ISO date format doesn't allow spaces within a date, although 3339 does
allow a space to replace the T between date and time. Sixteen tests
added to check this all failed. So clean up the handling of spaces in
the parsing of ISO date-time strings.
[ChangeLog][QtCore][QDateTime] ISO 8601: parsing of dates now requires
a punctuator as separator (it previously allowed any non-digit;
officially only a dash should be allowed) and parsing of date-times no
longer tolerates spaces in the numeric fields: an internal space is
only allowed in an ISO 8601 date-time as replacement for the T between
date and time.
Change-Id: I24d110e71d416ecef74e196d5ee270b59d1bd813
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Cite RFC 3339 as basis for allowing a space in place of the T, too.
The RFC mentions that ISO 8601 accepts t and z for T and Z, so test
for them case-insensitively. Add a test for this.
Change-Id: Iba700c8d74d485df154d27300aab7b1958e1ccef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If milliseconds were followed by a space, the space was included in
the count of "digits" read as the fractional part; since we read (up
to) four digits (so that we round correctly if extras are given), a
harmless apce could cause scaling down by too large a power of ten.
Since QString::toInt() ignores leading space, we were also allowing
interior space at the start of the milliseconds, which we should not,
so catch that at the same time. Added tests, including one for the
rounding that's the reason for reading the extra digit, when present.
Fixes: QTBUG-80445
Change-Id: I606b29a94818a101f45c8b59a0f5d1f78893d78f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime is a friend of QTimeZone, so can access its internals; but
it must check the zone is valid before doing so.
Expanded tst_QDateTime::invalid() and made it data-driven to catch the
failure cases.
Commented on a test-case that caught a mistake in my first attempt at
this, and on QDateTimeParser's surprising reliance on a quirk of
QDateTime::toMSecsSinceEpoch()'s behavior.
Fixes: QTBUG-80146
Change-Id: I24856e19ff9bf402152d17d71f83be84e366faad
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
macOS fails to create a zone for the name its own systemTimeZone
claims to have (see new comment). So make sure we do consistently
recognize the name systemTimeZoneId() returns, using systemTimeZone
from which we got its name.
Add minimal testing of system time-zone.
Fixes: QTBUG-80173
Change-Id: I42f21efbd7c439158fee954d555414bb180e7f8f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The ones we reject used a zero offset while the one that does parse
(though it shouldn't - revised comment) has a one hour offset. Made
them all use that offset and added a partner test that has no invalid
characters, so ensure the success of the invalid character tests isn't
due to falsely rejecting the valid date/time text to which the invalid
characters are added.
Task-number: QTBUG-80038
Change-Id: I6e3dd79b981af6803e60877229c56599cfd719cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The qdatetime implementation's rfcDateImpl() uses regexes which did
not match its comments; nor did either the regexes or the comments
match what was documented. A review of relevant RFCs suggests we
should revise this in future, probably at Qt 6.
The documentation also only addressed the formats recognized when
parsing a date-time, without indicating how they are serialised or how
dates and times are handled separately.
Added a note to the tests for the read-only formats, to remind the
reader that the RFCs merely recommend recognising these - be
permissive in what you expect and strict in what you deliver.
Change-Id: I0f0bec752e7a50bde98cceceb7e0d11be15c6a6f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Android uses its own time-zone naming, which includes a zone called
"Canada/East-Saskatchewan", whose second component is 17 characters
long. This violates a rule in the IANA naming scheme for zones, that
limits components to 14 characters each. So tweak the isValidId()
check to allow Android its long names.
Android has added Outer Mongolian time-zones, which are as borked as
many others in 1970, so blacklist those transitionEachZone() tests.
Fixes: QTBUG-69128
Change-Id: I46f674f095431335b16900860d83b624257ae3bb
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
They were tucked away in the back-end of the isTimeZoneIdAvailable()
test, but a separate isValidId() test had been added more recently,
which made some (arguably all) of them redundant. Reworked this test
in the process, so that the QSKIP() happens in _data() once instead of
in the test that's never run because there are no data rows.
Change-Id: Icaa6227ace9a1aa944d085691cdcfb3adf4a51dc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A default-constructed QDateTime is invalid, but compared equal to a
valid one referencing the start of 1970. This lead to date properties
in QML being initialized invalid but not getting an onChange if the
first value they're set to is the start of 1970.
Fixing that then lead to some tests failing. Indeed, the original
equality check involved using toMSecsSinceEpoch(), whose value is
undefined unless the datetime is valid, without a prior check on its
validity: so ensure all uses of toMSecsSinceEpoch() are guarded with
isValid() checks.
Reworked tst_QDateTime::toSecsSinceEpoch() to use its bool column
(previously unused, after separating from toTime_t(), which uses this
column for "out of time_t's range") for validity of the datetime.
[ChangeLog][QtCore][QDateTime] Invalid datetimes are now treated as
equal and less than all valid ones. They could previously be found
equal to valid datetimes.
Fixes: QTBUG-79006
Change-Id: Ie72deb8af4350a5e808144d0f6e42dc8eb3ff5ef
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is no year 0 in the proleptic Gregorian calendar, so QDate()
won't be happy if asked for a date in it. Tweak scanning of the data
we get from MS-Win so as to avoid a date calculation that could
otherwise happen in year 0 when constructing
QDateTime(QDate(1, 1, 1), QTime(0, 0, 0), QTimeZone("Australia/Sydney")).
Added a test for this case, which Oliver Wolff has kindly verified
does reproduce the assertion failure. However, Coin is unable to
reproduce, as all its MS builds are configured with -release, so
Q_ASSERT() does nothing. (The relevant code then skips over year 0,
albeit for the wrong reasons, and gets the right results, albeit
inefficiently, leaving no other symptom by which to detect the
problem.)
Fixes: QTBUG-78051
Change-Id: Ife8a7470e5bd450bc421e89b3f1e1211756fc889
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Words should not be abbreviated.
Split a long line and reflowed some comments in the process.
Fixes: QTBUG-78008
Change-Id: I52d75409f02e2cecbed3e94d424617ad594c275b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This has its own locale data, extracted from CLDR. This data may
potentially be shared with other variants on the Islamic calendar, so
is handled by a separate base-class, QHijriCalendar, on which such
variants may base their implementations.
[ChangeLog][QtCore][QCalendar] Added support for the Islamic Civil
calendar, controlled by feature islamiccivilcalendar, with locale data
that can be shared with other implementations, controlled by feature
hijricalendar.
Fixes: QTBUG-56675
Change-Id: Idf32d3da7034baa8ec5e66ef847e59a8a2f31cbd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This has its own locale data, extracted from CLDR.
[ChangeLog][QtCore][QCalendar] Added support for the Jalali (Persian
or Solar Hijri) calendar, controlled by feature jalalicalendar.
Fixes: QTBUG-58404
Change-Id: Id5c56a10db05a4fd612aafc01615273db81ec743
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These share their locale data with the Gregorian calendar, making them
virtually free to add. Still leave them out of the boot-strap build,
though.
[ChangeLog][QtCore][QCalendar] Added support for Julian and Milankovic
calendars. These are enabled by default, except in bootstrap builds.
Change-Id: I585045ed9e78c1e959957f6772b3e144093b701c
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add QCalendarBackend as a base class for calendar implementations and
QCalendar as a facade via which to access it.
QDate's implicit implementation of the Gregorian calendar becomes
QGregorianCalendar and QDate methods now support choice of calendar.
Convert QLocale's CLDR data for month names to a locale-data component
of each supported calendar and relevant QLocale methods now support
choice of calendar. Adapt Python scripts for locale data generation to
extract month name data from CLDR (keeping on version v35.1) into the
new calendar-locale files. The locale data for the Gregorian calendar
is held in a Roman calendar base, for sharing with other calendars.
Add tests for basic uses of the new API.
[ChangeLog][QtCore][QCalendar] Added QCalendar to support diverse
calendars, supported by implementing QCalendarBackend.
[ChangeLog][QtCore][QDate] Allow choice of calendar in various
operations, with Gregorian remaining the default.
Done-with: Lars Knoll <lars.knoll@qt.io>
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Fixes: QTBUG-17110
Fixes: QTBUG-950
Change-Id: I9d6278f394269a183aee8156e990cec4d5198ab8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
These tests have not failed on the removed platforms for at least 60 days
Task-number: QTBUG-76608
Change-Id: If7a9f4db907124e3cd54e3f4b0ad3e20717d1912
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Replaced the usages of:
* QDateTime::toTime_t() -> QDateTime::toSecsSinceEpoch().
* QDateTime::fromTime_t() -> QDateTime::fromSecsSinceEpoch().
* QDate::shortDayName() -> QLocale::system().dayName().
* QTime by QElapsedTimer, where the deprecated methods of QTime
were used.
- Modified the tests for the deprecated methods to be enabled only
when the corresponding methods are enabled: when the deprecated
APIs are disabled, the tests will be also disabled, and the
compilation won't be broken.
Task-number: QTBUG-76491
Change-Id: I4d565db2329e580c567aae511696eb1efe120843
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
As planned when adding YearRange: now that it's merged up to dev, move
it to QDateTime, since we can add to the API at 5.14.0.
This follows up on commit 82ad4be4a2.
Change-Id: I81b6c2331121a71e2592514781c02c5756e70c52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We'll be adding calendar code here as well, and tools/ was getting
rather crowded, so it looks like time to move out a reasonably
coherent sub-bundle of it all.
Change-Id: I7e8030f38c31aa307f519dd918a43fc44baa6aa1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
