Change-Id: I1972da2ead51274771ff24b4c506c2b581ee6abe
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
There are plenty of other examples showing how to use QStateMachine
Task-number: QTBUG-60635
Change-Id: I82300b2a0f4e7733f08579a2aa9b548cb7d87efa
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
I updated signals and slots and for each loops to the new syntax and
replaced most free functions with std::function.
Task-number: QTBUG-60641
Change-Id: I7693f81f71c7f53fcbe83189a0de2fb76ddf99a8
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
They are not updated after switching tabs. Thus they can be enabled even
when no entry is selected: select an entry on the current tab and then
switch to an empty tab.
Emit AddressWidget::selectionChanged() signal after changing the current tab
to update these actions.
Change-Id: I00da15ed6c3d3839210ae3ffbe1436e234695522
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Introduce nullptr and replace foreach with new C++11 range based for
loops. Minor fixups of signals, file dialog usage.
Apply the same changes to the ItemViews/puzzle example since it
shares parts of the code with DragAndDrop/puzzle. Make some
changes to both examples to that the diff of the two becomes
small for easier comparison.
Task-number: QTBUG-60635
Change-Id: I8af824229ebac24d6ec151eae92176d227695490
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Introduce Contact struct to store contact data and use it
instead of QPair<QString, QString>. Proper naming really
clarifies the code.
Task-number: QTBUG-60635
Change-Id: Ibfb421dfc854accc382212b0da46e7aafc0d528a
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Upgrading to a recent Vulkan SDK (e.g. 1.0.61) leads to getting
a few previously unseen warnings from the validation layers.
Fix these:
vkDebug: ParameterValidation: 8: vkCreateSampler(): The
samplerAnisotropy feature was not enabled at device-creation
time, so the maxAnisotropy member of the VkSamplerCreateInfo
structure must be 1.0 but is 0.000000.
vkDebug: DS: 461375808: vkCmdPipelineBarrier():
pImageMemBarriers[0].srcAccessMask (0x4000) is not supported by
srcStageMask (0x1). The spec valid usage text states 'Any given
element of pMemoryBarriers, pBufferMemoryBarriers or
pImageMemoryBarriers must not have any access flag included in
its srcAccessMask member if that bit is not supported by any of
the pipeline stages in srcStageMask, as specified in the table of
supported access types.'
vkDebug: DS: 6: vkCmdDraw(): Cannot use image 0x7 with specific
layout VK_IMAGE_LAYOUT_GENERAL that doesn't match the actual
current layout VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL.
vkDebug: DS: 61: Descriptor set 0xc encountered the following
validation error at vkCmdDraw() time: Image layout specified at
vkUpdateDescriptorSets() time doesn't match actual image layout
at time descriptor is used. See previous error callback for
specific details.
Change-Id: I1a3200221ac725c2fa661eff3ac075262b9355c2
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
It's the one that is more complex - with a text-based 'progress-bar'
and queueing (for some, probably educational, reason) of requests.
Changes:
- update the C++ syntax (mem-initializers, range for, etc.)
- new-style headers
- redirects should not result in creating an empty file. Since we
have no UI, and this example is already complex enough, settle
for just reporting the redirect and removing the empty file.
Task-number: QTBUG-60628
Change-Id: I0b69cd77414ecac7c0bc6b2f8f787befc978de28
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Mainly 'modernizing' - use <c...> c-library includes (<stdio.h> -> <cstdio>),
add appropriate using directive; minor fixes in formatting + removal of a
hated double negation (aka ifndef QT_NO_NOTHING). Also, as our rules
('how to write examples') suggest - replace too many inclusion directives
with module-level headers. Basic redirects handling - do not create empty files
for redirected requests (or even files with some useless html).
Task-number: QTBUG-60628
Change-Id: Ia4398d39126313e6213bc7244d11a55958e64dec
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- new screenshot with more up-to-date graphical look
- deleted itemviews-editabletreemodel.png from old folder
doc/src/images
- deleted unnecessary item in qtwidgets.qdocconf
Task-number: QTBUG-60635
Change-Id: I9b82fa027347fb0fd7adb86038abd32853e68c3a
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Unlike client, this needs a bit more changes:
- remove redundant (and outdated) stdlib.h includes
- use QRandomGenerator (instead of qsrand/qrand pair)
- replace QStringList with QVector<QString>
- Q_NULLPTR->nullptr, ExplicitType * -> auto
- fix some weird indentation
Task-number: QTBUG-60628
Change-Id: I12eed12711b1e622407bd8ecd1afdf56a2cf2097
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... as soon as we updated multicastsender. Changes are minimal and mostly
cosmetic - use 'explcit' and 'nullptr' where appropriate, make a socket
data-member and not a pointer, move the 'datagram's declaration outside
of a loop.
Task-number: QTBUG-60628
Change-Id: Icfa46e6d2844c40a605f2f4066847594943a8ea8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use the new configure system consistently.
Task-number: QTBUG-63429
Change-Id: I6668ba9fde09492f3e60e614103e18e88783d0c4
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
... as soon as we updated the 'sender' example. Changes are purely cosmetic
though - 'explicit', nullptrs and local variables instead of redundant
data-members (QPushButton).
Task-number: QTBUG-60628
Change-Id: I572219da9d2a0ced07d94efb6f52f00b5a9c546d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Similar to broadcast sender:
- where possible use local variables instead of data-members
- where possible avoid heap-allocated objects, use sub-objects instead
- change signal-slot connection syntax (and as a "bonus" - show our QOverload)
Task-number: QTBUG-60628
Change-Id: I8cd4f888c1d0653bdc8591800e713bbd347ad2fb
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch contains:
- some cosmetic changes to make example look more like
modern C++;
- UI initialization code and SSL signals handling were split
into separate member-functions;
- useless checks 'if (socket)' were deleted;
- widget's minimum size is now fixed + font size
in 'CertInfo' dialog increased to make it readable.
Change-Id: I7aadb78896832a989494d280d6da0635045f948c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It was already revamped a fair bit 2 years ago
Replaced Q_NULLPTR with nullptr.
Added a minimum size to the progressbar dialog.
Update the label if a redirect is rejected.
Improve the overwrite dialog message.
Replaced the documentation image.
Task-number: QTBUG-60628
Change-Id: I0fb70d90e1d6ca84a8307bd6ea4ea1ce220feeaf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Fix copyrights, update signal-slot connection syntax, use some simple
C++11 features (member-initializers, 'auto'), delete some data-members
(where a local variable is enough), where possible - use data-memebrs
as sub-objects (instead of heap allocated).
Task-number: QTBUG-60628
Change-Id: Ia440d8471eafb47481c0d010175c907037bae841
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Introduce nullptr and override. Change the ready/valid columns to
use check marks. Right-align the numerical columns. Add a shortcut
to refresh. Sort by path, making sure the root volume is first.
Task-number: QTBUG-60635
Change-Id: I74cda7647f544902aaf4d2a0ab76986f1523aa6f
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This makes an enormous difference in responsiveness on the iPad Pro:
it actually feels like real-time drawing with hardly any lag.
Change-Id: I17c3b948e818d4ee46b4d24934c929ab9b386e69
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Changed signals and slots to new syntax, used nullptr and replaced
foreach with new C++11 range based for loops.
Also fixed a few minor flaws.
Task-number: QTBUG-60633
Change-Id: Ice4030133971912f96752d9d84c638c70fd73e35
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Bail out of cleanup() when run 2nd time.
Task-number: QTBUG-60626
Change-Id: I8a9be2fcfb0e8a5584ce8ed7952affff24bd2a33
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Compile examples/opengl only in case opengl support is available.
Task-number: QTBUG-62372
Change-Id: I742a1eb7b7639a5a722c4d5e9b4ee070b629b02e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Add context menu providing:
"Escape Selection" Apply QRegularExpression::escape() to selection
"Paste from Code" Paste from C++
"Copy to Code" (for completeness)
Task-number: QTBUG-60635
Change-Id: Iee15c2243c7d0435b623dde4a1b26249aecd0553
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The square root of a sum of squares is easier to read and should be
computed more accurately if done for us by hypot(). Variables set
only once should be set as an initializer and declared const, to make
clear this is what's happening. Loop variables can be local to loops.
Adding a value to, or subtracting one from, a multiple of itself just
multiplies it be one plus (or minus) the multiplier; assigning the
result to the same variable is clearer as a *= (especially when the
factors are now overt numeric constants). An array of 16k floats all
updated in locksteck to the same value can be replaced by a single
float that holds that value. Simple things should not be needlessly
made more complicated - especially in example code, which should be
pedagogic.
Change-Id: Idab585cd7df1399c250d4b9f1396a085ae8f3864
Reviewed-by: hjk <hjk@qt.io>
Changes internal data-size and pointer calculations
to qssize_t.
Adds new sizeInBytes() accessor to read byte size, and
marks the old one deprecated.
Task-number: QTBUG-50912
Change-Id: Idf0c2010542b0ec1c9abef8afd02d6db07f43e6d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Calling the class-method dotProduct(x, x) in order to then take its
square root is a clumsy way to obfuscate x.length() - and lacks its
efforts (clumsy though they are) to limit rounding issues.
Change-Id: I1dc1f38764651bc70c0620e286cb5625f505ddbf
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Especially in examples, where we should show off our convenience
functions, prefer calling these functions over doing arithmetic with
M_PI (or approximations thereto) and 180 (give or take simple
factors). This incidentally documents what's going on, just by the
name of the function used (and reveals at least one place where
variables were misnamed; the return from atan is in radians, *not*
degrees).
Task-number: QTBUG-58083
Change-Id: I6e5d66721cafab423378f970af525400423e971e
Reviewed-by: Jüri Valdmann <juri.valdmann@qt.io>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Documentation does not match the sample code. There is no explicit
call to QWindow::create(). It is called implicitly by QWindow::show().
Furthermore, QWindow::create() documentation states: "Note that it is
not usually necessary to call this function directly, as it will be
implicitly called by show(), setVisible(), and other functions that
require access to the platform resources.".
Change-Id: I632da86438f7f88c1fd8359b9fd6d52f329291cb
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
All QWindow implementations must produce a frame before
returning from the expose event.
Change-Id: I5640809c47e948101879c1623c12230fa0a63c44
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use M_PI (and friends), where possible, in favor of hand-coded
approximations of various (in)accuracies. Where that's not available
(e.g. fragment shaders), use the same value that qmath.h uses for
M_PI, for consistency. Replaced math.h with qmath.h in places that
defined a fall-back in case math.h omits it (it's not in the C++
standard, although M_PI is in POSIX); or removed this entirely where
it wasn't used.
Reworked some code to reduce the amount of arithmetic needed, in the
process; e.g. pulling common factors out of loops. Revised an
example's doc to not waste time talking about using a six-sig-fig
value for pi (which we no longer do) - it really wasn't relevant, or
anything to be proud of; nor did the doc mention its later use.
Task-number: QTBUG-58083
Change-Id: I5a31e3a2b6a823b97a43209bed61a37b9aa6c05f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It should be easier to translate sizes in bytes to human-readable
strings consistently rather than having to repeat this code (and the
string translations) in various places. The FileDialog in QtQuick.Controls
has a use for this, too.
[ChangeLog][QtCore][QLocale] Added QLocale::formattedDataSize() for
formatting quantities of bytes as kB, MB, GB etc.
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: I27bca146c3eba90fa7a5d52ef6626ce85723e3f0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When an archer lets go of the bow-string, she looses an arrow; when
the hounds are straining at their leashes and the handler lets go, he
looses the dogs. It's archaic usage now; we'd normally say "lets
loose", "lets go" or "releases". In any case what was meant here was
that something got lost; a widget loses focus or a network loses its
connection.
Change-Id: Ic1fbe9e1f76185bcb7caf034d6be97ebfeb2e270
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Martin Smith <martin.smith@qt.io>
There is no visible cursor on iOS, so updating the image is a waste
of time. Removing this does in fact speed up rendering of the strokes.
Change-Id: If958fabeefd4273644707277d4a084855d415bb1
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The function never returns nullptr, so return the matrix by value.
Change-Id: I7c1eeb43b9693866049763565b575348ddd35548
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Apart from being more efficient to construct and test, for the
expected very small number of entries, the example code itself shows
that a sorted vector is much more useful than an unordered set.
Change-Id: Ic5e38df0176ac4be08eac6a89c2e1cabab2a9020
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Found by GCC 7.
Change-Id: I90267617a038558e5b5213c598a949baf8d4d9be
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It was backwards from the expected value, consistently on iOS and xcb.
It was already that way in 5.6, and we don't document which way
is clockwise. So it seems to be just the example which is wrong.
Change-Id: Ibbdadc2ae240017abc87439a2694fb5fbd3d07f8
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Each stroke is a polygon (quadrilateral) connecting the previous
tablet event point to the current one. Previously we used the same
width for both ends of the stroke, so rapid changes in pressure caused
steps in the stroke width. Now it is tapered from one end to the other.
Change-Id: I909a2e85334a1a6e20fd28ee4babf6825da36612
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
They're deprecated since C++11 and removed in C++17.
Change-Id: Ia2acd9312707bfee96838743645a04ae1780e5dd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With disabled gui module qmake in the directory examples/gui and
examples/widgets failes with:
Project ERROR: Could not find feature opengl.
Fix this by protecting 'qtConfig(opengl)' by 'qtHaveModule(gui)' as
already done in examples/examples.pro.
Task-number: QTBUG-60488
Change-Id: Ia842124e818e8c81d41d2b8e3b8905bf1dee58ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QBackingStore should be able to handle a non-created QWindow just fine.
Change-Id: I42299aa0e985422e1fe4279c1385b9979d267a47
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The documentation of QSyntaxHighlighter still uses the deprecated
QRegExp class. This patch updates the code samples as well as cleanup
some typos.
Change-Id: I87b525fddb560b7c5bb38f96d9aaceadb594f76c
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
- when appending to another string
- when just comparing
- when just calling toInt()
Change-Id: I6960784569b83bfd3e3640a8c04f2f909c293449
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
