Since 6.3 these use Qt::UTC as time-spec but I neglected to take that
into account in QDateTimeEditPrivate::init()'s construction of a
QDateTime from the QDate or QTime. This amends
commit c00ee2f310.
Fixes: QTBUG-105322
Pick-to: 6.3 6.4
Change-Id: I11dec9808a54cf7da401b1734a9a2812f5fd2e63
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change to match how QDateTimeEdit()'s overloads taking a QDate or
QTime work, substituting a default value in place of an invalid one.
This fixes one surprising anomaly in a recently-extended test, so that
it now only fails the way I expected.
Task-number: QTBUG-105322
Change-Id: Ied4da6160b7efe70990f956798fb826b5b36d8bb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The constructor_qdate() and constructor_qtime() tests only tested
QDateTimeEdit with a QDate or QTime. Extend them to also test
QDateEdit and QTimeEdit constructors, respectively. This revealed one
surprise; the QDateEdit constructor doesn't replace an invalid QDate
with the usual start-date, as the QDateTimeEdit does. It also serves
to reproduce a bug reported in Qt 6.3, see Task-number. These are
all marked XFail for now.
Task-number: QTBUG-105322
Change-Id: Ifafb40a9b78d9314b74ca9a1710d362b9a3cb18d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It makes no sense to pass, as parameters, values that can't vary
between test data rows, so eliminate m{in,ax}imum{Dat,Tim}e
columns. There were no parameters used to control how those would be
set, so they were always going to be the type's defaults.
The displayDateTime was only needed for the invalid test, in which its
value is known and fixed; for the normal test it was necessarily
implied by the parameter used to initialize the QDateTimeEdit. While
the QDate and QTime tests do have to supplement that construction
information, the other part is again known and fixed. We can check the
data-tag against "invalid" to determine which known and fixed data to
use, saving the need for a data table column.
Change-Id: I3754ba1a6a127a4a872a7f4a3e7edad9a5ff0ec0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We already had code to handle attributes on funtcions, but we didn't
handle them correctly for classes so far.
Fix this by simply skipping over the attribute.
Fixes: QTBUG-105310
Pick-to: 5.15 6.2 6.3 6.4
Change-Id: Ic4149f940e74820de4f2fa9540d9dc5b4e626a3a
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Added new setContent() overloads, that:
- take parameter of new ParseOptions enum type for specifying the parse
options that can be used for enabling namepsace processing and, in
future, whitespace-only text nodes, etc.
- use ParseResult for returning the information about error message,
line and coulmn number, instead of three parameters for each.
- use QAnyStringView for a QString input data.
To avoid ambiguities when calling setContent() with one argument,
removed the default argument for errorString from all the overloads.
[ChangeLog][QtXml][QDomDocument] Added new setContent() overloads that
allow specifying different parse options through ParseOptions flags.
These overloads use a new ParseResult struct for returning the
information about an error, and QAnyStringView for passing string input.
[ChangeLog][QtXml][QDomDocument][Potentially Source-Incompatible Changes]
setContent() overloads that take only one argument now return
ParseResult instead of a bool. ParseResult explicitly converts to bool,
so the expressions calling setContent() with one argument will continue
compiling, if they are contextually convertible to bool. If an implicit
convertion is required (e.g. bool b = doc.setConetnt(data)), the result
needs to be explicitly converted to bool first
(e.g. bool b = bool(doc.setConetnt(data)).
Task-number: QTBUG-104507
Change-Id: If6a78f8c9b1458f0e3ae719bfd3703a0b965449c
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When tst_QDateTime::fromStringStringFormat_localTimeZone_data() skips
due to feature timezone being undefined, it should report that as the
issue, rather than claiming the system doesn't support the particular
zones used in the test.
Change-Id: I9837ac95c6d92317fbec7fcca184f7b7e6f81441
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also document the (seldom helpful) handling of over-long repeats of a
format. Add test to QDateTime and amend QLocale test.
[ChangeLog][QtCore][QDateTime] Doubling the 'z' format in a date-time
or time format string now produces the same output as a single 'z'.
Previously, this would have produced two copies of the milliseconds
field (eliding any trailing zeros in each). Contrast with 'zzz', which
produces the full milliseconds field, including any trailing zeros.
Change-Id: I4c60462b062fee4079370096d745c191c1939506
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Microsoft recommends to use CoInitializeEx()
and SetWindowLongPtr()/GetWindowLongPtr() in new code.
Use COINIT_DISABLE_OLE1DDE to avoid overhead of
initializing and using obsolete technology.
Pick-to: 6.4
Change-Id: I9d16943e864d4487dd4f46fd9325579c298c52b9
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Add an option to limit the number of tests for building and testing
Android multi-ABI configurations in CI. Currently only Core tests
supposed to run.
Change-Id: Ibb8a41d60d108259ef2675ec54bde2482f87c8b2
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The rewrites in a1c34d8bd0,
0f76e55bc4 and in commit
b73ab954df didn't do this right, though no
problem ended up happening. In particular, the constructor one failed to
check if there were even more parameters.
Change-Id: I6f936da6f6e84d649f70fffd1706f827ba635584
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Commit 3695b35dfc accounted for pointer to
other incomplete types, but pointer-to-void was missed. This caused an
inconsistency in the stored metatype for void*, which is a built-in type
(QMetaType::VoidStar) but no pointer was recorded.
The test in tst_moc hadn't been enabled because the functions in
questions weren't extracted by moc. That is fixed in this commit.
Change-Id: I6f936da6f6e84d649f70fffd1706f613517a75fb
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
...by removing the entire adjustedFormat() helper.
Qt Quick has never used this, which indicates it is not that
useful. Same goes for Qt Multimedia or Qt 3D. Ensuring depth and
stencil is requested is already solved by using
QSurfaceFormat::setDefaultFormat() or by adjusting the formats
everywhere as appropriate.
The helper function's usages are in the manual tests that use it as a
shortcut, and in the GL backend itself. Remove it and leave it up the
client to set the depth or stencil buffer size, typically in the
global default surface format. (which in fact many of the mentioned
manual tests already did, so some of calls to
window->setFormat(adjustedFormat()) were completely unnecessary)
By not having the built-in magic that tries to always force depth and
stencil, we avoid problems that arise then the helper cannot be easily
invoked (thinking of widgets and backingstores), and so one ends up
with unexpected stencil (or depth) in the context (where the GL
backend auto-adjusts), but not in the window (which is not under
QRhi's control).
It was in practice possible to trigger EGL_BAD_MATCH failures with the
new rhi-based widget composition on EGL-based systems. For example, if
an application with a QOpenGLWidget did not set both depth and stencil
(but only one, or none), it ended up failing due to the context -
surface EGLConfig mismatches. On other platforms this matters less due
to less strict config/pixelformat management.
Pick-to: 6.4
Change-Id: I28ae2de163de63ee91bee3ceae08b58e106e1380
Fixes: QTBUG-104951
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Problem description:
--------------------
Assume we have two properties, P1 and P2. Assume further that we assign
a binding to P2, so that it depends on P1. Let the binding additionally
capture some (non-QProperty) boolean, and only create the dependency to
P1 if the boolean is true.
The state afterwards is
P1:[p1vaue|firstObserver]
|
|
v
---[p2binding]
/
P2:[p2value|binding]
If the boolean is set to false, and P1 changes its value, we still
correctly re-evaluate the binding and update P2's value. However, during
binding evaluation we will notice that there is no further dependency
from P2 on P1, and remove its observer.
The state afterwards is
P1:[p1vaue|firstObserver=nullptr]
---[p2binding]
/
P2:[p2value|binding]
Then, during the notify phase, we traverse the observer's again,
starting from P1's firstObserver. Given that it is nullptr now, we never
reach P2's binding, and thus won't send a notification from it.
Fix:
----
We store a list of all visited binding-observers (in a QVarLengthArray,
to avoid allocations as long as possible). After the binding evaluation
phase, we then use that list to send notifications from every binding
that we visited. As we already have a list of all bindings, we no longer
need to recurse on binding-observes during the notification process;
instead, we only need to deal with static callbacks and ChangeHandlers.
The pre-existing notification logic is still kept for the grouped update
case, where we already have a list of all delayed properties, and should
therefore not encounter the same issue. Unifying its codepath with the
existing logic is left as an exercise for a later patch.
Fixes: QTBUG-105204
Task-number: QTBUG-104982
Pick-to: 6.4 6.3 6.2
Change-Id: I2951f7d9597f4da0b8560a64dfb834f7ad86e757
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sami Shalayel <sami.shalayel@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
We pass a pointer to uninitialized memory to QMetaType::create().
There's no harm because we're using the invalid QMetaType, but GCC is
actually right to complain for any other type.
qtestcase.h:54:25: warning: ‘buf’ may be used uninitialized [-Wmaybe-uninitialized]
qmetatype.h:454:11: note: by argument 2 of type ‘const void*’ to ‘void* QMetaType::create(const void*) const’ declared here
Pick-to: 6.3 6.4
Change-Id: I3859764fed084846bcb0fffd1703eb7967acf0d7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QRegularExpression::match (and globalMatch) is currently overloaded
for QString and QStringView. This creates a subtle API asymmetry:
QRegularExpression re;
auto m1 = re.match(getQString()); // OK
auto m2 = re.match(getStdU16String()); // Dangling
This goes against our decision that every time that there's a possible
lifetime issue at play, it should be "evident". Solving the lifetime
issue here is possible, but tricky -- since QRegularExpression
is out-of-line, one needs a type-erased container for the input
string (basically, std::any) to keep it alive and so on.
Instead I went for the simpler solution: deprecate match(QStringView)
and introduce matchView(QStringView) (same for globalMatch). This
makes it clear that the call is matching over a view and therefore
users are supposed to keep the source object alive.
Drive-by, remove the documentation that says that the QString
overloads might not keep the string alive: they do and forever will.
[ChangeLog][QtCore][QRegularExpression] Added the matchView()
and globalMatchView() functions that operate on string views.
The match(QStringView) and globalMatch(QStringView) overloads
have been deprecated.
Change-Id: I054b8605c2fdea59b556dcfea8920ef4eee78ee9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the QMetaMethodPrivate::invokeImpl() function we added in the last
commit, without recreating the method signature. Instead, only do a
comparison on the method name and allow invokeImpl() to decide whether
this method can be called with the given arguments. This will allow
invokeImpl() to have more flexibility in deciding if the arguments match,
using the stored metatype information.
Change-Id: I36b24183fbd041179f2ffffd17021a86484bfab6
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This adds an internal method to QMetaMethodPrivate to do the work of
actually placing the call on a given meta method. This rewrite should
make the code clearer, but make no otherwise perceptible difference in
behavior.
The next commit will rewrite QMetaObject::invokeMethod to use this new,
internal function to avoid doing a lot of string allocations.
Change-Id: I36b24183fbd041179f2ffffd170219c0deaaf7f5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The certificate was updated recently and doesn't have the same
deprecated hash functions and small key size as the old one did.
Change-Id: I301ad50a96a30483b92a6e30f61e78e8d6b955ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This is in use in tst_qdbusinterface.cpp, so let's have it here to make
sure it works:
QVERIFY(QMetaObject::invokeMethod(&iface, "ping",
Q_RETURN_ARG(QDBusVariant, retArg),
Q_ARG(QDBusVariant, arg),
Q_ARG(QDBusVariant, arg2),
Q_ARG(QDBusVariant&, retArg2)));
Change-Id: I36b24183fbd041179f2ffffd170271424c048292
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We should fail to even find the method. `QString' and `QString&` are not
compatible.
Change-Id: I36b24183fbd041179f2ffffd170259bcf07fd459
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The type MyUnregisteredType needs to be only forward-declared for the
trick to work. The issue is not about registration, because since commit
fa987d4441 ("MetaObject: Store the
QMetaType of the methods"), we will record the meta type of the type
anyway, which will eventually allow the meta object to actually find
this type.
Instead, the tests are valid for a type that is only forward-declared.
Change-Id: I36b24183fbd041179f2ffffd1702182746f7c1b2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
In one of the three calls to customConstruct() -- QVariant::detach() --
we've already checked that the type is valid, so don't re-emit the
warning there.
Change-Id: I3859764fed084846bcb0fffd1703a3c7c0fb3164
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We can implement the trivial {default,copy,move} construction outselves
inside qmetatype.cpp and qvariant.cpp, simplifying the QMetaType
interface object, removing up to three relocations per QMTI.
This adds the testing for QMetaType::isXxxConstructible and
isDestructible that couldn't be added before.
Change-Id: Ic44396b31ba04712aab3fffd16ff0a28f541d507
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This also rewrites QMetaType::id() on top of the helper, with the benefit
of calling a member static function, so QMetaType doesn't need to be
spilled onto the stack. In some upcoming changes I need to ensure that
QMetaTypes are registered so they can be found by name and I'd like to
have a dedicated function name for that, instead of calling .id().
Since I needed to add docs for the new function, I've updated for the
old one too.
[ChangeLog][QMetaType] Added QMetaType::registerType() and an overload
of qRegisterMetaType() taking QMetaType (the two functions do the same
thing). These two functions ensure a given QMetaType is registered with
the Qt global registry, so they can be found by name later. Using
qRegisterMetaType<T>() also accomplishes the same thing, but is slightly
better for completely generic code because it will avoid emitting the
registration for built-in types.
Change-Id: I3859764fed084846bcb0fffd170351d606034c22
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
It's not registered until an ID is assigned.
Pick-to: 6.4
Change-Id: I3859764fed084846bcb0fffd17034f5b369c5b4d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The cause is that the first EXPOSE event comes with the window not
having focus yet. See QTBUG-105177.
Also remove processEvents() as events are always processed when doing
qWaitFor...().
Task-number: QTBUG-105177
Change-Id: I2260d1885388bbf7091c423bc9b4c16e2ed0090f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Previously the failure was been ignored because of the very generic
"linux" entry in the BLACKLIST file
Task-number: QTBUG-105201
Change-Id: I6914fe350f78266fc18541eb8fcd881f5a4ac511
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
+ I could not reproduce the flakiness on OpenSUSE Tumbleweed.
+ No significant flakiness can be seen for this test in our testresults
statistics.
+ Ubuntu-16.04 is no longer part of our CI
Change-Id: I7a18fc3fe2e58af8533171ebae0457b08424e810
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The cause is that the first EXPOSE event comes with the window not
having focus. See QTBUG-105177.
Fixes: QTBUG-67254
Task-number: QTBUG-105177
Change-Id: I04789d0a173979d9a60893989f76566b617c6576
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
There was an explicit int cast in fromBase64Encoding() which was never
ported to qsizetype and therefore truncated the result.
Fix by removing the int cast.
Add a test, optimize it for as low memory usage as possible, given we
need to work in input and output data each in excess of 2GiB.
Fixes: QTBUG-104985
Pick-to: 6.4 6.3 6.2
Change-Id: I9c0924957e62e5cb3003132cd811b8b0315d8ac1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The skipcleanup and failcleanup tests were actually testing skip and
fail in cleanupTestCase(), not in cleanup(). Add almost-duplicate
tests and clean up so that we now have {fail,skip}cleanup(,testcase}
tests to cover all four cases. Generated expected output. The new
tests (with old names) get their fail or skip - during cleanup() -
reported against the test instead of the cleanupTestCase function.
(Results for {init,cleanup}TestCase() are always reported, even when
these slots are not defined, as no-op passes.)
Pick-to: 6.4
Change-Id: I0988d1696b50c0e2f30c45ddc25e1bd0bfd2151a
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
So long as you only ask us to copy it. Copying is mandatory, though.
I'll firm up the warning in a later commit, which may not get cherry-
picked as far back.
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-105140
Change-Id: I3859764fed084846bcb0fffd170432abf65dc197
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Before a recent fix it would happen occasionally that
lastNormalizedPositions.at(0) would segfault because the list was
empty. The cause of the flakiness was fixed, but make the test more
resilient anyway by checking first the list is correctly populated.
Furthermore on some platforms this check fails:
qAbs(leftWidget.lastNormalizedPositions.at(1).x() - 0.8) < 0.05
So instead of QVERIFY use QCOMPARE_LT to print the values when it fails.
Task-number: QTBUG-104268
Change-Id: Id5430eb53c133cf5d23647cfd9749f01f266efce
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Sometimes XCB_EXPOSE event is being propagated twice, once before and
once after qWaitForWindowExposed(). But the window has focus only after
the second expose event. Changing it to qWaitForWindowActive() fixes the
issue.
Fixes: QTBUG-104268
Pick-to: 6.2 6.3 6.4
Change-Id: Ibc78dd4958ed1a4a8d0967b29d2a53457ab9ae8b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
And fix all the new warnings.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: I2a5791f495575d71d2344429aca3363f9922e31b
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The QTextFormat::FontFamily enum is deprecated since Qt 6.0, however it
is still used in the code.
To retain backward compatibility with the old data stream formats, we
introduce a new internal QTextFormat::OldFontFamily enum value, which
has exactly the same value as QTextFormat::FontFamily, and use it
instead.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: Ibf5258b621c2b0aa507005dfe2c1e80c26ddb0d4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... when QT_DISABLE_DEPRECATED_BEFORE is past the deprecation version.
This commit actually stops using the deprecated signals when we build
Qt with QT_DISABLE_DEPRECATED_BEFORE >= 0x060000. Otherwise we will
get a compilation error because the signals will be removed.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: Ie513ecc9451bf2d88f80857cf19f3d2b4958d022
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
When the method is wrapped into
if QT_DEPRECATED_SINCE(MAJ, MIN)
we also need to add QT_DEPRECATED_VERSION_[X_]_MAJ_MIN macro right in
front of the method declaraion, to actually trigger a deprecation
warning.
This patch does that for QCursor's deprecated methods, and fixes all
related compilation warnings in QtBase.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: Ic8d059e8c852d4b2dee55e7ea94f4fc7a402cdf4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
If the metatype does not support copy and default construction, then it
it unsuitunsuitable for use in QMetaType. We cannot prevent users from
passing in such metatypes (as we have e.g. a ctor taking QMetaType), so
verify this in customConstruct, and make the variant invalid in that
case.
Pick-to: 6.2 6.3 6.4
Change-Id: Ib1f0149c8fb9a1cce0049fd0311980754cc85d1b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
