This autotest is blacklisted as it is deemed flaky.
Task-number: QTBUG-63262
Change-Id: I216985e81d1c1cb3528fd8a005be48cad2a31ab7
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When focus is put back onto an itemview and the current item is editable
then the WA_InputMethodEnabled attribute should be set. Likewise this
should be set/unset when the current index changes too, depending on
whether the index is editable or not.
Change-Id: Iaea075e669efd21bdaa89a49c500c449272d098b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
If in a slot connected to QAbstractItemView::clicked
QAbstractItemView::setModel(nullptr) is called the method
QAbstractItemView::mouseReleaseEvent will cause a segmentation fault.
The problem is that the method QAbstractItemView::model used in
QAbstractItemView::mouseReleaseEvent will return a nullptr if a null
model was set. The solution is to used d->model since it is always a
valid model. (See line d->model =
(model ? model : QAbstractItemModelPrivate::staticEmptyModel());
in method QAbstractItemView::setModel)
Change-Id: I6f01bdeac64495ee4a76adcc7bf8da8a7719ef4d
Reviewed-by: David Faure <david.faure@kdab.com>
This is the result of running the (experimental) clang-tidy check
qt-modernize-qsharedpointer-create
Discarded changes:
- tst_qsharedpointer.cpp: not sure we want these replacements there
(→ separate change)
- tst_collations.cpp: hit in a template specialization that is
instantiated with both QSharedPointer and QSharedDataPointer.
Change-Id: I203c2646e91d026735d923473af3d151d19e3820
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Subtract the viewport margins from the contentsRect in
QCommonListViewBase::updateHorizontal/VerticalScrollBar(). This
affects list views in icon mode and list mode / ScrollPerPixel.
Task-number: QTBUG-61383
Change-Id: I6f2f7951ac9344ac21cef1eba061780d130e2467
Reviewed-by: David Faure <david.faure@kdab.com>
qtreewidget.h:179:53: warning: 'search' may be used uninitialized in this function [-Wmaybe-uninitialized] ^~
tst_qtreewidget.cpp:1564:22: note: 'search' was declared here
QTreeWidgetItem *search;
tst_qtreewidget.cpp: In member function 'void tst_QTreeWidget::expandAndCallapse()':
tst_qtreewidget.cpp:2678:18: warning: 'p' may be used uninitialized in this function [-Wmaybe-uninitialized]
Change-Id: I19c9dc86aa12f36c26ae2475f1854ed17fad0638
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This is a followup to 77a8e90cdd which
didn't handle the case where no columns had been moved.
visualIndices and logicalIndices are empty until initializeIndexMapping()
is called, in which case appending is wrong.
As a result, visualIndex(i) would return -1 for the values over
those added by read(), and an assert would happen at painting time.
The fix is to leave visualIndices and logicalIndices empty if
they are empty already, leaving it to initializeIndexMapping()
to fill them later if necessary (e.g. when moving a column).
Task-number: QTBUG-60837
Change-Id: Ia7e4b9d3122647984acd434dfaa0400df319d065
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
QTBUG-43818 does not affect only Android, it can be reproduced also
with qemu.
Change-Id: I6364c09b3c7f860b34899e26056ad562b7c338f2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Made change to clear the hover index when the mouse leaves the widget.
This will ensure the component does not think the item still has the
mouse over it.
Task-number: QTBUG-46785
Change-Id: I34b7f0e171e9cf07ca23150af1b0e6e59a10a58a
Reviewed-by: David Faure <david.faure@kdab.com>
The setData method of an item view would get an incorrect value of a
QDialog's result. This patch changes the order of functions called to
fix that.
[ChangeLog][QtWidgets][QDialog] Fixed a bug where accessing the result
of QDialog's result could yield an incorrect value in some situation
like using it as a delegate for item views.
Task-number: QTBUG-6018
Task-number: QTBUG-12156
Task-number: QTBUG-14430
Change-Id: I6ee4b6e8cacf6a806631c05c6c5dbcff925df65e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The char* returned from QTest::toString() calls must be manually
delete[]ed.
Change-Id: Iad078e8741e3e97693b1a417693f414b3fb3ec09
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Taken QTreeWidgetItems need to be deleted, as do items
created without a parent, and widgets without parent.
Change-Id: I7ffa69903af9a1b92ba308f9f9416aec1d6d975f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The size of flowPositions is larger by one than the number
of rows in the model so the last correct row number is
flowPositions.count()-2, not flowPositions.count()-1.
Change-Id: Idf8bbd155151d553947d5d299dd01ffaff0c95fa
Task-number: QTBUG-47694
Reviewed-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: David Faure <david.faure@kdab.com>
When saving state for a 3-columns headerview and then restoring that
state onto a 5-column headerview, the headerview shouldn't suddenly think
it has 3 columns.
Rather than making restoreState() fail, we adjust for the additional
columns, so that we can still apply the customizations from the user to
all other columns (hiding, moving, etc.).
Change-Id: I3f220aa322ea8b629d2fe345f8cde13e0ea615d6
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
.. instead of manually casted 0s.
QCOMPARE(., nullptr) was added for Qt 5.8. Make use of the new API.
In tst_qwidget.cpp, as a drive-by, change
qApp->focusWidget() -> QApplication::focusWidget()
Change-Id: I1331b8916b026d48e01534d1ed0b3d72f3f3d50c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
GCC warned:
tst_qtablewidget.cpp:30:
tst_qtablewidget.cpp: In member function ‘void tst_QTableWidget::mimeData()’:
qtestcase.h:66:52: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
if (!QTest::qVerify(static_cast<bool>(statement), #statement, "", __FILE__, __LINE__))\
^
tst_qtablewidget.cpp:1523:5: note: in expansion of macro ‘QVERIFY’
QVERIFY(data = table.mimeData(tableWidgetItemList));
^~~~~~~
Fix by adding the extra parentheses, as usual.
Change-Id: I2826d7a865b4113b468d5a958ede06e03aa0e278
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Before commit f1e9076809, mousePressEvent
called the virtual method setSelection(const QRect&, SelectionFlags)
with the 1x1 rectangle which contains only the clicked QPoint, unless
the SelectionFlag "Current" was set because Shift was pressed during
the mouse press.
Since that commit, the behavior has been changed such that the
rectangle is the one that is spanned by the center of the clicked item
and the clicked pixel. In theory, the result should be the same (i.e.,
only the clicked item should be selected), but
* the code path in QListView::setSelection for 1x1 QRects is more
efficient, and
* using a larger QRect can cause problems with custom views, see the
comments in QTBUG-18009
This commit ensures that the 1x1 QRect is used again, unless the
SelectionFlag "Current" is used.
Change-Id: I70dd70c083c20a3af6cd6095aa89a489756b505f
Task-number: QTBUG-18009
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Otherwise we can fail to stretch the last section when adding new
sections.
Task-number: QTBUG-52446
Change-Id: I7eb5267ac500bf4246e57c3e3a43268bb65ef1f7
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
As reported by UBSan:
tst_qtreeview.cpp:2187:36: runtime error: downcast of address 0x7ffc15749f20 which does not point to an object of type 'PublicView'
0x7ffc15749f20: note: object is of type 'QTreeView'
Fix by making the test a friend of QTreeView (and, for
Clang, of QAbstractItemView) instead.
Change-Id: I5b748696ab441a91058f4d45a18bd5ed75a6e560
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As reported by UBSan:
tst_qabstractitemview.cpp:336:23: runtime error: member call on address 0x7ffe6fe96e10 which does not point to an object of type 'TestView'
0x7ffe6fe96e10: note: object is of type 'QListView'
tst_qabstractitemview.cpp:337:5: runtime error: member call on address 0x7ffe6fe96e10 which does not point to an object of type 'TestView'
0x7ffe6fe96e10: note: object is of type 'QListView'
tst_qabstractitemview.cpp:338:23: runtime error: member call on address 0x7ffe6fe96e10 which does not point to an object of type 'TestView'
0x7ffe6fe96e10: note: object is of type 'QListView'
[etc ...]
Fix by making the test a friend of QAbstractItemView instead.
Change-Id: I1a08977042296eb34e9dbdb5c0595662dbd2e5ef
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As reported by UBSan:
tst_qtreeview.cpp:663:5: runtime error: load of value 4294967295, which is not a valid value for type 'DragDropMode'
Instead of abusing -1 to indicate to not set the dragDropMode,
use a separate boolean field in tha data.
Change-Id: I13e7539c858f3b2462d57d660062ef3cb7aec61b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Extract the common part from QItemDelegate and QStyledItemDelegate
which uses QLocale to convert a value for Qt::DisplayRole to a string.
Use this code to get the text for tooltips and "What's this?".
[ChangeLog][QtWidgets][QAbstractItemDelegate] Show localized detailed
tooltips and "What's this?" texts.
Task-number: QTBUG-16469
Change-Id: I8618763d45b8cfddafc2f263d658ba256be60a15
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The test was half-ported from Qt 4 and #ifdefed out depending
on WINVER. When it became active, it failed since it queries the window
handle too early in the process.
Move the code sending the message into showEvent() to ensure a window
handle exists and parent the listview properly to prevent a leaking
toplevel.
Change-Id: I74aa9ddfd0e88dd31e9258400fc3e473b6e0d92e
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The old code sometimes made incorrect selections when rows or columns were
hidden or moved. It used logical top left and bottom right indexes to create a
selection rectangle. However on moved or hidden cells a wrong rectangle was
made. This fix calculates a simple rectangle without hidden cells and makes use
of the row/column select functionality provided by the selection model, to make
the right selection.
[ChangeLog][QtWidgets][QTableView] Fixed a selection bug when rows or columns were hidden (QTBUG-50171)
Task-number: QTBUG-50171
Change-Id: Id186012af26da7b2051ff5eb1c13e6b7494cca77
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
The old code incorrectly calculated visual region for a selection (specified by
QItemSelection object) in case of reordered / swapped rows or columns. It used
the leftmost and rightmost (upmost and downmost for vertical mode) logical
indexes directly. However some middle logical index (in case of reorder) may be
the leftmost or rightmost visual index. In such cases the repainting didn't
work properly. This fix first checks whether reordering / swapping is in use.
If it isn't (ie visual=logical) we use code similar to the old code. Otherwise
the new code scans all selected logical indexes, translates them into visual
ones and gets the correct leftmost and rightmost indexes.
[ChangeLog][QtWidgets][QHeaderView] Fixed a repainting issue when items had been reordered.
Task-number: QTBUG-50171
Change-Id: If6afabebf445cf32a8e0afe262b6ee149e7c4b2b
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
