Without any content it was hard to see the window. Put some lipstick on it.
Change-Id: I0fefffb0a4deba7ac91e67a6153a9a27308fe493
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The latter would allow one final resize that would immediately
jump to 300x300.
Change-Id: I566e5e9dc1fb07f748f528f002166a8438344173
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Conflicts:
src/corelib/tools/qvarlengtharray.qdoc
src/corelib/tools/qvector.qdoc
Resolved documentation changes in favor of 017569f702,
which keeps the move overloads along with its const-ref sibling.
Change-Id: I0835b0b3211a418e5e50defc4cf315f0964fab79
When calling setSceneRect() on a QTouchPoint it will cause the
ellipseDiameters to be changed, whereas this should not be affected by
the scene rectangle as it should be in logical pixels.
Also add a manual test for visually checking the ellipse diameters on
various devices.
Change-Id: I1ee9207cb1a63cfef33fe904594c73aba221af5c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Add information about mouse tracking/grabbing for widgets
and window where applicable.
Change-Id: Idfe8bef6d146ff06dfe95c0bad5e29e7a4ea7adc
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Refactor the page displaying the standard pixmaps of a style:
- Use a QGroupBox
- Sort items by enumeration name
Add a page displaying the standard icons along with the list of
sizes.
This allows for conveniently checking which resolutions are available.
Change-Id: I2d7f655456fc3e7013c2582ad520b6ac582951e6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Extract a helper function to determine the window title from QXcbConnection
and add an invokable function to the native interface that dumps the window
tree similar to existing functionality on Windows.
Change-Id: I5544d69ea2b801eb16d3b5b8d64021b3e567b0d8
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We can use the D-Bus / systemd machine-id file (which is a UUID without
the dashes) on systems with D-Bus. On Windows, there's a value in the
registry that is filled when Windows is installed, like on Linux. For
BSD systems, the kernel has a UUID we can use too, so extract that.
Task-number: QTBUG-63425
Change-Id: I27eaacb532114dd188c4ffff13d32f2e3c1d74bb
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead of waiting for the menu delegate to update each item,
we can attach an NSMenu to its NSMenuItem as soon as we update
the current window's menubar. This is safe to do because we
know that this is going to be the main menubar right after, so
we're not orphaning any NSMenuItem from its NSMenu at the wrong
moment.
By doing this, we also ensure that all menus from the active
menubar are reachable by the key-equivalent dispatching logic,
even before we display the actual menu.
This was shown in BigMenuCreator where, under the menubar's ASP
and SAP menus, all A*S submenus would be disabled. Furthermore,
on the same menus, SAP would show the same issue.
Added test in Menurama as well.
Change-Id: If6e7311072e6b53ad1cbced73623d1832aa0df8e
Task-number: QTBUG-57076
Task-number: QTBUG-63712
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
We have found that there are three important operations
when it comes to menu creation and putting it up in the
native menubar:
* Adding the action to its parent menu
* Setting the submenu as the action's menu
* Populating the actual submenu
This application tests all possible permutations for these
three operations, starting from the menubar and down two
more menu levels.
Two command-line options allow, first, to create a late
menubar that will replace the original menubar from the main
window form (--new-menubar) with, second, the option of
creating it parentless (--no-parent) before setting it as
the new main window menubar.
While mostly interesting for platforms supporting QPA menus
and menubars, this could be useful as a trivial check for
QMenu and QMenuBar in a pure QWidget environment.
As of today, the application shows at least three issues on
macOS which will be fixed in upcoming patches.
Change-Id: Id3c1e0f346c6fe27ab4656ff045b88a0a8623740
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We need to ensure that simultaneous touch and tablet input is possible.
Change-Id: I0c0d06e382b6b89e11ed06c1e4ad0db63b3b7c82
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Before this patch a very accurate drop position below
or above an index was needed. Therefore it was not that
easy to do.
This patch increases the above/below area to be about
18% of the item (still leaving the most space for the item).
An average user will likely be 2-3x faster with dropping
below or above (while not losing much when dropping on items).
[ChangeLog][QtWidgets][ItemViews] Made it easier to
drop above and below items.
Change-Id: I47f0f80c76878c17ebf3f93d0a0cc82755971c2a
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
All systems must implement it by now. If there's any system still
without it, that means it has no IPv6 support, so they can disable
QtNetwork entirely.
[ChangeLog][Deprecation Notice] Starting with Qt 5.10, IPv6 support is
mandatory for all platforms. Systems without proper IPv6 support, such
as the getaddrinfo() function or the proper socket address structures,
will not be able to build QtNetwork anymore.
Change-Id: I3868166e5efc45538544fffd14d8c28046f9191b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Proximit events are sent to the QGuiApplication, catch them via
event filter.
Change-Id: I7f896e7d9f5c90347b9e3c708feb69abd1c5fc95
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Child QWindows (or in the case of QWindows embedded in native applications:
top level QWindows where the corresponding NSView is a child of another
view, so not being the contentView of its window), still need some of the
NSWindow notifications to e.g. update their exposed state when the window
becomes visible.
We make sure to send the notification to all QCococaWindow children of
the relevant NSWindow, and let each callback decide if it should only
apply to content views.
This fixes an issue where a QWindow would never be exposed if the window
was a child NSView and added to a NSWindow that was yet to be shown.
Change-Id: I7f7df8bc5f4ca3ac553a2c146f8c3229b197c059
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
There's no need for us to walk our own ancestor chain to figure out which
cursor to set. AppKit will automatically call cursorUpdate: on the view
that would be the hitTest target of the current mouse position, and by
falling back to super when no cursor is set for the current view, we
automatically get the behavior that effectiveWindowCursor tried to solve.
In addition, it solves the case of applyEffectiveWindowCursor applying
the arrowCursor when no cursor was set, which would mean that if any
native parent view of our view _did_ have a cursor set, we would not
fall back to the native view's cursor, but instead override it with
the arrow cursor. Following the responder chain gives the correct
behavior in this case.
Unfortunately, due to rdar://34183708, if a subview of one of our
views uses the legacy cursorRect approach to cursor management, the
cursor will not be reset back to our cursor via cursorUpdate: when
leaving the child and entering the parent view (our view). Moving
our implementation over to the legacy API would solve this problem,
but just propagate it to native parent views of our views, which
could potentially use NSTrackingAreas, and would not have _their_
cursors re-set.
Change-Id: Id20cc03136f0b1d4b9120750fe63ddc455363aaf
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- Add view to contentView, to allow checking parent view interaction
- Render via requestUpdate instead of manual timer
- Add two windows to check subview interaction
Change-Id: Ib028e62f585d45e42c0429e69ea6f45c8a90fe54
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
Change c12072c685 fixed a problem
where tab labels would overlap with the icons if the tab became
too small to contain the text. But it did not properly account
for the full area occupied by the icon, because the horizontal
padding is hardcoded to 4 in the mac style, whereas in the
common style (where the icon is drawn) it uses the pixel metric
for this.
In addition, the change only allocated space on the left side,
causing the label to no longer be centered.
Task-number: QTBUG-61235
Change-Id: Ieec4f7044584361f92045addbc8bbd81bd5c9fc7
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Calling -[NSMenu update] every time we add a new item can result in
a quadratic behavior since the function itself will iterate over all
the items in the menu. We solve this by using a 0-timer which will
trigger the call to update the next time the event loop spins.
Menurama manual test updated.
Change-Id: Ic155d364515cc93eb81b1c8085c8e44c93799954
Task-number: QTBUG-62396
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
It was working on Linux because _GNU_SOURCE gets us POSIX.1-2008
compatibility, but not on macOS or the BSDs. There, we were still stuck
to full second precision.
This commit uses the template trick introduced by the futimes code
(which itself was inspired by commit 2fb42eb4af
in QtNetwork). Also note how it adds support for birth time, if the
system's stat struct has that information.
Tested to work on MacOS and FreeBSD. The manual filetest produces:
Name: .
Path: . (/usr/home/tjmaciei/src/qt/qt5)
Size: 1536 Type: Directory
Attrs: readable writable executable hidden nativepath
Mode: drwxr-xr-x
Owner: tjmaciei (1001) Group: tjmaciei (1001)
Access: 2017-07-13T20:03:47.916
Birth: 2017-07-13T20:03:47.916
Change: 2017-07-13T20:04:41.648
Modified: 2017-07-13T20:04:41.648
Linux will require support for statx(2).
Change-Id: I8d96dea9955d4c749b99fffd14cd97d7a8c6d45d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Commit 32a94e54 changed the API of the QPS engine (PaintCommands
class). Update the usage accordingly.
Change-Id: Ide57609e636dad0aa434d1049b600b72f731bc30
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Covers non-document mode, tab icon, and adds a more
useable interface. Some parts are still missing, like
tab orientation and long tab titles.
Task-number: QTBUG-61092
Change-Id: Idbda84f513e3ff7f87fa04ae4476b11bd8bb6bf2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Fix regression introduced by 175f33ed8. 'expanding' property set to true
was ignored when QStyle::styleHint() returned Qt::AlignRight for
SH_TabBar_Alignment.
When we calculate tabs geometry, we put an empty tab at the front and
back and set its expansive attribute depending on tab alignment AND
'expanding' property.
Task-number: QTBUG-61480
Change-Id: I6a1827ae8a3f2c6bee5124c18c7f2b1c0a7862f3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Change-Id: Ia0eddcb385207ada8c3df59d49ff1de27a2aeb71
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In FileDialogPanel::options(), QFileDialog::DontUseCustomDirectoryIcons
was set when the "Don't use custom directory icons" box wasn't checked.
Change-Id: I6e9d9b41cf91f4abcc98c02bed44675908a8391d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
