Just moved applyCursor() and defaultCursor() to a #ifndef block.
Change-Id: I14c21aa509395fb1bd72d389cfc46f0f34ab7649
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Change the checking for created EGLNativeWindowType so that zero
is a valid value. This is the case e.g, with BeagleBoard, where
widget application cannot be run without this change.
Change-Id: I36c30091e1a5a0598ae3822d0be8dc4362779c0b
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
If a widget is deleted as a result of a window activation changed then
it is possible that the parent does not clear the focus because of the
activation change. If the focus child is actually part of an embedded
widget in the graphicsview then it needs to be handled explicitly in
this case too.
Change-Id: I3e7a2b963f175828de4c19283178560abca91235
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Forward-port of cb7f32f5b861fe115fa71f64500a5cbb0b643f1b (Mark
qt4_use_modules and qt4_automoc as obsolete., 2013-07-04) from
cmake.git.
Change-Id: I0c24408ef06bc93eb0e55108cf4eab2f8cbd19cb
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We would resize the backing store without resizing the viewport,
which would cause all subsequent blits of the backing store to the
screen to look broken.
Task-number: QTBUG-32146
Change-Id: I65bae051b7cfbbc61fc285e4baa74685d5639569
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
If a state was restored but not all the dockwidgets that were available
before are available at the time of restoration then when dragging a
dockwidget to where the unavailable one is expected to be would cause a
crash.
Change-Id: I829d93041b7950a3546ba4e6c3764b169f276315
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The window should react to the wheel event (e.g. scroll content)
but without becoming focused; this is the X11 convention.
Task-number: QTBUG-32517
Change-Id: I7e12425e5a6e1549b7f23dc318612a436c24d14b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
There is no signal for it in gtk font selection. We should emit this
signal just before accept() was emitted.
Change-Id: Ie31d96b789436607b134c84dd77a4b9be9e9a550
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Without it the invocations were working but were not listed on introspection
Change-Id: Ie62f7dc3577f52b6888ddebf0392fdf51f2845d5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
OpenGL ES doesn't allow internal format to be different
from external format, so always do the conversion from
BGRA -> RGBA. We are anyway iterating over all the
pixels so the performance impact of this should be
minimal.
Change-Id: Ie891665ad66e31692b69db02d34be8d303a7d631
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
In the Help mode in Qt Creator, many have accustomed to search e.g.
for 'qmake variable reference' which no longer exists as a title in
the qmake documentation.
This change provides easier access to the qmake reference by
creating keywords for them, making them appear in search results
for searches starting with 'qmake'.
Task-number: QTBUG-32268
Change-Id: If60a0cdc11464a8aeb50c62ddbde9683326e1384
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
The QWindow::resizeEvent documentation states that resizeEvent
is invoked after the windowing system has acknowledged a
setGeometry() or resize() request.
The Cocoa plugin however did set the platform window geometry
immediately so that the qnsview's updateGeometry returned too
early.
Task-number: QTBUG-32706
Change-Id: I1f359ab368833d174ab6740f4467b0848c290f13
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Assigning a -1 to type is going to make things crash since
it basically means unresolved and when you try to access the string data
go to a index that doesn't exist
So what I do is save the return type in rawReturnType if it is a raw
one and reassign the type to IsUnresolvedType | strings.enter(mm.rawReturnType)
instead of -1 when "saving" the metaobject
Task-number: QTBUG-32671
Change-Id: I67898dea8a1926eee80c16417e877ef4e22aa06b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMetaMethod::invoke(..) takes fixed number of arguments for execution.
Adding preprocessor macros which literaly equals this number would be
useful for writing some generic code.
Task-number: QTBUG-31821
Change-Id: Ia2faf291f3f7df44a47c3cf18f5cd587d37d7d2e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also clarify documentation for OSes with variants. Q_OS_ANDROID should
have been called Q_OS_LINUX_ANDROID and Q_OS_BLACKBERRY should have been
Q_OS_QNX_BLACKBERRY.
Task-number: QTBUG-15402
Change-Id: I3a34d52a1c0ebb8eb73284bdf198443c209a5fd4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
CFPropertyListRef is a typedef for void*, which is why this code was
compiling OK prior to this change.
Change-Id: I78d65652a76721434056bd9f6d011917e2864125
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch fixes a compatibility with Qt 5 and Microsoft C++ /clr mode.
The QList copy constructor defines a Cleanup class that causes LNK2005
errors. It is a compiler problem, but the patch is simple. The use of
QT_TRY/QT_RETHROW instead of a Cleanup class is more consistent with other
Qt code, so is arguably preferable even without the compiler bug.
Task-number: QTBUG-31949
Change-Id: I1acfbae1924f0a52ffb8d9722b52e01b61edd42e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixes race between QDBusConnectionPrivate::processFinishedCall()
releasing the mutex before emitting signals (using various members of
QDBusPendingCallPrivate) and deletion of the QDBusPendingCallPrivate
object through QDBusPendingCall::d's destructor (a member of type
QExplicitlySharedDataPointer<QDBusPendingCallPrivate>) leeds to
segmentation fault with CrashTest example on slow/single core
arm cpu).
Task-number: QTBUG-27809
Change-Id: I3590d74d1cfa5816ede764b50b83a7008ec780ff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
First step to fix race condition about deleting QDBusPendingCallPrivate.
In a multithreaded application on a slow/single core cpu the following
race (and segmentation fault) can occur:
First thread A is running:
A: QDBusPendingReply<> reply = pi->asyncCallWithArgumentList(method, argumentList);
Then when the dbus answer arrives thread B will call:
B: QDBusConnectionPrivate::processFinishedCall()
B: ...
B: locker.unlock()
and runs until here, go on with thread A:
A: reply.waitForFinished();
A: QDBusPendingCallPrivate::waitForFinished()
A: {
A: QMutexLocker locker(&mutex);
A: if (replyMessage.type() != QDBusMessage::InvalidMessage)
A: return;
which returns immediately (mutex acquired, replyMessage alread set), now
reply goes out of scope (destructor called) and QDBusPendingCall::d's
destructor of type QExplicitlySharedDataPointer<QDBusPendingCallPrivate>
deletes the reference counted object QDBusPendingCallPrivate.
Now thread B continues, still in processFinishedCall()
B: if (call->watcherHelper)
B: call->watcherHelper->emitSignals(msg, call->sentMessage);
B:
B: if (msg.type() == QDBusMessage::ErrorMessage)
B: emit connection->callWithCallbackFailed(QDBusError(msg),
B: call->sentMessage);
accessing alread deleted object QDBusPendingCallPrivate via call->...
Fixed QDBusPendingCallPrivate deletion by proper reference counting
will be done in the next commit.
Task-number: QTBUG-27809
Change-Id: I15b3f0242471b62eaafadc763fb6a33339ff2fe1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In QDBusConnectionPrivate::waitForFinished() pcall->pending was used
after the protection by pcall->mutex was released. A simultaneous
call to QDBusConnectionPrivate::processFinishedCall() was able
to reset pcall->pending to null before it was used for the
q_dbus_pending_call_block(pcall->pending) call.
Fixed by releasing (and setting to 0) of pcall->pending in
processFinishedCall() only in case no one is waiting yet, otherwise
release pcall->pending by the first thread waiting in waitForFinished().
There is still a race condition about deleting QDBusPendingCallPrivate
(too early) which will be fixed in the next two commits.
Task-number: QTBUG-27809
Change-Id: I040173810ad90653fe1bd1915f22d8dd70d47d8c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When readData() is called repeatedly, we need to keep track which
part of the multipart message we are currently reading from.
Hereby we also need to take the boundary size into account, and not
only the size of the multipart; otherwise we would skip a not
completely read part. This would then later lead to advancing the
read pointer by negative indexes and data loss.
Task-number: QTBUG-32534
Change-Id: Ibb6dff16adaf4ea67181d23d1d0c8459e33a0ed0
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
On the Android Emulator, the shaders will be compiled by a desktop
GL driver, since the GL driver in the emulator is just a thin
wrapper. The GL driver does not necessarily support the precision
qualifiers, which can cause applications to break. We detect this
at runtime in the platform plugin and set a workaround flag to
Task-number: QTBUG-32557
Change-Id: Ied00cfe8e804d1f7862697dd379a14f3bed3d980
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Before this patch we always send mouse events for each
touch event that happens.
This is redundant (we already synthesize in
QGuiApplicatioin) and breaks some touch handling
in QtQuick2.
Change-Id: I4bc1686a7a46039901315619a0acdf2888ad6775
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
On Android, when not using Ministro, we cannot read certificates
from the file system, so we have to get them through Java APIs instead.
Change-Id: I415329fcb45836735c1112dbe832214b3c73dc9a
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This patch now also copies the state of the QPainter returned from
QPaintEngine::painter for the first page of a print preview, as it is
done for all other pages of a preview in QPreviewPaintEngine::newPage().
Task-number: QTBUG-30621
Change-Id: I50001231c4006b9627ff80504618cbe0fa6d9f65
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
The Qt Quick demo Tweet Search works again, add it back as
one of the highlighted examples.
Task-number: QTBUG-31745
Change-Id: I4fc7d1a836159e9bb54fcd9e1a9c2760d97aa80a
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
We're rolling back exception safety support
Task-number: QTBUG-32642
Change-Id: I25f20b554a93f25d00cca19b3e308d6cc8fe85e2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Several QOpenGLContext methods fails incorrectly on QWindows from EGL or
MinimalEGL. This is happens because they are incorrectly marked as raster
surfaces instead of OpenGL surfaces.
Change-Id: Ic9b3859915a9049fce442216b01dce89521fa5ee
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Tests are passing nowaways on OS X.
Task-number: QTBUG-27890
Change-Id: I6a0a881ece844ef931cb8af51b58d33c40be4d2c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The c_rehash'ed symlinks are always there on QNX, so no need to check
at every app start for the feature. This saves ~ 17ms at each app
start.
Task-number: QTBUG-32549
Change-Id: Ia9df60aba9d1bd70868b7004b847867a2128f600
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Added full path to src dir for testdata.
Task-number: QTBUG-32535
Change-Id: I38e96216e9a016869151adf0ae995e068b8b5354
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Added full path to src dir for testdata.
Task-number: QTBUG-32536
Change-Id: I5ef215d451a6407c277d2c98f21ffc35a8657e28
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
If some of the X11 requests fail, QXcbXSettings::QXcbXSettings() prints a
warning and returns. These error paths all caused memory leaks.
Change-Id: Idfecf03dd412c35552c3bbbebdda9c039aeadc13
Signed-off-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This option is required to build qtmultimedia without
Windows Media Foundation backend. In this case,
a full DirectShow backend will be build instead.
Change-Id: Ib29ba81ca6cbb00b609cc97fab7da29e61d31d6d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
Now arm specific -mfloat-abi flag is added to compiler flags
only for arm architecture in linux_arm_device_post.conf.
Change-Id: Ie77ac6e0717d9d1fd9c14e1d6a26e86f08ab418c
Reviewed-by: Jarosław Staniek <staniek@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Qt::HANDLE is always defined as 'void *' on Qt 5.0
Task-number: QTBUG-32469
Change-Id: I3f0f2b19e65d54c88604e1cb65b5791c456b3003
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
