avoids that we needlessly initialize QMLIMPORTSCANNER in addition to
QMLIMPORTSCANNER_SYS (by making the former have the contents of the
latter).
Change-Id: Ib8a12975de426ae94bd78d489099157c94cea189
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
to this end, add a mode to qtPrepareTool() which prepares the primary
variable for system() use (instead of use in makefiles).
Task-number: QTBUG-41032
Change-Id: If6aa6c206a70ecdbc2ea05bbb3cb470414fb02b1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Giving instructions, rather than forcing one to grep qtbase for the error
message is always a good thing.
Change-Id: I0f5abed341368cdf817dc0110c2c250b377a30de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This field specifies whether the app is an iOS app.
Change-Id: I38cfcbec97b32f517a14a9a34f1eb871b9fa1ef7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
the condition is copied 1:1 from the BUNDLE_DATA logic in qt_module.prf.
Task-number: QTBUG-41267
Change-Id: Ia80a9a29319f70017e090855cf8d35a77b9e727f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This follows the discussion at:
http://lists.qt-project.org/pipermail/development/2014-June/017225.html
Qt WebEngine will have a version of 1.0 when released with Qt 5.4.
The library name is currently libQt1WebEngine.so.1.0.0 but it should
rather be libQt5WebEngine.so.1.0.0 to represent Qt's major version
releases as a whole and not the major version of the module. This
prefix essentially expresses the module's dynamic linking
compatibility with other Qt modules.
This only makes sense if each major module release will be compatible
with a single Qt major version only.
All published modules currently already have 5 as their major version,
except qtenginio which doesn't use a Qt prefix, so this change has no
effect except for qtwebengine.
Task-number: QTBUG-30910
Change-Id: I894e7a367624c7fc263cf08104173a82eafd1439
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
X11 and the GL libraries are installed into /usr/local like other
software, and this has been the case for many years.
Change-Id: Ied4d9d61154014db3861bdbd6a5bdbe68e76f878
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Follow-up to 9de2853a ("Remove automated generation of dwarf index"):
gdb_dwarf_index.prf does not exist anymore, so stop referencing it.
Change-Id: I22464d5b81a50a2f58218d74a424f3a790aa1df0
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Device specific compiler flags need to go to QMAKE_CFLAGS, so that
they are used also when --force-debug-info is used. Removed separate
_DEBUG and _RELEASE, since the gcc-base provides same defaults.
Change-Id: I6ce0133a1acf419261b7756525185f43581d2a9c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is done by defining QMAKE_LFLAGS_RPATH for compilers for Apple platform.
Task-number: QTBUG-31814
Change-Id: I9040df341ad46395d6ab71bc760ba7a5ee5ff291
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
We no longer support the maemo/meego platform, so we can remove the
specific code for that platform.
Change-Id: Ia7f0730eba2d96794b97b7ca4753f63a2d7bc2a8
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This code hasn't been tested for at least 4 years. It's not maintained
and probably doesn't work.
Change-Id: I4b9a5179e34111b400914f91caa6b741b69771bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When deploying QML applications, the androiddeployqt tool can
use qmlimportscanner to detect the QML dependencies of the
application, but then it needs to know the root of the project
as well as additional QML import paths. We use the already-existing
QML_IMPORT_PATH for the import paths, and default to using the
location of the .pro file for the root path (same as for static
builds in qt.prf).
Change-Id: Ib536272ed1f3f1320ea8ef529655e2ba003bc734
Task-number: QTBUG-34175
Reviewed-by: BogDan Vatra <bogdan@kde.org>
It's needed by androiddeployqt tool to run "zipalign" tool
and to set it to gradle properties.
Task-number:QTBUG-40481
Change-Id: I3dd665a7461a4e981867cdad75a50940e46a5ae6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Now that we rely on simd.prf for all SIMD sources (including NEON and SSE2),
we need to ensure that CONFIG has the right SIMD values to match simulator.
This worked before due to us checking QT_CPU_FEATURES.$$QT_ARCH and adding
directly to SOURCES.
Change-Id: I4ea7f559e83860eabff1948ad5d140bbb65454df
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
when doing a module-by-module build, we need to also use includes and
libraries from the install tree, as it contains the current module's
dependencies. but a pre-existing installation of the current module must
not be found first, as it would cause trouble latest when it was somehow
incompatible.
but purely topological sorting of the dependencies could cause the
locations to be mixed up. therefore we give modules which are part of
the current build a priority boost.
Change-Id: I8fdbb46f0a2a630781c8a2177468039c1122151a
Reviewed-by: Giulio Camuffo <giulio.camuffo@jollamobile.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
For multi-pass RCC qmake generates broken VS project files, because
the RCC extra compiler directly calls the C++ compiler on a generated
source file. Adding this call to a VS project file will bypass any
project settings. Also, the VS project generator is not prepared to
add extra compilers that generate object files.
Task-number: QTBUG-39685
Change-Id: I1bcaad8936be8371d596f29ed8952888ba95f7b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This was a long-time coming.
One innovation from this commit is that it will add the source to
SOURCES if the compiler is already generating code for that specific
target. That is currently always the case for Neon, and the MIPS DSPs
since that is the only condition in which configure will enable those
targets. And because of qt_module.prf, it's also always the case for
SSE2 (but not for SSE3 or higher).
So simplify the .pri files by removing always-true conditions.
Change-Id: Ib24af74717b652c9a6be246e3c17a839470f37da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>
We don't actually detect whether the compiler can create Neon code or
provides Neon intrinsics. Most of them do, so that test would be mostly
moot. We removed the detection previously because we couldn't
automatically enable Neon due to leakage of instructions outside the
areas protected at runtime.
Instead, we rely on the mkspec properly passing the necessary flags that
enable Neon support.
This commit does not change that. All it does is verify whether the arch
detection found "neon" as part of the target CPU features. In other
words, it moves the test that was in simd.prf to configure.
It does fix the Neon detection in configure.exe, which was always
failing for trying to run a test that didn't exist
(config.tests/unix/neon).
Change-Id: Id561dfb2db7d3dca7b8c29afef63181693bdc0aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This patch adds the feature use_gold_linker to use the gold linker that
has been part of of GNU binutils since 2008. Gold links C++ libraries
much faster and use less memory.
The feature is autodetected when building Qt on Linux, but can be disabled
in configure. On MingW builds it is default off but can be enabled for
cross builds.
Change-Id: Icdd6ba2e706b2c791bcf44b6e718c2b7a5eb2218
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We don't have a way to rename main() inside a LLVM bit-code file yet, so we
error out if we detect that LTO is enabled (which causes object files to be
written as LLVM bit-code), and inform the user about a workaround.
Task-number: QTBUG-40184
Change-Id: I89c927a3a7f075c65e54442c4f7e6bb25175b6f7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
GCC currently requires fat object files for static libraries, since the
linker would otherwise not load the .o file from the archive at all and
the linking would fail with a lot of undefined references. Clang on
Linux also needs this, but it has no equivalent flag, so enabling LTCG
for Clang on static libraries will result in linker error.
This commit does not add support for enabling it in configure. It can be
enabled on a per-project basis by doing CONFIG += ltcg or by passing
-config ltcg to qmake's command-line.
Change-Id: I52cf99f1ed9f1701e23a3b457ba3502fd28126ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
currently there isn't a clean solution yet to support object files
or architecture specific files during the preprocess step when
using the xcode generator.
This fixes ios resources (but will break with large resources).
Task-number: QTBUG-39835
Change-Id: If620ab0c3b5c1f92db8f7b4740061c807730db57
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Most compilers out in the wild still don't support the flag, so we need
to compare the version number anyway. This also makes it ready for
whenever compilers start supporting -std=c++14, something we should fix
for C++11 too.
It overrides the CXX11 variable for two reasons:
1) we reuse the mechanics in c++11.prf
2) we avoid c++11.prf overriding the flag if qmake decides to process
it later (CONFIG += c++14 is additive)
Change-Id: I79b6523fd9017483f2474634d1c09f2fd5ea039d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We have to escape the target name to avoid compilation errors.
This fixes the compilation failure in the qprocess autotest.
[ChangeLog][Android] Added support for building libraries with
spaces in name.
Change-Id: Ib98ba261fb3a4cc1e835d0cd2f93aac6855a7c21
Reviewed-by: BogDan Vatra <bogdan@kde.org>
MSVC 2013 implements the behavior mandated by C++11 that removes the
ability to downconvert a string literal to a modifiable char*, but it's
not enabled by default. This option turns it on.
It's only enabled for release builds because the compiler page has a note
saying the Standard Library has bugs that prevent it from working in
debug mode. See http://msdn.microsoft.com/en-us/library/dn449508.aspx
Visual Studio "14" has this fixed.
[ChangeLog][Compiler Specific Changes] Release builds with Microsoft
Visual Studio 2013 now enable the standard-conforming C and C++ strict
string behavior. This option will be enabled in all builds with future
Visual Studio versions. Non-conforming code should be fixed for maximum
portability and correctness. See
http://msdn.microsoft.com/en-us/library/dn449508.aspx for more
information.
Change-Id: If5ba6cc8456209b268e047d1010710fe332b8312
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The integrated assembler of clang does not understand some/all of the
ARM macro assembler syntax used in pixman-arm-neon-asm.S. By default,
this integrated assembler is used when using the "clang" command as a
driver. This patch turns off the integrated assembler of clang for that
file.
Change-Id: Ic06801266b5a4b097ca835d815bcc5d5fc672946
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When LTCG/LTO is enabled, the link-time compilation will not use the
data in the object file, but instead the precompiled data in a separate
section, which is still blank and may not be recognizable by rcc's
second pass. That would result in all resource data being nulls -- and
the best case scenario out of that is that QResource concludes that
there is no resource (it could be worse).
That happens with GCC 4.8's GIMPLE intermediate format: a fat .o file
containing GIMPLE would be modified by rcc but GCC would not use the
modified data at the link stage, whereas a non-fat .o file would not be
recognized at all by rcc and the compilation would abort.
Change-Id: I78ccbfd77ceaa723f22a4f82b5b4d6536a80d65d
Reviewed-by: hjk <hjk121@nokiamail.com>
Unlike MSVC, ICC is capable of selecting each of the processor feature
levels, so let's define the right macros.
Version 9.1 is really old and not supported, so we don't need to keep
the old workaround.
The compiler has been complaining that option -GX is deprecated and will
be removed, so update it to use the same as MSVC does.
Change-Id: I4158fcf2331c1d27462bb1cb19725c7136efab4a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
mkspecs/qnx-x86-qcc/qplatformdefs.h
src/corelib/global/qglobal.h
src/network/socket/qnativesocketengine_winrt.cpp
src/plugins/platforms/android/androidjniaccessibility.cpp
src/plugins/platforms/windows/qwindowswindow.cpp
Manually adjusted:
mkspecs/qnx-armle-v7-qcc/qplatformdefs.h
to include 9ce697f2d5
Thanks goes to Sergio for the qnx mkspecs adjustments.
Change-Id: I53b1fd6bc5bc884e5ee2c2b84975f58171a1cb8e
This is essentially an opt-out using CONFIG += resources_small for the
'big-data' feature introduced and made mandatory with commit 5395180.
This is currently not active in any configuration, but can be used
when the two-pass approach is neither needed nor wanted.
Change-Id: I6d4f663843e629da6f39ac4da5e77d39c58b3ddf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ICC does support C++11, but the Apple headers contain invalid code that
Clang seems to accept. In C++11 mode, code using CF_ENUM expands to:
typedef enum EnumName : CFIndex EnumName; enum EnumName {
Which is valid Objective C++, but not valid C++.
Bug reports to Intel and to Apple are pending.
Discussed-on: https://groups.google.com/a/isocpp.org/d/msg/std-discussion/yDfkDo6C0BM/EVWzwjVbyh4J
Change-Id: I7d501e94212a90f5c7197a3b56016dadac2c44ad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It somehow forgets the dot and thus can't open any moc or uic includes.
Intel bug: DPD200357915
Change-Id: I610ba4d3df0072bfb83f90347d94f4586d0d8c86
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The Intel compiler does support C++11 options on the command-line.
configure.exe will correctly try to run it, but the test would fail for
incorrect reasons.
First, we need to pass the option -Qstd=c++11 to enable it.
Second, on Windows, the GCC experimental define isn't defined, nor is
__cplusplus updated yet. So we have to rely on the Intel-specific macro.
Third, we need CONFIG += console so that the application succeeds in
linking against a main() function, as opposed to a WinMain one.
Change-Id: I8f3252189df4f8854a9d9aa2cd919c288d2df420
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The -xXXXX options are deprecated, so use the GCC-style -mXXX options.
Change-Id: I235c73c4a170003b5b5e20bd4c4c7125107f7f82
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
