive. The upcoming fix breaks it, so we need to remove it.
Change-Id: Ic8fbf7d0e941403e97149f5bc392334a52c66ab1
Reviewed-by: Lorn Potter <lorn.potter@jollamobile.com>
Change the data type of PI from qreal to double, because qreal is defined as float and not as double on arm.
The testcase however expects PI to be a double value.
Change-Id: I003481071ecb2c1f54e6dcee9b450da2f1654969
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Laszlo Papp <lpapp@kde.org>
This should have been done right from the start,
instead we only made the documentation internal.
Also remove the classes from the BIC data.
Change-Id: I238a7a7cc5d26980b23931c78e7e5a4477d46920
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
While adding a test case for the new behavior, two issues
with the connectSlotsByName implementation came up:
1. for auto-connected slots that don't exactly match a signal,
a 'compatible' one is searched. There might be more than
one of those. The implementation randomly picks any.
2. The "No matching signal for %s" warning gets printed even for
slots that can never be connected via connectSlotsMyName
anyway (e.g. "on_something"). This is inconsistent.
This fixed both: an explicit warning is printed if more than one
'compatible' signal is found and the "No matching signal for %s"
warning is only printed if the slot adheres to the full
"on_child_signal()" naming convention.
In the process I added comments and changed the code slightly to
make it more readable and explicitly hint at non-obvious behavior.
Change-Id: Icc8e3b9936188d2da8dfff9f0373c8e5c776eb14
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Print out available information from QLibraryInfo, QStandardPaths,
QSysInfo, QPlatformIntegration, QStyleHints, QPlatformTheme
and QScreen.
Change-Id: Ia0bdc6174a1748c539acee18ba16a27a48d58ee5
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This allows finding a minimum particular version of Qt 5.
Change-Id: I96112f1be90f397ec60a2b233989ac0e0380bef9
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The problem was that the elapsed timer was not restarted,
causing the currentTime() not being adjusted for the time
it was paused.
Task-number: QTBUG-30108
Change-Id: Ib9b2c5a0dea52762109e0b25f1068dd7c88e15ba
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Adapt to API-changes, exclude network/SSL-tests for Windows.
Change-Id: I80d5ef1bd81e149a2f04fa7644376a8a88b1f7b9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Change-Id: Iea4905d802213848594d2ad0266696e5edb884f8
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
tst_QSharedMemory::simpleProcessProducerConsumer is on the top list of
unstable autotests. Disabling it for now.
Task-number: QTBUG-25655
Change-Id: Ib297b3382b736794bab6cdb668103bef74a55d8c
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
If the widget is larger than the screen,
its title bar top left corner will be shown
inside the screen.
Task-number: QTBUG-30142
Change-Id: Id93773874be3616b3ef4b9bee6e1bb751c541d7b
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
We do not currently have shared memory or system semaphore support
on Android.
Change-Id: I8e8f3fc6ff8d6de0333002c3e1b31cf070416dbd
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Android is not a proper Linux, and in particular it does not have
pthread_yield().
Change-Id: Ibf94cfacdc24d0c3baaef002c64f9f50c72c01d2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This broke the build on Android where fileno returns a short.
Change-Id: Ic8d32380078faeedcd22e785a912fede28251156
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
QMetaObject::connectSlotsByName(QObject* o) creates a list of all
children to look for signals that match slots of o. This changeset
simply adds the object o itself to that list.
The motivation is to finally fix the long standing QtCreator bug
QTCREATORBUG-6494. Where executing 'Go to slot...' and choosing
'accepted()' for a simple QDialog named 'MyDialog' will add a
on_MyDialog_accepted() slot to MyDialog. That slot never gets
connected. More details may be found in the linked QTBUG-7595.
Task-number: QTBUG-7595
Task-number: QTCREATORBUG-6494
Change-Id: I35f52761791af697eabb569adb5faee6fae50638
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Since we currently implement only half of the XEMBED protocol (we lack
the container part), we use a simple XEMBED container built with Gtk+
and PyObject. Using an interpreted language as Python helps us avoiding
a build dependency on Gtk+.
Change-Id: Ibc6282371c6f767e481c8a8ba2b5ca9cdd0d8b82
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
In case somebody uses QVector as a stack, it is not fair to have
takeLast, removeLast and pop_back to do way too much work.
This is still very slow compared to std::vector::pop_back
(mostly due implicit sharing), however it is more than a
factor faster than before.
Change-Id: I636872675e80c8ca0c8ebc94b04f587a2dcd6d8d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds takeFirst and takeLast which are functions
that QList also has.
Change-Id: I761f90b529774edc8fa96e07c6fcf76226123b20
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds the functions removeFirst() and removeLast().
Functions that QList has.
Beside making these functions, pop_back and pop_front are
redirected to these rather than calling erase.
Change-Id: Ifc5f8a78e33f436f06f21095a920ec5d4311fd6f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QKeySequence provides conversion to and from strings. But a similar
convenience was missing for QList<QKeySequence>. It would come in handy
when you want for instance to save/restore the shortcuts of a QAction.
Change-Id: I9e4f2001c58a595392a5019a57c564992c39bf88
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
I changed the existing test-case code to make it more scalable
in terms of adding more connectSlotsByName related tests. The
old "manual list of ints"-method was really not developer friendly.
This is a preparation for a subsequent modification of
connectSlotsByName behavior.
Change-Id: Ib760e52631ce4b5ae2a3ebdb4854849ff6c93bfe
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
We cannot access children directly, since that won't ensure that
the pending sort is executed. However, the functions we need are
there already and actually makes the code nicer.
Task-number: QTBUG-29903
Change-Id: I6899284275dd79b991896a5f08486b58d95f819d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This provides a fast multiInsert in QMap (and a fast insert in
QMultiMap) when providing a correct hint.
Change-Id: I3c864c3a7842765fe63f8ecb4b54d0e8c9fd22d7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds a fast insert on QMap when providing a correct hint.
Change-Id: I256bba342932c1d4f24c6e65074e1bf47b519537
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QSharedMemory and QSystemSemaphore are not available on QNX so the autotests can not be built.
Change-Id: Ibfb405f951d21342d64bf215cedc203a8cefe070
Reviewed-by: Wolfgang Bremer <wbremer@rim.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The former applies both on Mac OS X and iOS, but 'macx' is specific to
Mac OS X.
ios.conf and macx.conf now share most of their settings in the common
mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so
that any overrides in the device config will apply afterwards. This
means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK.
Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This avoids crashes accessing deleted memory when creating a QObject
after the last QObject had been deleted, like a qDebug() in global
destructors.
==41000== Invalid read of size 4
==41000== at 0x5F01ED5: bool QBasicAtomicOps<4>::ref<int>(int&) (qatomic_x86.h:208)
==41000== by 0x5F01309: QBasicAtomicInteger<int>::ref() (qbasicatomic.h:147)
==41000== by 0x5F24051: QThreadData::ref() (qthread.cpp:100)
==41000== by 0x614A984: QObject::QObject(QObject*) (qobject.cpp:681)
==41000== Address 0x6ee73f0 is 0 bytes inside a block of size 152 free'd
==41000== at 0x4A0736C: operator delete(void*) (vg_replace_malloc.c:480)
==41000== by 0x5F240BF: QThreadData::deref() (qthread.cpp:109)
==41000== by 0x6113F6B: QCoreApplicationData::~QCoreApplicationData() (qcoreapplication.cpp:268)
The comment right above the change in qthread.cpp looks eerily similar
to the problem I'm trying to fix. However, the actual change that
introduced the change is not in the Qt public history, so we can't
know for sure what the problem was then.
Change-Id: I0dba895b041fe6cf81e6f8939ca85035cd00aad1
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add setProgram() and setArguments() methods to the QProcess api.
Add a convenient start(QIODevice::OpenMode) method.
Move the implementation of QProcess::start() to QProcess::open()
unifying the QProcess api with other QIODevice subclasses.
Change-Id: Id1af57da05f750fe8d526d391589c05ee8037bca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
