In static builds, due to our CMake design for auto-linking plugins
being incorrect we sometimes cause link failures on Linux in leaf
modules, because the link line order is incorrect.
So far such failures were fixed by explicitly modifying the order of
libraries on the link line in each failing CMake project.
This proves to be problematic because the failures appear in seemingly
random integrations that don't even touch the build system parts.
Until we fix the design, another less performant but more
general / safe way is to increase the link interface multiplicity,
which causes a cycle of libraries to be repeated more than 2 times
on the link line, thus giving the ld linker more chances to figure out
which symbols are needed for linking.
Implement this for Linux static builds to avoid random integration
failures for people that know nothing about this issue.
The link multiplicity for all qt modules is increased to 3, thus
QtGui would be repeated 3 times on the link line of each dependent
library. The value is also configurable via the
QT_LINK_CYCLE_MULTIPLICITY cache variable.
Task-number: QTBUG-83498
Change-Id: I2fd2bb2b5e7fec4e3ef5d1194668b524d20f7067
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It used to be called HAVE_DASH_UNDEFINED_ERROR, but that always
cause Coin to print the compile check as the first build error snippet
because it contains the word "error", and whenever you get emails from
Gerrit the first snippet is always this compile check.
Rename it to avoid confusion in emails and Coin status reports.
Change-Id: I5487623abf9df177b100d2b45635688504f0e25a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For static builds of Qt we installed the plugins into the lib
directory. However, they are expected in the plugins directory tree.
This happens, because we pass a value of an uninitialized variable to
ARCHIVE DESTINATION in the qt_install call in qt_internal_add_plugin,
and CMake defaults to "lib".
This flaw was introduced in b42feb02ce with the following intent:
"This patch also changes add_qt_plugin() to use the value provided in
INSTALL_DIRECTORY for ARCHIVE_INSTALL_DIRECTORY if no value is provided
for the latter."
The patch changed the value of arg_ARCHIVE_INSTALL_DIRECTORY but
missed to set the variable archive_install_directory, which is
actually used in the qt_install call.
We now directly set archive_install_directory and remove the unused
archive_install_directory_default variable.
Task-number: QTBUG-84781
Change-Id: Ifd0475d8452272e8765bf42fd912a45cfa3dbbd1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Because find_package usually creates targets in a local scope,
qt_generate_prl_file fails to generate a .prl file that has
references to generator expressions like
"$<TARGET_FILE:Freetype::Freetype>" which references targets
that are not found in that specific scope (e.g Freetype target is
present in qtbase scope, but not qtsvg scope).
This happens in static top-level Qt builds, and thus fails the
configuration. While we try to figure out how to fix this adequatly,
don't generate .prl files in such a configuration.
Task-number: QTBUG-84874
Change-Id: I69cf0ad1419d21e3676e1374624601f00936c405
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qmake_use.prf understands the _DEBUG and _RELEASE suffixes for
QMAKE_LIBS_XXX entries. The CMake configuration "Debug" is considered
for the _DEBUG entries, "Release" and "RelWithDebInfo" for _RELEASE.
The qt_lib_XXX_private.pri files are now generated in multiple steps:
1. The QT_LIBS_XXX information is generated per $<CONFIG> and written to
.cmake files.
2. A preliminary qt_lib_XXX_private.pri file is generated, containing
only configuration-independent data.
3. A custom command runs the QtGenerateLibPri.cmake script that combines
the files from step 1 and 2 into the final qt_lib_XXX_private.pri
file.
The same is done for mkspecs/qmodule.pri.
To be able to trigger custom commands from header modules, which are
interface libraries, we introduce one XXX_timestamp ALL target per
header module that creates a timestamp file. To that XXX_timestamp
target we add the pri file generation target as dependency.
Fixes: QTBUG-84348
Change-Id: I610f279e37feeb7eceb9ef20b3ddfecff8cfbf81
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The module pri files of internal modules did not expose any include
paths. They must have both, the public and the private include paths.
Task-number: QTBUG-84781
Change-Id: I3cbe94d4e49c754e49d26b00012e668b0afbdc8f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
MinGW plugins should not have the lib prefix in the shared library
names. Do this manually for a couple of libraries, and also for the
generic qt_add_cmake_library function.
Amends 9b0e23ef8a
Change-Id: I1cfaf8fc046f86edd3e755adfa599aa0aa854ee3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Include headers in .pri files should point to the framework Headers
dirs.
The module name in the .pri file is not versioned when it's a bundle.
Paths to system frameworks in .prl files should instead be replaced
with -framework Foo flags.
Change-Id: Ia353d033799fae40a1bc55fad6f86b2c8ef76c56
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Qml tests currently don't expose a CMake target, so no
dependency should be added to a non-existent target.
Make sure to add the check target only if the test was previously
added.
Fixes configurtion failure of qtdeclarative tests.
Amends 873aa682c5
Change-Id: Ic8bbfe668c00c1ce05f1e1dfe5494dafd91dd7b8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This patch allows tools to be built for the target platform when the
QT_BUILD_TOOLS_WHEN_CROSSCOMPILING parameter is set at configuration
time.
To avoid naming conflicts, the target tools are suffixed with "_native".
The qt_get_tool_target_name() function can be used to get the tool name
for both scenarios (cross and non-cross compilation).
Extend pro2cmake to refer to the right target name for tools.
The relevant write_XXX functions have a new target_ref parameter that
will be "${target_name}" for tools and literally the target name for
everything else.
Fixes: QTBUG-81901
Change-Id: If4efbc1fae07a4a3a044dd09c9c06be6d517825e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Given a test named "tst_qdrag", you can run "ninja tst_qdrag_check"
to build and run the test.
Change-Id: I47dccb39dd60fca9cb07ff9af9fb739b293c5aaf
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This avoids issues with some special characters and spaces.
Change-Id: I6b7cedbe2c9663f62fae104488454faebab52ce0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake sets "lib" as default prefix for Windows-GNU platforms.
Change-Id: I49e3123c385610307c84c584a21f5f3827a6fafd
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The function name has been changed upstream (3.18).
Change-Id: I76a26cdc8de71dffa5402a7c7423006a7a01552e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's only calls were with the PUBLIC argument, so remove the argument
both in the declaration and call sites, and just return the public
dependencies.
Fix up the names of the variables as well.
Amends b56dc55c3a
Change-Id: I830c1894376d0d3a2eb2bd4ffa38a1b3b3066292
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Previously we checked the LINK_LIBRARIES property of the main module
target, but we should instead use the values of
INTERFACE_LINK_LIBRARIES set on the FooPrivate module.
Because both versionless targets and private targets are interface
libraries, we need to properly differentiate between them when
following versionless targets to their main associated target.
To do that, instead of using string comparison, export an additional
private _qt_is_versionless_target property, and query that.
Also make sure to set and export the _qt_config_module_name property
on the FooPrivate targets.
Also make sure to APPEND to EXPORT_PROPERTIES rather than override
(looking at you QtFeature.cmake).
Task-number: QTBUG-75666
Change-Id: Ia3261e218840e9f5217ab49755e8c876560e294d
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Qt module targets now export the "_qt_config_module_name" property,
which contains the module's name in qmake land. This can be different
from the lower case target name (e.g. Test vs testlib). This exported
property is used when retrieving the dependencies of a module outside
of qtbase.
The property's name is a bit odd and lower case, because we want to be
able to set it on INTERFACE_LIBRARY targets, for instance header
modules. This CMake pecularity is described in
https://gitlab.kitware.com/cmake/cmake/issues/19261
Fixes: QTBUG-84287
Change-Id: I4a75af3ebeabebc56a0f77d464e45ab7fd81eafa
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit e875f45805.
Reason for revert: syncqt creates a master header that includes
the *Depends header. Therefore we must always create the *Depends
header. Ignore for now that *Depends headers are empty and pointless
for module headers.
Change-Id: I1dcc836788b3d46c4f1b504d2d64e9eb67b66206
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For now, we have to turn off the 3rdparty lib generation code for
qt_lib_XXX.pri files, because it's broken for NMC if the 3rdparty
libraries have different binaries per config.
The actual fix is more involved.
Task-number: QTBUG-84348
Change-Id: I863e69085b68c0dbbb3f6c415111bc255799e155
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce a qt_finalize_module function that is called as a
CMakeLists.txt finalizer and call qt_generate_module_pri from there.
This is done in preparation for writing the QT.XXX.depends entries to
the module pri files, because we must do this after all dependencies
have been added.
Change-Id: Ia61db73383541651389fd647523ef535792874d4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If an OUTPUT_DIRECTORY option is provided, it should be used instead
of discarding it.
Change-Id: Ie53b56616f16589f7c05ff9378d7ba2e2ba34726
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The module pri files are supposed to add their public features to the
global QT_CONFIG variable.
Change-Id: I9a1719f897747a1d89011b1f1231c05a23539def
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Avoid writing module_plugin_types-NOTFOUND into the module .pri files.
Change-Id: I2fed7b0d1c21e2233eebcaca419f522a07d22af4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For modules that are not yet ported to CMake and that use
QMAKE_USE += libfoo
we need to provide the information about libfoo in the qt_lib_XXX.pri
files.
Also, we now generate qt_ext_XXX.pri files for bundled 3rdparty libs.
Task-number: QTBUG-75666
Change-Id: I9e4b057a197554ecb37c294c0bf09e2a2b3aa053
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When using Ninja Multi-Config, we don't want to install a "Release"
moc.exe, and then override it with a "Debug" moc.exe.
Because it doesn't seem possible to exclude installation of targets
per configuration, put the non-main configuration tools into
configuration specific subfolders like "bin/Debug", so no overriding
happens upon installation.
Introduce a new function qt_get_install_target_default_args() which
returns install destination arguments for consumption in qt_install()
calls. The function adds the config-specific suffix to the destination
for the appropriate configs.
Each call to qt_install *adds* new rules for installation,
which means that export registration needs to happen only on the first
call.
Make sure qt_add_tool doesn't ask qt_add_executable to install
yet again, to create duplicate rules.
Apply the same install arguments logic to qt_add_executable calls.
Task-number: QTBUG-80900
Task-number: QTBUG-80901
Change-Id: I3e732d27dba5bf5f8059d2878ef1e425237d383a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Set the target property INTERFACE_MODULE_IS_HEADER_ONLY for
header-only modules, and only create *Depends header files if this
property is falsy.
Change-Id: Ic6b100787d18b3ff1f7b9d0f2b5c744018b1f295
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This value is the equivalent of qt_module.prf's MODULE_INCNAME and can
be used to specify a name for the module's include subdirectory. The
default is Qt<ModuleName>.
The include name is stored in the module's target property
MODULE_INCLUDE_NAME.
Change-Id: Ie6c8f6882ee2c3db78884ae5781593c803be3c05
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And enable the same default when building Qt itself (it's implicit).
Allow opting out on a target-by-target basis, by using the public
qt_disable_utf8_sources() API call.
Change-Id: Ifc19a744d57b96b1c74a6926a0c6628c2a820464
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Before, we were setting those properties only for Qt modules.
Now, Qt executables and plugins have a full VERSIONINFORMATION
resource on Windows.
Also, extend the CMake API with the possibility to pass target
information to modules, plugins and tools. This will be used in a
subsequent commit.
Change-Id: I2bb8d3637569e0eaec76f56331bc23282285d872
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Aka handle CMAKE_INSTALL_PREFIX in a more relocatable way.
The following story inspired this change.
If a user wants to build a Qt repo into a different install prefix
than the usual Qt one, this will fail configuration because we
look for various things like syncqt, qdoc, etc relative to
CMAKE_INSTALL_PREFIX, which will now point to a different location
where none of the above tools are located.
The intent for such a use case is to support building Qt packages with
Conan, which sets a random install prefix when configuring a repo.
The idea is to derive the qt prefix dynamically from the
QtBuildInternals package location. Essentially it's a reverse relative
path from the QtBuildInternalsConfig.cmake file to the install prefix
that was specified when initially configuring qtbase.
Once the dynamic prefix is computed (so we know where the possibly
relocated Qt is), we can find tools like syncqt and qdoc.
This is an initial attempt to support a use case like that.
More design work will probably needed in case if tools / libs need to
be found in a location different than the Qt install prefix (so
support for multiple install prefixes / search paths).
An example of such a case would be when building qtdeclarative and
qtquickcontrols2 as Conan packages in one go. Most likely the
qmltyperegistrar tool will be located in the random install prefix
set by Conan, so building qtquickcontrols2 might fail due to not
finding the tool in the original Qt install prefix.
As to the implementation details, the change does the following:
- Dynamically computes and sets the
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX variable when
find_package()'ing QtBuildInternals. It's an absolute path
pointing to where the relocated Qt is.
- When building qtbase this variable is not yet available (due
to QtBuildInternalsExtra not existing), in that case we set
the variable to the absolute path of CMAKE_INSTALL_PREFIX
(but only for the initial qtbase configuration).
- Remove QT_BUILD_INTERNALS_ORIGINAL_INSTALL_PREFIX which was used
for standalone tests purposes. It's not needed now that we compute
the location of the Qt prefix dynamically.
- The Unixy qt-cmake and qt-cmake-private shell scripts now
use a relative path to find the toolchain file we created.
- The toolchain file also dynamically computes the location of the Qt
packages, and adds them to CMAKE_PREFIX_PATH.
- A lot of existing CMAKE_INSTALL_PREFIX uses are replaced with
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX. This includes finding
tool locations, mkspecs dir, path environment setup for tools, etc.
- Some places still use CMAKE_PREFIX_PATH in the following cases
- When determining paths while configuring qtbase (valid cases)
- When I wasn't sure what the behavior should be, so I left them
as-is (an example is documentation generation, do we want to
install it into the random Conan prefix, or into the main prefix?
Currently it installs in the random prefix).
Note that relocating a Qt installation does not work for non-prefix /
non-installed builds, due to hardcoded paths to include directories
and libraries in generated FooTargets.cmake files.
Task-number: QTBUG-83999
Change-Id: I87d6558729db93121b1715771034b03ce3295923
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is needed for building Qt plugins with qmake against other
CMake-built modules.
Change-Id: Ibd6ad0b08645c798be74285b24f71add947bea88
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Due to the install prefix being changed for standalone tests,
the correct $qt_prefix/bin folder was not added to the PATH
environment variable when running tests.
Make sure to always include the the original qt install prefix,
even if a different install prefix is specified when configuring
standalone tests.
Amends 39090ea15c
Change-Id: I22aab732bb2bb679074a811d28d8209e1d535df3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... and update handling of CLASS_NAME in qt_internal_add_plugin
Change-Id: Iec8e5f9f80df02c9ba21648535872988839f4b64
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It broke configuration of qtwayland standalone tests, due to qtwayland
doing 3 separate qt_find_package(Wayland) calls with the same package
but different arguments in 3 different directory scopes.
The top scope didn't have PROVIDED_TARGETS argument. The rest of the
scopes did have the arguments with either Server or Client, but because
of the debug behavior above being enabled by default the dependencies
weren't registered in the Qt6WaylandClientDependencies.cmake file (and
the server equivalent).
The registration didn't happen due to the skipping logic, when a package
is found and the targets already exist.
This led to standalone tests failing to configure because they tried
linking against non-existent Wayland::Client and Wayland::Server
targets.
This reverts commit dd7e40b108.
Change-Id: I60e358a4891b84ecec0e127d9de8ab9747a6ab24
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
Add a SKIP_AUTOMOC argument to qt_add_3rdparty_library and use it in
BundledHarfbuzz.
Change-Id: Ie4aa61639a5ab64f286ac539989572a9ae6bc3d5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Without this behavior enabled by default it is currently not possible to
build QtVirtualKeyboard as a static build. We run into the error where
cmake is trying to promote the targets to be global due the XCB library
already being found by one of the modules in QtBase.
In case we wish to disable this fix, any module can simply specify
QT_FIND_PACKAGE_DISABLE_DEBUG_BEHAVIOR=ON during configuration time.
Change-Id: Id7f2ad12ddea941dda754361660c7606439cd5a4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This feature is Windows-only and must be turned on manually.
For MSVC it sets the MSVC_RUNTIME_LIBRARY target property.
For MinGW it adds the -static linker flag.
Change-Id: I9da3b88d545b34bc34a3a80301b2dd1b5986fa88
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch adds a publicly callable qt6_add_plugin() API to create
plugins. This API is meant to cover cases such as the plugandpaint
example.
This patch also renames qt_add_plugin to qt_internal_add_plugin in order
to avoid clashes with the public API. To avoid breaking the existing
projects, a compatibility wrapper function is enabled by default unless
QT_DISABLE_QT_ADD_PLUGIN_COMPATIBILITY is specified.
Fixes: QTBUG-82961
Change-Id: If5b564a8406c90434f1bdad0b8df76d3e6626b5f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Consider a negated feature config value like the following:
qt_feature_config("foo" QMAKE_PUBLIC_QT_CONFIG NEGATE)
If this feature was disabled, it would turn up in both,
enabled_features and disabled_features of module .pri files.
Also, QT_CONFIG would contain foo.
Expected however is that QT_CONFIG contains no-foo, and only
disabled_features contains foo.
Fix this by prepending a "no_" prefix to the value, similar to the
"no-" prefix in the qmake build. The qt_correct_config function was
adjusted to recognize "no_foo" and translate it to the qmakeish
"no-foo" config value.
Config values that start with "no_" but do not correspond to a feature
are left untouched. You can still have values like
"no_valley_too_deep" or "no_mountain_too_high".
Change-Id: I23d8b18c84e04ea6dfa25cc6ccd8f7e86211b144
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In a non-prefix build, the module .pri files must end up in the
mkspecs/modules subdirectory of qtbase's build directory.
Change-Id: I241f4e274d31de7c1e3c2fa8e5e26fb8747f11c5
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Implemented some necessary functionality to generate correct .pri
information, so that qmake can build modules.
Task-number: QTBUG-75666
Change-Id: I63281adfef3d01385928b1d8c4be0b32ac97c4d7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This commit also adds a qt_finalize_module function that is called for
every Qt module after all link dependencies have been added.
Change-Id: I489d188d05e368208a8a62828bb12fb395df54bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The install prefix in such a case is the qtbase build dir,
and not the qt6 top-level build dir. This caused issues with
certain incorrect paths being generated, including a broken
qt-cmake-standalone-test script, as well as upon reconfiguration
determining that a non-prefix build should be installed.
The fix for a non-prefix build is to check explicitly for
the qtbase build dir. This works both for super and non-super
builds.
Task-number: QTBUG-83496
Change-Id: Ida2393176c4c81da767023ff48159afdedfb0a19
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Instead of using CMAKE_INSTALL_RPATH to embed an absolute path
to prefix/libdir into all targets, use the more sophisticated aproach
that qmake does.
For certain targets (modules, plugins, tools) use relative rpaths.
Otherwise embed absolute paths (examples, regular binaries).
Installed tests currently have no rpaths.
On certain platforms rpaths are not used (Windows, Android,
iOS / uikit).
Frameworks, app bundles and shallow bundles should also be handled
correctly.
Additional rpaths can be provided via QT_EXTRA_RPATHS variable
(similar to the -R option that configure takes).
Automatic embedding can be disabled either via QT_FEATURE_rpath=OFF
or QT_DISABLE_RPATH=ON.
Note that installed examples are not relocatable at the moment (due
to always having an absolute path rpath), so this is a missing feature
compared to qmake. This is due to missing information on where
examples will be installed, so a relative rpath can not be computed.
By default a Qt installation is relocatable, so there is no need to
pass -DQT_EXTRA_RPATHS=. like Coin used to do with qmake e.g. -R .
Relative rpaths will have the appropriate 'relative base' prefixed
to them (e.g $ORIGIN on linux and @loader_path on darwin platforms).
There is currently no support for other platforms that might have a
different 'relative base' than the ones mentioned above.
Any extra rpaths are saved to BuildInternalsExtra which are re-used
when building other repositories.
configurejson2cmake modified to include correct conditions for the
rpath feature.
It's very likely that we will need a new qt_add_internal_app()
function for gui apps that are to be installed to prefix/bin.
For example for Assistant from qttools. Currently such apps
use qt_add_executable().
The distinction is necessary to make sure that relative rpaths are
embedded into apps, but not executables (which tests are part of).
Amends e835a6853b
Task-number: QTBUG-83497
Change-Id: I3510f63c0a59489741116cc8ec3ef6a0a7704f25
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The CMAKE_INSTALL_RPATH cache var had the PATH type, which made
CMake transform the value into an absolute path, getting rid of the
$ORIGIN value.
Fix that by changing the cache var type to STRING.
Also clean up the all-caps commands, add a usage example and print
the install RPATH.
Change-Id: Ibf40cfde4283369ddfcf52609143799cc8e47d68
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is required to support QtVirtualKeyboard's third party OpenWnn
library.
Change-Id: I64b6a2b6b6b0259bea5aa249a8c901def31f916c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The previous approach didn't work for prefix builds. While a target
might be excluded from building via EXCLUDE_FROM_ALL property, when
calling make install it would still try to install the target and
thus fail.
It's not possible to modify an install() command in a post-processing
step, so we switch the semantics around.
pro2cmake will now write a
qt_exclude_tool_directories_from_default_target() call before adding
subdirectories. This will set an internal variable with a list
of the given subdirectories, which is checked by qt_add_executable.
If the current source dir matches one of the given subdirectories,
the EXCLUDE_FROM_ALL property is set both for the target and the
qt_install() command.
This should fix the failing Android prefix builds of qttools.
Amends 622894f96e
Change-Id: Ia19323a2ef72a3fb9cb752ad2d4f2742269d11c4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
configurejson2cmake handles the 'static' and 'shared' features now.
There's no need to special-case it anymore.
Change-Id: I956e9f46ebe022b1da862e986ec05f41e1e804e0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
configurejson2cmake handles the 'rpath' feature now. There's no need
to special-case it anymore.
Change-Id: I9aa9c9acdeb586de09d8a8d269909f8acb02e40a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Starting with CMake 3.18, there is PCH support for darwin multi-arch
builds, like iOS simulator_and_device builds.
Also enable PCH for Objective-C++ files when the support is there.
To enable PCH for Objective-C++, we need to do enable the OBJCXX
language as well, but conditionally, because on non-darwin platforms
the language is probably not available.
Introduce the qt_enable_cmake_languages() macro which is called
automatically by qt_build_repo_begin().
Change-Id: I0e7f44be6577ac54ce940470036626409920e272
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The target may not be defined which causes error:
get_target_property() called with non-existent target "qtwaylandscanner".
Change-Id: I58a9122456ccbbbb8fc9f0adce3b7ddcc985e6a4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Installing headers is not supported for 3rd party libs (we don't run
syncqt, we don't install headers for 3rd party libs to
prefix/include).
Remove the unnecessary condition.
Change-Id: I46e9af7a7ca9de0138666b0d0faffc86238672ba
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When creating the include/QtShaderTools/QtShaderToolsDepends file
in QtPostProcess.cmake -> qt_internal_write_depends_file(),
we decide which include files to append based on link dependencies
starting with Qt::, which happens to match 3rd party targets like
Qt::BundledSpirv_Cross which doesn't expose headers in the
prefix/include dir.
Mark all bundled targets with the QT_MODULE_SKIP_DEPENDS_INCLUDE
property to exclude them from being added to Depends files.
This should fix static builds of qtquick3d which includes
<QtShaderTools/QtShaderToolsDepend> which tries to include a
non-existent <QtBundledSpirv_Cross/QtBundledSpirv_Cross>.
Change-Id: I9dcff1e2ab721a7c21fcff3fda0faf8d023d60ba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The path where we install plugins is usually
prefix/plugins/plugin_type/plugin_name
The plugin_type should not be escaped, so it should be used verbatim
(no escaping of slashes or dashes)..
So far it seems the only weird plugin types are wayland plugins which
contain dashes, like wayland-shell-integration, and the sub-ios plugin
which has a slash (platforms/darwin).
For cmake properties we use the escaped names.
This should fix tests in wayland where the wayland plugins can't be
found.
Change-Id: I93406731b8c872a82c0f247f5b7c6bdab4875455
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Qt uses the qtNomakeTools() function to mark a directory which will
not be built as part of the default target. This is especially
important when cross-compiling (to iOS for example) because the build
process might fail.
The condition for not building these "GUI tool sub-directory projects"
is the absence of the "tools" value in qmake's QT_BUILD_PARTS
variable.
Introduce a QT_NO_MAKE_TOOLS CMake variable. If the value is true,
it's equivalent to "tools" not being present in QT_BUILD_PARTS.
Introduce qt_exclude_tool_directories_from_default_target().
It's the qmake counter part to qtNomakeTools().
Teach pro2cmake to generate it where appropriate.
Change-Id: If2e5958d91847ab139af0e452608510286e73fa0
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Such a case can happen when cross-compiling. Tools currently are not
built when cross-compiling, so if the desktop tool was not built,
accessing properties on that target would fail when trying to set up
the documentation building.
Change-Id: I2ffcbb9623df3e4daacdf4be3f48c4b2dd13851b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The function qt_generate_module_pri_file did not take into account the
CONFIG_MODULE_NAME argument of qt_add_module.
This resulted in wrong file names and content, e.g. qt_lib_test.pri
instead of qt_lib_testlib.pri.
Fixes: QTBUG-83176
Change-Id: Id6991396cf9ea5a1d155aa15402c0d84a8a9d082
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
For INSTALL_*DIR variables that have the the same value as
CMAKE_INSTALL_PREFIX, a second cmake run cleared the value. This is
because file(RELATIVE_PATH) returns the empty string if we pass the same
absolute paths.
Fix this by checking the return value of file(RELATIVE_PATH) for the
empty string and setting it to ".".
It's a limitation of qmake that empty strings are not handled as ".".
Change-Id: I8fc4d1eabcc9d5634be2f3741b0002a347dd17e6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt_add_module checks for the existence of the following directory
include/QtFoo/6.0.0/Foo when deciding whether a private module target
should contain that path in its INTERFACE_INCLUDE_DIRECTORIES.
There are 2 cases when it's created, when running syncqt, and inside
qt_install_injections. If syncqt doesn't create it because there are no
private headers (like in qttools/src/global), qt_install_injections
created it at generation time (for injected configure headers like
qttools-config_p.h)
Unfortunately that caused the existence check mentioned above to fail,
not exporting the path in the QtToolsPrivate's include directories,
and failing the qttools build.
To fix that, create the injection files (and directories) at configure
time, using qt_configure_file instead of file(GENERATE).
Change-Id: Idd9b6ec36e986c4de95d11557170e1c70927211c
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It has the same kind of signature as file(GENERATE) but
creates the files at configure time rather than generation time.
CMake provides a few ways to generate files
file(WRITE) -> always overrides content
configure_file() -> only overrides if content changes, creates file
at configure time, can only take a file as input
file(GENERATE) -> only overrides if content changes, creats file
at generation time, can take a string or file
as input
Because dealing with an input file is a hassle (need to create one,
make sure it's installed, make sure it's used correctly in the
various build types like super-build, non-prefix-build, etc)
people tend to use file(GENERATE) instead, which can take a string
argument, and is thus easier to use.
Unfortunately that introduces subtle bugs because the
file is created at generation time, but there are existence
checks which are done at configuration time.
Thus qt_configure_file allows creation of files at configure time,
without having to provide an input file. Underneath it uses
configure_file(). Once CMake 3.18 is released, the implementation
can be switched to use file(CONFIGURE).
Change-Id: Ic8f8d88541ef0b25d01af143352c8c9ba390ad5f
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Previously you could use either module-specific or
repo-specific 'docs' targets.
For example 'ninja html_docs_qtbase' or 'ninja html_docs_Core'.
Now there's a global / top-level target called
'docs', so 'ninja docs' works.
For super builds it will build the documentation of all
configured repositories.
For a single repo build, it's equivalent to calling
'ninja docs_repo_name'.
Also for consistency, add the "docs_Core" target, which was missing
before. So now a 'docs' target exsits for repo names AND targets.
New global target names are
- docs
- prepare_docs
- generate_docs
- html_docs
- qch_docs
- install_html_docs_docs
- install_qch_docs_docs
- install_docs_docs
Amends 0095ff4e06
Change-Id: I686be1e0962e40cbce860e8ac2cabb056b360ac2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Simplify the handling of simd specific sources. The previous
implementation was causing simd instructions to bleed into the main
library.
The tests were failing because the avx instruction were leaking into
Qt6Gui due to the previous problem. This in turn caused any test which
required Qt6Gui code run to crash since it is not possible to run avx
instruction in the VMs.
This patch also disables PCH for the simd sources as they result in
warnings related related to using PCH header not compiled for the
architecture in question. The latter can cause the build to fail in
conjunction with warnings as errors.
Change-Id: I1be98f2f5e967f33793d6a2e6134a24ef1709566
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
The exported INTERFACE_LINK_LIBRARIES property now looks a lot more
sane.
Change-Id: I093fcb242607023dd0b103298562b299cb803028
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Aka the version of C++ that needs to be supported when compiling
applications that use Qt headers (C++17 at the moment).
Change-Id: I64dec297e8329f31b1d9864f216a95782049ed06
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The only two uses (QtHarfbuzz and QtDoubleConversion) have been removed,
so now the code is not needed anymore.
Change-Id: Id9ef628fa139f1431395bcdd1705463dfafb1051
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We recomputed INSTALL_LIBDIR for every new repo that is configured,
which is incorrect due losing any custom provided libdir when
configuring qtbase.
Save that information (and all other path components) in
QtBuildInternalsConfigExtra.cmake.
Make sure not to-recompute that information when configuring a project
other than QtBase.
Allow providing absolute paths instead of relative paths for these
variables.
Note that only absolute paths pointing somewhere under
the prefix will currently work, otherwise configuraion will fail. If
we need to support such a use case, we'll have to carefully check all
code that use these path components to make sure they handle absolute
paths correctly (current assumption is relative paths everywhere).
Use the computed paths when generating the qconfig.cpp file which is
used for qmake -query.
Task-number: QTBUG-81289
Change-Id: I331aa00e47988fe0ee4e533b5f95c4df11c4d96f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For this, we have to uninline the separate_debug_info configure test,
because supporting the conversion of this in configurejson2cmake is not
worth the hassle.
Separate debug information can be turned on for a target by calling the
function qt_enable_separate_debug_info. For Qt's shared libraries and
tools separate debug information is generated if the
'separate_debug_info' feature is manually turned on.
Change-Id: Ic2ffc15efef3794dc0aa42f3d853ef6d651a751c
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When a Qt module has this property set, when we generate the
QtModuleDepends header file and find this module it will not be added.
This is required to be able to create a Core_qobject module, as it does
not have any headers.
Change-Id: Iaea1080919d05ace12e48693e02d8c0f4c669339
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously the FindWrap modules checked for hardcoded features
when deciding whether to use a bundled library or not. This proved
not to work correctly because features were not available when
the find modules were processed.
Introduce a new CMake API call that needs to be manually called
after an add_subdirectory call which declares a bundled library.
The call will check for the existence of the bundled target, and will
then set a cache variable QT_USE_BUNDLED_Bundled<TargetName>.
The same variable is written into a FindWrapFooConfigExtra.cmake file
which will be loaded by the appropriate FindWrap module. The module
can that use that variable to decided whether to link against the
bundled library or the system library.
Change-Id: I75e9a4f4e14d88d4490916a79ad12f1ce57891e0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add support to generate win32 resources files through CMake. The
functionality is implemented via qt6_generate_win32_rc_file() in
Qt6CoreMacros.cmake.
Currently qt_add_test(), qt_add_module() and add_qt_gui_executable()
call the above function when building on windows. The function itself
has been written as part of the public API so it can be called from
other locations if required.
Change-Id: Id5388b3bf9a2068b36780d8268306326f990778c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As reduce-relocations implies bsymbolic_functions, we also add the
-Bsymbolic-functions linker flag.
Also, handle the .dynlist files that are passed to the linker by
bsymbolic_functions.prf in the qmake build.
Change-Id: I535c33fba888596d2f8975b16864bbe9f0a7caa4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Only existing directory paths should be added to
INTERFACE_INCLUDE_DIRECTORIES, otherwise projects fail to configure.
If after running syncqt there is no private headers directory created
(due to the module not having any _p.h files), such a path should not
be added as an interface include path.
This fixes consumers of QtZlib, where there are no private headers.
Change-Id: I3fd1a7b5eb8f816d178d6d91223baa6f377e6f9f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Libraries created with qt_add_3rdparty_library should be installed
when the qmake 'installed' value is set in CONFIG. Introduce a new
INSTALL option to handle that in CMake projects.
If the value is provided, the library should always be installed
regardless of whether it's a shared or static library.
Fix the libraries to be installed to BINDIR/LIBDIR instead of
the config install dir.
Also install the CMake config files into the config install dir.
Change-Id: I86f1ef47680f08669a77db77e0d986f47d5fae2d
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Useful for header only modules that are declared in the same directory
as a regular module, but which doesn't have any features and thus has
no qtfoo-config.h file.
Will be used for the qtzlib module, which is built when system_zlib
feature is disabled.
Change-Id: I60c5f73c3e2a3a481a16c5872e06d5d109a04b10
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The QT_COMPILE_OPTIONS_WARNINGS_OFF property can be set on targets
in order to disable adding the default compiler warnings flags.
This is useful when building 3rd party library code.
Change-Id: I9f58ca4543b5ea0d2051b7f94f0042d24c4e3a16
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Prior to this patch QT_NO_DEBUG would not be correctly set for
generators which support multiple configurations such as Visual Studio
and XCode.
This patch also applies the define to all executables, which was
previously missing.
Change-Id: I16a911d15217a62093c68ba2b4c2545cdb8df1e6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch fixes setting the correct value for the PATH
environment value. Currently, due to Windows' ; path
separator, every list entry was treated as a separate
environment variable that need to be set instead of
properly extending the PATH list.
Change-Id: Ib2fc031397459370beec84f9cb4ec6df7db00df3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If we install tests data for non-prefix builds it can cause tests to
fail as they find the data in the wrong location. An example of this is
tst_qsslkey.
Change-Id: I55bd2ff4cb5a0857dc857cb2149ffe4436ec6f99
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If qt_add_test() is called with OUTPUT_DIRECTORY and no
WORKING_DIRECTORY is specified, default the WORKING_DIRECTORY to the
same value as OUTPUT_DIRECTORY._
Change-Id: If373fe590508ad58d4632e0598cd0d9dddb2ae16
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Need to pass additional -Zc:__cplusplus flag when using
MSVC, so that the __cplusplus define has correct values.
Additionally make the option be propagated to consumers of Qt
via the public Platform target, which QtCore links against.
Change-Id: Ie1283c25334b93f993529beb7fb32bdb001627f5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Hardcoding 'doc' causes issues when installing qtbase but also
when trying to build the other modules documentation.
Change-Id: I5c57852add59d0dc0d067813feea0bbb0962c84b
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add qt_add_3rdparty_library() function as a replacement for qmake's
qt_helper_lib feature.
All 3rdparty libraries will be available under the Qt:: alias when built
through this method so that they can properly register as dependencies
of a Qt module.
This patch also adds Qt3rdPartyLibraryConfig.cmake.in to export the
CMake configuration for static builds and shared libraries.
Change-Id: I52bf3a95ca22fccd9ab54343468847bb1b570c28
Fixes: QTBUG-81969
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Unless we are building under a static library configuration there is no
reason to export the dependency on private libraries.
Change-Id: I724da38495dc55cc2783d4b19c01533fc0900d22
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Every metatypes.json files is now added as an INTERFACE source file to a
target. This enables us later to correctly collect all the
metatypes.json files from dependent targets. This information is also
correctly exported via export()/install().
To avoid the metatypes.json appearing in every target's source list,
the file path is wrapped in a generator expression which will only be
evaluated when the consuming target has the property
QT_CONSUMES_METATYPES set to true. At the moment this is limited to
targets which need to interact with qmltyperegistrar.
Change-Id: I0ffebcd069a923383f7ed11cde2c94ecf2fb13f3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If a module has the NO_MODULE_HEADERS option, we should not add
the private module header paths to the BUILD_INTERFACE of private
modules.
This fixes building static non-prefix qtdeclarative builds on Linux,
where non-existent QtXcbQpa headers failed the qtdeclarative
generation step.
Change-Id: Ic9fdd8c5688d3449576eb8a5dd852c252e29bf5b
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This bit is being move to QtDeclarative as it is not required to build
QtBase.
Change-Id: I7b559b8b0e33e66d92c97c93bc43b650e7150237
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch enables each module to load their own
Qt${version}ModuleBuildInternals.cmake to expose module specific
features when building Qt.
These scripts are only loaded when the package QtBuildInternals has been
loaded.
Change-Id: Ie58dd93ddd292cf106fe7ef147151a51fd5aa2b1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Always set the installation directory for Qml modules as it is required
for qt6_add_qml_module() to set the correct properties so that qml files
can be copied to the right location.
This patch also fixes the copy of qmldir. As it previously stood, the
copied file was not complete as it is possible fore the contents to
change after we exit this function.
Change-Id: I974269cf0507664b005a93bf27ab19941d99f1d6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt6_generate_meta_types_json_file() has been extended to allow the
generated moc_....cpp.json files to be manually specified. This now
enabled the metatype generation to be used without resorting to AUTOMOC.
Additionally, Core_qobject declaration order has been temporarily moved
as it otherwise does not produce the correct metatypes dependency file
for Core. This will be fixed in a follow up patch.
Change-Id: I3266ab3073db478458a0c1dbc8b9fbab16622a64
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If a module project (Quick) contains QT += core-private, the
qmake semantics translated to CMake would mean the following:
target_link_libraries(Quick PUBLIC Core)
target_link_libraries(Quick PRIVATE CorePrivate)
target_link_libraries(QuickPrivate INTERFACE CorePrivate)
Whereas a QT_PRIVATE += core-private only means
target_link_libraries(Quick PRIVATE CorePrivate)
without adding any public dependencies to QuickPrivate.
To achieve that, we need a few modifications to both pro2cmake and
QtBuild.cmake
- pro2cmake doesn't automagically add public and private dependencies
to targets when encountering a private module assigned to QT.
Instead it generates the logic described above by passing correct
LIBRARIES, PUBLIC_LIBRARIES, and PRIVATE_MODULE_INTERFACE values.
- pro2cmake doesn't do any dependency magic for non-module targets
anymore, like executables, plugins, internal_modules. This means
that QT assignments are now regular public dependencies.
- qt_add_module and qt_extend_target now accept a new
PRIVATE_MODULE_INTERFACE option.
- qt_extend_target does not automagically make private modules be
public dependencies on other private modules.
- qt_extend_target correctly assigns PRIVATE_MODULE_INTERFACE values
to Private module only. For other target types, it's a no-op.
The change requires regeneration of all projects.
When we fix pro2cmake and QtBuild.cmake to properly handle
internal_modules (create only Private modules without creating
a non-Private counter part), we will need another project regeneration
to correctly assign dependencies.
Change-Id: I4c21f26b3ef3b2a4ed208b58bccb65a5b7312f81
Task-number: QTBUG-81780
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use syncqt.pl from QT_HOST_PATH if that is given, since qtbase
sources might not be available and CMAKE_INSTALL_PREFIX doesn't
check for sysroot.
Change-Id: I165b17a5a02fd4dbb2340bf69a641b8aaab8fabd
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If we don't add the executable used by the custom_target and/or
custom_command to list of the command's/target's dependencies
(DEPENDS) the generated file will not update should the executable
change.
Change-Id: Idce30f3dd4f756d9e8f6848c5e16f5dd6c7c8f0a
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Hardcoding "lib" caused build issues and wrong
INTERFACE_INCLUDE_DIRECTORIES paths in generated CMake configuration
files if INSTALL_INCLUDEDIR pointed to a different location.
Contributes to QTBUG-81289
Change-Id: I3276ecbb4bf5df1c0b4c496c0287b4a69586d683
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
INSTALL_LIBDIR may point to a different directory than "lib".
Contributes to QTBUG-81289
Change-Id: Ia8220515e3ee3703539aa28655e6c806736615ec
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
INSTALL_BINDIR may point to a different location than "bin". In order
to avoid errors when trying to install qtbase, "bin" is replaced with
"INSTALL_BINDIR" where necessary.
Contributes to QTBUG-81289
Change-Id: I1d4f9fb2617547c9b0e44d6690caebb2b6768e2f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Linux distributions may want to install mkspecs files into a
different subdir in order to make Qt6 co-installable with
older versions.
Contributes to QTBUG-81289
Change-Id: Ie4a64370d742948d5ca4f2eaed6ea550d2676707
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Christophe Giboudeaux <christophe@krop.fr>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Due to generator expression it is impossible to recursively evaluate the
link dependencies of a target. This is required by QtDeclarative's
qmltyperegistrar.
To overcome this we generate a ${target}_metatypes_dep.txt file which
contain lines with the following pattern:
${PATH_TO_METATYPES.json}=${PATH_TO_METATYPES_DEP.txt}
This can be used to recursively evaluate the dependencies at run time.
Change-Id: Ia4cee0632c16ba9631e0289db906fe9d320844a3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
If the OUTPUT_NAME of a plugin is the same as the CMake target name,
don't try to create a custom target with the same name. That will
cause configuration errors due to duplicate targets.
Amends f67d8ae2d4
Change-Id: Iaea7c68e22dbc1e345ba10950c312618abba4c21
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In Qt 5, qmake generates CMake Config files which expose the plugins
as imported libraries. The name of these libraries are derived from
the plugin class name. So QCocoaIntegrationPlugin, and not qcocoa.
To keep compatibility between Qt5 and Qt6 CMake target names,
the pro2cmake script should generate plugin target names based on the
plugin class names.
To avoid passing the same name in qt_add_plugin (target and CLASS_NAME),
derive the class name from the target if the class name is
not explicitly specified.
Also add a new OUTPUT_NAME parameter which is used to change the
final file name of the plugin, so that it's compatible with Qt5.
For example to generate a qcocoa.dylib file, instead of
QCocoaIntegrationPlugin.dylib file.
The same OUTPUT_NAME value will be used for generation of plugin .prl
files for qmake consumption.
Change-Id: I4d53e680d7beb62befecd359cdf6bba60a34ff0d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This allows doing debug_and_release builds with Ninja on all
platforms.
The "Ninja Multi-Config generator" is available starting with CMake
3.17.
Desired configurations can be set via CMAKE_CONFIGURATION_TYPES.
Possible values: "Release, Debug, RelWithDebInfo, MinRelSize".
For example -DCMAKE_CONFIGURATION_TYPES="Release;Debug".
The first configuration is the 'default' configuration which is
built when calling ninja with no arguments.
To build all targets of a certain configuration use "ninja all:Release"
or "ninja all:Debug".
To build all targets in all configurations use "ninja all:all".
Note that the first configuration influences which configuration of
tools will be used when building the libraries for all configurations.
In simple terms, when configured with
-DCMAKE_CONFIGURATION_TYPES="Release;Debug" the release version of moc
is used by AUTOMOC.
When configured with -DCMAKE_CONFIGURATION_TYPES="Debug;Release"
the debug version of moc is used by AUTOMOC.
Framework builds and Ninja Multi-Config don't currently work together
due to multiple bugs in CMake, which ends up generating an invalid ninja
file with duplicate rules. There are also issues with placement of the
debug artifacts.
This will be handled in a follow up patch after CMake is fixed.
Task-number: QTBUG-76899
Change-Id: If224adc0b71b7d1d6606738101536146aa866cd7
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
This manifested in Coin when ninja tried to build qdrawhelper_sse2.cpp
before the Core framework headers were copied, resulting in a
fatal error: 'qatomic.h' file not found.
Make sure every SIMD object library has all PRIVATE dependencies of
its parent library PRIVATE dependencies (except for other SIMD object
libraries), to make sure that the framework headers are copied by the
time the SIMD source file is compiled.
Here's an example for clarification. Gui_simd_sse2's LINK_LIBRARIES
property should have all the values of Gui's LINK_LIBRARIES property
(like Qt::Core) filtering out all SIMD object library targets (
like Gui_simd_sse2, Gui_simd_sse3, etc).
Thus we make sure the SIMD object libraries are built after Gui's
dependencies are built.
Note that using INTERFACE_LINK_LIBRARIES to avoid the filtering of SIMD
targets in the generator expression would only work in shared Qt builds.
In static Qt builds where PRIVATE dependencies become PUBLIC, CMake would
insert $<LINK_ONLY:Gui_simd_foo> entries in INTERFACE_LINK_LIBRARIES
which causes CMake to be confused and fail at generation time.
Change-Id: I246c1394b9c9830c0ebd11e6621e56b992a6a1f2
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When running tests with CMake's CTest, set the environment
QT_TEST_RUNNING_IN_CTEST to 1. This can be useful to deal with tests
that do not properly work when running from CTest.
For instance, the qmake test in this patch has one test that only works
when not run from CTest.
Change-Id: I01eea9131de69c18118a9ed9f96e9296d5ea20f1
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Framework builds are enabled by default on macOS.
They are controlled via the framework feature.
Task-number: QTBUG-75751
Change-Id: I00bc64672f02bbd1672508b2b5010d202984a961
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CMake Build Bot
Adds custom targets which take care of generating and installing
documentation files.
Every module has a global set of targets suffixed with the module
name in order for them to be unique when we implement super builds.
The targets are the same as the list below, but replace ${target}
with the module's name. Eg.: docs_qtbase.
For every target which has an qt_add_docs() call, we now create the
following set of custom targets:
* docs_${target}
* html_docs_${target}
* qch_docs_${target}
* prepare_docs_${target}
* generate_docs_${target}
* install_docs_${target}
* install_html_docs_${target}
* install_qch_docs_${target}
Fixes: QTBUG-75859
Change-Id: Ie84cb9a2dedbe7333d9a84f4d73383442deca477
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: Iba5104cccdc613f7b2cf0d1454209578adaac824
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We can't use qt_internal_export_modern_cmake_config_targets_file for
executables like tools, because it's not possible to use
INTERFACE_LINK_LIBRARIES with executables like you can with libraries.
We also can't create aliases to non-global imported targets.
Instead create new imported executable targets, fish out the imported
location, and assign it to the versionless targets.
Task-number: QTBUG-74137
Task-number: QTBUG-80477
Task-number: QTBUG-75984
Change-Id: I6a3c9c67ef4699c72a6c9a627c63158dfd6557f8
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Otherwise if you configured a commit that has tool A, and the switch
to a commit where tool A does not exist anymore, reconfiguration
will fail.
Change-Id: Ibb244b9630a6f4fecd27d51ce28eceff07ba8666
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch adds a new bootstrap tool which will read CMake's
AutoGenInfo.json and ParseCache.txt to determine what the current
list of json files is that needs to be passed to moc --collect-json
option.
Right now this is enabled for qt_add_module() with the option
GENERATE_METATYPES. pro2cmake has also been updated to detect qmake's
CONFIG += metatypes and to generate the above option for modules.
The implementation lives in Qt6CoreMacros so it can eventually be used
in the public facing apis.
The generated meta types file is saved under the target property
QT_MODULE_META_TYPES_FILE.
Change-Id: I03709c662be81dd0912d0068c23ee2507bfe4383
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Needed when building Qt Creator with CMake + Qt6 non-prefix build.
Specifically qttools's QtUiPlugin does not have any private headers,
but the non-existing include path was exported, which caused an error
when configuring Qt Creator.
Change-Id: I662bc502fe3134fba083bde273b7f63fe1470277
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Tested locally with the following configurations:
- iOS device builds (arm64)
- iOS simulator builds (x86_64)
- iOS simulator_and_device builds (fat arm64 and x86_64 archives)
All iOS builds currently require a custom vcpkg fork which contains
fixes for building the required 3rd party libraries.
qtsvg, qtdeclarative, qtgraphicaleffects and qtquickcontrols2
have also been tested to build successfully.
simulator_and_device builds are also supported, but require an umerged
patch in upstream CMake as well as further patches to vcpkg.
Task-number: QTBUG-75576
Change-Id: Icd29913fbbd52a60e07ea5253fd9c7af7f8ce44c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
In the qtwayland repo, both WaylandClient and WaylandCompositor
packages need access to the qtwaylandscanner tool. That means
that the add_qt_tool(qtwaylandscanner) can't use the TOOLS_TARGET
argument to associate a dependency with only one of the above
modules.
Instead add_qt_tool now allows specifying a non-existent module
name for the TOOLS_TARGET argument, which can be manually
depended on by other packages.
Actually, you could specify the non-existent module before as
well, but that didn't do everything that had to be done.
This required a bit of refactoring in how the Dependencies file
for Tools packages is created. Now the file is created in
qt_export_tools.
Two new functions were also added to allow recording additional
dependencies between packages.
Also some bug fixes were done to make it all work. Specifically
the _FOUND variable generated in the Dependencies file was incorrect.
Also there are some quotes missing when appending extra package
dependencies via the QT_EXTRA_PACKAGE_DEPENDENCIES property.
Change-Id: I167efec16dff8d036e191df3572ea72764e22bc5
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Instead of hardcoding which platforms and which compilers support
certain linker features, do the proper probing via
check_cxx_source_compiles.
Change-Id: I676010970d8f3a8f2a8340c5d15dfcef76fe9191
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Clang doesn't have a mkspec just a win32-clang, there is
win32-clang-g++ and win32-clang-msvc.
Change-Id: Iff521e955559dfb2308e377b41e86b3f62c42e70
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In qtwayland, there were a bunch of warnings of the following type
when configuring:
"The plug-in 'f' does not belong to any Qt module".
This happened because the plugin type had underscores, and was not
sanitized when comparing a the plugin type of plugin.
Add a function to do the sanitization, and use it everywhere.
Change-Id: I728b5f1e18fa5f8876c4a57dbd4e33148cb242d5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Rename internal APIs like extend_target to qt_extend_target.
Prefix apis with qt_ where required.
Keep old names for compatibility until all their usages are removed.
Change-Id: I9a13515a01857257a4c5be3a89253749d46a4f41
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Unfortunately not all repositories are marked as warning_clean
in their .qmake.conf files. For instance qtconnectivity and
qttools are not warning clean. Therefore we need to skip
warnings_are_errors flags on all targets created in that repository.
Add support for skipping the warnings are errors flags, by setting
a QT_SKIP_WARNINGS_ARE_ERRORS property on a target, and use that
within a generator expression with all the accumulated flags.
To mimic behavior of qmake, and set the property on all targets
created by add_qt_module, add_qt_plugin, etc, one simply needs
to set the QT_REPO_NOT_WARNINGS_CLEAN variable in the
repo project CMakeLists.txt.
Change-Id: Ib5a487af6601ae1519a0988a89f8083f94f92267
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This patch adds add_qt_manual_test() which is a simple wrapper around
add_qt_executable() which does not build under ${CMAKE_BUILD_DIR}/bin
or install the targets.
This could potentially be used later to tag manual tests.
Change-Id: Ic4e0a1d133009f5a858b9394347a0996cf42683f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In gui's CMakeLists.txt we have
if (NOT ANDROID)
...
add_qt_simd_part(Gui SIMD neon SOURCES ...)
...
endif()
and later
if(UNIX AND NOT ANDROID AND NOT APPLE_UIKIT AND NOT INTEGRITY AND NOT (TEST_architecture_arch STREQUAL "arm64"))
add_qt_simd_part(Gui SIMD neon
endif()
Since add_qt_simd_part internally uses an OBJECT library to compile the
sources with different flags and then link into Gui (in this case), we
may end up with an error when add_qt_simd_part is called twice for neon,
because the constructed target (Gui_simd_neon) exists already.
We can re-use an existing target though, as the SIMD features is the
same.
Change-Id: I7a21c6e66b47e918a53fa3b1a7db9e053ecc8d87
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When a _nolink target is exported, instead of getting the original
namespace prefix, it gets the Qt6 prefix
(OpenSSL::OpenSSL_nolink -> Qt6::OpenSSL_nolink).
There is some special case code in Network autotests which tries
to access the former target name, which doesn't exist when building
standalone tests.
Make sure to create a Qt6:: library alias for _nolink targets during a
build (so before the library is exported), and change the Network
autotests project to use this Qt6:: namespaced library, which will
ensure it is found both in a standalone tests build and in a regular
Qt build.
Also make sure to actually call find_package to find the OpenSSL
library when building standalone tests, otherwise configuration will
fail.
Change-Id: I3da5b958e72e745a50380f8ab1644459a7c6b005
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Don't call qt_android_dependencies for interface libraries.
Also make sure not to set properties which don't start with
INTERFACE_ prefix.
Change-Id: I0afdffd34c9aebe0d7ac4731b57dd4d505f84570
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
It only makes sense for non-interface libraries.
Change-Id: I80ac942ed546a6ac866e827aa2026e4e6ac897b2
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Convert benchmark executables to add_qt_benchmark().
Currently add_qt_benchmark just calls add_qt_executable() and
ensures that it they build under CMAKE_CURRENT_BUILD_DIR and do not
install.
Add QT_BUILD_BENCHMARKS option to enable/disable building of benchmarks.
Change-Id: Id0bc676698d21d50048d97d9abef51d92ccb6638
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The last set would override the variable instead of appending to it,
thus QT_DISABLE_DEPRECATED_BEFORE was never set.
Change-Id: I173b91704a855fcda1f2b86172d318e3953466db
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
If we do not encounter the load(qt_plugin) statement in the .pro file
but we do see the entry CONFIG+=plugin, treat the target as a regular
CMake library instead of treating it as a qt_plugin by default.
Change-Id: I67ad5c865a1a5ab691a6b0d86c2db4b686aa04dd
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch converts all add_executable calls when building for Android
to a module library and replaces the call to add_test() to use
the android testrunner binary.
Change-Id: I10ba5919217cdc93cc2cbbb7d13ad9d10fc5ac1a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
e1fd607493 in qtbase removed the
qml1 imports enum from qlibraryinfo.cpp, qconfig.cpp, etc.
With the recent merge from dev, this was not adjusted in
qt_generate_qconfig_cpp, and thus we generated one too many strings
in qconfig.cpp, which resulted in
QLibraryInfo::location(QLibraryInfo::Qml2ImportsPath) returning
"imports" instead of "qml" subfolder, thus causing all qml modules
not being found.
Fix this by removing the extra qconfig.cpp entry, and all other
references to the location.
Change-Id: I128f667281138e2e0ef0fe1ced4af0405c532fef
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This patch adds two custom targets to generate android apks. The
targets are named ${TARGET}_prepare_apk_dir and ${TARGET}_make_apk. The
first one insures the binary is copied to the right location and the
latter invokes androiddeployqt on the apk directory.
Change-Id: I8152cef387b50ec03ee2bfd92b56910a6f22754c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use STRING type for install locations as we use them relative to the
CMAKE_INSTALL_PREFIX.
PATH type will get expanded to absolute paths by newer CMake versions,
so that breaks our logic.
Change-Id: I36be1f0378c4fb07ad8db0051d540f9d243000be
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Write out a file with some JSON data to describe a module.
This file contains information on how that module has been built.
Change-Id: I8a604692663cbb7b76b96b97124130e30b822e4b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
