The logic seems to be simple - if client code on error signal
tries to close TLS socket and this socket has buffered data,
it calls 'flush' and 'transmit' or even 'startHandshake' as
a result, which in turn will set and emit error again. To auto-
test this, we initiate a handshake with pre-shared key hint
on a server side and both client/server sockets incorrectly
configured (missing PSK signals). We also do early write
into the client socket to make sure it has some data
buffered by the moment we call 'close'.
Task-number: QTBUG-68089
Task-number: QTBUG-56476
Change-Id: I6ba6435bd572ad85d9209c4c81774a397081b34f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
According to RFC 6347 a DTLS server also must retransmit buffered message(s)
if timeouts happen during the handshake phase (so it's not a client only as
I initially understood it).
Conveniently so an auto-test is already in place and needs just a tiny
adjustment - handshakeWithRetransmission covers both sides.
Change-Id: If914ec3052e28ef5bf12a40e5eede45bbc53e8e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It was observed on OpenSUSE VM in CI - apparently, even after succesfull
read from UDP socket error was not UnknownSocketError. While it's under
investigation, the DTLS auto-test should limit itself by DTLS things and
barely test IO success (socket-wise) when needed.
Change-Id: I0773a02c591432b0d6c894f4131f70e41dc7ed72
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It all started from the compiler's warnings about 'this' captured but
not used in lambdas. While fixing this it was noticed that 'client' socket
has a lifetime longer than the test case itself (the socket has a parent,
which is tst_QSslSocket object). The 'server' socket was simply leaked.
So there is no guarantee that some of them (or both) later, after the
test failed in one of QVERIFY, for example, does not emit 'encrypted'
upon receiving more data; this will result: in reading/writing from/to
invalid memory location (captured local 'encryptedCount') and/or probably
exiting event loop when it's not expected to do so.
Change-Id: I51de0493d989a5ba36de2cef58d35526c0e26cda
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The test is somewhat similar to tst_QSslSocket but is smaller (in scope, will
grow in future), it has no QTcpSocket/QAbstractSocket-specific things and
has more DTLS-specific code. At the moment it does not use our network
test server, all work is done in the same process with two QUdpSockets
and two QDtls objects. We test (both on client/server ends):
- parameters validation (for all functions that do this) and
the correctness of error codes/handshake states
- handshake procedure (with/out certificates and with pre-shared keys)
- timeouts and re-transmissions during (D)TLS handshake
- peer verification (and related verification errors)
- aborted/resumed handshake
- encrypted I/O
- DTLS shutdown
For now, this test is OpenSSL-only.
Task-number: QTBUG-67597
Change-Id: I27006bfe3d6c02b89596889e8482a782c630402a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This part of DTLS is relatively easy to test: we never do a complete
handshake. Certificates, verification, ciphers, etc. - do not matter
at this stage (to be tested in tst_QDtls). Errors are mostly insignificant
and can be ignored or handled trivially.
The test is OpenSSL-only: SecureTransport failed to correctly implement/
support server-side DTLS, the problem reported quite some time ago and
no fixes from Apple so far.
Task-number: QTBUG-67597
Change-Id: I21ad4907de444ef95d5d83b50083ffe211a184f8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Previously the test worked because the client was the last party to know
when encryption was established. However, due to changes in the TLSv1.3
handshake the server is now the last one.
In either case, relying on both to be encrypted when one of them is
finished is not great, so now we only quit the event loop when both
client and server have emitted 'encrypted'.
Change-Id: Ic1fc75671206d866f7ea983805fd58a99657aac6
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Replace with QSignalSpy or QTRY_COMPARE when possible.
Task-number: QTBUG-63992
Change-Id: I18dc8837301424855487a12ee62451a5aeb21bf0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The formatting of the output from QSslCertificate::toText has
changed slightly from before, so it no longer matches the test's
data.
From what I can tell we just do a manual sanity check and create
a new file with the new output and then augment the test.
Task-number: QTBUG-67463
Change-Id: I751e5a3f9a28015f97c895cea47384704fd68e38
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Added a few functions to derive keys from passwords. Currently it
supports PBKDF1 and PBKDF2 as defined in
RFC 8018 ( https://tools.ietf.org/html/rfc8018 ).
[ChangeLog][QtNetwork][QPasswordDigestor] Added QPasswordDigestor
Task-number: QTBUG-30550
Change-Id: I2166b518bd8b54e3486514166e76fd9ba2f219c8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch adds the ability to decode keys which are encoded with PKCS#8
using the generic back-end (used in winrt and secure transport).
It works on both WinRT and macOS; however QSslKey seems unused in the
WinRT backend and it seems only RSA keys can be used for certificates
on macOS. Meaning that DSA and Ec, which in theory* should represent
their unencrypted versions, can't currently be tested properly.
* Can also be confirmed by loading the key using the ST or WinRT
backend, calling toPem(), writing the output to a file and then loading
the unencrypted key using openssl.
[ChangeLog][QtNetwork][QSslKey] Added support for PKCS#8-encoded keys
in the generic SSL back-end (used for SecureTransport on macOS and for
WinRT). Note that it does not support keys encrypted with a PKCS#12
algorithm.
Task-number: QTBUG-59068
Change-Id: Ib27338edc7dbcb5c5e4b02addfdb4b62ac93a4c3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When we load DER-encoded keys in the openssl-backend we always turn it
into PEM-encoded keys (essentially we prepend and append a header and
footer and use 'toBase64' on the DER data).
The problem comes from the header and footer which is simply chosen
based on which key algorithm was chosen by the user. Which would be
wrong when the key is a PKCS#8 key. This caused OpenSSL to fail when
trying to read it. Surprisingly it still loads correctly for unencrypted
keys with the wrong header, but not for encrypted keys.
This patch adds a small function which checks if a key is an encrypted
PKCS#8 key and then uses this function to figure out if a PKCS#8 header
and footer should be used (note that I only do this for encrypted PKCS#8
keys since, as previously mentioned, unencrypted keys are read correctly
by openssl).
The passphrase is now also passed to the QSslKeyPrivate::decodeDer
function so DER-encoded files can actually be decrypted.
[ChangeLog][QtNetwork][QSslKey] The openssl backend can now load
encrypted PKCS#8 DER-encoded keys.
Task-number: QTBUG-17718
Change-Id: I52eedf19bde297c9aa7fb050e835b3fc0db724e2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Properly handle single protocol TLS configurations. Previously,
due to the use of generic (non version-specific) client/server method
they worked as ranges of protocols instead. This also fixes a couple
of previously broken tests.
Task-number: QTBUG-67584
Change-Id: Ied23113a4fab6b407a34c953e3bd33eab153bb67
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Except RHEL-6.6 and 7.4
It was blacklisted in f3939d943e, along
with a lot of other entries. No specifics are known about why it was
blacklisted originally, but now it only fails on RHEL because they
use OpenSSL 1.0.1.
Change-Id: I6d1d1b7b7bf5386b2115b8780163550cf03bbad7
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test creates client and server sockets with mismatching protocol versions,
trying different combinations, for example: 1) server (TLS 1.0) vs
client (TLS 1.2) or 2) server (TLS 1.2) vs client (TLS 1.1), etc.
Since TLS v < 1.2 does not support signature algorithms, they are ignored
and handshake is always successful. But our new OpenSSL 1.1 backend uses
generic TLS_client_method and TLS_server_method when creating SSL_CTX.
This means, both server and client will support TLS v. 1.2, they
will have no shared signature algorithms, thus handshake will fail
with an error string similar to this:
"tls1_set_server_sigalgs:no shared signature algorithms".
For OpenSSL 1.1 this test makes no sense.
Task-number: QTBUG-67456
Change-Id: Ibb2a12eea5e5c0ebaeee7d0719cc721ecf4763e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Commit f55c73ede2 added various backendConfig methods;
API review for 5.11 pointed out that Config should not be abbreviated.
Change-Id: I3b294b44a030b2a6e4cdd034fa27583c228dfe42
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
With this change it is possible to use all supported
configurations in different backends without any new interfaces.
Change-Id: Ib233539a970681d30ae3907258730e491f8d3531
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Apparently this (undocumented) TESTDATA feature creates resource files,
but lets you use wildcards as well, which is very handy.
The reason I didn't know/realize this when adapting the tests to use a
".qrc"-file* was because some of the test-cases were using relative
paths instead of the 'testDataDir' variable.
This commit fixes the remaining uses of relative paths, removes a
usage of QDir::setCurrent, and adapts QSslSocket to use TESTDATA.
* in now-reverted commit e1600c1a73
Change-Id: Iee6d88f1e0810eeaadac90e7d44bc6db84bfeabf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Then we don't need to add a leading slash. (minor clean-up)
Change-Id: I86af224841009fda838e7cb89d47d324963328c9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit e1600c1a73.
The commit missed the fact that TESTDATA exists. Which supports
wildcards and then can automatically pick up new files when added (as
long as they match a wildcard) and then you don't need to maintain a
giant qrc file.
Change-Id: Ie31fadb5ef6e8dfe6105f4f9764292f78cffb512
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The reason for each is given in the skip. It's mostly about the
server-side encryption, which is unimplemented for WinRT.
Change-Id: I036b95a4526e02fd047e193f2b3c9130bec08144
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This lets the tests run on devices which previously did not have access
to the files used (WinRT, mobile devices).
Change-Id: Ibdd85862eee6ab1a7d4da87ca321ee9bc9880bfa
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... and unblacklist it.
It was blacklisted some years ago because it was failing too often.
It was failing because the ssl socket had already received and decrypted
all the data it was going to get, meaning the waitForReadyRead call was
just going to block forever.
Change-Id: Ia540735177d4e1be8696f2d752f1d7813faecfe5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The verifySessionProtocol() method in the SecureTransport backend did not
properly handle TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater.
This commit teaches verifySessionProtocol() about them.
It also adds TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater to the
protocolServerSide() test in tst_qsslsocket.
Backport from 5.10 to 5.9 (LTS).
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
(cherry picked from commit 9c765522d1)
Change-Id: I58c53bdf43e0f19b4506f3696d793f657eb4dc6f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The original test was using QSslSocket::waitForEncrypted function, which
is apparently a bad idea on Windows: connecting to 'www.qt.io' we have
to verify certs and there is no guarantee a given Windows VM has the required
CA certificate ready in its cert store. In such cases we start a background
thread (aka CA fetcher's thread) and it calls a (potentially blocking for
a significant amount of time) function (CryptoAPI). When finished, this
thread reports the results via queued connection, which does not work
if we are sitting in a tiny-loop inside waitForEncrypted. Re-factor
the test to use signals/slots and a normally running event loop.
Also, the last test makes a wrong assumption about Windows - fixed.
Task-number: QTBUG-63481
Change-Id: I4abe9cda2a6c52d841ac858cccb6bf068e550cb8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Using the information from grafana we can unblacklist all the things
which are consistently passing.
Change-Id: I79917ca9c40e1df2dab46bb54cc0a2bd4a1a4621
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Before testserver becomes a stable feature, let's keep testserver.prf in
"mkspecs/features/unsupported". The test server's shared files will be
stored in "mkspecs/features/data/testserver".
Because the path of testserver has been changed, all the tests relying
on the docker servers should be updated as well.
Change-Id: Id2494d2b58ee2a9522d99ae61c6236021506b876
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In this threaded setup the server can sometimes have the data before it
calls "waitForReadyRead", what happens then is that we fail the wait and
as a result the test fails overall.
Let's check if we actually got some data after all and then continue if
we did. Since both the client and the server currently wait the same
amount of time (2s) the max timeout for the client was increased by
0.5s so it has some time to notice that the server got the message.
Change-Id: Ib5915958853413047aa5a7574712585bcae28f79
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
And export the required symbols in OpenSSL so we can run the test there
as well even if it's not needed for any functionality.
Change-Id: I4246d2b0bbdd42079d255f97f3c66ce8bb37390b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
for SecureTransport backend. OpenSSL, while reading
RSA/DSA, is internally calling EVP_BytesToKey that
essentially does the same thing this patch does in
'deriveAesKey' and thus able to correctly decrypt
whatever it first encrypted (while generating/
encrypting keys).
Fixes: QTBUG-54422
Change-Id: Ia9f7599c5b19bf364c179f2abd2aab7ea5359a65
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Given the current feature disparity, it makes sense to give our users
ability to detect if they can use some feature or not in their application
code, using our 'modern' QT_CONFIG(securetransport). Accordingly, use this
new syntax in our own auto-tests.
Change-Id: Ib33b03e7e602e9f8b0db8251377c89dbaada1049
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Check if QSslKey::handle() returns data representing the
same key information as that passed to the constructor.
Task-number: QTBUG-64495
Change-Id: I1a91264e6f6d92d259b51fca9de00fcbfd5cc845
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
To work with docker test server.
Change-Id: I50a1c7b632748d7648dafd70356aa849614e4e12
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
The only reason our code wants PKCS12 files is for a private key, but
a valid file needn't contain one; and reading a file without lead to a
crash in QSslKeyPrivate::fromEVP_PKEY(). So check for missing key and
fail the load, since the file is useless to us. Also ensure the
caller's pkey is initialized, as we aren't promised that
PKCS12_parse() will set it when there is no private key.
Add a test for this case (it crashes without the fix) and update the
instructions for how to generate test data to cover it also.
(Corrected the wording there, too; at the interactive prompt,
"providing no password" really provides an empty password.)
Task-number: QTBUG-62335
Change-Id: I617508b903f6d9dee40d539b7136b0be8bc2c747
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The original test is quite unfortunate - it has cipher names hardcoded,
and it fails with OpenSSL 1.1 - no matching cipher found for 'RC4-SHA'
and QSslContext::initSsl fails with 'Invalid or empty cipher list'.
We skip this test entry for 1.1.
Change-Id: I810b80a62d9e27a60db71fd412af0c80630d976c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
ASN UTCTime uses two characters to encode a year (YY). When converting it
into QDate, it's quite naive to just add 2000. According to RFC 2459,
these YY represent dates in the range [1950, 2049].
This patch also introduces a helper function doing the checked conversion
from a string to int (to be reused in the following-up patches).
Task-number: QTBUG-61934
Change-Id: I3f6f471d24e8357b83b2f5973023b2b842751389
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Several tests are not valid for 1.1 anymore:
1. SSL2 was removed, but there is no OPENSSL_NO_SSL2 and the 'protocolServerSide'
test is trying to use QSsl::SSLv2 and thus is failing.
2. We now use the generic TLS_server/client_method instead of version specific
methods we have in pre-1.1 back-end. So, for example, a client socket with
QSsl::TLS_V1_0 in its SSL configuration will be able to negotiate
TLS 1.2 if our server socket wants it, while with TLSv1_client_method
(OpenSSL < 1.1) our test was expecting SSL handshake to fail.
Change-Id: I18efd5921c79b189e4d9529be09299a361a8a81d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As QAbstractSocket::readData does and as the documentation of QIODevice says
"this function returns -1 in those cases (that is, reading on a closed
socket..."
Change-Id: I1e64673f6a6d792a640bd6cb28b2bb5a0f18dc36
Reviewed-by: Aleix Pol
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit 96c27f0dfa.
We now use a custom keychain that should fix the original
problem with the test.
Change-Id: I52e4105f34a46ad7080750d9a62480ebe3a56e68
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The fix is outdated - the tests it was fixing - pass on 10.11.
Change-Id: I8b42c1d3d2f1279382b15c20587dcc93cf1b6b40
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Mixing different protocols on client-server sockets works differently
on 10.11, making previously successful handshakes failing now.
Failure is specific to 10.11 with SecureTransport.
Change-Id: I35374b40fa3d167802775b526cf6465ae78749cf
Task-number: QTBUG-48860
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
RFC6125 section 6.4.2 specify we need to convert the IDN to ascii
before comparison. Note that we don't need to toLower anymore
because toAce takes care of it.
Section 7.2 recommands that we dod not attempt to check for wildcard
character embedded within the A-labels or U-labels of an
internationalized domain name. So we reject names that contiains a
'*' but starts with 'xn--'.
Change-Id: Ib0830520a1f82bbf9fd11818718277a479527ee3
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Replace outdated LGPL21 with LGPL license header.
Use GPL-EXCEPT for all autotests.
Also use canonical contact url.
Change-Id: I6e5cc8a4285569c4f862730a980f492b8a933a72
Reviewed-by: Jani Heikkinen <jani.heikkinen@qt.io>
don't attempt to hand-craft a library export any more. instead, use the
configure system's built-in mechanism, and refer to it via QMAKE_USE.
this also allows us to rely on transitive dependencies in the autotest.
as a side effect, this makes the openssl-linked feature imply the
openssl one.
Change-Id: I5dd209b63bc8fbbc62852f6ffc472d4452ea2e68
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The verifySessionProtocol() method in the SecureTransport backend did not
properly handle TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater.
This commit teaches verifySessionProtocol() about them.
It also adds TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater to the
protocolServerSide() test in tst_qsslsocket.
Change-Id: I394766c75dbea4d89bf3d6b9c3f3c89530ac0749
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This commit simplifies defaultParameters() to simply construct an empty
QSslDiffieHellmanParameters and assigning the DER-form of the DH parameters
to QSslDiffieHellmanParametersPrivate's derData field.
This creates a valid QSslDiffieHellmanParameters instance, but skips any
potentially expensive verification steps.
The previous implementation of defaultParameters() would use the public
fromEncoded() method to construct an instance of the default parameters.
This triggers a verification of the passed-in data, which can be expensive.
To ensure our defaultParameters() QSslDiffieHellmanParameters instance does
pass verification, this commit adds an autotest to verify that.
Fixes QTBUG-57815.
Change-Id: I6b1d9dbbfde526b232c319195ddbad42326be27c
Task-number: QTBUG-57815
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
this actually fixes the build when ssl is not enabled, as the openssl
features are in the not included network-private module.
Change-Id: Ibafae9867af493da184a45cf3981628d475d37a6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
1. QSslSocketBackendPrivate::transmit was ignoring 'readBufferMaxSize';
as a result, we can have a user trying to set read buffer's size
to a small value (and more important - reading slowly in a small
chunks from this socket), but SSL itself socket reading 'too fast',
potentially growing its internal buffer to a huge size. This also
results in auto-tests failing - whenever we're trying to limit read
rate in some test.
2. Update qsslsocket auto-test.
Task-number: QTBUG-43388
Task-number: QTBUG-55170
Change-Id: Iedece26df0ac5b3b7cad62cc8c98aedc28e7ca5b
Reviewed-by: Richard J. Moore <rich@kde.org>
Move the different parts of configure.json/.pri into the libraries where
they belong.
Gui is not yet fully modularized, and contains many things related to
the different QPA plugins.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I6659bb29354ed1f36b95b8c69e7fce58f642053f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
- port Q_FOREACH to C++11 range-for
- port use of inefficient QLists to QVector
- port from QSharedPointer to auto variables except where the
payload is returned from a function (there ported to
QSharedPointer::create())
Fixes errors pointed out by my tree's static checks.
In sslErrors(), fixed an unwanted double-detach problem by
adding a strategic qAsConst().
Change-Id: I8148e23b73337f6f1a721e009f2974536d8447cc
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
- add missing \since 5.8 on free functions
- fix \relates of qHash to point to QSslDHP, not QHash, which is in another module
- API fix: use named instead of unnamed ctors
- share code between ctors
- API fix: add inline move ctor (for now, this requires using a naked d pointer,
which isn't much of a problem, since the class is immutable).
Change-Id: Ic30f9c3c03b8a3798e0676e38991ead85c587214
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
The deleteLater() call wasn't reliably reached when tests fail,
so use a QScopedPointer with QScopedPointerDeleteLater deleter.
Change-Id: Ica73bc73c2a0ac1e9b77e4804f2aedcad9b662a0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
In a TLS handshake the ephemeral server key is saved in the ssl
configuration. Clients who want to get the length or algorithm of the
key only get "Opaque" and "-1" as a result because the key is always
stored as "Opaque". This change converts the key to specific type so
more details are available and the client don't need to convert the
handle by hand.
Change-Id: I60f90fc2c1805e528640d391b20c676b6eeeb49e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Test is strangely failing on Ubuntu 16.04 with OpenSSL 1.0.2g-fips.
Change-Id: I1498dee4c1d6db0702da3d3689787aed1e3a633f
Reviewed-by: Richard J. Moore <rich@kde.org>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
If a user's code, attached to sslErrors signal, calls abort/close
or disconnectFromHost but our SSL socket was configured not to verify a peer,
no need to continue handshake after calling checkSslErrors
(and finally crashing on invalid 'ssl' pointer).
Task-number: QTBUG-53906
Change-Id: I7f185511d278f9d6f16e7d6c5ba424707141459c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
protocolServerSide test fails with 'ssl3-any' and 'tls1.0-any' combo
on RHEL 7.2 with OpenSSL v1.0.1e-fips, it would work as OPENSSL_NO_SSL2
code-path, but OPENSSL_NO_SSL2 is not defined, so socket is in state
connected while it's expected to be unconnected.
Task-number: QTBUG-53608
Change-Id: Ib321b95129a6ab5b0691b40cb4acc612125633b2
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
setEmptyDefaultConfiguration - this test (and this was stated explicitly
in comments!) must be the last test to run, otherwise, it can make subsequent
tests fail.
-exitLoop must be in 'protected slots' section not to be executed as a test,
since ... it's aux function, not a test.
Task-number: QTBUG-53608
Task-number: QTBUG-53603
Change-Id: I49d6d57ba927ecc4f20ae2d9325ad02fa46b0922
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Only the OpenSSL backend is supported right now.
[ChangeLog][QtNetwork][SSL/TLS support] It is now possible to
set custom Diffie-Hellman parameters for QSslSocket-based servers.
Change-Id: I50148873132cd0ec7e414250b107b6b4cbde02ea
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
[ChangeLog][QtNetwork][QSslSocket] TLS PSK ciphers are possible in server sockets.
Task-number: QTBUG-39077
Change-Id: Iaa854a6f50242deae5492f2e4759c727488995f5
Reviewed-by: Richard J. Moore <rich@kde.org>
Remove #ifdef sections for Q_OS_WINCE and wince .pro file clauses in library,
examples and tests.
Task-number: QTBUG-51673
Change-Id: I3706336395620522ceda414d7437295d9ec64f16
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Application-Layer Protocol Negotiation (ALPN) - is a reworked revision
of Next Protocol Negotiation (NPN) we have in our OpenSSL code.
Can be used as a part of HTTP2 negotiation during TLS handshake.
Change-Id: I484ec528c81d4887a64749095ec292dfaec18330
Reviewed-by: Richard J. Moore <rich@kde.org>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
When using cipher algorithms with forward secrecy an ephemeral key is
used to generate the symmetric session key. Beside the SSL certificate's
key, this ephemeral key is of cryptographic interest.
The ephemeral key is chosen by the server side - currently statically in
the Qt implementation - so it is only of interest on the client side to
check it. Therefore the ephemeral key is the null key if the connection
is set up in server mode or a cipher without forward secrecy is used.
Change-Id: If241247dbb8490a91233ae47f2b38952c6591bf4
Reviewed-by: Markus Goetz (Woboq GmbH) <markus@woboq.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
The platform is no longer supported or actively maintained, and is
in the way for improvements to the Unix event dispatcher and QProcess
implementations.
Change-Id: I3935488ca12e2139ea5f46068d7665a453e20526
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
As a follow-up for 5c1b9bbdf1 disable the
test on all platforms, since it fails on newer openssl. This was now
also happening on Windows, so until a fix is there, skip the test.
Change-Id: I6c8822c0ac5411b1114e9cd426219574ab1c9b54
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: I7974ace5b34f2da43e7511044e80de1e733245ac
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Prefer QCOMPARE over QVERIFY for equality and use QLatin1String().
Change-Id: If226a0fc7b25be3e6774c7e36ca1e6f99234e5dd
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
SecureTransport does not implement QSslCertificatePrivate thus some
tests relying on generic version fail. Skip them for now.
Change-Id: I483340b37786a8a556e954b2c538e4f48a342be9
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Icaa1edafcc6e2779fbd6dbc2c058544d6e07f1e9
Reviewed-by: Richard J. Moore <rich@kde.org>
The QSslCertificate tests only covered certificates with RSA keys, this
extends the test coverage to DSA and EC keys.
Change-Id: Ibee26f449cf6c1d97cbac6b511972eb44d6f0bd2
Reviewed-by: Richard J. Moore <rich@kde.org>
The comment about non-OpenSSL backends not reproting a specific error
for self-signed certificates contained a typo, this fixes it.
Change-Id: I3010981d5d87d68ebf5e984c003b8bbbfb019b96
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Preparing the replacement of Q[TRY]_VERIFY(a == b) by
Q[TRY]_COMPARE(a, b) for non-boolean types.
Change-Id: Iab6ec2f0a89a3adc79e18304573994965013dab5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
This adds an OpenSSL-based implementation of the QSslKeyPrivate encrypt
and decrypt method. This puts both the OpenSSL-based and non-OpenSSL
backends (WinRT for now) on par.
Change-Id: I18a75ee5f1c223601e51ebf0933f4430e7c5c29b
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Conflicts:
src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
Manually fixed src/testlib/qtestcase.cpp to return the right type.
Change-Id: Id1634dbe3d73fefe9431b9f5378846cb187624e4
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QSslConfiguration is better suited for these APIs. The ones
in QSslSocket that already have a counterpart have been deprecated.
[ChangeLog][QtNetwork][SSL/TLS Support] Most of the QSslSocket
functions to deal with ciphersuites, certification authorities
as well as elliptic curves have been deprecated in favor of the
corresponding counterparts in QSslConfiguration.
Task-number: QTBUG-46558
Change-Id: I1de03379efcbcab931c20e876e252769fe4279e0
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
Include class name, object name and file name when available.
For the bug in question:
QIODevice::read: device not open
becomes
QIODevice::read (QTcpSocket, "QFtpDTP Passive state socket"): device not open
Adding a static function also makes it easier to set a breakpoint
and find the culprit.
Task-number: QTBUG-46112
Change-Id: Ic181d8ab292912d1acbcc3cb84d9679fe4842ca0
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Currently the cipher preferred by the client will always be used for SSL
connections. This change makes it so that by default the ciphers
specified by the server will be used (like the Apache SSLHonorCipherOrder
option). This behavior can be disabled using a new SslOption.
[ChangeLog][QtNetwork][QSslSocket] QSslSocket will now default to using
the cipher preferences of the server socket when used as an SSL server.
This can be disabled using the QSslConfiguration.
Change-Id: I2d16d10145cf88a7412f30ef960d87024777de1c
Reviewed-by: Peter Hartmann <peter-qt@hartmann.tk>
This system is no longer in the CI rotation and we haven't had reports
of the same issues happening on later versions. Either the issues have
since been fixed or they were never an issue in Qt in the first place.
This commit has the additional benefit of getting rid of the following
shell error when qmake was run:
sh: line 0: [: =: unary operator expected
as /etc/lsb-release hasn't contained DISTRIB_CODENAME for some time and
proper quoting was never implemented (not even qtcpsocket.pro).
Change-Id: Ia0aac2f09e9245339951ffff13c829e910ee64e9
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Secure Transport relies on keychains, both client/server are constantly
updating default keychain and as a result tests are failing: when
verification is expected to fail, it succeeds; when the number of certificates
is expected to be 1 - it's 2 (Secure Transport can find certificates in a keychain).
This makes verifyClientCertificate test quite useless at the moment - QSKIP it.
Change-Id: I578398b4912a86dc60f585ac5a1bdd0098914005
Reviewed-by: Richard J. Moore <rich@kde.org>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
This adds tests to check the behavior of a QSslSocket-based server when
presented with various client certificates.
Change-Id: I431157e46cfb00880ae8b7a33015cce50e56b6bb
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
Move these types to QAsn1Element so that they can use the toString()
method which guards against malicious ASN.1.
Change-Id: I7d6155147a6fc2d41da6f3ae87551b6cb75aa9ce
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
We don't currently use this class for critical things like hostname
verification however we still want to ensure that it is not possible
to trick it using ASN.1 strings with embedded NUL characters. This will
avoid problems in the future.
Change-Id: Ibf3bc142a94fc9cad5f06db50f375399a087f9dc
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
Add support for SSL on iOS/OS X by adding a SecureTransport based
backend.
[ChangeLog][QtNetwork][QSslSocket] A new SSL backend for iOS and OS X,
implemented with Apple's Secure Transport (Security Framework).
Change-Id: I7466db471be2a8a2170f9af9d6ad4c7b6425738b
Reviewed-by: Richard J. Moore <rich@kde.org>
Mainly because of a change in certificates which is causing failing
tests.
Change-Id: I8304e5ac4107428a250b71be5df7b5399a811017
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Mainly because of a change in certificates which is causing failing
tests. This patch is cherry-picked from
https://codereview.qt-project.org/104619/
Change-Id: I8304e5ac4107428a250b71be5df7b5399a811017
Reviewed-by: Richard J. Moore <rich@kde.org>
[ChangeLog][QtNetwork][QSslSocket] It is now possible to use TLS PSK
ciphersuites in client sockets.
Task-number: QTBUG-39077
Change-Id: I5523a2be33d46230c6f4106c322fab8a5afa37b4
Reviewed-by: Richard J. Moore <rich@kde.org>
Since the conversion to a long name was already there, also support
creation from a long name.
Change-Id: Iad712db7447fb0a0a18f600b7db54da5b5b87154
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Change-Id: Ie6c659f6d8e8b3eeaf2453f0cba6189d56f86581
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Add possibility to get length and other information of EC based
certificates. Also it is possible to parse those public/private
keys from PEM and DER encoded files.
Based on patch by Remco Bloemen
[ChangeLog][QtNetwork][SSL/TLS support] It is now possible to
parse elliptic curve certificates.
Change-Id: I4b11f726296aecda89c3cbd195d7c817ae6fc47b
Task-number: QTBUG-18972
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_collections.cpp
tst_collections.cpp(3138) : warning C4305: 'argument' : truncation from 'size_t' to 'bool'
tst_collections.cpp(3190) : see reference to function template instantiation 'void testContainerTypedefs<QVector<int>>(Container)' being compiled
with[Container=QVector<int>]
(repeated)
tst_qringbuffer.cpp(297) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
tst_qringbuffer.cpp(300) : warning C4309: '=' : truncation of constant value
tst_qringbuffer.cpp(306) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
tst_qrawfont.cpp(947) : warning C4309: 'argument' : truncation of constant value
tst_qsslsocket_onDemandCertificates_member.cpp(217) : warning C4189: 'rootCertLoadingAllowed' : local variable is initialized but not referenced
Change-Id: I6143d4ad121088a0d5bdd6dd2637eb3641a26096
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
The setEmptyDefaultConfiguration test creates a socket and connects its
sslErrors signal to tst_QSslSocket's ignoreErrorSlot slot. This slot
expects the socket to have been stored in tst_QsslSocket's "socket"
member, which was not being done. This patch fixes this problem.
It does beg the question of whether having a "socket" member in the
tst_QSslSocket class is a good idea as it is error prone.
Change-Id: Ic59d1789c5f1ed240c3f0c37981f6ecc35572f0d
Reviewed-by: Richard J. Moore <rich@kde.org>
The sslErrors and peerVerifyError test the same situation: connect to a
server which is using the fluke certificate, using the incorrect host name.
They connect respectively to qt-test-server:993 and the.server.ip.address:443.
The sslErrors is prone to backend-dependent failures concerning the order
in which SSL errors are received, just like the peerVerifyError test was
until recently.
This change merges these two tests into one, which is run against the same
two servers as previously. It also adds a check to ensure that sslErrors
and peerVerifyError emit the same SSL errors (regardless of order).
This also fixes the included headers for non-OpenSSL backends.
Change-Id: Ibd5f60d24f1682989378e87729389e4b8f9efac5
Reviewed-by: Richard J. Moore <rich@kde.org>
Conflicts:
dist/changes-5.4.0
7231e1fbe2 went into 5.4 instead of the
5.4.0 branch, thus the conflict.
Change-Id: I70b8597ab52506490dcaf700427183950d42cbd1
[ChangeLog][QtNetwork][QtSSL] It is now possible to choose which elliptic
curves should be used by an elliptic curve cipher.
Change-Id: If5d0d58922768b6f1375836489180e576f5a015a
Done-with: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This makes it follow the coding style, which says to camel case acronyms too,
and makes it consistent with the rest of the class.
Change-Id: I4a1b21de1815530e476fc5aa8a0d41c724fc8021
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: hjk <hjk121@nokiamail.com>
After the poodle vulnerability SSLv3 should like SSLv2 no longer be
considered safe, so when a user request a safe protocol we should
only allow TLS versions.
[ChangeLog][QtNetwork][QSsl] QSsl::SecureProtocols now also excludes SSLv3
Change-Id: If825f6beb599294b028d706903b39db6b20be519
Reviewed-by: Richard J. Moore <rich@kde.org>
qsslsocket_winrt.cpp defined it locally, which runs the risk of
clashes with a potential user-defined qHash(QSslError), so
make it public.
Also included both .error() and .certificate() in the hash, as
both of these are used to determine equality (the WinRT version
only used .error()).
[ChangeLog][QtNetwork][QSslError] Can now be used in QSet/QHash.
Change-Id: Ieb7995bed491ff011d4be9dad544248b56fd4f73
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
qsslsocket_winrt.cpp defined it locally, which runs the risk of
clashes with a potential user-defined qHash(QSslCertificate), so
make it public.
Also, the implementation in qsslsocket_winrt.cpp simply hashed
the handle(), which violates the principle that equal instances
must hash to the same value. Also, for some platforms, the
implementation returns nullptr unconditionally, which, while not
violating the above-mentioned principle, will make all users of
the hash have worst-case complexity.
To calculate a meaningful hash, therefore, the certificate needs
to be inspected deeper than just the handle.
For OpenSSL, we use X509::sha1_hash, which also X509_cmp uses
internally to determine inequality (it checks more stuff, but
if X059::sha1_hash is different, X509_cmp() returns non-zero,
which is sufficient for the purposes of qHash()). sha1_hash may
not be up-to-date, though, so we call X509_cmp to make it valid.
Ugh.
For WinRT/Qt, we use the DER encoding, as that is the native
storage format used in QSslCertificate. This is not equivalent
to the implementation used in qsslsocket_winrt.cpp before, but
since handle() == handle() => toDer() == toDer(), it should not
be a problem.
[ChangeLog][QtNetwork][QSslCertificate] Can now be used as a key in QSet/QHash.
Change-Id: I10858fe648c70fc9535af6913dd3b7f3b2cf0eba
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This makes non-OpenSSL backends able to handle to certificate
extensions.
This also converts the Q_OS_WINRT #ifdef's in the unit test to
QT_NO_OPENSSL as the behavior is the same for any non-OpenSSL
backend.
Change-Id: I6a8306dc5c97a659ec96063d5a59cee2ee9a63a9
Reviewed-by: Richard J. Moore <rich@kde.org>
Currently the peerVerifyError test for QSslSocket makes an assumption
about the order in which SSL errors are emitted by peerVerifyError. This
assumption does not necessarily hold for non-OpenSSL backends.
This change fixes this assumption, and also checks that HostNameMismatch
was found both in the errors emitted by peerVerifyError and by sslErrors.
Change-Id: I856d1ea43b36332db0f178d35fc14a4bb18ad673
Reviewed-by: Richard J. Moore <rich@kde.org>
Some of the QSslSocket tests use OpenSSL-specific symbols. This
change fixes this issue.
Change-Id: Ib67efa42a15facaf0ad34fc0466341a37d945d1e
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
This adds support for reading and writing ASN.1 boolean
values. It also adds an operator to test two ASN.1 elements
for equality.
Change-Id: I4a22cbf9808533d593fc59d27b63caaf650b1f57
Reviewed-by: Richard J. Moore <rich@kde.org>
This adds a test for a QSslCertificate containing extensions which
are marked as critical.
Change-Id: I314e1f5c9943bcad5d43129a97f9f834882dc6fb
Reviewed-by: Richard J. Moore <rich@kde.org>
This tightens tests performed on a certificate's extensions by checking
isCritical() and isSupported() for all extensions. It also explicitly
checks the keys when value() returns a QVariantMap.
Change-Id: If51c55be25bbcd09cc3a6712ddfea2bf9a01360f
Reviewed-by: Richard J. Moore <rich@kde.org>
This adds the infrastructure for reading and writing encrypted private keys
when using non-OpenSSL backends. Each platform must provide its cryptographic
encrypt / decrypt functions.
As WinRT already uses the common parser, this commit includes an
implementation for that platform.
Done-with: Andrew Knight <andrew.knight@digia.com>
Task-number: QTBUG-40688
Change-Id: I0d153425ce63601ff03b784a111e13962061025f
Reviewed-by: Richard J. Moore <rich@kde.org>
This change adds the ability to decode ASN.1 INTEGER fields,
provided they represent a positive number of less than 64-bit.
This is needed for PKCS#12 decoding.
Change-Id: Iafb76f22383278d6773b9e879a8f3ef43c8d2c8f
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
QSslKey currently has methods which supposedly allow decoding and
encoding private keys as DER protected by a passphrase. This is
broken by design as explained in QTBUG-41038, as storing the encrypted
DER data alone makes no sense: such a file lacks the necessary
information about the encryption algorithm and initialization vector.
This change:
- explicitly stops using the passphrase when decoding DER in the
constructor. The behavior is unchanged, it is not possible to
read the encrypted DER alone.
- refuses to honor the passphrase to DER encode a private key. The toDer
method now outputs an empty QByteArray instead of garbage.
Task-number: QTBUG-41038
Change-Id: I4281050cf1104f12d154db201a173633bfe22bd9
Reviewed-by: Richard J. Moore <rich@kde.org>
This adds a test for 3DES encrypted keys in addition to the
current DES encrypted keys.
Change-Id: I229e3ef710e9ee23efa2a3275b89d958491de4a2
Reviewed-by: Richard J. Moore <rich@kde.org>
The native handle and import functions are now available for use in other
parts of the winrt backend.
Change-Id: I07e6f95b3411c3dc7c1a7a164544b18e5e435d01
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
This internal implementation of QSslKey can be used when OpenSSL is not
available. Encrypted keys are not supported, as the cryptography must
be supplied by a separate library.
With this commit, WinRT is migrated to the new implementation,
but qsslkey_winrt.cpp is left in place so that the missing crypto
implementation can be added later. This also means most of the expected
failures for that platform can be removed from the autotest.
Change-Id: I24a3ad1053bb72311613b28b3ae845aa1645a321
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This changes tests which use QSslCertificate::handle() to determine
if a certificate is null to use QSslCertificate::isNull() instead.
This is required for non-OpenSSL backends which do not actually
expose a private handle.
Change-Id: I9523ba0dd00d47ba337b543ad34840125db99bfb
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
This moves the socket backend's host name matching functions up to
QSslSocketPrivate so that they can be shared between backends. This
works, as there is no OpenSSL-specific code here.
Change-Id: I73c2081fdc2e60a44c90e90800d1e1877391a626
Reviewed-by: Richard J. Moore <rich@kde.org>
This element can be used for backends that do not offer all the
information that is needed when implementing a ssl certificate backend.
WinRT and the SecureTransport lack functionality in this area for
example.
The sources and tests are added for ssl and openssl configurations in order
to be tested. The condition for adding these can be changed as soon
as they are used by an actual implementation
Change-Id: I2b836133105afdc178bf3b1ee7d732bea069effa
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
This allows for opening of public key files. It does not, however,
support opening private keys (or decrypting/encrypting them). This is
due to limitations in the native API.
Nearly all public key tests pass (the native API doesn't support the
40-bit key in the test set). The private key tests are expected to fail.
Task-number: QTBUG-40688
Change-Id: Id8f2f1ae6526540736ceb2e5371f6a5d80c4ba7b
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Discussed with Peter and agreed that it's a slightly better fit there.
Change-Id: If8db777336e2273670a23d75d8542b30c07e0d7b
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Add support for loading certificates and keys from PKCS#12 bundles
(also known as pfx files).
Task-number: QTBUG-1565
[ChangeLog][QtNetwork][QSslSocket] Support for loading PKCS#12
bundles was added. These are often used to transport keys and
certificates conveniently, particularly when making use of
client certificates.
Change-Id: Idaeb2cb4dac4b19881a5c99c7c0a7eea00c2b207
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
Change-Id: I92fa083665509932b75ff1037904a6f78a950fd6
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Change-Id: Ife5b7206fd3d7af57cfca3c0f28f56bb53ede7a7
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Change-Id: I2912dcca77270582f6e989b8b3fb72b82f6f70d6
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Despite supporting DH and ECDH key exchange as a client, Qt did not provide
any default parameters which prevented them being used as a server. A
future change should allow the user to control the parameters used, but
these defaults should be okay for most users.
[ChangeLog][Important Behavior Changes] Support for DH and ECDH key exchange
cipher suites when acting as an SSL server has been made possible. This
change means the you can now implement servers that offer forward-secrecy
using Qt.
Task-number: QTBUG-20666
Change-Id: I469163900e4313da9d2d0c3e1e5e47ef46320b17
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Output the SSL library version, output socket error string on connection
failure consistently, silence numerous warnings about QIODevice not
being open in tst_QSslSocket::constructing.
Change-Id: Ia23d42de5b2daca55b2f6f50af025d61e99c52a0
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Any cipher that is < 128 bits is excluded from the default SSL
configuration. These ciphers are still included in the list
of availableCiphers() and can be used by applications if required.
Calling QSslSocket::setDefaultCiphers(QSslSocket::availableCiphers())
will restore the old behavior.
Note that in doing so I spotted that calling defaultCiphers() before
doing other actions with SSL had an existing bug that I've addressed
as part of the change.
[ChangeLog][Important Behavior Changes] The default set of
ciphers used by QSslSocket has been changed to exclude ciphers that are
using key lengths smaller than 128 bits. These ciphers are still available
and can be enabled by applications if required.
Change-Id: If2241dda67b624e5febf788efa1369f38c6b1dba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt since approximately 4.4 has set the verify callback on both the SSL
store and the SSL context. Only the latter is actually needed. This is
normally not a problem, but openssl prior to 1.0.2 uses the verify
code to find the intermediate certificates for any local certificate
that has been set which can lead to verification errors for the local
certificate to be emitted.
Task-number: QTBUG-33228
Task-number: QTBUG-7200
Task-number: QTBUG-24234
Change-Id: Ie4115e7f7faa1267ea9b807c01b1ed6604c4a16c
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... because it was used to operate a man-in-the-middle proxy.
Task-number: QTBUG-35474
Change-Id: Ic7f19708b278b866e4f06533cbd84e0ff43357e9
Reviewed-by: Richard J. Moore <rich@kde.org>
