Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
For consistency with append and prepend we should have an overload for
insert() as well. This also enables insert() to be used with
QStringBuilder, i.e. qba.insert(2, qba2 + "abc").
Because simply adding a const QByteArray & overload causes ambiguity
with QByteArrayView we also add a const char * overload.
Add some extra test-cases. Two for QByteArrayView since it's not
directly tested anymore. One for inserting self directly.
Change-Id: Ieb43a6a7d1afbb498bc89c690908d7f0faa94687
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Append was previously optimized for lhs being empty but it should've
also taken into account if space had been reserved.
Apply the same optimization to prepend while we're at it.
Change-Id: I5e5d33a3189b9ad88d45e858a2ac412cbc294f79
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Remove QTypeInfo::isStatic, as that's not used anymore in Qt 6.
Also remove sizeOf, it's unused, and we have QMetaType for that if
required.
Remove all typeinfo declaractions for trivial types, as the default
template covers them correctly nowadays.
Finally set up a better default for isPointer, and do some smaller
cleanups all over the place.
Change-Id: I6758ed37dfc701feaaf0ff105cc95e32da9f9c33
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Created tst_QByteArrayApiSymmetry test for the common APIs of
QByteArray and QByteArrayView. Moved the tests for startsWith(),
endsWith(), indexOf(), lastIndexOf(), compare(), from tst_QByteArray
to tst_QByteArrayApiSymmetry and adapted them to check different
QByteArray/QByteArrayView combinations. Added tests for first(),
last(), sliced(), chopped(), chop(), truncate(), count(), contains()
(test inputs are taken from corresponding tst_QStringApiSymmetry
tests).
Task-number: QTBUG-84321
Change-Id: I4e712b1692e3c1271d51ddcda6c9eb8bb01e11d4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Also adjust qCalculateBlockSize() to be able to handle large
allocations.
QVector::length() is currently still limited to 2G items, that will
get changed in a later commit.
Change-Id: I3a92fbfd7f281d30844c5fafa3b9a474bc347c19
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the last places where those got used and avoid
allocations when we resize to 0.
Change-Id: Ib553f4e7ce7cc24c31da15a55a86d18bdf1cc5c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a side effect, data() can now return a nullptr. This
has the potential to cause crashes in existig code. To work
around this, return an empty string from QString::data()
and QByteArray::data() for now.
For Qt 6 (and once all our internal issues are fixed), data()
will by default return a nullptr for a null QString, but we'll
offer a #define to enable backwards compatible behavior.
Change-Id: I4f66d97ff1dce3eb99a239f1eab9106fa9b1741a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Previously only qstr*icmp() were tested and the test data was sent via
QString and {en,de}coding. Use a local data-type to package pointers
to actual string literals for passing to these functions that take
them. Fold the various tests involving null pointers and empty
strings into the general testing, removing from "singularity" tests,
and combine the remainders of those tests into a single test of
singular cases for QByteArray::ompare. Move all these tests to
alongside the existing tests for QByteArray::compare. Use nullptr
rather than 0 as the null string.
Change-Id: Ie6d01e839c330c2f960af4bcc95e5633539337d6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Previously it handled Latin-1, which made it incompatible with UTF-8,
which is now our preferred 8-bit encoding. For Qt6 it is limited to
ASCII. Adjusted tests to match. QLatin1String::compare() turned out
to be relying on qstrnicmp()'s Latin-1 handling.
Removed some spurious Q_UNLIKELY()s and tidied up code a little in the
process.
[ChangeLog][QtCore][Important Behavior Changes] Encoding-dependent
features of QByteArrray are now limited to ASCII, where previously
they worked for the whole of Latin-1. This affects case-insensitive
comparison, notably including qstricmp() and qstrnicmp(), and
case-transforming functions.
Fixes: QTBUG-84323
Change-Id: I2925d9908f8654599195a2860847b17083911b41
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
resize() to a smaller size does not reallocate in Qt 5 if the container
is not shared. Match this here.
As a drive-by also fix resize calls on raw data strings to ensure
they are null terminated after the resize.
Change-Id: Ic4d8830e86ed3f247020d7ece3217cebd344ae96
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It has been the case for both QStringLiteral and QByteArrayLiteral
since Qt 5.0, and Q_ARRAY_LITERAL since Qt 6.0.
Since it's definitely surprising, add a note in the docs, which
is "somehow" consistent with the interpretation of capacity as
the biggest possible size before we reallocate. Since it's 0,
any manipulation of the size will cause a reallocation.
(Alternatively: the capacity() is for how many elements memory was
requested from the free store. No memory was allocated, so 0...)
Task-number: QTBUG-84069
Change-Id: I5c7d21a22d1bd8b8d9b71143e33d537ca0224acd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The goal here is to move things over to QArrayDataPointer. This prepares
for it.
Change-Id: I32f54a47594274799600c618f7341c200ceaa306
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We already detach immediately since change
c2d2757bcc. That basically removes
the main purpose of having QChar/ByteRef, and we can just as well
get rid of those classes for Qt 6.
Change-Id: I8dc566a1948ddc29c0cb8a77ec7310654a7219a4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The next change will stop using some values in the reference counter as
settings from the data.
Change-Id: I94df1fe643896373fac2f000fff55bc7708fc807
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The Mutable flag now contains the information on whether the data this
QArrayData points to is mutable. This decouples the mutability /
immutability setting from the allocation and from the type of data,
opening the way for mutable raw or foreign data.
There are still plenty of places in the source code that check the
size of the allocation when it actually wants d->isMutable(). Fixing
this will require reviewing all the code, so is left for later.
The needsDetach() function is moved to QArrayData and
de-constified. It returns true when a reallocation is necessary if the
data is to be modified.
Change-Id: I17e2bc5a3f6ef1f3eba8a205acd9852b95524f57
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The test passed mostly by accident so far, as the created QByteArray
was shorter than what the test assumed.
Change-Id: I06858801d83a504eadc73ec2be281c88f8ffad5d
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QByteArray::fromBase64 was liberal in its input, simply skipping
over invalid characters. As a side-effect of this, it had
no error reporting, meaning it could not be used to convert
fromBase64 _and_ validate the input in one go.
Add more option flags to make fromBase64 strictly validate
its input. Since we want to know whether it has succeeded
or not, and the existing fromBase64 overloads do not
allow for that, introduce a new function that returns
an optional-like datatype.
While at it: base64 decoding can be done in-place; add an
rvalue overload to enable this use case.
[ChangeLog][QtCore][QByteArray] Added the new fromBase64Encoding
function.
[ChangeLog][QtCore][QByteArray] Added new flags to make
fromBase64 / fromBase64Encoding strictly validate their input,
instead of skipping over invalid characters.
Change-Id: I99cd5f2230f3d62970b28b4cb102913301da6ccd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>