QMetaType::create can call user code and we should not keep mutex held as
this may cause dead lock.
Make sure the tst_qobjectrace actually emit some signal so the test check
there is no race if the receiver object is destroyed while
the mutex is unlocked.
Task-number: QTBUG-39990
Change-Id: I56ca1ae7a11cd7b33c1a68727370972862e11c2f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Like for integers, this is activated only on QLocales other than C.
[ChangeLog][QtCore][QTextStream] QTextStream now uses group separators
when writing floating-point numbers when the locale is not the C locale.
The old behavior can be restored by setting QLocale::OmitGroupSeparator
on the locale.
Change-Id: Ie451b91017746c3a9b11b6211b2ddd09cd295cd2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
It allows to create a QJsonArray instance in C++ by using
a similar expression to JSON. For example:
QJsonArray a = {1, 2, 4};
[ChangeLog][QtCore][QtJson] QJsonArray now supports
C++11 initializer lists.
Task-number: QTBUG-26606
Change-Id: Icc352e518d9649d24176c89e7113d200d5c50b0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Factor out code to clear all mappings into
QFSFileEnginePrivate::unmapAll() and call that
from QTemporaryFile.
Task-number: QTBUG-39976
Change-Id: Ic1ceeba0ba4451866f1081fee430e5c458c0819d
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The assumption that we can test "en_US" and expect
it to behave a certain way is flawed in that most
of the formatting settings are independently
configurable by the end user.
Make the test more robust while attempting to preserve
as much testing as possible:
Make the decimalPoint/groupSeparator tests check for
a range of possible values. Check that they are not
the same.
Remove the date formatting tests and the firstDayOfWeek()
== Sunday test.
Make the time zone test accept a non zero extended
time zone. ("GMT+2" in addition to "GMT+02".)
Change-Id: Ie1f89793eb785f526c5f6fafbb6726ef8c6cb016
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The combination of these unstable tests makes it very
hard to get changes through the CI system due to the
unrelated test failures.
Skip the following test functions:
tst_QIODevice::unget QTBUG-39983 (Mac)
tst_QThreadPool:expiryTimeoutRace QTBUG-3786 (Windows)
tst_QLocalSocket::processConnection QTBUG-39986 (Mac)
tst_QTcpServer::adressReusable QTBUG-39985 (Linux)
Change-Id: I96559bea0d437fd25966b6ccac1ece1490e06241
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
The setting of (static) messageHandler to qDefaultMessageHandler if null
was happening in multiple threads simultaneously, so it needs synchronization.
Used an atomic pointer in case qInstallMessageHandler is called from a thread,
but more importantly, initialized the static vars right away.
Improve auto test to ensure that qInstallMessageHandler(0) still sets the
default message handler.
Change-Id: I70335af38c1d28a1cdba1df8a79c6006f227422e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
mkspecs/qnx-x86-qcc/qplatformdefs.h
src/corelib/global/qglobal.h
src/network/socket/qnativesocketengine_winrt.cpp
src/plugins/platforms/android/androidjniaccessibility.cpp
src/plugins/platforms/windows/qwindowswindow.cpp
Manually adjusted:
mkspecs/qnx-armle-v7-qcc/qplatformdefs.h
to include 9ce697f2d5
Thanks goes to Sergio for the qnx mkspecs adjustments.
Change-Id: I53b1fd6bc5bc884e5ee2c2b84975f58171a1cb8e
The almostplugin has an unresolved symbol, and on Android
we compile with -no-undefined.
Change-Id: Ia631193890dfe8e7ac8e58087475164222d876fc
Reviewed-by: BogDan Vatra <bogdan@kde.org>
It enables you to get a valid QSharedPointer instance to 'this',
when all you have is 'this'.
Task-number: QTBUG-7287
Change-Id: I3ed1c9c4d6b110fe02302312cc3c4a75e9d95a0c
Reviewed-by: Richard J. Moore <rich@kde.org>
This macro is equivalent to arg.toUtf8().constData().
It is usable for "%s" arguments of qDebug(), qWarning(), qFatal(),
qCritical().
Change-Id: I2d9956e6651271e1e2183dce9c835511cf923bf3
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is needed to control a QStateMachine object from QML.
Change-Id: I19271d97718af2d688c477647d6341f70fdef3ea
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
Qtbase contains four identical implementations of next power of two,
these should be shared and the implementation made available to other
qt modules, as it is also used many places outside of qtbase.
[ChangeLog][QtCore][QtMath] Introduced qNextPowerOfTwo methods.
Change-Id: Id23fbe5ad6bae647b30d5a4212c0330e48a50278
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add conversion methods similar to those in QString to QByteArray. This
is often more useful than the QString version since std::string like
QByteArray are byte arrays.
[ChangeLog][QtCore][QByteArray] Added convenience methods to convert
directly to and from std::string.
Change-Id: I92c29d4bb1d9e06a667dd9cdd936970e2d272006
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Instead of using std::thread, use the WinRT ThreadPool to manage
threads. This allows for setting the scheduling priority, and provides
a path to enable XAML integration (which requires Qt run on a background
thread).
QThread::terminate() is still unsupported, and only the winmain thread
can be adopted due to the behavior of the thread pool when creating
tasks from the GUI thread. The associated tests are now skipped, and
all other QThread tests pass.
Task-number: QTBUG-31397
Change-Id: Ib512a328412e1dffecdc836bc39de3ccd37afa13
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Forward canDropMimeData() and dropMimeData() to the source model.
[ChangeLog][QtCore][QAbstractProxyModel] QAbstractProxyModel now
forwards the drop-related API.
Task-number: QTBUG-39549
Change-Id: Ib81fcec862586e4ecfb99b9e0f4eb1a16eace762
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Fix condition to allow return a valid pointer when head != 0.
Change-Id: I5215f7dfc44924016c2d9b67ab2d9935b5164d7a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
setEnabled() would race with isEnabled()/isDebugEnabled()/etc.
Change-Id: I2004cba81d5417a634b97f5c2f98d3a4ab71770d
Reviewed-by: David Faure <david.faure@kdab.com>
Currently QJsonValue and QJsonValueRef behave differently in
regard to the default values leading to confusion compile errors
depending on which of the two types one is actually using. Before
this change it was possible to write:
QJsonValue value = jsonObject["item"];
QString name = value.toString(QStringLiteral("default"));
but not:
QString name = jsonObject["item"].toString(QStringLiteral("default"));
Change-Id: Id1185acf339aa3a91e97848e85d068f84552df71
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
On Unix systems where the GUI event dispatcher uses a notification
system for socket notifiers that is out of band compared to select(),
it's possible for the QSocketNotifier to activate after the pipe has
been read from. When that happened, the ioctl(2) call with FIONREAD
might return 0 bytes available, which we interpreted to mean EOF.
Instead of doing that, always try to read at least one byte and examine
the returned byte count from read(2). If it returns 0, that's a real
EOF; if it returns -1 EWOULDBLOCK, we simply ignore the situation.
That's the case on OS X: the Cocoa event dispatcher uses CFSocket to get
notifications and those use kevent (and, apparently, an auxiliary
thread) instead of an in-thread select() or poll(). That means the event
loop would activate the QSocketNotifier even though there is nothing to
be read.
Task-number: QTBUG-39488
Change-Id: I1a58b5b1db7a47034fb36a78a005ebff96290efb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In ICU the strength parameter decides whether a comparison is
case sensitive or not.
Fix mac comparison code. It can't have worked before.
Added some basic automated testing for QCollator.
Change-Id: I2646c464fd22ccd3a93c461fa3dba4bd1d4c7b4b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Some codecs can't handle the range outside ascii properly and would then
fail to read the data back in correctly.
Task-number: QTBUG-15543
Change-Id: I4c02921e787a939eeec0c7a11603b5896d756aef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If QNX does not have inotify there is no native engine.
Change-Id: I042efd0b59f916f9e0b55bbe5c7f3fe7bb6914c8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
[ChangeLog][QtCore][QSaveFile] Now follows symbolic links while writing to
a link instead of replacing the link with the contents.
Change-Id: I5afd519cb9f96ae68fa4c23c33a18de75671a301
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Qt5 allows QAIM subclasses to reimplement the sibling() method. Unfortunately,
the default QAbstractProxyModel's reimplementation differs in behavior to what
the Qt4 version was doing. In particular, the Qt4 version used to use the row
and column as positions within the proxy model, while the Qt5 version mistakenly
does this at the level of source model. This is arguably broken; the caller asks
for a sibling of the proxy index, not for a sibling within the proxy model.
This change makes the QAPM::sibling work explicitly in the same way as the Qt4
code behaved.
The reimplementation of QAbstractProxyModel::sibling was introduced in
9dfba89c28. It was subsequently fixed with commit
999109866d not to return indexes from the source
model, but the logic was still different from the Qt4 version.
[ChangeLog][QtCore][QAbstractProxyModel] Fixed QAbstractProxyModel::sibling to
work in the same manner as the Qt4 code used to behave. Previously, Qt5's
implementation would treat the row and column as positions in the source model
instead of a position in the proxy itself.
Followup-to 9dfba89c28 and
999109866d
Change-Id: Ia25027b2ad9e4777ba28de2d2226d48f8cccf587
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This brings QTimer::singleShot on par with QObject::connect in
terms of the new Qt5 syntax. With this patch, it is now possible
to connect singleShot to a member pointer, a static function
pointer and a functor (with or without a context object).
The short code path for 0 msec is not yet implemented - it will
require further modifications to QMetaObject before it will be.
An additional SFINAE on the new singleShot overloads had to be
implemented to prevent tricking the compiler into believing
const char * might be a function pointer.
[ChangeLog][QtCore][QTimer] Implemented new style connect syntax,
including functors, in QTimer::singleShot
Task-number: QTBUG-26406
Change-Id: I31b2fa2c8369648030ec80b12e3ae10b92eb28b4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It's a common need to assign a variable to something when entering a
code block, and then revert it upon exit. qscopedvaluerollback can
be used for this. But as a convenience, this patch adds an
extra constructor so that you can "protect" and set a variable
in one go instead of using two lines.
Change-Id: If4b89d3a5ba32ef2304bda058b1b6050932612ed
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The existing waitForNotified method has the design limitation that it
doesn't allow the tracking of multiple I/O operations on a single
file handle.
Therefore we introduce an additional method waitForAnyNotified that
returns a pointer to the triggered OVERLAPPED object.
Change-Id: I536ed7f6828daa2b0ce03f2d662eeb10aa89ca99
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QLockFile "noPermissions" test is not applicable with root
privileges.
Change-Id: I5779da524f24d0f1b9ef519d654856a6200da6bf
Reviewed-by: David Faure <david.faure@kdab.com>
Some of the QSaveFile tests are not applicable with root privileges.
Change-Id: I1a22906c0b14acf144f1849719152dfe9d79f426
Reviewed-by: David Faure <david.faure@kdab.com>
First and foremost, the STL-style iterators don't do this. Those don't
provide a guarantee that the container won't get shared again while the
iterator is active.
Second, there's no protection against a second mutable iterator being
created and resetting the sharable flag back to true.
[ChangeLog][Important behavior changes] The mutable Java-style iterators
like QListMutableIterator and QHashMutableIterator no longer set the
parent container to unsharable mode. If you create a copy of the
container being iterated on after the iterator, any changes done with
the iterator might affect the copy too.
Discussed-on: http://lists.qt-project.org/pipermail/development/2014-February/015724.html
Change-Id: Iccfe411d5558c85ae459cff944215614c392388e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
warning: typedef 'Foo' locally defined but not used [-Wunused-local-typedefs]
Change-Id: Ifb1213414feb3aa5a5e46dac163e51ccd4925498
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
