The change causes a crash when compiling the xkbcommon 3rdparty
library and compile failures (qtimageformats on Android).
This reverts commit a47cb14680.
Task-number: QTBUG-67326
Task-number: QTBUG-67327
Change-Id: I5ddc4eccad699e3eaec535fd6a63d11b0026b42e
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Fixes the default C version used with gcc < 5
Change-Id: I948dece961caed8e6b181e1c6e6b9dc43c46583f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This guarantees that we have proper version checks in place for APIs on
Apple platforms that are not necessarily available on the deployment
target.
Change-Id: I10060f8b910f2bb790aa4a9c6f8c5cdc14d7cf06
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It prints the warning even if we surround the affected code with
QT_WARNING_DISABLE_GCC("-Wstringop-overflow") (see e4eaa62943),
so we have no alternative other than to disable the warning completely.
Change-Id: Ia3e896da908f42939148fffd14c488c4006040e6
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This was originally enabled in the mkspecs for 64-bit QNX 7.0.0
but that broke when the qtConfig change was made. It looks like
qtConfig shouldn't be used in the platform mkspecs. I suspect
the stack-protector changes were left out of the 32-bit mkspecs
so that 6.6.0 builds wouldn't be affected.
Ignore the stack-protector/stack-protector-all possibility since
it isn't possible to access it without a command line option.
Specifying both options doesn't even make sense since
stack-protector-all encompasses stack-protector.
For now, leave out command line control of this feature.
Task-number: QTBUG-59644
Change-Id: I99323216be5b592dd2c3bef6d22da195764a6e65
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The compiler is mostly GCC in disguise, but the libraries are not. Since
the toolchain is not open, it's difficult to fix issues in it.
Task-number: QTBUG-59671
Task-number: QTBUG-59672
Change-Id: Id92f4a61915b49ddaee6fffd14aea2639153f073
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
don't ignore detected features for host tools when we're not actually
cross-building.
Change-Id: Id62a3c1c6b7ae422b14efb4fbea0892b05a047cc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: René J.V. Bertin <rjvbertin@gmail.com>
Disables escalating the implicit fallthough warning to an error, since
Qt is not yet free of unmarked implicit fallthroughs.
With this we can clean the code in the dev branch instead of in 5.6 and
5.8, and only backport bug fixes.
Change-Id: Id30ee21b77de6defcb7d5bb1e05e86c0db098481
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
iOS was excluded in 09aeda21b9, probably
unnecessarily. The build has been found to be warning-free.
Change-Id: I81de2fff40938b6ab9f7a6a5b9f08f8a8baadb16
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
cf53aa21bf and 3aaa5d6b32
were reverted because of reconstruction in 5.7.
defineTest(qtConfTest_checkCompiler) in configure.pri is smart
enough to cover the case in a9474d1260.
DirectWrite: Fix advances being scaled to 0
Since 131eee5cd, the stretch of a font can be 0, meaning
"whatever the font provides". In combination with ec7fee96,
this would cause advances in the DirectWrite engine to be scaled to
0, causing the QRawFont test to fail.
Conflicts:
configure
mkspecs/features/uikit/device_destinations.sh
mkspecs/features/uikit/xcodebuild.mk
src/corelib/global/qglobal.cpp
src/corelib/global/qnamespace.qdoc
src/plugins/platforms/cocoa/qcocoamenuitem.h
src/plugins/platforms/windows/qwindowsservices.cpp
src/plugins/platformthemes/gtk3/qgtk3dialoghelpers.cpp
src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
src/widgets/kernel/qapplication.cpp
tests/auto/widgets/dialogs/qfiledialog/tst_qfiledialog.cpp
tests/auto/widgets/dialogs/qfiledialog2/tst_qfiledialog2.cpp
Change-Id: I4656d8133da7ee9fcc84ad3f1c7950f924432d1e
when it comes to compiler flags (be it warnings or include paths), it
doesn't matter whether we building/using bootstrap libraries, but
whether we are actually cross-building.
amends c55bdc271f and d8be8110a.
Change-Id: Idf988107e9cccc486672c0ee70dc9bdf8eab9d8c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We set CONFIG+=largefile directly from configure, and there is never
a largefile feature in QT_CONFIG.
Change-Id: I3518c749d674529b272685b6ed6c738e48ee5cd7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
the host compiler's version is not determined, so we cannot make any
assumptions about its capabilities.
Task-number: QTBUG-53017
Change-Id: I939fd7402b5daac73f2195b9d8763b9008bc7ea4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
This should help improve the cleanliness of our source code, including
compliance with the C++ standards. They apply to all of our code except
examples (they don't load qt_common.prf).
Change-Id: Ia0aac2f09e9245339951ffff13c94663c1901766
Reviewed-by: David Faure <david.faure@kdab.com>
I've tested with Clang 3.7 and ICC 16 on Linux, XCode 6.4 on OS X for OS
X (not iOS).
Change-Id: Ib306f8f647014b399b87ffff13f1f4291d801a20
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][General Improvements] Qt's buildsystem now detects whether
the compiler supports C++14 and experimental support for C++1z. If the
compiler supports it, then Qt is automatically compiled using that
support.
\
This does not apply to user applications built using qmake: those are
still built with C++11 support only. To enable support for C++14 in your
application, add to your .pro file: CONFIG += c++14 (similarly for
C++1z).
Change-Id: Ib056b47dde3341ef9a52ffff13ef1f5d01c42596
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Prefer -std=gnu++11 unless strict_c++11 is defined. You can enable
strict C++11/C++14 mode by using
CONFIG += strict_c++
That is enabled for Qt's own code, so we we don't accidentally use GNU
extensions in portable code.
There's no support for strict C++98 mode (that is, the -ansi option).
[ChangeLog][qmake] By default, GNU extensions are now enabled with
Clang, GCC and ICC even in C++11 and C++14 modes. To disable the GNU
extensions, add to your .pro file: CONFIG += strict_c++.
Change-Id: Ib056b47dde3341ef9a52ffff13ef14de2169bef5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
pkg-config .pc files use the raw target paths (and pkg-config patches up
-I and -L flags on the fly), so these files were actually already fine.
libtool .la files use the magic prefix = to denote the sysroot.
this works only with libtool 2.4+ (sept 2010).
qmake .prl files have no built-in sysrootification magic, but as they are
read by qmake, it's possible to put property references into them. this
makes them relocatable, both inside and outside sysroots.
Change-Id: I97236ac81e7aba4e4771d14a44cbf59144cc2d3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Glibc will use the intrinsics for 32- and 64-bit, but didn't for 16-bit
(probably because GCC didn't document it until version 4.8), so this
commit will make us access the intrinsics directly the intrisincs for
all type sizes.
Additionally, this will get us access to the compiler intrisics even
without Glibc, such as when building against uclibc or Bionic.
Another benefit is that both Clang and ICC will use the MOVBE
instruction on Atom and Haswell architectures.
Change-Id: I39d1891f479887d719d69ebe4ac92ac9bfeda8af
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Tested with GCC 4.9, Clang from XCode 5.1 and ICC 15 beta.
Clang 3.5 (pre-release) cannot compile qtdeclarative yet with -Werror
due to invalid C++ code there that calls member functions on null
pointers.
Change-Id: Ic2845371a1899716985bc0813dfb820fa418e207
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The linker complains that some symbols were compiled with different visibility
settings when linking host_build tools such as the import scanner. As it turns
out, we do CONFIG += hide_symbols for static libraries (such as bootstrap or
qmldevtools) but naturally not for the final program source code. It appears
symbol visibility is not of importance for static libraries in host builds (as
opposed to static libraries later linked into shared libraries), therefore this
patch removes that.
Change-Id: I237a2d8669374eb059dc91b5378f6e3ec93d67a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
clearly, this was a poor man's implementation of -force-debug-info.
Change-Id: Ib5c7e390bd0e3a6912af8c4027074a114ed33f8a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
