The ui_XXX.h include did not match the location of the XXX.ui file, and
AUTOUIC failed with
"SRC:/addtorrentdialog.h"
includes the uic file "ui_addtorrentform.h",
but the user interface file "addtorrentform.ui"
could not be found in the following directories
"SRC:"
While this could be fixed by adjusting the include paths properly, this
would complicate the CMake project file, and we're dealing with an
example where needless complexity would cloud comprehensibility.
Move the .ui file next to corresponding source files instead.
This removes the need for any special cases in CMakeLists.txt, and we
can remove .prev_CMakeLists.txt.
Fixes: QTBUG-87457
Pick-to: 6.1
Change-Id: Ic2dec5ded7100e22d5afc571efc4b009bc62e41c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
As well as the MACOSX_BUNDLE properties as necessary.
Task-number: QTBUG-87664
Task-number: QTBUG-86827
Change-Id: I7677449a26d51fa853bd67bab6b3b61afbd2b12f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The change creates a slight source incompatibility. The main
things to take care of are
* code using printf statements on list.size(). Using qsizetype in
printf statements will always require a cast to work on both 32
and 64 bit.
* A few places where overloads now get ambiguous. One example is
QRandomGenerator::bounded() that has overloads for int, uint and
double, but not int64.
* Streaming list.size() to a QDataStream will change the format
depending on the architecture.
[ChangeLog][QtCore][QList] QList now uses qsizetype to index into
elements.
Change-Id: Iaff562a4d072b97f458417b670f95971bd47cbc6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Yet Another Side Effect of not keeping iterator stability.
Although not idiomatic, the pattern
while (i != e) {
auto cur = i++;
if (cond)
erase(cur);
}
was actually correct. Move to the idiomatic erase pattern
instead (it = cont.erase(it)).
The example still has memory problems all over the place on
shutdown. At least now it doesn't crash when running.
Change-Id: I30bd2c4e2b3fa7fe4e28d4426ff3d894b9bae103
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Use case-insensitive endsWith() instead of lowering a QString and then
comparing case-sensitively.
As a drive-by, replace ascii string literal with char16_t one.
Change-Id: Id4d8e5b197baba7aa3ae4c2ae57414c1242b3827
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Due to QChar being convertible from almost any integral type,
the old code actually called QString::remove(QChar).
Fix by using QString::chop() instead.
Change-Id: I345b018aa137ecff608a130e69ade5d37ef0805c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
This reverts commit ccb2cb84f5 and
commit 0f568d0a67.
The patches fix ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commits to keep the getter as is and change the signal name instead.
Change-Id: Iddbab7c33eea03826ae7c114a01857ed45bde6db
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the signal) is deprecated; superseded by errorOccurred()
Change-Id: I11e9c774d7c6096d1e9b37c451cf0b99188b6aad
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This reverts commit 94b3dd77f2.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I0dd60cf1ae9d1bd95beeb8ad58661ca4b1fb63b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I made a clazy automated check that replaced the use of QVariant::Type
by the equivalent in QMetaType.
This has been deprecated since Qt 5.0, but many uses were not yet removed.
In addition, there was some manual changes to fix the compilation errors.
Adapted the Private API of QDateTimeParser and QMimeDataPrivate
and adjust QDateTimeEdit and QSpinBox.
QVariant(QVariant::Invalid) in qstylesheet made no sense.
But note that in QVariant::save, we actually wanted to use the non-user type.
In the SQL module, many changes were actually reverted because the API
still expects QVarient::Type.
Change-Id: I98c368490e4ee465ed3a3b63bda8b8eaa50ea67e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The one that is a getter for the last error found. This is to disambiguate
the expression '&QAbstractSocket::error'. Introduce a new member-function
socketError as a replacement.
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the getter) is deprecated; superseded by socketError().
Task-number: QTBUG-80369
Change-Id: Ia2e3d108657aaa7929ab0810babe2ede309740ba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Cleanup network examples:
- use nullptr
- use member-init
- adjust includes
- use new-style connects
Change-Id: I80aa230168e5aec88a1bc93bbf49a471bfc30e7b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
* Simplify add_qt_gui_executable() to not require WIN32/MACOSX_BUNDLE
but provide it implicitly. It's redundant :)
* When on Android, build a module (shared library), just like qmake.
This requires an additional library destination in the install() call,
but that's ignored on other platforms.
* Fix typos in the android deployment generation settings function
* Use the correct cache variable to determine whether we're inside a Qt
build or not. Right now this only works inside Qt builds anyway as
QtPlatformAndroid.cmake is not publically accessible.
Change-Id: If1c763c31a7a83d0e0d854362ba7901657f63eb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Provide add_qt_gui_executable() as function in our public API that takes
care of automaticWinMain linkage. We can use this in the future to
encapsulate similarplatform-specific behavior and adjustments, such as
module generation onAndroid.
In order for the examples to see the function in Qt5CoreMacros, three more
additional fixes were required:
* Do the build_repo_end() call _before_ attempting to build the
examples, as we need the build_repo_end() to include QtPostProcess
and complete the creation of all the target config files.
Otherwise the find_package() calls in the examples see something
incomplete.
* Add more QT_NO_CREATE_TARGET guards
* Always call find_dependency on the dependencies, regardless of the
target creation mode. This way a find_package(Qt5 COMPONENTS
Widgets) will still load Qt5CoreMacros.
Change-Id: I03ce856e2f4312a050fe8043b8331cbe8a6c93e6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Create CMake config files which can be used from the very same CMake
project. These CMake config files simply do not create any targets,
controlled via the QT_NO_CREATE_TARGETS.
This patch also allows to build qtbase.git:examples as a standalone
project, against an already-built Qt.
Ran this:
ag -s "QT " examples -l -0 | xargs -0 -n 1 .../util/cmake/pro2cmake.py --is-example
Task-number: QTBUG-74713
Change-Id: I44cce5a4048618b30f890c5b789592c227a8b47d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This came about trying to remove the Java-style iterator. It was used to
iterate in reverse order, something QMap can't do, easily, due to lack
of rbegin()/rend(). Instead of writing ugly loops, use a vector of pairs,
fill it, sort it, then iterate over that one in reverse.
Change-Id: I09c8a2732a0699fff4c497778745523e20d348a1
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Scope a previous iterator variable better so we can re-use 'it' as the
iterator name.
Change-Id: I46d239ad2d3646168408d1ef29ed74fd07bc663f
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The function is const, but the d-pointer doesn't propagate it (raw pointer),
so we need the qAsConst() even here.
Change-Id: I9d2e1f7715abb3dc67a87cdadaa7ded971b15848
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The old code iterated over the peer list, inserting active peers into
a QSet, curiously not stopping to search for clients if it had already
determined the peer to be active.
It then iterated over the peers again, storing the indexes of the
peers it had determined to be active in the first loop, in a QList.
It _then_ iterated over the index list, in reverse, calling removeAt()
on the peers list.
<sean parent>That's a remove_if!</sean parent>
The twist is, that only some maximum number of inactive peers should
be removed, just enough to bring the number of peers below a
predefined number.
To solve, use a lambda that keeps track of the number of times it has
returned true, returning false once the count drops to zero. We can't
use a mutable lambda here, since the STL algorithms are allowed to
copy the predicate as many times as they wish, and, indeed, remove_if
is commonly implemented by calling find_if. But the standard
guarantees exactly one application of the predicate per element, so we
can assume that we're not called again on the same element, and
therefore keep a reference to an external count.
With this, what was a horrible mess becomes a single call to remove_if.
Also change a while(--n) c.removeFirst() loop to a single call of
range-erase.
Change-Id: I6c6a54a1805e5b376800e1116e7aec643e95e4e1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Java-iterators are going to be deprecated.
Change-Id: I2e6353f3fd9e2ddaf0767e7f6cea713249d9591e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Replace deprecated functions to be able to compile examples with
QT_DISABLE_DEPRECATED_BEFORE=0x050d00
Change-Id: If6b8de31f526320d6a0e2a20bb5f8e26c77f2353
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Replace deprecated foreach macro with range-based for loop
Change-Id: I0d1f2cfd557d02ccc48b41b3fea137baa2962fc1
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We move QInternalMimeData to a separate file, because this class is
used, even if draganddrop is disabled. From now on, include
qinternalmimedata_p.h instead of qdnd_p.h for QInternalMimeData.
Change-Id: I594e08e2e90d574dc445119091686b4b69e4731b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Compiling the default examples should be possible without compile errors.
Task-number: QTBUG-53141
Change-Id: I73d8787241291ae6230861a89b38e91d900fede0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
