This fixes the flakiness seen in OpenSUSE KDE/X11 desktop.
Fixes: QTBUG-70590
Task-number: QTBUG-105177
Change-Id: I7c2431e58b2a60ea04e26d4e70c0f2867d544ff2
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Several classes in QWidget use QDataStream internally in order
to save and restore state. These QDataStream usages were not
versioned, meaning that if Qt changes the serialization for some
datatype, then the data saved between different Qt versions becomes
incompatible. Note that the save/restore API in question just produce
opaque blobs as QByteArrays -- the user has no control over the
QDataStream objects and thus versions.
Fix by version the usages.
In QHeaderView this has caused a regression because QBitArray *did*
change version between Qt 5 and 6. In general, using QDataStream without
explicit versioning is a mistake, so deploy the same fix elsewhere as
well.
Fixes: QTBUG-99487
Pick-to: 5.15 6.2 6.3
Change-Id: I82bb5c266f4e5dedc0887cbef855dccab1015e29
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: <doctor.whom@gmail.com>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
QHeaderView creates persistent indexes in
_q_sectionsAboutToBeChanged(), called by the slot connected to
rowsAboutToBeMoved/columnsAboutToBeMoved.
In the case of rows, QAbstractItemModel emits the signal *before*
preparing to update persistent indexes in itemsAboutToBeMoved(),
so it can see the ones newly created by QHeaderView, all is well.
In the case of columns, the emit was done *after* calling
itemsAboutToBeMoved(), so the additional persistent indexes created by
QHeaderView were ignored, and in endMoveRows() we could end up with:
ASSERT failure in QPersistentModelIndex::~QPersistentModelIndex: "persistent model indexes corrupted"
This bug has been there since the very beginning of beginMoveColumns(),
but was undetected because moving columns in a model is pretty rare
(in my case there's a QTransposeProxyModel that turns columns into
rows in the underlying model, and a proxy that handles dropMimeData...)
Pick-to: 6.3 6.2 5.15
Change-Id: I74bad137594019a04c2a19c2abb351ff3065c25a
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
There was a test for Qt4 compatibility in tst_qheaderview.
We don't run it since Qt 6.
This patch removes the unused code.
Change-Id: I751829ac5a142e79379e81e9e739107544cf7406
Reviewed-by: Arnaud Bienner <arnaud.bienner@gmail.com>
Reviewed-by: David Faure <david.faure@kdab.com>
The QSinglePointEvent ctor assumes that the given globalPos is correct,
so it was wrong that the QHoverEvent ctor passed along a local position
as global. It's better to require globalPos as an argument; and in fact
it seems that everywhere we construct a QHoverEvent, global position is
available, or possible to get by transformation (which is better than
resorting to QCursor::pos()).
Also, don't convert to QPoint: pointer events have qreal resolution and
there's no reason to truncate them.
Fixes: QTBUG-100324
Change-Id: I919455da36265988d3d149eb97563c9ed0d2c660
Pick-to: 6.3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
QHeaderView sorting may be triggered when the user performs
some mouse interactions that should really not result in sorting.
Generally speaking, this happens when the user:
* presses on a non-movable section (A)
* moves on another section (B)
* releases on that section
resulting in B becoming sorted / flipping sorting.
(Non-movable is required, otherwise dragging would cause section moving,
not sorting.)
To make the matter worse, QHeaderView doesn't check that the release
happens within its geometry. This makes sense when moving sections: one
is able to drag a section horizontally/vertically even if the mouse
leaves the QHeaderView.
But when not moving sections, this means that one can
* press on section (A),
* move the mouse anywhere vertically (for a horizontal bar, mut.mut
for a vertical) above or below another section (B), that is,
outside QHeaderView's geometry
* release the mouse
and cause B to be sorted.
Fix it by
1) remembering which one was the section that the user originally
clicked on; that's the only one that can possibly become sorted
(if we're not moving and other conditions hold). No other variable
seemed to remember this.
2) on release, check that it happens within that section's geometry.
If so, sort.
Pick-to: 6.0 5.15
Change-Id: Icfb67662221efbde019711f933781ee1e7d9ac43
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
If one clicks on a QHeaderView's section, the header view will
sort the view by the respective column/row. By clicking multiple
times, one is able to toggle the sorting between ascending
and descending. Something that is NOT possible to do however is to
un-sort the view -- that is, to restore the model's original
sorting. This must be done via code, by asking the header or the
view to sort by section -1.
This commit adds new property to QHeaderView to make it possible
to unsort models. Basically, the sort indicator becomes a tri-state:
sort ascending, sort descending, unsort (sort by column -1).
[ChangeLog][QtWidgets][QHeaderView] Added the sortIndicatorClearable
property. Setting this property allows the user to clear the sort
indicator on a section, resetting the model to its default ordering.
Change-Id: Ibf4e280b2086b75ccd64d619ea4d70816dc3529f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
QChar should not be convertible from any integral type except from
char16_t, short and possibly char (since it's a direct superset).
David provided the perfect example:
if (str == 123) { ~~~ }
compiles, with 123 implicitly converted to QChar (str == "123"
was meant instead). But similarly one can construct other
scenarios where QString(123) gets accidentally used (instead of
QString::number(123)), like QString s; s += 123;.
Add a macro to revert to the implicit constructors, for backwards
compatibility.
The breaks are mostly in tests that "abuse" of integers (arithmetic,
etc.). Maybe it's time for user-defined literals for QChar/QString,
but that is left for another commit.
[ChangeLog][Potentially Source-Incompatible Changes][QChar] QChar
constructors from integral types are now by default explicit.
It is recommended to use explicit conversions, QLatin1Char,
QChar::fromUcs4 instead of implicit conversions. The old behavior
can be restored by defining the QT_IMPLICIT_QCHAR_CONSTRUCTION
macro.
Change-Id: I6175f6ab9bcf1956f6f97ab0c9d9d5aaf777296d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
We want to re-enable Android tests in QTQAINFRA-3867. However,
many tests are failing already preventing that from happening.
QTBUG-87025 is currently keeping track (links) to all of those
failing tests.
The current proposal is to hide those failing tests, and enable
Android test running in COIN for other tests. After, that try
to fix them one by one, and at the same time we can make sure
no more failing tests go unnoticed.
Task-number: QTBUG-87025
Change-Id: Ic1fe9fdd167cbcfd99efce9a09c69c344a36bbe4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use QScreen APIs instead.
Change-Id: Ie99af94fe4292223dbb165b3f5c1b74e8fe0498b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This attribute is now on by default.
Change-Id: I7c9d2e3445d204d3450758673048d514bc9c850c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Remove QDestopWidget public header, simplify the implementation that
maintains a Qt::Desktop type QWidget for each QScreen, and turn
QWidget's initial target screen into a QScreen pointer.
QApplication::desktop() now takes an optional QScreen pointer, and
returns a QWidget pointer, so that applications and widgets can get
access to the root widget for a specific screen without having to
resort to private APIs.
QDesktopWidgetPrivate implementations to look up a screen for an index,
widget, or point are now all inline functions that thinly wrap
QGuiApplication::screens/screenAt calls. We should consider adding those
as convenience APIs to QScreen instead.
Note that QWidget::screen is assumed to return a valid pointer; there is
code that handles the case that it returns nullptr (but also code that
trusts that it never is nullptr), so this needs to be defined, verified
with tests, and asserted. We can then simplify the code further.
Change-Id: Ifc89be65a0dce265b6729feaf54121c35137cb94
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Either by testing for platform name or window activation.
After this gets in, we can enable widget tests in the Wayland bot, which
hopefully will reduce the number of regressions in the Wayland plugin.
Fixes: QTBUG-62188
Change-Id: I71ce8abd6b5891e5b953126b1c35345892585931
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
When calculating the header section size based on its contents when a
stylesheet is used, the size hints from the stylesheet are used. In case
if the stylesheet specifies only one of the sizes, the other is set to
-1. Because of this the actual content size is ignored.
The solution is to calculate the size based on the application style, in
case if it's not specified in the stylesheet.
Fixes: QTBUG-75615
Change-Id: I3453fa623d75b6b32832edf753de6e3e4e7f5a22
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Cleanup QHeaderView autotest:
- use range-based for loops
- use nullptr
- use member initialization
- use new signal/slot syntax
- use static invocations
- use override
Change-Id: I4df0b46c58ae9ae9dd4d9762390a2b14886aa68f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
For tst_QFrame and tst_QOpenGLWidget, force scaling off
since they do screen captures which would fail with
scaling activated due to different device pixel ratios.
For tst_QGraphicsItem and tst_QHeaderView, force
scaling on for Windows since some tests otherwise fail
due to violation of the minimum size constraints of
framed windows on Windows.
The tests will then pass regardless of any environment
setting of the scaling variables on a developer
machine.
Change-Id: Iefa4e84b433f7e51dce4e416546a9eda8ee6d0f1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This patch was generated with tooling from patchset 31 of
https://codereview.qt-project.org/c/qt/qtqa/+/267034 in interactive
mode. General platform names were chosen if greater than 60% of the
currently active platforms of a given type in COIN recently failed.
Change-Id: Ia4bde7f0ec422bbb727dc9d7151295159094f146
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If columns are removed and we get notified via layoutChanged, the code
tries to restore old section sizes, and went out of bounds, leading to
an assert in QVector. Simply add an if() to skip restoring out-of-bounds columns.
This comes from https://bugs.kde.org/show_bug.cgi?id=395181,
which translates into the unittest that is part of this commit.
Change-Id: Ide42176a758f87b21957c40508127d67f1d5a2d9
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Conflicts:
tests/auto/widgets/itemviews/qheaderview/tst_qheaderview.cpp
Added tests/auto/testlib/selftests/expected_crashes_5.txt to work
round the output of the crashes test (which exercises UB, see
QTBUG-73903) being truncated on one test platform.
Change-Id: I9cd3f2639b4e50c3c4513e14629a40bdca8f8273
Still do a begin/end reset model in place, which is probably not the
best code but since it's a test and it works it should be enough
Change-Id: Iffaf8d69d5be64ef5e1e359e3d90a1e8174fc13b
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
it's using deprecated reset() model that we don't support anymore since
"this is Qt6", so include the 2 lines in the code.
This makes for bad code but since it's a test and it used to work i
guess it's good enough
Change-Id: Ia906fe40359ddc0defb10795cf12a17498124983
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
tst_QHeaderView::defaultSectionSizeTest() fails on High-DPI screens
because the default minimum section size is greater than the values used
for testing the header sizes. Therefore the test will fail.
Fix it by explicitly setting the minimum header size to something
smaller than the test values.
Also add a debug line to output the default minimum section sizes so
other failures due to this problem can be debugged better.
Fixes: QTBUG-73309
Change-Id: I257f341cef9381f140aa4d4f68376c5edadc39cc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This is required to support the new emoji font on Android 9.
[ChangeLog][Freetype] Upgraded bundled Freetype version to 2.9.1.
This also adds support for the latest emoji font in use on
Android 9.
Fixes: QTBUG-70657
Change-Id: I99be72f0d23c20aca122b8fdadd4ded87b2edce1
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
QHeaderView::initializeSections() was calling updateHiddenSections()
with wrong parameters which lead to an inconsistency in the hidden
section handling.
updateHiddenSections() needs the first and last index which got removed.
Therefore we must pass the new section count for logicalFirst.
Fixes: QTBUG-55461
Change-Id: Ica06125cf19bdd500f55fd9cd59ace1795f3703f
Reviewed-by: David Faure <david.faure@kdab.com>
