CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The previous fix 754512a64d
did not handle qml plugins, which meant that they would still have
hardcoded paths and see warnings like the one below when generating
the prl files
CMake Warning (dev) at
cmake/QtFinishPrlFile.cmake:103 (message):
Could not determine relative path for library
qml/QtQml/WorkerScript/libworkerscriptplugin_debug.a
when generating prl file contents. An absolute path will be
embedded, which will cause issues if the Qt installation is
relocated.
Handle qml plugins as well.
Amends 754512a64d
Amends f4e9981259
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-104708
Task-number: QTBUG-104396
Change-Id: Icfb1069d1cb0a39a35004b20e58ee6e386d14f3b
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Make sure to convert absolute paths generated using the
$<TARGET_LINKER_FILE> generator expressions into relative paths.
Because prl files are generated for both modules and plugins, we need
to pass both a list of qt module locations and qt plugin locations
to QtFinishPrl.cmake, and then try to make the absolute path relative
to each passed directory.
A warning assertion is shown if we no relative path could be made,
which will cause an absolute path to be embedded. This should not
happen though.
Amends f4e9981259
Pick-to: 6.2 6.3 6.4
Fixes: QTBUG-104396
Change-Id: Id68395c0dbb20aad5c510d77835cc931b9396556
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
qmake adds QMAKE_PRL_LIBS values on the link line after the currently
processed library. Because CMake adds resource object files into
QMAKE_PRL_LIBS, they end up on the link line after the library.
This causes issues on Linux with GNU ld and ld.gold, because the
linker discards symbols from the library which are then later referenced
by the object files.
Work around that by placing the path to the library directly into
QMAKE_PRL_LIBS after the resource object files.
This ensures the linker doesn't discard the symbols required by the
resource object files.
This means that each library encountered in qmake's LIBS variable will
be temporarily referenced twice in qmake's project state: once from
LIBS / QMAKE_PRL_TARGET, and once when the QMAKE_PRL_LIBS values are
added. On the link line it will appear only once though, because qmake
does library deduplication during prl file processing, which only keeps
the last occurrence.
Amends 4ab5432081
Pick-to: 6.2 6.3
Fixes: QTBUG-103002
Change-Id: I97647b64de22b158424850915fee62b5fea5f995
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Quote the paths after "-L".
Get MSVC’s implicit link directories from $ENV{LIB}.
Fix some issues cause by Inconsistent case.
Amends 2c49f85380
Fixes: QTBUG-95198
Pick-to: 6.2 6.1
Change-Id: Ie82f10b088e2764396377726340509f24a4ae8e7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Move collected resource objects to the beginning of the linker line to
prevent order-related issues.
Fixes: QTBUG-92250
Change-Id: Ia046f2820feb693bfadc2b60e07fa001638d4d7b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In MSVC static build, if we build Qt with 3rdparty library (e.g. zstd),
cmake will add"zstd" (without "-l" prefix) to Qt6Core.prl. Then we
use this Qt to build a qmake project, compilation will fail due to
missing zstd.obj. Without "-l" prefix, qmake will treat "zstd" as an
object file instead of a library.
Library names in qt_module.pri and qt_lib_*_private.pri are also
missing "-l" prefix.
This is because on most compilers, CMAKE_LINK_LIBRARY_FLAG equals
"-l". But on MSVC, it is an empty string. So we should pass
"-DLINK_LIBRARY_FLAG=-l" for MSVC.
Also add "-L/path/to/library" if the library path is not in default
linker search directories. This will write un-relocatable paths to prl
files only when using 3rdparty libraries to build Qt statically. Usually
it's not a problem.
In addition, CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES is also empty on
MSVC. So The third argument of "$<FILTER>" is empty, it is an invalid
generator expression. This means no include dir will be written to
qt_module.pri and qt_lib_*_private.pri on MSVC. So only use "$<FILTER>"
when CMAKE_CXX_IMPLICIT_INCLUDE_DIRECTORIES is not empty.
Pick-to: 6.1
Change-Id: Ib66f95dc09cf920363a4b9338fb97747dd2f8ab7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Clarify that OUT_FILE is not the final .prl anymore and where we get the
path of the final .prl from.
Change-Id: I4563c6ef1026bc0646e3ac9ab2fac49e426ca07f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously we determined if a library represented by an absolute path
is a Qt module by checking if it's located in the build dir of the
current repo.
That is not sufficient for non-qtbase prefix builds, where
a Qt module might link against both a module in the current
build dir and in the prefix dir.
Detect such cases, and rewrite the absolute paths to relocatable paths
(either framework flags or paths starting with $$[QT_INSTALL_LIBS].
This should fix building examples with qmake that use QtQuick.
Fixes: QTBUG-87840
Change-Id: Icaf8f1a7c66292c80662fd0d5771a5a1628a9899
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For example, we must not prepend -l to -pthread, -framework and -lfoo.
Fixes: QTBUG-87760
Change-Id: Ie1bc7a76183c2c4980c519b5f23dde6c47ec85a9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Apply the same kind of transformations to the contents of the prl
files as we do for pri files. Mainly, transform system library paths
that are absolute, into link flags to make them relocatable across
systems.
Also change the Qt frameworks to be linked via the -framework flags
instead of via absolute paths.
Implementation notes
Move the common required functions for both QtFinishPrlFile and
QtGenerateLibPri into a common QtGenerateLibHelpers.cmake file.
Make sure it's listed as a dependency for the custom commands.
Also make sure to pass the necessary input values like possible
library prefixes and suffixes, as well as the link flag.
Task-number: QTBUG-85240
Task-number: QTBUG-85801
Change-Id: I36f24207f92a1d2ed3ed2d81bb96e4e62d927b6e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Our CMake build system only generated working .prl files for
the Release configuration in debug_and_release.
This caused a linking failure when building a Widgets example that
links against qtmain, specifically
qtmaind.lib(qtmain_win.cpp.obj) : error LNK2019: unresolved external
symbol __imp_CommandLineToArgvW referenced in function WinMain
The symbol is located in shell32.dll, which was not linked in, because
there was no qtmaind.prl file.
The fix to generate per config prl files is a bit complicated, because
add_custom_command does not support generator expressions in OUTPUT
and DEPENDS.
Instead we pre-generate 2 files per config, one with the preliminary
prl file content and another file that contains the final prl file
path (via generator expression).
Then we iterate over all configurations and create custom commands
with well known paths, and the final prl file is created by the script
called by the command.
Amends 06557312d2
Task-number: QTBUG-85240
Change-Id: I413b705bc69732b0cbe1ee8cd089a1aef19365db
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Since commit e343affd63 we're creating object libraries for Qt
resources in static libraries. Those must be reflected in the
generated .prl files for static builds of Qt.
In qt_add_resource, we now calculate the install locations of the
object files of rcc-generated C++ files and save them in the target
property QT_RCC_OBJECTS. This property is then passed to
QtFinishPrlFile to write the object file paths to the .prl file.
Change-Id: Ic383892d723d02fc91f712bc2dbcbc90babad074
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We do not support building with qmake from the build directory in prefix
builds. Therefore we can just use the standard QT_INSTALL_LIBS property
instead of the /get variant.
Change-Id: I82ccaf1894fb1dccc9ec18b4984b582b555ce0f8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Include headers in .pri files should point to the framework Headers
dirs.
The module name in the .pri file is not versioned when it's a bundle.
Paths to system frameworks in .prl files should instead be replaced
with -framework Foo flags.
Change-Id: Ia353d033799fae40a1bc55fad6f86b2c8ef76c56
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
This commit also adds a qt_finalize_module function that is called for
every Qt module after all link dependencies have been added.
Change-Id: I489d188d05e368208a8a62828bb12fb395df54bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
