Try also /dev/graphics/fb0 in addition to /dev/fb0.
Change-Id: I9c7682af0c92ebdca806b7c9f60c67d4a732ff41
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Unhandled touch events cause QGuiApplication to generate synthetic
mouse event by default. This is good but on embedded systems, where
there is no windowing system and thus the platform cursor
implementation relies solely on QGuiApplication pushing position
updates via pointerEvent(), this causes odd behavior when there is
both a touchscreen and a mouse present.
The patch changes QGuiApplication to call pointerEvent() only when the
event is not synthetic. This will prevent the mouse cursor from
jumping to the position of the touch when using the touchscreen. It is
needed also because moving the mouse later would make the cursor jump
back to its previous, "real" mouse position anyhow which is extremely
annoying. This is now avoided.
Change-Id: I807a173bff7e2afa7eb66961a7ecc88b2c0430ca
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
The allows us to remove the custom logic in default_post for finding
the plist files, and also fixes issues when the wrapped mkspec had
its own feature files.
Change-Id: I4c26cf6a7809f527e170c51c57f59aaf6088774c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Some older QNX versions don't support SCREEN_PROPERTY_ALTERNATE_WINDOW,
so cover windows have generally been disabled on QNX.
Change-Id: Ibe4b0abc39eb8497571f88c90876571576708d79
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Since the datastream version is not set in previous versions of Qt when
streaming the state of the QHeaderView then we cannot rely on this when
adding new data to the state. Therefore we check if we read past the
end before assigning to the new variable.
Change-Id: I7128ffc91e47f9c8797cfa24d206a789d2814908
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Use the the legacy file engine object created in static function
QFileInfo::exists() as the engine of the QFileInfo object to prevent
memory leak. This can also boost a little performance.
Change-Id: I06317d158d487be5ef15fe3244a917a371563ac9
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Headers from mingw.org (4.7.2) declares _flushall only if __STRICT_ANSI__
is not defined ... Anyhow, we can as well use fflush(), which is in the
official standard.
Change-Id: Ic2b4d2ac724280f1304221be1fceab067af0c1f8
Reviewed-by: Samuel Gaist <samuel.gaist@edeltech.ch>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When b0b786a2f0 deprecated
QFontDatabase::supportsThreadedFontRendering() it made the
function inline also. That way compilers like gcc did not
export the symbol anymore.
Change-Id: If9c343eaa2ff90540decbc19b0af33d439c0bbaa
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
the problem is that there is no sed command on windows ... so build it
into qmake and invoke that from the generated makefiles. cmake does the
same, after all. ^^
Task-number: QTBUG-33794
Change-Id: Ib7077e18acbc5edd79f714c5779a5ed31ea6c093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The regular expression does not parse correctly when a device option value
contains the character '=' (e.g. QMAKE_CFLAGS="-D_FILE_OFFSET_BITS=64").
In order to break string at the first equal sign and to simplify code,
use "cut" command as in other places in configure script.
Task-number: QTBUG-33584
Change-Id: I05b474d2ba6bff84c1e40d00475963bab36d94b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Allows the macx-xcode mkspec to be a wrapper around other mkspecs.
Since QMAKESPEC can now be set in the spec, we have to ensure not
to append to QMAKESPEC.
Change-Id: Idf33ff38147f14c488f14b426c02d9a739fdaecf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When we build qml plugins, we now depend on embedding
the uri of the plugin into its meta-data using the new
-M switch to moc for static builds.
This patch will let this happen automatically whenever you
call load(qml_plugin) from your pro file.
With this patch, you only need to rebuild your plugin
to support static applications.
Task-number: QTBUG-28357
Change-Id: I99e2fc80688fa43cf734551553f4fa0cb5ed47ed
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The pointer can be null. Going trough the reference invokes undefined
behavior here.
Change-Id: Ia84e4e732cdcbbaee0f5f0679765d18069ea8b2d
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
The Xcode generator does not support exclusive builds, but still
generates projects that contain both debug and release configurations,
each with hard-coded differences such as whether or not to strip or
to generate debug symbols.
As a stop-gap solution we allow projects and mkspecs to add extra
settings that are limited to a given build. Long term we want to
rewrite the Xcode generator to support exclusive builds, but that
is a much bigger task.
Change-Id: I85056164bb1b3c8c6e0cf66410348cca7138eca5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Trying to do as few operations as possible once the file got opened.
That includes generating the data which will go in the file. Indeed if
we crashed at that point the lock file is already emptied. Could happen
because of the qAppName call. It's then safer to prepare the data
upfront, and just open/write/close if possible.
Change-Id: Iad32fa822c6a5958ae89d84a2fe02ed5366ea278
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Eases migration from QList to QVector.
Had to rename the 'length' parameter to mid() to suppress
-Wshadow warnings.
Task-number: QTBUG-3781
Change-Id: I755c6caefe4de81ea42a81b1c76aab728e639613
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Shared between UNIX and Win generators, and allows prfs after
default_post to rely on sane TARGET and DESTDIR values.
This allows us to clean up the DESTDIR logic in testcase.prf,
which was completely busted. Doing the two in separate commits
is unfortunately not possible as the old testcase.prf logic
was so broken it would barf if only looked at.
Change-Id: Ibf21216195c760ee46ae679c162b207b77a9d813
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The cursor needs to be within the view from start on Mac.
Task-number: QTBUG-33973
Change-Id: I313c9fd1c3a917e135a92497f1818d1b0d8b7698
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This module doesn't make much sense for iOS.
Change-Id: Iadcf3006e1e2bdd97c460e836e91717856cb118c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Iikka Eklund <iikka.eklund@digia.com>
Qt WebKit's HTML5 web notifications rely on QSystemTrayIcon::showMessage
to be invokable since the lower WebCore components can not link directly
to QWidgets.
Change-Id: I952de47ed8a90553a8f1ac30256d77ef6014da44
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Change check of QAtomicInt::load with the preferred ref() deref() pattern.
Change-Id: I12d2e24812259c16623c8a59cac30cafa4b05565
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Exclusive builds uses setExtraConfigs to apply the particular CONFIG
of each build pass. Unfortunately we were not applying these extra
configs early enough in QMakeEvaluator::visitProFile() for them to
be picked up/usable by default_pre, something that can be useful.
Change-Id: I423a4688250a15f0c1a2cc65a48f0bbc14ad4497
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The extra variables only need to be applied once, when we
are loading the pro file (and hence are loding pre files),
not for every single pri/prf that's loaded as a result of that
(which do not load pre files themselves).
Change-Id: I3118694a8eeccf2dc32c4f62df754033fad13528
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Enabling vsync and double buffering improves the overall impression.
Enabling by default helps to get the best "out of the box"
If not desired, one can disable this behavior via:
export QT_EGLFS_IMX6_NO_FB_MULTI_BUFFER=1
Change-Id: I21ce5366ea5829140d8103cf2dbd8c487d079db6
Reviewed-by: Donald Carr <sirspudd@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Make sure we deallocate the scaled rawfont, when it is not used due
to a cached engine being used instead.
This fixes a major memory leak in Qt WebKit when using Small Caps in the
complex font path. The complex font path is always used for small caps
since Qt 5.1.
Task-number: QTBUG-33576
Change-Id: I500db9ae6f6576734f1a972387a1a488218a9db6
Reviewed-by: pierre.rossi@digia.com
Reviewed-by: Pierre Rossi <pierre.rossi@gmail.com>
When CSS was set in the head tag then it was not being inherited by the
child tags. This ensures that the inhertiance happens and that the deeper
the CSS is set then it will ensure that it has precedence over the ones
set on the parent.
A test is added that shows the standard inheritance from the head tag and
the precedence from child tags in effect too.
Task-number: QTBUG-28770
Change-Id: I30be3ec141b2cd8d6e0db8a92669aed34da93b33
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Currently the mouse cursor is shown by default and it can be
turned off by setting QT_QPA_EGLFS_HIDECURSOR to a non-zero
value. This is now enhanced with an automatic detection step
via QDeviceDiscovery (the helper the input code use anyway).
From now on if QT_QPA_EGLFS_HIDECURSOR is not set, the cursor
is shown only if a mouse device is present in the system.
This could later be enhanced further by showing and hiding the cursor
dynamically during runtime although that will not be of much use for
embedded platforms without libudev.
Change-Id: I7e4b85ea8807200871c88fc42b11ab2adac90d32
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This avoids crashes in case where qWarning() would be called from a
global static deleted after the one holding the default category. I
encountered this case with a QLockFile locked from a global static while
the application quits, it was calling qAppName which was triggering a
qWarning as the qapplication object was gone too.
Change-Id: I8910e8559d063e8f0a737bae3da5edc481ab84d3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
The Qt Simulator is no longer supported with Qt 5.
Change-Id: I0f98351d482dd0554ea0754746d56f94ee6bf22f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The JNI classes in Qt Android Extras are changing name from QJNIXxx to
QAndroidJniXxx and they need to be friends of the private JNI classes
in core.
Change-Id: Ib5e1729f4bbba876b7d3eba5742fe750f95c48f7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The Android 4.3 keyboard will cause setComposingRegion() to be called when
backspacing over an existing word. If we don't implement that, the editor
will be out of sync with the input method.
Task-number: QTBUG-32955
Change-Id: I6c4ff786269a4e74c70a093c5f03c4c5a5727dd5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
When outputting the deployment settings on Windows, the paths might
have backslashes. These need to be escaped, otherwise they will simply
be removed by the JSON parser (or converted into whatever they happen
to represent given the neighbouring character.)
Task-number: QTBUG-33926
Change-Id: I11f1bc7d1f8082c73329bdc02fb8d653a0b5c0ee
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Before we add the current cluster we need to check if there's
space for it. Calling checkFullOtherwiseExtend() also has
the side effect of resetting the space data. We would add
the cluster without checking for space when showing separators,
causing broken behavior like we would count the space in the
current item as trailing space, which would make us chop the
end of the string.
Task-number: QTBUG-28832
Change-Id: I8169662218ff6e645575d4e89a57f6b234f3c4cb
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
When targeting API level 13 or higher, you need to explicitly
subscribe to configuration changes for screen size, otherwise
surfaceChanged() will not be called when you change the
orientation of the screen.
Task-number: QTBUG-33140
Change-Id: I48fd1d298c408802d1743736f62128cd0eec8983
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Separating the compositor into a separate source file improves the
chances of possible future reuse and paves the way to supporting
multiple GL windows. Tooltips are now working too. Implemented a few
window functions like raise() and lower(). Fixed the qFatal for
multiple GL windows to be raised in non-SDK based Android builds too.
Change-Id: Id94d2fb2a4382766f3d130eebe1e6f397a535852
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This seems to cause issues with menus on certain Windows machines.
Task-number: QTBUG-33653
Change-Id: I8c31dd3ba5ccc6eb0551048401051d819f49a8c1
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
For MSVC 2008 make_tuple is in the tr1 namespace.
Change-Id: I4a51f6cabdf068993869b404b12ed1484a21a9d4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
