We want to enable gaining access to the underlying resource(s) by
inspecting a QRhiRenderTarget. This is not currently possible for
swapchains since there is nothing that references the actual
QRhiSwapChain. To clean this up, make an explicit, new
QRhiSwapChainRenderTarget subclass. Thus the logic already used in a
couple of places to examine the resources attached to a
QRhiTextureRenderTarget can now work with swapchain render targets too,
by branching based on the resourceType().
This eliminates the somewhat odd setup where a "RenderTarget" resource
is QRhiRenderTarget corresponding (but not exposing!) a swapchain,
whereas a "TextureRenderTarget" is a QRhiTextureRenderTarget which
is a subclass of QRhiRenderTarget. Now we correctly have an (abstract)
base and two subclasses, one for each type of render targets.
Besides, it allows us to clean up the oddly named
Q...ReferenceRenderTarget classes in the backends, which initially tried
to indicate that this "render target" merely references (or, in
practice, is) a swapchain. We can now have a nice and symmetrical
Q...SwapChainRenderTarget and Q...TextureRenderTarget naming scheme.
Change-Id: Ib07e9be99a316eec67b94de0860e08f5f4638959
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QNX tests are run under QEMU so have the same problem as Ubuntu.
Pick-to: 6.2 6.3
Task-number: QTBUG-100928
Change-Id: Id7c7639b743062c777502e2ba8b28f9bb18deb19
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Two things are done here:
- use showNormal() instead of show() to get an expected widget size.
- skip the test if HighDPI scaling is enabled with non-integer scaling
factor, because there can be rounding errors.
Fixes: QTBUG-87390
Pick-to: 6.3 6.2
Change-Id: I653a17bac2142838b03a328e1629582384b6c7b3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The test will never pass on Android because it's missing permissions
to read root filesystem.
Skip the test instead of blacklisting it.
Fixes: QTBUG-87427
Pick-to: 6.3 6.2
Change-Id: Ib57a49b1d2bc4204f8aa2c3028c7220d23ff2a91
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Only (straightforwardly) implementable with modern APIs, and
only really exists to handle special platform cases, such as
when a video framework gives us a D3D texture array with
D3D11_BIND_DECODER | D3D11_BIND_SHADER_RESOURCE
which is only possible to use as a shader resource if the SRV
selects a single array layer.
Has no effect on the normal usage of texture arrays, where all
array layers are exposed, and it is the shader that selects the
layer when sampling or loading via the sampler2DArray. That
continues to be the standard way to work with texture arrays.
Change-Id: I0a656b605da21f50239b38abb83067e0208c1dbe
Reviewed-by: Piotr Srebrny <piotr.srebrny@qt.io>
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
This test doesn't fail on Android anymore, so don't use QEXPECT_FAIL.
Pick-to: 6.2 6.3
Task-number: QTBUG-100470
Fixes: QTBUG-69242
Change-Id: I5a96566728a486c701656aede1818e7ab7f019be
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Don't use deprecated methods in tests, and don't refer to them in
documentation.
Change-Id: I110480742d9a7b9b0a2e194e3fe610208c1e07da
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Parent window in sizeLessWindow test was using software pipeline at
least on webOS, causing a QCRITICAL() exit when the test was executed.
Fixes: QTBUG-101869
Pick-to: 6.3
Change-Id: Ie8cc0ea0b6a09729475389be44197e01a45b217f
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
On Wayland, there is no protocol to do it yet.
Task-number: QTBUG-100792
Task-number: QTBUG-101145
Change-Id: Id72625a8161359111a2d0f43f3215e787778ba6b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
[ChangeLog][QtGui][QColor] The constructors from string-ish type, as
well as the setNamedColor() and isValidColor() functions, have been
deprecated effective Qt 6.6 in favor of fromString() and
isValidColorName(), resp.
Fixes: QTBUG-101389
Change-Id: I002646bd48c1e4340dc6842fd136fc9f35bb9b61
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
for QInputDevice::primaryKeyboard() and
QPointingDevice::primaryPointingDevice().
This also reverts ae9fefe3c8.
Fixes: QTBUG-100790
Pick-to: 6.3
Change-Id: Id02f277db25f823eb29e939e25801325df8e4076
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
And remove their uses.
[ChangeLog][QtCore][Deprecation Notice] Deprecated QString::count()
and QByteArray::count() that take no parameters, to avoid confusion
with the algorithm overloads of the same name. They can be replaced
by size() or length() methods.
Change-Id: I6541e3235ab58cf750d89568d66d3b1d9bbd4a04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is customary for Qt types that can be constructed from string-ish
to provide a fromString() named constructor. QColor didn't, relying
instead on a set of overloaded implicit and explicit constructors.
Add the named constructor, with the intent to deprecate the string-ish
QColor constructors after a grace period.
To prevent new users from using known-to-become-deprecated API, mark
the old functions as \obsolete.
Also rename isValidColor() to isValidColorName(). The only reason why
these are lumped together in single commit is so that their docs can
refer to each other instead of having to temporarily refer to obsolete
API.
[ChangeLog][QtGui][QColor] Added fromString() and isValidColorName(),
both taking QAnyStringView.
Task-number: QTBUG-101389
Change-Id: I2857c728257ad2f14c7c968b45547bdf07c44b63
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
on Wayland
Task-number: QTBUG-100917
Pick-to: 6.3 6.2
Change-Id: I66c42bb0ceca83fd0531159c606d22c58b18b371
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In QPainter, clipping can only be done on whole pixels. The various
ways of specifying a clipping rectangle to the QPainter API have been
inconsistent in how fractional rectangles (either specified directly,
or as a result of fractional scaling) are mapped (rounded) to integer
coordinates.
Also, the mappings have not made sure to keep the edge-to-edge
property of clip rects under scaling. This is particularly important
when scaling QRegions with multiple rects, as QRegion is designed on
the assumption that an area can be described as a set of edge-to-edge
rects.
The fix rounds a clip rect identically with a fill rect. (Indeed, a
followup plan would be to merge QRasterPaintEngine's
toNormalizedFillRect() with the rectangle rounding function in this
commit).
Notably, a QRectF clip is now interpreted the same as a QPainterPath
clip describing the same area.
This modifies d9cc149995
Task-number: QTBUG-100329
Fixes: QTBUG-95957
Task-number: QTBUG-100343
Pick-to: 6.3
Change-Id: Iaae6464b9b17f8bf3adc69007f6ef8d623bf2c80
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QNX tests are run under QEMU so have the same problem as b2qt
Pick-to: 6.2 6.3
Task-number: QTBUG-100948
Change-Id: I2abc8a4bca9e8ba414197721301d493296e7ce0b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The stored layout direction used to get changed during initialization
to what was auto-detected based on the translation. Changing the
translation then overwrote that stored value, even if an explicit call
to setLayoutDirection was made by the application.
Calling QGuiApplication::setLayoutDirection(Auto) has so far been a
no-op.
Change this logic so that the stored layout direction continues to be
LayoutDirectionAuto also if it's set based on auto-detection, and only
overwrite it when explicitly called with a non-Auto value. This way,
applications can set a layout direction that stays unchanged even when
translators are installed.
Add test coverage that uses a QTranslator.
In practice, this is not a change of behavior, unless applications called
setLayoutDirection(Auto) (which is no longer a no-op), or called
setLayoutDirection() and then installed a translator and expected the
translator's layout direction to come into effect in spite of the explicit
setting.
[ChangeLog][Gui][QGuiApplication] Calling setLayoutDirection with a non-
auto value now disables the auto-detection based on installed
translators. Applications that explicitly set a layout direction and also
want translators installed afterwards to take effect should reset the
layout direction to Auto, which is now no longer a no-op.
Fixes: QTBUG-100632
Pick-to: 6.3
Change-Id: I1fdcebd43a9b1b468ff95bf15f53f441bb214e08
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The test is not only flaky on Windows 10 but also on Windows 11.
Pick-to: 6.2 6.3
Task-number: QTBUG-100412
Change-Id: I27e8179dafd4743c3eaf2c0dd8b70b804612c7c2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
tst_qtextdocument was disabled because it crashed.
It does not any more.
Task-number: QTBUG-87671
Pick-to: 6.2 6.3
Change-Id: Ie1bd75c21e481c2ecb8607c04ce9370fc6d7b00e
Reviewed-by: Samuel Mira <samuel.mira@qt.io>
Reviewed-by: Pekka Gehör <pekka.gehor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The hugeQImage test loads, as its name suggests, a huge image.
At 2.5 GiB it's too big for the hard-coded 1 GiB limit on RAM
that the QNX toolchain hard-codes when it's started in QEMU.
Pick-to: 6.2 6.3
Task-number: QTBUG-100929
Change-Id: I8e8caaff7fd1dd0e648ada5df613c793f72bcf5d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
In tst_qguiapplication and tst_qcoreapplication,
the application version should be set. On Android, this
is done using QT_ANDROID_VERSION_CODE.
Pick-to: 6.2 6.3
Change-Id: I6b473ad25092fb24df9400e0ab8fbb8ea4edbb6a
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
on Wayland
Task-number: QTBUG-100891
Pick-to: 6.3 6.2
Change-Id: Iadf12364ded4549988ad75a9487c7e96e963a956
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
[ChangeLog][QtGui][QDesktopServices] URL handlers that have been passed
to setUrlHandler() must now be removed by calling unsetUrlHandler()
before they are destroyed. Relying on the handler's destructor to
implicitly unset it is now deprecated, because it may already be in use
by concurrent openUrl() calls. Support for implicit unsetting will be
removed in 6.6 and, until then, a qWarning() is raised if it is
exercised.
Fixes: QTBUG-100775
Fixes: QTBUG-100779
Pick-to: 6.3 6.2 5.15
Change-Id: I0c4f91b78f847b135fdeb38766babc892bdc1379
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
tst_qcoreapplication.cpp is used both in tst_qcoreapplication and
tst_qguiapplication. To distinguish these two compilations,
the define QT_GUI_LIB was used. This led to an error on Android,
where Qt::Gui is always linked, because the Qt Android Platform
Plugin needs it.
This patch introduces the preprocessor define QT_QGUIAPPLICATIONTEST
which is to be used only in the compilation of tst_qguiapplication.
This is then used instead of QT_GUI_LIB.
Change-Id: Ifa5bfacb197d68365288c1da85573106515fc6c2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Remove Integrity and Android specific code that explicitly adds
test data to the resource files. qt_internal_add_test functions
implicitly adds test data to resources for Android and Integrity
platforms by default.
Change-Id: Ia1d58755b47442e1953462e38606f70fec262368
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Multiple tests use qt_internal_add_resource that copies the
functionality that is already implemented inside the
qt_internal_add_test function. Simplify these test by replacing
the qt_internal_add_resource call with the new BUILTIN_TESTDATA
option.
Change-Id: I18475b817d6f87264f0de53817d6c26c5ccab4e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Raster pipeline is not supported on webOS OSE: trying to use it causes
an exit(1).
Fixes: QTBUG-100654
Pick-to: 6.3
Change-Id: I00325fc1330a2d0d4abfdee054343ecfac767309
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
There is a TODO for this in Qt Quick from the 6.0 times. To decide
upfront if Metal can be expected to function, or if a fallback to
OpenGL needs to be triggered (especially important with macOS virtual
machines, where, unlike any real macOS system, Metal may not be
present at all), the scenegraph calls create() and then drops the
result. The idea to make this less wasteful was back then to add a
dedicated probing function which can, possibly, perform the checks in
a more lightweight manner than full initialization. Implement this
now, focusing on Metal.
Brought to attention by QTBUG-100441: printing warnings about not
having an MTLDevice is confusing in a Metal-less macOS VM, because it
is not an actual error, only part of the probing at scenegraph
initialization. We can now avoid printing confusing warnings there.
Change-Id: Ie52c36af9224bedc3f5e4c23edb486d961c9f216
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
On X11 we already had to wait as window managers might scroll windows
in. On macOS we also waited - albeit a bit shorter - also because
screens scroll in slowly.
We didn't wait on Windows, and on Windows the test is quite flaky.
Attempting to make it run stably by waiting for long enough so that all
paint events are flushed to the screen.
As a drive-by, break some overly long lines.
Task-number: QTBUG-100412
Pick-to: 6.3
Change-Id: I49b1e447aced2fe1af3c5d30b514f8df3cc1813c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In 63eea5e5c69434871eaef9d9dc7184d7e54d7276, the
Qt::ItemNeverHasChildren flag was introduced. QFileSystemModel
was modified to use this flag for items which are not directories,
but only if the QFileSystemModel is not read-only and
the directory is writable.
This patch modifies QFileSystemModel to use the ItemNeverHasChildren
flags also if the model is read-only and if the item
is read-only.
Amends 63eea5e5c69434871eaef9d9dc7184d7e54d7276
Change-Id: Ie7f7d58ecf7baade93f9f03d120da84d3c005d42
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Some calling code did this beforehand, other didn't. Now, the function
itself checks for an existing handler before doing anything else.
Change-Id: I8fc43fb8788c9dfe825b15ffa2fa69ee43915cd6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The test also fails on Windows 11
Pick-to: 6.2 6.3
Task-number: QTBUG-98475
Change-Id: Iab079587d743500d222f2272d1145424e079b4a3
Reviewed-by: Heikki Halmet <heikki.halmet@qt.io>
The test has been XPASS'ing recently on Android.
Reverts 67e209f59f.
Fixes: QTBUG-69216
Change-Id: Ic629cc28936e0ef27277c243717e97226bf01b1c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
If id == 0, then we should grab the specified rect from the screen.
To do that, find all windows intersecting with the screen geometry, and
compose their backing store images into a screen-size pixmap.
Otherwise, find the respective backing store and grab only that.
Remove the old code respecting the desktop widget, which is no longer a
thing in Qt 6. The code was also wrongly grabbing only the first
containing - not intersecting - window's backing store into the screen
pixmap.
Enable the QScreen::grabImage test for the offscreen platform, where it
now passes.
Task-number: QTBUG-99962
Change-Id: I16eca7b082d65095a62c73624f86a4423e997a7a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This is an issue for QQuickWindow in practice, although it is not hit
by our current tests.
Pick-to: 6.3
Change-Id: Ia73704c1af6a82b2689ce7b844d3b0eb9a17ec18
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
This is heavily inspired by the patch written by Inho Lee
<inho.lee@qt.io>, which says "There is a precision problem in the
previous algorithm when checking pitch value. (In the case that the
rotation on the X-axis makes Gimbal lock.)"
In order to work around the precision problem, this patch does:
1. switch to the algorithm described in the inline comment to make
the story simple.
2. forcibly normalize the {x, y, z, w} components to eliminate
fractional errors.
3. set threshold to avoid hidden division by cos(pitch) =~ 0.
From my testing which compares dot product of the original quaternion
and the one recreated from Euler angles, calculation within float range
seems okay. (abs(normalize(q_orig) * normalize(q_roundtrip)) >= 0.99999)
Many thanks to Inho Lee for the original patch and discussion about
rounding errors.
Fixes: QTBUG-72103
Pick-to: 6.3 6.2 5.15
Change-Id: I8995e4affe603111ff2303a0dfcbdb0b1ae03f10
Reviewed-by: Yuya Nishihara <yuya@tcha.org>
Reviewed-by: Inho Lee <inho.lee@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
