Currently, using QDate::maxJd() in tests will fail. This patch changes
some ints to qint64s to prevent overflows where necessary.
Change-Id: I61ebf8f233411a7544689fd5bfa9c3abee54e933
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTextCodec::codecForHtml currently fails to detect the charset for this
HTML:
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=9,chrome=1">
<title>Test</title>
</head>
This patch makes the detection of charsets more flexible, allowing for
the use of the HTML 5 charset attribute as well more terminator characters
("'", and ">").
I also added a *_data function for the unit tests.
Task-number: QTBUG-5451
Change-Id: I69fe4a04582f0d845cbbe9140a86a950fb7dc861
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
This commit adds SHA3 support to QCryptographicHash. Two implementations
are provided, one optimised for 32 bit and one for 64 bits. The code has
been written to make it easy to add further implementations, for example
ones using NEON instructions on ARM.
Change-Id: I3be9c45bbd4fcc2771d697e7f7ae74e48a831e8f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The table is there to know which domains are allowed to set cookies
and which are not. There are more than 2000 new entries since the
list has last been generated.
The split to 64K chunks was made because this is the hard limit for
strings in Visual Studio.
Change-Id: I511aec062af673555e9a69442c055f75bdcd1606
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The existing tst_qgetputenv shows that qputenv with an empty value
doesn't lead to the same result on Windows and on Unix, and there was
no way to fully delete an env var on Unix (which is needed for some
env vars where not-set and empty are different, such as TZ,
see `man tzset`).
This is also why qglobal has qEnvironmentVariableIsSet() vs
qEnvironmentVariableIsEmpty(), on the getter side.
Qt4's ifdefs around unsetenv in qapplication_x11.cpp show that this is
needed within Qt too (although this particular startup notification code
has to be re-imported into Qt5 still).
Change-Id: I631c8cddbcf933d4b9008f11aefc59f5a3c7c866
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It may be useful to know which named capturing groups are defined
in an regular expression, and for each of them, what's the
corresponding index. This commit adds the needed method
to QRegularExpression.
Note that extracting the information doesn't happen while holding
the mutex in the private -- pcre_fullinfo just reads information
from the compiled pattern, so that's thread-safe.
Task-number: QTBUG-29079
Change-Id: I50c00ee860f06427c2e6ea10417d5c0733cc8303
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a sourceModel resets, it's roleNames might have changed. This
is most likely the case if sourceModel itself is also a proxy model
of which the sourceModel was changed.
Task-number: QTBUG-28982
Change-Id: I102788f2c9bf97b4002b350673f9219e32e7a052
Reviewed-by: Nils Jeisecke <jeisecke@saltation.de>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
type is unsigned long, should be %lu. Replace by stream.
Change-Id: Ib0346b54a4494910b4a5927d0de45840ca53fbda
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
This was part of Qt 4.8, but Qt 5.0 was branched before that, so
the commit was lost.
Change-Id: I2a2ab3c75a0943ac734d588ebd74bc158dd6aaaf
Reviewed-by: Nils Jeisecke <jeisecke@saltation.de>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QtTestLib and QTestLib don't exist. The proper name is "QtTest" (code)
or "Qt Test" (English)
http://qt-project.org/wiki/Spelling_Module_Names_in_Qt_Documentationhttp://lists.qt-project.org/pipermail/interest/2012-December/005221.html
Files paths in qttestlib.qdocconf can't be changed easily however, as it
breaks things. So, they're left as they are.
Change-Id: Ifbc44ea858c453bedad8cd7723f847e67fc7a85a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
This is to ensure that the compiler won't optimise it out of existence.
Clang says it will do it:
testProcessCrash/main.cpp:50:5: warning: indirection of non-volatile null pointer will be deleted, not trap [-Wnull-dereference]
*(char*)0 = 0;
^~~~~~~~~
Change-Id: Iac7771046442f869e205e8789fffdd6443d58e67
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The macro was made empty in ba3dc5f3b5
and is no longer necessary or used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2013-January/009284.html
Change-Id: Id2bb2e2cabde059305d4af5f12593344ba30f001
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
These tests were added to Qt 4 on commit
a17fc85b51a6bdcfa33dcff183d2b7efd667fb92
Task-number: QTBUG-28985
Change-Id: I3cf595384f14272197dcfb85943213c8f8ddeba0
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Add function to move back data to the stack.
Change-Id: Ic78a368459bce68629e29602e4eeae2e1afe398b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I66c4e274c8b686d8a69476ad10751008f256e5a2
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
VxWorks does not have QProcess support.
Change-Id: I917b769f967e9d71ec5025aae788f3e237b07aeb
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
(cherry picked from commit 416e73a0fc)
The writer delegate used by QJsonDocument to produce a Json QByteArray
supports generating a human readable Json (with spaces and carriage
returns that reflect the Json structure) and a less human readable (no
spaces nor carriage returns) but more compact Json.
The method toJson() was extended with a format argument to support
the compact Json generation.
Task-number: QTBUG-28815
Change-Id: I8d13849ab9ab6ed7c645011260251dc14a8629d2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Debao Zhang <hello@debao.me>
Return value of the QFile::decodeName(qgetenv("HOME")); is never null
if HOME environment variable is not set. So need to check the return
value using isEmpty() instead.
Task-number: QTBUG-28912
Change-Id: Ic57b1978d63e99b056cde35ca8cb9d2a07ff8ce8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The test is compiled since QT_UNICODE_LITERAL is always defined
on Windows and ref.isStatic()) then fails since C++ 11 is not
enabled.
Task-number: QTBUG-29014
Change-Id: I357574a493c5191f1463e7ee5851d7db0e569315
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unlike the previous implementation, this implementation is locked:
only one initialisation is ever run at the same time. It is
exception-safe, meaning that a throwing constructor will restart the
process.
Also, start using the thread-safe behaviour that GCC has offered for a
long time and C++11 requires.
Change-Id: I20db44f57d258923df64c0051358fd0d9a5ccd51
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Introduce variables for the paths used in the test and
check in initTestCase().
Change-Id: Ie801266e30cd860e5bdf079c1182fe385f9598c7
Reviewed-by: David Faure (KDE) <faure@kde.org>
Qt 4.8 shows frequent crashes in runMultiple apparently caused
by the QMutex construction in the free functions by different
threads. Use a common QMutex class member instead.
Change-Id: I851d4e2d3637a7b4f404ed843f5360c10caa21f5
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is intended to make it easier to understand what's happening when
this test is flaky during CI.
Change-Id: I13163c244cb99414d90b5f71c365a4ff2216bc83
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
So that the QTemporaryDir can happen even on error.
Change-Id: I728d49eac8bd65e1919fd314a95387949e134de0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This QIODevice uses a temporary file for writing, so that in case of
write errors, the writing operation is canceled, without losing any
existing file. It also avoids having a partially-written file visible
by other processes, at the final destination.
Change-Id: I9482df45751cb890b1b6f1382ec2eea3eb980627
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... by trying more often to get dates close enough to each other.
Change-Id: I370f7cd61bbb84fbb77ea96ff9fd82c1a6f1f76a
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This currently fails on case-insensitive file
systems since the check for existence then triggered
and indicated "file already exists".
Check on the file id (inode or file id) whether
the target file is really a different file for a
case-changing rename.
Task-number: QTBUG-3570
Change-Id: I1b2d40850692e02142ee23d2c753428de00aedc6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is necessary for initializing things in a library, which require
a QCoreApplication instance (unlike Q_CONSTRUCTOR_FUNCTION, which runs
before that). Example use cases: KCrash (segv handler), and KCheckAccelerators
(debugging tool triggered by magic key combination).
Change-Id: I5f4c4699dd4d21aea72b007989ba57467e86ed10
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Drop the read and write permissions for group and other users in the
system.
Change-Id: I8fc753f09126651af3fb82df3049050f0b14e876
Reviewed-by: Richard J. Moore <rich@kde.org>
This is a very common thing to do, e.g. in order to send urls via DBus.
Change-Id: I277902460ee1ad6780446e862e86b3c2eb8c5315
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Had to move QTextStreamPrivate to a private header, to be able to use
its new internal Params struct from qdebug.cpp
Change-Id: If28e25f27bbd04b1825a5eb3e2ef83ecad72e7b2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMessageAuthenticationCode is HMAC implementation based on
QCryptographicHash abilities. HMAC is often used in OAuth and similar
authentication protocols.
Change-Id: Ifc73947ad06c36a1b770315b7e89ba5c01c5e79e
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test runs fine almost all of the time on systems with 1
processor, which were the norm when the test was written and are still
the way that the Qt Continuous Integration system works as of
today. But it falls flatly on multi-processor systems.
The root of the problem is that QSystemSemaphore recreates the
semaphore if it disappears underneath it. However, the recreation
process is not thread-safe at all: if two threads race to recreate it,
weird things might happen. strace on Linux shows that a thread got
stuck trying to acquire the semaphore:
<... nanosleep resumed> NULL) = 0
stat("/tmp/qipc_systemsem_market5c9f73af73334ffe350c60ec076e5744db0ecda3", {st_mode=S_IFREG|0640, st_size=0, ...}) = 0
stat("/tmp/qipc_systemsem_market5c9f73af73334ffe350c60ec076e5744db0ecda3", {st_mode=S_IFREG|0640, st_size=0, ...}) = 0
semget(0x51001388, 1, IPC_CREAT|IPC_EXCL|0600) = -1 EEXIST (File exists)
semget(0x51001388, 1, IPC_CREAT|0600) = 114786308
semop(114786308, {{0, -1, SEM_UNDO}}, 1 <unfinished ...>
This problem does not happen if the creation and destruction of the
QSharedMemory (which uses QSystemSemaphore) does not race with other
threads or processes attaching and detaching. For the threads test
it's easy. For the processes, we use stdin and stdout as a
communication channel.
Change-Id: Ie11b135431d4abfc59234654848b67f622eb03c9
Reviewed-by: Richard J. Moore <rich@kde.org>
This convenience overload allows one to write
QRegularExpression re1, re2, ...;
QRegularExpressionMatch match;
QString subject;
if (subject.contains(re1, &match)) {
// ...
} else if (subject.contains(re2, &match)) {
// ...
} // ..
One can then inspect the results of a successful match in each block
(as well as extracting the captured substrings, etc.).
Change-Id: I0fb8be8b577656e8db994198f8105c26c4fe67b0
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows to put them in containers, and to enable subsequent
features for QString.
Change-Id: I3b3fe695ffe6930331ed9f670738376722e0fc36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This match type doesn't do any match at all; it's only necessary to
properly introduce default constructors for QRegularExpressionMatch
and QRegularExpressionMatchIterator (since they return the match type
that created them).
Change-Id: Ibfe92459c7fdd23129cf3afe073cd443c461ddeb
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Provide addition/subtraction for QMargins as well as
multiplication and division for int/qreal similar
to QPoint. Add unary minus.
Change-Id: If4eb831cfd610b34b5ca361619b1636031811d0a
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
- Addition of a QMargin to a QRect.
- Removal of a QMargin from a QRect.
- Remove implementation from Windows platform plugin.
Change-Id: Iae54bc13e94a7ece48853b1d3f3de2bfc154d2dd
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Check that the regular expression, the match type and the match options
returned by QRegularExpression/QRegularExpressionIterator are the
same ones passed to match / globalMatch.
Change-Id: Ibd282379bb60b53d614b1d56a7e08b3d6c236da6
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Add additional tests for the updates in the Qt4.8 qlocale data (CLDRv2.0) already existing in Qt5 locale data (CLDRv22.1):
- The NumberingSystem for some Indic and Slovak locales.
- The Month/Day name in Irish/Gaelic locale.
- The AM/PM Text in Turkish locale.
Change-Id: Iaea4f13ec79f94ab937b97f8ae60eb8d8f217c4b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ifd116dee32a450ff89a9a1011e26b434765d6e95
Reviewed-by: David Faure <david.faure@kdab.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: I54523eb854619917123d8816d3cd6c3a1f5b4c55
Reviewed-by: David Faure <david.faure@kdab.com>
If the dynamic_cast failed in QSharedPointer::dynamicCast or
qSharedPointerDynamicCast, we should avoid creating the QSharedPointer
that shares the weak and strong reference counts. In Qt 5, this does
not imply a leak since the original pointer is stored internally for
deletion. In Qt 4 it implies a leak under certain circumstances, which
this change fixes.
Task-number: QTBUG-28924
Change-Id: Id2de140de4cf676461e14b201ad250c53666b79d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
As they are built-in, they are effectively registered at compile-time
already.
Change-Id: I7ae6ba16088eab5d19213fa7b07c2a7760988a86
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Going through QLocale and QString is not really needed.
This also makes the result of the conversion of negative numbers
in bases other than 10 independent of the architecture and
implements the documented behavior of treating them as
unsigned types.
Change-Id: Ibc231dc5241deb5cbadd9796484a8b5f79c29410
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The Linux futex implementation had a Q_ASSERT for positive values, but
the documentation says that negative values should be interpreted as
infinite (equal to lock()).
Test that too.
Change-Id: I2f96a502d672732781e88e49797756ca9a809121
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Requires C++11 rvalue references and variadic templates so we can
implement perfect forwarding.
Change-Id: I62e47d1ffd0c61e8386f9f246aa79031b7430b46
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QUrl::fromUserInput("http://") was invalid, which doesn't make sense
since QUrl("http://") is valid. Same for "smb:" which is actually
even more a valid URL from a user's point of view.
Change-Id: I371ac393d61b49499edf5adbbc2a90b426fe9e5d
Reviewed-by: Marco Martin <mart@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These cases weren't handled before.
The validateComponent function is copied from QUrlPrivate::parse, with
the added modification that it now needs to check the gen-delims for
the userinfo.
Change-Id: I055167b977199fa86b56a3a7259a7445585129c6
Reviewed-by: David Faure (KDE) <faure@kde.org>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
...and remove the outdated QUnicodeTables::Script enum.
QFontEngineData now has one extra slot that never used
(engines[QChar::Script_Inherited]). engines[QChar::Script_Unknown],
if accessed, would be set with a Box engine instance, and could be used
as a minor optimization some time later.
In order to preserve the existing behavior, we map all scripts up to Latin to Common.
Change-Id: Ide4182a0f8447b4bf25713ecc3fe8097b8fed040
Reviewed-by: Pierre Rossi <pierre.rossi@gmail.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
... with respect to empty and null strings.
Change-Id: Ic107d5bcc8b659497a567b75a7244caceba5a715
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
...where the values are not aliased to Common script.
The old QUnicodeTables::Script enum was retained for compatibility reasons
until Qt internals are updated to use QChar::script().
Using QChar::Script instead of QUnicodeTables::Script would improve both
the text analysis (itemization, boundary finding) and the text shaping quality.
This also a required step for switching to Hurfbuzz-NG.
/* This adds 6668 more .rodata bytes */
Change-Id: I5aa3d12c550528d0052542436990f8d0779ea8e5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
When disconnect()ing through a QMetaObject::Connection, if the
QObjectPrivate::Connection contains a slot object, deref it, so
that it will be destroyed before the next run of cleanConnectionList.
Previously, a copy of the functor passed to connect() was kept until
QObjectPrivate::cleanConnectionLists was called (by adding a new signal,
or the sender was destroyed), even after a successful call to
disconnect(). That is, we were keeping that copy allocated without
any good reason.
Change-Id: Ie6074ea797df1611cb995dec07c5b5a742360833
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The QObjectPrivate::Connection refcount was not decreased
when disconnect()ing, therefore it was kept alive by the
owning QMetaObject::Connection object.
This removes a leak in case the QMetaObject::Connection
survives the sender object, after a successful disconnect().
Change-Id: Ie2ea59b269a0e589ae23c1457df7533be77c0797
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
More QVERIFY()s were added in the meanwhile to the test function,
so we can drop this one.
Change-Id: If6f137f45ba606b61d6a7004556a667ed316b61f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
qt is already added by spec_pre.prf, warn_on and depend_includepath by
default_pre.prf.
Change-Id: Ic00e0ba496d698ed9659c476f2ca99fc0f86a093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
We also need to detach() the taken value in case the compaction triggers and
modifies the underlaying data.
Change-Id: Idcdeba4236b8e208d107d41be2decbdfc5721300
Reviewed-by: Bjørn Erik Nilsen <post@bjoernen.com>
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
The address behind a string doesn't point to a string.
Change-Id: Ic54f652ae781fea278f60cc49d219c1c610ba29f
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This makes QT_PLUGIN_PATH / QCoreApplication::libraryPaths() actually work,
as a search path for plugins, when apps look for a specific plugin by name.
To make it possible to write portable code (unlike the current QPluginLoader
unittest), let QPluginLoader figure out the extension, too.
Change-Id: I895d597d7cb05ded268734bc5f313f32d8d12cb9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The QSslSocket one is both wrong and redundant as there is a
Q_DECLARE_METATYPE for it already.
Change-Id: I63d065abfb3d0e3d82a8b1f29a6752b7676db847
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
there is no point to use this for in-module references.
cleaning it out in an attempt to purge the constants entirely.
Change-Id: I1da4d70e3778257dd43eda0bdfc71eaec1124732
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Also change Trolltech for QtProject in other places
Task-number: QTBUG-23269
Change-Id: Ie4e344f23cab77c575562d18b481b3369ce30491
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Execute the test in a temporary directory, purge remaining files
except the special readonly-files in cleanup().
Avoid repeated invocation of QFINDTESTDATA() by assigning to
member variables.
Do more checks in rename(), check on contents of file.
Generally, use more QVERIFY2, print error messages.
Task-number: QTBUG-3570
Change-Id: Ibd0e11a361208a716ea3efbcca76adeda70e061a
Reviewed-by: David Faure (KDE) <faure@kde.org>
QCoreApplication::Type enum was removed in 553e21. This change updates
the (un)tested application types to match the application types
available in Qt 5.
Change-Id: I8631987a9ff31dc81baa013619cfc18616b851d1
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Since the documentation doesn't mention the search should be done by language only,
consider the current behavior incorrect.
As of now, it is possible to get a list of locales by Country or Script as well.
Also fix countriesForLanguage() to be in-sync with matchingLocales().
Change-Id: I6a09ca459120143565fa6099d2b823df1fed7c25
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
When compiling qmetatype auto tests with msvc2008 64-bit, I receive:
qmetatype.h(383) : fatal error C1128: number of sections exceeded
object file format limit : compile with /bigobj
This patch follows that advice and adds /bigobj to QMAKE_CXXFLAGS.
Change-Id: I05b3cf9dfdb6a93649c692e2df22365d200e6f2f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
As of Unicode 5.1, some punctuation marks were mapped to MidLetter and MidNumLet
for better URL and abbreviations handling which caused "hi.there" to be treated
like if it were just a single word;
until we have the Unicode Text Segmentation tailoring mechanism, retain
the old behavior by remapping (some of) those characters back to their old values.
Change-Id: I49dea6064f2ea40a82fc0b1bc3c4f0b4e803919f
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
When the floating-point behavior in MSVC is set to "precise" (default),
assigning nan numbers to a float causes the bit pattern to be altered
(only affects 32bit builds). We should therefore not assign the swapped
value back to a float and use it.
Task-number: QTBUG-25950
Change-Id: I7b6cc4d546e5c8aeafdede749056358b7d639ec7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Requested by Allan Sandfeld Jensen for QWebkit, which needs to register
upfront all the mimetypes that a given plugin can handle.
Change-Id: I64b8d39c7988adfc7db4ed8bfdc73acd16e999da
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
...just like described in http://www.unicode.org/reports/tr35/#Likely_Subtags.
This is much more effective than current "guessing" algorithm
+ makes it possible to instantiate a locale by the script or territory code only.
Change-Id: I674f8476e65b01c56960b6e83a1a346df0715274
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This patch adds some missing codes (two-letter ones only),
removes an outdated ones, and updates some names.
The legacy language codes are handled in QLocalePrivate::codeToLanguage()
(fortunately, there are only 4 of such codes).
Change-Id: Iff50aecd1c762b6399cd151aebb955f341d366c6
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
On the BlackBerry platform, applications run in a sandbox. They are
not allowed to read or write outside of this sandbox. Hence in
QSettings there is no use for the system scope and differentiating
between organization and application. This change will also improve
performance.
Change-Id: I79fee0140595385f3d33bd89fe5daa36b04836bc
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Alan Alpert (RIM) <aalpert@rim.com>
Actually, this broke using QXmlStreamWriter with any codec
where characters in the ASCII range have a different encoding
than the ASCII standard.
This was a regression from 558fe9383ba0aecbec09cc411c0ebab132aac137
Task-number: QTBUG-23310
Change-Id: I75bd013e9d5de53da564a76c2f06e95ff35303a8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
...with a generated one in a way similar to what
http://www.unicode.org/reports/tr35/#Likely_Subtags suggests.
The supplemental/likelySubtags.xml contains all the required data.
This changes some default countries to a most-expected ones.
Change-Id: I920a5623601d8661a943e78197d3bcc838191483
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Checking that the result of sort() is a specific list is wrong,
as sort() can put equivalent elements in an arbitrary order.
Change-Id: Ib06399cdecedb6cf01e721d4d92048449d66b40d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The timeout is in millisecond. So we just need to divide by 1000 to get
the number of seconds
Regression introduced in f587e8f4fd
Reported in the comments of QTBUG-24795
Change-Id: Id16e05e7d04d33605860926f7516d14cdefd6a36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When both freedesktop.org.xml and kde.xml define text/x-qml (*.qml),
the XML provider would look up *.qml, see two mimetypes, and treat that
as a glob conflict, and proceed with contents-based-determination,
which for this sample file, would find "C source" due to the C comment.
Fixed by ignoring duplicate pattern-mimetype associations.
The binary-cache provider doesn't have this problem, update-mime-database
already filters out duplicates when generating the on-disk extension tree.
Change-Id: Ie335b0b419e7413fa0550779709513f68c2bfc68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If you set the duration of any variant or property animation to 0,
its progress will be stuck at 1 (0..1), and its "end" value set on
the target object, after start() has been called. If you change the
direction of the animation to QAbstractAnimation::Backward, you
would expect the progress to be 0 after start. Instead it's still
1; the code seems to assume that if the duration is 0, the
progress must be 1 always.
The fix is that if the duration is 0, the direction is checked to
determine whether progress should be 0 (Backward) or 1 (Forward).
Task-number: QTBUG-27969
Change-Id: Ibeca084bbbce41df1dca7b7d96c15b6b54394996
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Thierry Bastian <thierryb@filewave.com>
Reviewed-by: Magne Zachrisen <mazachri@cisco.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Macros should call QSKIP instead of creating a semi-empty function body.
Change-Id: I389701f618fe9bf0a40aa26f161620389a80e407
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
1. There is a behaviour change for CFDateFormatterGetFormat() between
10.6 and later, QLocale::dateFormat(QLocale::LongFormat) will return
"MMMM d, yyyy" for 10.6 and "MMMM d, y" for 10.7, 10.8
2. Add a comment for toCurrencyString() test, need another system
settings
Task-number: QTBUG-27790
Change-Id: I4fe684d6e0c1d4a140e3b1f1ef395b7fdad030b4
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
As the script dependency for that autotest is not really needed it should
be moved to qtbase.
Task-number: QTBUG-27706
Change-Id: Ieda8b2182a20a77f53a0be9878e82e3236c79c2b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
No reason to keep this test. If an application is trying to allocate too
much memory it will fail, and its the users responsibility to provide
sane values and catch exceptions to recover.
Task-number: QTBUG-27361
Change-Id: I29d71745ab791b6e8a76f7b1f866ff4bd7024749
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As CI runs autotests using the "check" target the approach using
DESTDIR = ../ does not work for the test. Instead the binaries are just
moved one directory up and QFINDTESTDATA is used to find the path of the
helper binary.
Change-Id: If1ed2b60821f1de4ac62f238c8af5e09cf0f444a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Before, the functor slot (or lambda expression) had to have the same amount
of arguments as the signal.
This shown to be a big problem to be able to connect to signals that had
a QPrivateSlot.
This implementation use the type of the operator() of the functor to
know how many arguments we have.
As a bonus, we also can check the arguments in a static assert.
The test comes from https://codereview.qt-project.org/#change,38703
But this patch also works without variadic template
If the compiler does not support decltype, we workaround the lack of it
by using another level of indirection.
Change-Id: I9850b43e8caf77356a2ec3f4c0b0ed532d96029e
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Pointer to const member function have a different signature, and hence
need their own traits code.
Change-Id: Ie4b2434a412f412444fb07ef1388a37cab105ecd
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Add a read position variable to eliminate excessive memcpy'ing when
reading a partial buffer.
Specifically, fix performance issue of reading large files from
QNetworkDiskCache in QtWebKit2.
Task-number: QTBUG-27522
Change-Id: I21edc909bf9223971b2c3db5f1fa6b89c5b61c5f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Antti Harju <antti.harju@ixonos.com>
If ReadFile returns with an error then we must set our internal state
accordingly. QWindowsPipeReader::readSequenceStarted must be set to
false. If ReadFile fails, we're not within a read sequence.
Also, we must handle the ERROR_BROKEN_PIPE error.
Task-number: QTBUG-25342
Change-Id: Ic9247f170fa9cc47fa7e45d0f47ccfedac06a593
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The old code is just plain wrong for negative julian days. Replaced
with plain math from The Calendar FAQ [1], which is correct for all
julian days, provided you use mathematical integer division (round to
negative infinity) rather than c++11 integer division (round to zero).
[1] http://www.tondering.dk/claus/cal/julperiod.php
While the conversion code works for up to around JD +/- (2^63/4), we
only use an int for the year in the API, so this patch limits minJd()
and maxJd() to 1 Jan (2^31) BC and 31 Dec (2^31-1) AD, respectively.
Note that while the new conversion code looks like it would be more
expensive than the old, gcc will in fact be able to optimize it to be
slightly faster (probably because x86 hardware implements round to
negative infinity, and so GCC manages to optimize floordiv to a single
instruction, compared to the three instuctions needed for operator/).
In the following test application, run with a release mode Qt and
redirecting stderr to /dev/null, I measured an improvement from
6.81s +/- 0.08s to 6.26s +/- 0.16s user time over five runs on an
otherwise idle x86_64 system.
int main(int, char *[])
{
int year, month, day;
qint64 jd;
for (qint64 i = Q_INT64_C(-1048576) ; i < Q_INT64_C(1048576); ++i) {
QDate::fromJulianDay(i).getDate(&year, &month, &day);
jd = QDate(year, month, day).toJulianDay();
qDebug() << jd << year << month << day;
}
}
Change-Id: Ifd0dd01f0027f260401f7f9b4f1201d2b7a3b087
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
To avoid leaking when converting a QFuture<T> to a QFuture<void> we need
to have a separate ref. counter for QFuture<T>. When the last QFuture<T>
goes out of scope, we need to clean out the result data.
Task-number: QTBUG-27224
Change-Id: I965a64a11fffbb191ab979cdd030a9aafd4436c2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
As the script dependency for that autotest is not really needed it should
be moved to qtbase.
Task-number: QTBUG-27705
Change-Id: I4ce0d34aca97cadd79b157b0f7c90c406bed4295
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
tst_QMimeDatabase::inheritsPerformance() is not an unit test but a
performance test, so moving it from 'tests/auto/corelib/mimetypes/qmimedatabase'
to 'tests/benchmarks/corelib/mimetypes/qmimedatabase'
Change-Id: I59e84f61559023659f101666683870f2ca1d2034
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Change-Id: Ia9bf8d3c202b17746036e203268ef6229aaa900d
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
hasUnquotedAP currently only checks for an a or A, which is wrong
according to both the toString documentation and the comments for
hasUnquotedAP.
Change-Id: I03015734b846fe761085cf8f8fca2b29210cff97
Reviewed-by: Jon Severinsson <jon@severinsson.net>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
We can insert directly on the most left-most Node.
We always enforce an insert here (unlike the insert call),
but that is not a problem since the keys in a std::map are unique.
Change-Id: Ib409b90ffc57a5a43dab4a4b08d34f6fdabd057f
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Remove QSKIP and instead omit the whole tests when appropriate.
Remove QSKIP from crashTest, crashTest2 and exitStatus on Windows,
the tests are now passing.
Add a guard in testForwarding to check if QT_NO_PROCESS is defined.
Change-Id: Icba4d773315e3bf87764a381742168b51cf169c0
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
The test expects 'fail:invalid' to be an invalid file,
which it no longer is on Windows 7. It also assumes that
f: is an invalid drive. Fix by picking a drive that does not exist.
Task-number: QTBUG-27306
Change-Id: I9d9b36c50fc31d2561d3c4eec66f65d96084f0d7
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
This suggestion keeps track of the most left node.
The point is that constBegin() becomes a lot faster.
That speeds up iteration a bit, and makes it O(1) to get the
first element. The penalty in insert and remove is very small.
On large trees it seems to be less than 1%.
It should be noticed that constBegin() is a very common hint
on my planned change to 5.1, and this opperation will without
this patch cost 2 x log N. One when the user calls the hint
with begin - and one where it is compared with begin.
Other std::maps has a very fast begin(). E.g
http://www.cplusplus.com/reference/stl/map/begin/
(begin with constant time)
Change-Id: I221f6755aa8bd16a5189771c5bc8ae56c8ee0fb4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Instead omit the whole tests when appropriate.
In particular:
- When Q_CC_HPACC is defined the tests fromStdString and toStdString are
crashing. Omit the tests in this configuration since the compiler is not
supported.
- Clean the localeAwareCompare() by removing the code where Q_OS_WIN is
defined but not Q_OS_WINCE. System and user locale cannot be set on
Q_OS_WIN other than Win CE and some code could never be reached.
Change-Id: I72ae3246bf8c2a73d14cce45dde14bcb8001d8b3
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
There are more opportunities in QtCore and the rest of Qt to make signals
private instead of public. This is a test-dart to see if there is any
reason not to do this.
It would be nice to make QObject::destroyed private, but as it has a
default argument it would be source incompatible to anyone connecting
to the SIGNAL(destroyed()) instead of SIGNAL(destroyed(QObject*)).
Currently the function-pointer-based connect syntax does not accept
a functor (or lambda) with a different number of arguments than the
signal. Olivier says a fix for that might come in 5.1, but for now
the qfiledialog2 test is changed to not use that anymore.
Also, the function pointer for a private signal can not be assigned to
a local variable, so the qmetamethod test is changed to not do so
anymore.
Change-Id: Iaf776b822f9ba364f2c184df0c6b23811da56e44
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This allows us to follow test naming convention which should start
with "tst_"
Before:
TestQtJson::initTestCase()
After:
tst_QtJson::initTestCase()
Change-Id: Id83ccc324776399184c3665565eb8d045bfee2e2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
On Fedora 17 /sbin/ is a symlink now, so this test fails there.
Using /usr/ instead.
Change-Id: Ie35902fc093101191bdbf33324e20835d1da1528
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
This is in line with what QTime::addMSecs and QDate::addDays do, for
example.
Change-Id: I902112486727f74f669a97bde6c42028e0838f8d
Reviewed-by: Jon Severinsson <jon@severinsson.net>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Some statements could not be tested, such as default cases of switches
where all possible cases are already handled and some statements where
the system locale is used.
I also removed some statements that would never be reached and hence
will never be able to be covered by tests.
Change-Id: I8ea3071f66d942d986e65708732af6751d36b5e3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Converting the date 1 January 0001 to a string in the format
"dd MMMM yyyy" currently results in the string "01 January 1", but it
should be "01 January 0001".
Task-number: QTBUG-27287
Change-Id: Ia025da7343d1c36aaee34c47c6db551a6e89595f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two lines were commented out but were removed with
Ib6ceb1cb7fb4c6eca672495f96d9cfd907853c85. They have been replaced
as expected fails.
Task-number: QTBUG-22833
Change-Id: Ib154a31bffcdc8e43c6ad236df193e99334652c6
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Normalise all signal/slot signatures in tests/*/corelib,
except in tst_QObject, where they might be test data.
Change-Id: Id4e101f285b1676bb583b0afae06d235e599e24b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The signal is removed from the API; all references to it are removed
from documentation; the unit test that checks for its emission is
modified to listen for QThread::finished() instead.
The QThreadPrivate::terminated flag is also removed, as it served no
purpose other than to trigger the emission of QThread::terminated()
As discussed at http://lists.qt-project.org/pipermail/development/2012-October/007216.html
the signal is not guaranteed to be emitted after every termination,
rendering it useless.
Change-Id: I7b0c45d7889da0d33875545331606f2208ee56fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
remove() can use non-detaching iterators internally before calling
erase(), which hasn't been exploited so far, so that the detach() in
erase() never actually detached. When using erase() from outside,
you can't do it legally without calling begin() or end() that detach()
before erase() is called.
Now remove() doesn't detach anymore, and detaching in erase() works.
With new tests that fail after changing only the erase() callers
and pass again after fixing erase().
Change-Id: I47c0a9e362dce8628ec566f5437d951755de96c8
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Instead omit the whole test when Q_COMPILER_INITIALIZER_LISTS
is not defined.
Change-Id: I34017484a027b95a2677e1c4cb9231fa2aeb5680
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Instead omit the whole test when appropriate.
Change-Id: Iebd569676cc7b2f8fe4a1d272107e092410d397b
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
These containers don't make sense and will just result in no action
being taken (all items added will simply be discarded), but it
shouldn't crash due to a division by zero.
Update the documentation to explain the fact.
Task-number: QTBUG-27339
Change-Id: Ib9acf5c0a9a826e6853e7beaf5e56511fde98dc6
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Ian Walters <ian@walters.id.au>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead omit the whole test when Q_OS_WIN is not defined.
Change-Id: I311538ce839353d4d5e83edfd12c68968fe61215
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
tst_QProcess::echoTest_performance() is not an unit test but a
performance test, so moving it from 'tests/auto/corelib/io/qprocess'
to 'tests/benchmarks/corelib/io/qprocess'
Change-Id: I796788534eafc5ca3b8d86c0ec46998285fd4b8f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Instead omit the whole test when Q_OS_WINCE is defined.
Change-Id: Ifd09048687db95913f39a64cffb42a743af8fa81
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Instead omit the whole test when Q_OS_WINCE is defined.
Change-Id: Ic69accb138121d2b39f068cef181da13b18e46ee
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Instead omit the omit the whole test when Q_OS_WINCE is defined.
Change-Id: I8c0f12c63bbc4567edb3a8626ab060d5ce38f3cd
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Instead omit the whole test when Q_COMPILER_LAMBDA is not defined since
the test is not relevant in that case.
Change-Id: I541da96a881fa0c9be38ae5c0f86df047dd8fc6b
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Instead omit the whole test when Q_OS_WINCE is defined.
Change-Id: Id6f4e65c994115b8bab45f9fbf21dd255d204ea6
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Instead omit the whole test when Q_OS_UNIX is not defined.
Change-Id: If0ee3345c25f6b1baa38845edfd08ec26a45d6f2
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Instead omit the whole test when Q_OS_WINCE is defined.
Change-Id: I356af3ea145012142b3cf2af0b5d813d4be07a25
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Instead omit the whole test when Q_OS_MAC is defined.
Change-Id: I7d35c99ecd69b3c5bb8f8590342edd9665300709
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Instead omit the whole test when Q_OS_WIN is defined since
the test is invalid on this platform.
Change-Id: Idb77df96b0c2a223cddbfffb4e24c6d1f5d33dfb
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Instead omit the whole tests when Q_OS_WINCE is defined.
Change-Id: Idb15d622c9e1dbe4c8ec6a43c34a88e7fef2a384
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Instead omit the whole test when Q_OS_WINCE is defined.
Change-Id: I19e35b837709c92e0202c6a96d113367bc6c92c2
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
This reverts commit daba2c507ad42c66dafa6a29cffa94e9641e0c58,
re-applying commit d9c06bf25210b3d0b31ee6126e57bcb82c292da1, because
the change was accidentally brought back in commit
eae8fb8599.
There's a potential deadlock when a QProcess is created while a
QCoreApplication is instantiated but never executed, or if the main
thread waits() for the child thread.
Task-number: QTBUG-27260
Change-Id: I9e0fdc0341b3063de90979377bac35f2a827b260
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Cursor dependant auto tests are currently skipped in various ways.
Some are checking PlatformQuirks::haveMouseCursor() that tries to
detect if the desktop environment is MeeGo, using obsolete Q_WS_X11.
Some are skipped if QT_NO_CURSOR or Q_OS_WINCE is defined and
some are actually missing the approriate guards.
=> unify by defining QTEST_NO_CURSOR in qtest-config.h when
appropriate ie. for platforms that have no regular mouse cursor
support or when QT_NO_CURSOR is defined.
Task-number: QTBUG-22551
Change-Id: I9a1e0e3156617945ae46226c79268955454c8a9a
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Add BoundaryReason::BreakOpportunity flag that will be returned by the
boundaryReasons() when the boundary finder is at the break opportunity
position that might be not an item boundary.
This is the same as (StartWord || EndWord) in Grapheme and Sentence modes;
in Word and Line modes, BreakOpportunity flag might occur between the words
or in between of Line boundaries (e.g. in conjunction with SoftHyphen flag).
In other words, the text boundaries are always break opportunities, but not vice versa.
StartWord and EndWord flags has been deprecated by new StartOfItem and EndOfItem
flags which are not about the word boundaries only. In line breaking,
StartOfItem and EndOfItem are set for the mandatory breaks only.
Change-Id: I79bf297e2b988f5976f30cff0c8ca616385f6552
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
that will be returned by boundaryReasons() when the boundary finder
is at the line end position (CR, LF, NewLine Function, End of Text, etc.).
The MandatoryBreak flag, if set, means the text should be wrapped at a given position.
Change-Id: I32d4f570935d2e015bfc5f18915396a15f009fde
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
addMSecs() / msecsTo() have always used qint64, and when QDate was changed
to use a 64-bit julian day, QDateTime::addDays() and QDateTime::daysTo() was
changed to use qint64 in order to support the full extended range, but
addSecs() and secsTo() seems to have been forgotten.
Change-Id: I3acc35ee2bcc9f353650eb42f97d428f706b2db6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Version 6.2 of the Unicode Standard is a special release
dedicated to the early publication of the newly encoded Turkish lira sign.
In addition, there are some significant changes to the Unicode algorithms
for text segmentation and line breaking to improve breaking for emoji symbols.
For more details, see http://www.unicode.org/versions/Unicode6.2.0/
Change-Id: I21cfd4f307e41b41a19d36cce87f7a44c2661bc2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The test is useless as we assert if the requested size exceeds
a certain limit. We could, as an alternative,
throw an exception, but in the end it's the caller's responsibility
to ensure that the requested size is a sane value.
Task-number: QTBUG-27285
Change-Id: I738950a6a2b51671a54e4d25c7e4c3ac0d7f63b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Append the Windows executables suffixes from the PATHEXT
environment variable.
The previous code had a bug since the 'break' statement
bailed out of the inner loop only.
Factor search code out into a separate functions, avoiding
repeated invocations of list.constEnd() and variable
assignments in the old code.
Add a static function that is called on Unix and on Windows
for executable names with a suffix.
Call another function applying a candidate list of suffixes
in case an executable name without a suffix is passed.
Lower case the extensions from PATHEXT, streamline code.
Split up the test, add a _data() slot for clarity.
Task-number: QTBUG-27457
Change-Id: I2bf34de52aeadddd3b937ad1e22191c3c850fd26
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
for the case when the boundary finder is assigned to an invalid one.
Change-Id: I5b60984ff3fd99972fcae21895684bd83b012780
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Keep the original QString that triggered the parsing error, instead of
just one QChar. This provides more powerful error messages, like:
Invalid IPv6 address; source was "http://[:::]"; scheme = "http", host = ""
(QUrl cannot keep invalid hostnames)
Invalid port or port number out of range; source was "http://example.com:abc"; scheme = "http", host = "example.com"
(QUrl cannot keep a non-numeric port number)
Invalid path (character '%' not permitted); source was "foo:/path%?"; scheme = "foo", path = "/path%25%1F"
(the tolerant parser runs first, so the faulty component is fixed)
This stores the error state in a special structure which is not
allocated under normal conditions, keeping the memory consumption
down. On 32-bit systems, QUrlPrivate does not increase in size; on
64-bit systems, it grows by 8 bytes.
Change-Id: I93d798d43401dfeb9fca7b6eed7ea758da10136b
Reviewed-by: David Faure <faure@kde.org>
Make both invalid hostname messages start with "Invalid hostname". And
split the empty port error from the invalid port one.
Change-Id: I870d1ed6fb07ec494f553871a37ed167141ffc06
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
That's what we have QUrl::errorString() for. This will become evident
especially now that QUrl::toString() / toEncoded() return empty if
there are errors.
Change-Id: I64a84e9c6ee57c0fc38cc0c58f5286ddc1248d1f
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: David Faure <faure@kde.org>
These two errors can only happen if one calls setPath() explicitly. They
cannot happen for parsed URLs, which is why they are only caught with
isValid(). It's not possible to set the error condition in setPath()
either because they depend on the presence / absence of the authority
and scheme.
Also update all the unit tests that set a path not starting with a slash
and were just "freeloaders" on the previous behaviour.
Change-Id: Ice58cd4589a850452d7573a5b19667bbab2fb43e
Reviewed-by: David Faure <faure@kde.org>
This tests QProcess::setProcessChannelMode().
The tests verifies if testForwarding really forwards
the output of testProcessEcho (spawned by testForwarding).
Change-Id: Ifc4164569256aeaeab0edef42116986272362c01
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
As it was confusing to use the term local file when referring
to a file that was accessible using native APIs and not just
a file that was on a hard disk somewhere already the function
name has been changed.
By renaming it to createNativeFile we keep it consistant with QFileInfo
which has an isNativeFile() function too.
Test also added.
Task-number: QTBUG-3169
Change-Id: I410e7ed28133d68fd312c6c0faf3f7191460d7ce
Reviewed-by: João Abecasis <joao@abecasis.name>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_QWinOverlappedIoNotifier::multipleOperations starts asynchronous
read and write operations on the same named pipe handle.
The received notifications must contain the right byte count and
OVERLAPPED pointer corresponding to the I/O operation.
Change-Id: I6f3fa5cf3ca6d62fcb9bc7073d28611fcfa7d98a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@digia.com>
When doing multiple I/O operations on the same handle, we get notified
for every operations. These must be distinguished by comparing the
pointer to the OVERLAPPED struct.
We now pass the OVERLAPPED pointer via the notified signal and let the
receiver decide if it wants to handle this notification.
Change-Id: I4efe70f39c6ae5282b949f2f4b21f6e7dd3df785
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Replace storage and operator int() return types with unsigned int
if the enum is unsigned.
This fixes a number of exisiting warnings, in particular with
Qt::MouseButton under GCC.
Change-Id: Ia12d36212329aec3e9d62a5fbd38809a6c2b36d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This class belongs to QThreadPool/QRunnable more than to QtConcurrent, so
move to QtCore, where QThreadPool awaits it.
Change-Id: Ibf20288a986593bf779453427c2dae8db1e1423a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
No compatibility header needed. While this wasn't marked as private API,
it wasn't documented, either.
This is a prerequisite for moving QFuture to QtCore.
Change-Id: I8e986e6e2a22fbe5cf08d0600ec39ae9ae993e20
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ICC apparently optimises 0 * anything directly to zero, even when it
should be doing a multiplication to conform to IEEE requirements. GCC in
fast-math mode does the same, but that also makes the rest of the
function unreliable, so we try to turn off fast-math mode if we can.
Task-number: QTBUG-22340
Change-Id: I0e3c5f4927b0a6bcb3189bb156c18843fc4b29b9
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
The entire test is currently skipped while only the last part is
causing problems.
Move the out of memory test code to its own test function and skip
only this function with the appropriate bug number. By allocating too
much memory this test is causing a crash.
Task-number: QTBUG-27361
Task-number: QTBUG-22342
Change-Id: Ia308099b7f12cf2c567b62063a7bbcc6fb38515b
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
According to the repo history the tailFile was introduced with the
S60 port but the functionality it's testing was never implemented.
Task-number: QTBUG-22341
Change-Id: I16e8e43bbd799f05f8b136925cb0add0b918289e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
While the large data block can be written to a file, the test is
also showing instability while reading back the written block.
Adding another expected failure to address this instability.
Task-number: QTBUG-26906
Change-Id: I9704d441cf2bd6d7ef0f9023240ea61bb89561b6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
WinCE does not have setlocale, used SetUserDefaultLCID correspondingly
as it is done in qstring autotest for WEC7.
Change-Id: I7866bf0f365c7c6efbf3b439cdd9a281c6a1b2e0
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
A simple heuristic is used to detect the word beginning and ending by
looking at the word break property value of surrounding characters.
This behaves better than the white-spaces based implementation used before
and makes it possible to tailor the default algorithm for complex scripts.
BIG FAT WARNING: The QCharAttributes buffer now has to have a length
of string length + 1 for the flags at end of text.
Task-Id: QTBUG-6498
Change-Id: I5589b191ffde6a50d2af0c14a00430d3852c67b4
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
The current check is not enough to catch the unstable failure.
Update the test to catch the failure in all cases.
Task-number: QTBUG-26906
Change-Id: I2e37a1f6513df768cd410df7c91a9fd843150e57
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Member variables for lastSeparator, first and lastDotInFileName are now
initialized to -1 (non-existing), where the previous value of zero would
mean a separator/dot at that position and resulted in path() returning
'/', instead of '.'.
Tests were expanded for better coverage of empty state and
default-constructed instances.
Change-Id: Ie27547886b52224d38b5be0b4f920c9927fd440f
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The test is not hanging on Windows anymore.
On Windows, add an expected failure for the failing case.
Task-number: QTBUG-22801
Task-number: QTBUG-27306
Change-Id: Iede95766504f3e8a278a4554a5967ca333aae3bf
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Negation operator ("!") have precedence over bitwise and ("&").
Change-Id: I39e2d99da6eaa4477bbe35a1259f745e05c9841a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I81c378ef6aeeada5e116f1394cc9fc67f901ffd6
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QAIM::createIndex() took either int or quint32, but QMI::internalId()
returned qint64.
In the new interface, createIndex() takes, and internalId() provides,
integers of type quintptr.
This matches the storage size of the void* in the model index and
avoids truncation.
Remove the
createIndex(int, int, quint32) and
\obsolete createIndex(int,int,int)
overloads.
This makes a literal 0 in the third parameter ambiguous now.
The solutions have been noted in changes-5.0.0.
Change-Id: I0a0ecd8430eaf695129a4d09d14d4e30745485c4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This test is crashing. Specify the bug report number in the QSKIP
message.
Task-number: QTBUG-22343
Task-number: QTBUG-27285
Change-Id: I4d4ead4f54944a545103a3d01c5c9d302d7fb1df
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Garbage libs (under elftest) are numbered from 1 to 5 and not from 0 to 4.
Change-Id: Ia0162372bf5cd1fb53a0442543c5a65716880611
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
The Blackberry OS uses a filesystem with the noatime option,
which returns a "wrong" access time.
Change-Id: I04cdb899699e819a36e0917e30d750067b33388d
Reviewed-by: Tobias Koenig
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Changing it outside of the test function definition to avoid running
empty/inapplicable test functions.
Change-Id: I713560cde7f715696984ed082d682900f5f1bcdd
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Caroline Chao <caroline.chao@nokia.com>
QElaspedTimer is a lot more efficient.
Change-Id: I66d9514108f800a45181d8960b01a5e7d3fa9e80
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The test tries to acquire a semaphore that isn't ready, so it will
timeout. The test is working properly.
The only problem is that 10 ms is too strict. For a wide variety of
reasons, especially since the Qt CI system runs multiple tests in
parallel, the program may not run again in that 10 ms window.
Change-Id: Ic0f684895f73646db5f1cc783fe9ef75fb1ab02b
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Fixed so that empty QDateTime is returned for non existing file.
Fixed also created() and lastRead() to return empty QDateTime for
non existing file.
QFileSystemEngine::fillMetaData() returned true for non existing
files. This was also corrected.
Task-number: QTBUG-25811
Change-Id: I523eb99e4405b4b813b2950f85cc646239181d07
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Christian Stromme <christian.stromme@nokia.com>
This test checks the access permissions for '/etc/passwd', however the
filesystem on Blackberry is always read-only
Change-Id: I9299531397d4467287541b04184540ad6e2eae72
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
QArrayData can point to data it does not own (cf. fromRawData()), which
shouldn't be modified. Not even upon destruction, as this data can live
in Read-Only memory or be otherwise shared outside the QArrayData realm.
Change-Id: I8bdf3050a17802fb003b77d5f543fe31769a7710
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andreas Hartmetz <ahartmetz@gmail.com>
This test actually passes on Windows, so removing the QSKIP
Task-number: QTBUG-24543
Change-Id: Ic2666665f2882392aec92a665f51d6c5dd3355f8
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The TRUE and FALSE macros are obsolete and should be replaced with
true and false (all lower case) respectively.
Change-Id: Iee352e8173500683e6319be0abbf5bacf29016e0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This overload avoids the needless heap allocation that the traditional
overload incurs due to the implicit QChar -> QString conversion
involved there.
In order to share the implementation between the two overloads,
QStringList_join now takes the separator as a (Char*,int) tuple
instead of as a QString.
Change-Id: I92961f13a3f19099de2a6e2df9f4789a12fc83a0
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fills the gap left by QWidgetStar, making the sequence
between FirstCoreType and LastCoreType contiguous, which some
benchmarks assume to be true anyway.
Change-Id: I2d5d202b6246a9065fdf77f325a4a04279dbe4b7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test has one unstable failure on Windows, so mark this with QEXPECT_FAIL
Task-number: QTBUG-26906
Change-Id: I2f6c63ddefecacd224d93f83e6951e961a02a051
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Doing element-wise insertions for the full range of the test made
testing under valgrind extremely slow. When a reallocation is detected
we now resize() the container close to capacity(), while verifying this
doesn't unnecessarily re-allocate either.
Change-Id: Idf7015cf390e366fe444e7ca14c904a2d54ff48b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both insert and replace have this overload, so one reason to add it
to append(), too, is consistency. But I can also make good use of
this overload in the the new QStringList::join(QChar) overload, so
it's actually useful in its own right.
Change-Id: Iccd48f9cb84831399e4db7e3e78eba25c0ced30d
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This function only makes sense on a developer build. In non
developer-builds you get:
tst_qtextboundaryfinder.cpp:116:13:
warning: ‘void generateDataFromFile(const QString&)’
defined but not used [-Wunused-function]
Change-Id: Id1bda2d27b00048f7401606959b566a59c05b38d
Reviewed-by: Toby Tomkins <tjtomkins@gmail.com>
If setQObjectShared crashes because a QObject is tracked by two
different QSharedPointers, we lose the debug feature offered by #defining
QT_SHAREDPOINTER_TRACK_POINTERS, as the check done by this define
happens after the setQObjectShared call.
Therefore, move setQObjectShared after the internalSafetyCheckAdd call.
This is actually a noop change in 5.0, as setQObjectShared does nothing.
However it prevents a bug in case the Qt 4 behaviour is brought back
in some later version.
Change-Id: I71340d0f878828354537762d01c46d441efc918c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In Qt 5, when streaming an invalid QDate using a QDataStream version
earlier than Qt_5_0, QDate.jd is written and read as 0, which is an
invalid julian day for Qt versions earlier than 5.0. For Qt 5.0
however, 0 is a valid julian day, so when comparing a deserialised
invalid date (read using a QDataStream version < Qt_5_0) against a
default-constructed invalid date, they won't compare equal when they
should.
Task-number: QTBUG-26989
Change-Id: Ia76df493471f3b068c7d7187be20e3178eff2cc7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This detected the same missing detach()s in QUrl::resolve.
Everything else works, no need for a mutex in Qt5's QUrl.
Change-Id: I0da51b7b0c6b810d314a26d4b638383cd17de12b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Just to make it clear which two sections go together.
Change-Id: If3724d1c84172a61bdd7931cc567f4b7140d4f8a
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
availableMibs() unconditionally adds 2107 to the list of mibs. The patch
ensures that codecForMib() also knows about this special TSCII codec.
(Note that the autotest only really checks this code path if only this
test case is run. The other tests already fill the internal codec cache
otherwise).
Change-Id: Id987d7cecd5f5700cca75e9b85b37011f8e5c622
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
@p replaced by \a, \QD replaced by {Qt Designer}, couple of enums etc.
Change-Id: I315510690bf52e42db519292b4122fa24c73bbc9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
The current implementation of qIsNull only returns true if the value is
positive zero. This behaviour is not useful for use cases like
QPointF::isNull, where QPointF(-0, -0).isNull() will return false.
There doesn't seem to be a reason why the function exhibits this
behaviour (-0.0 is not accounted for in the unit tests), and for the
case of QSizeF::scale it causes a bug: qIsNull is used to check for
division by 0.0 before it proceeds, which fails in the case of -0.0.
Task-number: QTBUG-7303
Change-Id: I767e5280bd26614e8e78ae62b274eb9bc4ade385
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
"The documentation states that "secsTo() does not take into account any
milliseconds", however, this is not the case. Given times 12:30:01.500
and 12:30:02.400 secsTo returns 0. If milliseconds are not taken into
account, I would expect this to return 1 (i.e. interprets the times as
12:30:01 and 12:30:02 thus truncating the milliseconds)."
Note that tests were also written for QDateTime::secsTo(), as it uses
QTime::secsTo internally. This addresses Javier's issue in the
comments of QTBUG-9304.
Task-number: QTBUG-9304
Change-Id: I9efe0c8f710db859c1d086d67ba3e5b349a56c4e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime currently serialises its private Spec enum. If a user was to
deserialise the individual components of a QDateTime separately, the
resulting timeSpec may be invalid when cast to the Qt::TimeSpec enum.
E.g.:
QDateTime dateTime(QDate(2012, 8, 14), QTime(8, 0, 0), Qt::UTC);
// ... serialise
// ... deserialise date, time, spec separately.
// spec == 2, the value of QDateTimePrivate::UTC.
// spec != UTC, will be set to LocalUnknown.
QDateTime deserialised(date, time, spec);
This patch serialises QDateTime objects in UTC and the value of
timeSpec() as opposed to QDateTimePrivate's spec. This changes the
serialisation behaviour of QDateTime for version 13 of QDataStream.
Task-number: QTBUG-4057
Change-Id: If650e7960dca7b6ab44b8233410a6369c41df73a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The asymmetry is intentional: the getters can use toLatin1() because the
called functions, with a QUrl::FullyEncoded parameter, return ASCII
only. This gives a small performance improvement over the need to run
the UTF-8 encoder.
However, the data passed to setters could contain non-ASCII binary data,
in addition to the percent-encoded data. We can't use fromUtf8 because
it's binary and we can't use toPercentEncoded because it already encoded.
Change-Id: I5ecdb49be5af51ac86fd9764eb3a6aa96385f512
Reviewed-by: David Faure <faure@kde.org>
Just in case someone (like me) changes the function signatures or adds
new functions.
Change-Id: I1025fea012d95ffe89acaf799aa58fd2b0babc80
Reviewed-by: David Faure <faure@kde.org>
Those are regular, integer types, of 16- and 32-bit width,
respectively. C++11's std::atomic supports them, so we should too.
C++11 also supports wchar_t, but since that type's size can change, I
don't feel like support for it in Qt is pressing.
Change-Id: I945b641c91a8a98be82715f878c382dee58ac98b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This allows one to write code that depends on these values at
compile-time.
Change-Id: I7d78524ed9c70d4141360496d1d764dcbfa92e62
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows us to remove the odd hacks to get the static metaobject
for the QWidget* metatype.
The QWidget* is still an automatic metatype thanks to the QObject
partial template specialization. It is registered as a metatype
at runtime automatically in qwidgetsvariant.cpp.
Change-Id: Ie01b69eadf2cbe87af1a86c3284550f60dcf9e94
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is necessary whenever QPersistentModelIndexes are changed. Omitting
it means that views are not able to react to the change, such as QTreeView
clearing its (manually held) QModelIndex cache, and the QItemSelectionModel
clearing the item from its storage.
It is necessary to change a QSortFilterProxyModel test which assumed setItem
does not have any such effect. That test is ported to setData instead.
Task-number: QTBUG-18539
Change-Id: Id7a602f18b9773ba4d11019418de886860d26d3e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
qUncompressCorruptedData() no longer hangs on QNX 650 and Blackberry OS
sytems.
Change-Id: Id131f9f1c6dcd358c152675c7e29ab937052c1d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Modeltest asserts before the patch, and passes afterward.
Task-number: QTBUG-26515
Change-Id: I08a89cd5c9c59613badcddbd056a3d0b8fbbca13
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These functions are a faster version of {,!}qgetenv().is{Null,Empty}(),
a common pattern in Qt code.
Their main advantage is that they don't need to allocate memory, so
they can be used in noexcept functions, or dynamic initialisation of
namespace-scope statics, because throwing in these contexts invokes
std::terminate().
Change-Id: I651c5bd72f450b5d7df76590f8791572fe992af5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Library code might need to know this, e.g. when calling an external
process, to give it the right configuration. (For instance when
ksycoca code calls kbuildsycoca to recreate the DB at the right place).
Change-Id: I343ddefff816586f9d391973c08ff1e1ad86bf0e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit f9a17d7f0f fixed it for the case
where the sender object is in a different thread at transition setup
time. However, it still didn't work if either the sender object or the
state machine was moved to a different thread at some later time,
before the machine was started.
Therefore: Bite the sour grape and traverse all the machine's
transitions when the machine is being started, registering those
signal transitions whose sender objects are in other threads.
This will increase the machine's startup time (proportional to the
number of transitions), but at least it works in all known scenarios,
meaning we don't have to document weird restrictions regarding the
order in which the user's operations have to be done.
Task-number: QTBUG-19789
Change-Id: I5f1dd1321994e49635f52be65cf56d2678ed1253
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The SCXML spec states that entry order should be equivalent to
"document order" and exit order should be "reverse document order".
Since QStateMachine uses child order for the entry order, the exit
order should be reverse child order.
Change-Id: Ia7b05fdd5c9261ccf202f64f8d23f5c88b20a8c3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Ensure that the parsing mode is cascaded down from setAuthority and
setUrl so that the hostname parsing does not attempt to decode
percent-encoded hostnames when it shouldn't.
Take the opportunity to also remove the "Boolean Trap" from
QUrlPrivate::setHost.
Change-Id: Ia64754c4a4900182700b7af1382aea8410abc7e9
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The URI RFC defines schemes as containing only a very restricted set
of characters, none of which require encoding, so don't even
try. Testing this behaviour in some web browsers indicate that they do
not accept percent-encoded schemes either.
Change-Id: I692dd20e1aac7e8a1bcb276cb5113b5802393d38
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
If the password is empty (but present), the userinfo component of the
URL should end in a colon (":"). QUrl already supported that and it
was tested (case "password-empty").
If the username is *also* empty but present, the userinfo component is
just the colon (":"). Fix support for that case by checking if we
stored the presence flag instead of checking the size of the
component.
Change-Id: Ie224493a997dbf76b2e44dd6d55fd9674ac83c1c
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QString::fromUtf8, without an explicit size, (currently) defaults to
stopping at the first NUL. That means we need to pass an explicit
size.
Also take the opportunity to test that QUrl::toPercentEncoding also
works with the same data.
Change-Id: I79362d67afda624b01ca07b0315b611c4aa3fdda
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Unloading and reloading a plugin didn't work correctly,
because we didn't reset instance to 0 on unload.
Task-number: QTBUG-26098
Change-Id: Ic3e4497f359b1ca455be949dce9cafa9d67d8039
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use ICU to do code page conversion instead of the
builtin text codecs. With this QTextCodec simply
becomes a wrapper around ICU's ucnv_* methods.
We only keep our own codecs for UTF-*, ISO-8859-1,
ISO-8859-15 for performance reasons, and for TSCII
and iscii-* because they aren't supported by ICU.
Change-Id: I4fc49eba55cf772b9772c6dac606a47a44346a60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is working, but let's just be sure by adding a testcase.
Change-Id: I8c6b5ded0c7b6c90645dbf70a7ce6c1ba447a284
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test was using some QSpinBox instances to generate signals for
testing. Use our own QtTestObject to generate the signals instead.
Change-Id: I3714955ae040d541c3b613a478945c38a18be18d
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This is useful for inserting a string without space-handling, given that
dbg.nospace() followed by dbg.space() inserts a space.
It's also useful for QDebug operators for custom types, so that they
can disable space handling and then restore to whatever it was before
(rather than forcing it to space() mode).
Change-Id: I9d72e9ffbcbc581ed093168752c29af924405b33
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When containing a QObject (or sub-class) pointer and trying to convert
to a QObject pointer canConvert() did dereference the pointer without
checking for it being null.
Change-Id: Ie274e54f2f817f2b6c5df64504f8af6359b8f38d
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This avoids test instabilities and prevents test directories
from being cluttered with temporary files. Change tests
accordingly. Remove unused createLink() method.
Change-Id: I843c28ab81c8a476c71c5211a7479b22d3d9fc93
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This allows to check whether QMetaTypeId2::MetaType exists, and can help
turn run-time into compile-time expressions, even without constexpr support,
or in situations where constexpr can't be used (because you can't overload
on it). This was designed for the QMetaType::registerConversion feature,
but it's much more widely applicable.
Change-Id: Iafa04add04bcb531b3f7fe3e751c7e91ee6a3bc0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Also check the return value of
DefaultValueFactory<QMetaType::Void>::create(), the same way it's
done in testCreateHelper<QMetaType::Void>().
Change-Id: I3e6d7fca4ea74dbe65009f2eb2c64a1b3a370d68
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is a simplified port of KDTools' KDAB_SET_OBJECT_NAME.
It simply assigns the variable name as the objectName of
a QObject, uic-style. It uses a small helper function so
that it works on references as well as pointer variables.
QLabel label;
QLabel *pLabel = new QLabel();
Q_SET_OBJECT_NAME(label);
Q_SET_OBJECT_NAME(pLabel);
Change-Id: I25fec0c90f33249a3ea5d2dd622ab708019fd101
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This makes development on the meta type system easier because only
QtCore must be re-built to run most of the tests. The existing
QGuiVariant test needs to be run before pushing anyway, but not
so frequently.
Change-Id: I1fa66edbd790c957e1a232226847dd550227a477
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The type needs to be large enough that
QVariantIntegrator<T>::CanUseInternalSpace is true.
Change-Id: I311c44bedfebd946e41639975df206c27b6d55ca
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
For consistency with qMetaTypeId, and because we can.
Change-Id: I6882a16ef3c0d84539048c9f2c201c4a2b2ca7ad
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QModelIndex is a build-in type nowadays and doesn't
need to be registered anymore.
Also remove them from the tests.
Change-Id: I47029972651c045c880cee86fb292116a29493d5
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This allows building the QVariant tests without the QtWidgets module.
Change-Id: I7cd7e78a60c7bc7614ec16df1abe1e93e45d4923
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
WinAPI GetTempPath() sometimes returns short names
for C:/Users/<user>/AppData/Local/Temp.
Change-Id: I33f991acc06e652ccd484d36a5a384eb776f8395
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This makes it possible to add API for setting the restore policy
per state, or even per property assignment (QTBUG-17861).
This change is fully source compatible with Qt4.
Change-Id: I53628546b070f6fc84891f86e7ad7bd8ef5ba285
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Back when QStateMachine was changed to inherit QState, this
constructor was conveniently left out because setting the state
machine (root state) to be a parallel state group didn't actually
work. But as of commit d281aa6936,
it does work, so add the missing constructor.
Task-number: QTBUG-15430
Change-Id: I68c599baa0ef1bfc869195140cf5daf645e75b8b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
under extremely rare circumstances this would have actually failed
Change-Id: I4132d0f82e9f924e92e9e96f6d34451c94a67201
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Since Qt's connections are thread-safe, QStateMachine's plumbing
around them should be thread-safe too.
Change-Id: I8ae91c2edc2d32ca4ed4258b71e5da22de30ed91
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
By default, QStateMachine lazily registers signal transitions (i.e.,
connects to the signal) when the transition's source state is
entered. The connections are established in Qt::AutoConnection mode,
which means that if the sender object lives in a different thread,
the signal processing will be queued.
But if a sender object's signal is used in an out-going transition
of the target state of the queued transition, it's possible that a
second signal emission on the sender object's thread will be
"missed" by the state machine; before the machine gets around to
processing the first queued emission (and registering the
transitions of the new state), a sender object on the other thread
could have emitted a new signal.
The solution employed here is to eagerly register any signal
transition whose sender object is on a different thread; that is,
register it regardless of whether the transition's source state is
active.
Conversely, when a machine's transitions are unregistered (i.e.,
because the machine finished), signal transitions with sender
objects on other threads should be left as-is, in case the machine
will be run again.
This doesn't solve the case where the sender object is moved to a
different thread _after_ the transition has been initialized.
Theoretically, we could catch that by installing an event filter
on every sender object and handle the ThreadChange events, but
that would be very expensive, and likely useless in most cases.
So let's just say that that case isn't supported for now.
Task-number: QTBUG-19789
Change-Id: Ibc87bfbf2ed83217ac61ae9401fe4f179ef26c24
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Some of the transition constructors didn't call the maybeRegister()
function, causing the transitions to be ignored if they were created
when the state machine was running and the transition's source state
was active.
Added tests that cover all possible cases.
Change-Id: If1b593b127bd719e3be4e5a2e6949a780c4e97c3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
The originalSignalIndex member was not set if the signature had to be
normalized. This caused the SignalEvent passed to onTransition() to
report a signal index of -1.
Improve the signal transition tests so they check both the event
passed to eventTest() and onTransition().
Change-Id: I5331fd1944d53310b6d11eb2fd8713b80faa53a1
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Use the same trick as used for private signals in the models.
Change-Id: I4235788490cae0e3d554565621d145652dc5b0ca
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The private signals can not be used as function pointers, as
required by the new syntax, so we introduce a parameter which
can only be created privately.
Change-Id: I3d7bb8a163e764d685e8007cba831fb77e3c6855
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Type traits can not be changed durring Qt5 life time.
Change-Id: If69f65ff2113c901580afee91b11ae1b11c13a4f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Replace a list of QFuture<void>s and a loop that calls waitForFinished()
on each of them with a QFutureSynchronizer<void>, which does exactly that.
Change-Id: I1f2e90169a5b2949bd8cb9d1009a5a7af1500139
Reviewed-by: David Faure <faure@kde.org>
The SCXML spec had a bug that would cause the initial state of a
compound state within a parallel state group to be entered even if
the transition specified another (non-initial) state of the compound
state as its target. This only happened if the transition had
multiple target states.
The bug has been fixed in recent revisions of the SCXML spec. This
commit implements the fix, which is to walk the ancestors of the
transition's target states only after all the target states
themselves have been added, so that the default initial states are
correctly overridden/ignored.
Task-number: QTBUG-25958
Change-Id: Iac532047678c483a4a3996e24dacf30e00f6bbe0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Remember to register the metatype where we use it, so we don't depend
on another test being run previously.
And skip the setWorkingDirectory test completely on Unix. I don't know
why it needs to be skipped, but if we're not going to verify anything,
don't even try to do anything. This saves us one memory leak at least.
Change-Id: I22e151cc3fa7b4e976972aca8978b88b263d9bee
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is accomplished by introducing dependencies to catalogs.
This requires one API change:
QTranslator::load(const uchar *, int);
changes to
QTranslator::load(const uchar*, int len,
const QString &directory = QString());
Since now, even the load from memory might need a directory if
the memory block contains a qm file with dependencies.
Change-Id: I781f333d07f53bb431d0a7b5fa1abe282dc4d338
Task-number: QTBUG-26138
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
As requested by Winfried Schenke:
"QPoint should have an unary operator+ (the unary operator- exists).
Classes with arithmetic operators should provide a complete set of
operators, because some template code relies on it."
Task-number: QTBUG-22913
Change-Id: Ib0c5105975f56c15f00bb48d83c8d911f5a204ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Change-Id: I19d3b2e9a5180b13deb828b55195404ef20be295
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Improve test coverage for QPoint and QPointF.
Separate QPointF tests into their own project.
Change-Id: Id28dc5b85aba9fc179d87b2bca1d99854f27a5ab
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QStateMachine inherits from QState, so it should be possible to set
its childMode to ParallelStates, and it should behave as expected
(the machine should emit the finished() signal when all its child
states are in final states).
Task-number: QTBUG-22931
Change-Id: Ic436351be0be69e3b01ae9984561132cd9839fa7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
It's legal to set a QFinalState as the initial state. The state
machine should correctly emit the finished() signal upon entering
such a state in the initial transition, and don't do any further
processing.
Change-Id: Ica8d3fadbbde604512ea1136624af54eb3b13b11
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
In the old implementation, property assignments
(QState::assignProperty()) were "second-class citizens".
Assignments were not really integrated into the state machine
algorithm, but rather done as a separate step
(QStateMachinePrivate::applyProperties()). While that was
convenient for SCXML spec transcription purposes, it resulted
in some pretty poor semantics on the user side:
* Properties were not assigned until _after_ both the
QAbstractState::onEntry() function had been called and the
QState::entered() signal had been emitted.
* Automatic property restoration (QStateMachine::RestoreProperties)
did not play nice with nested states (and parallel states, in
particular).
The proper fix is to refactor the implementation to make
property assignments first-class in the core state machine
algorithm (QStateMachinePrivate::microstep()).
In practice, this meant splitting some steps. Instead of calling
exitStates() straight away, we now first only compute the states
to exit (without actually exiting them), and use the resulting set
to compute which properties are candidates for restoration.
Similarly, instead of calling enterStates(), we first only compute
the states to enter (without actually entering them), and use the
resulting set to compute which properties are assigned by the
entered states.
With that in place, the rest was a matter of moving the various
chunks of the old applyProperties() logic to the place where they
belong in the per-state entry/exit.
All existing autotests pass. Added several tests that verify the
desired semantics in more detail.
Task-number: QTBUG-20362
Change-Id: I7d8c7253b66cae87bb0d09aa504303218e230c65
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This test used requires(contains(QT_CONFIG,private_tests)) in its
.pro file, but did not subtract itself from its parent project
SUBDIRS when private_tests weren't enabled.
Change-Id: Idcd0893c4804a8217e4dd33ba9838ff67e996f58
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the transition has no target states, that means the current state
won't change; hence, property assignments should not be performed.
In particular, properties should not be restored to the values they
had before the state was entered.
Change-Id: I237bbb541f939c272777e70c5f26c886ec457a17
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Previously, a registered restorable property would only be
unregistered if the property was animated (see
QStateMachinePrivate::_q_animationFinished()).
But if a property is set directly, it should also be unregistered;
otherwise, the state machine would use the previously saved (stale)
value the next time that property should be restored.
Change-Id: I5d246aa5355ddd0ba5f81b0186a9f0e4f3bbaa3f
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Do like QPropertyAnimation and store the QObject in a QPointer.
Purge the assignments list upon state entry and property restore.
Change-Id: I54a56885a2905178ab6aa5cf292b3d25c86b7a97
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
In qdbus_cast(), qMetaTypeId<QDBusArgument> as well as
qvariant_cast<QDBusArgument> are used. They don't depend
on any template argument of qdbus_cast(), so their
definitions need to be available at function template
definition instead of instantiation time.
But the necessary Q_DECLARE_METATYPE(QDBusArgument)
was at the end of the header, after the defintion of
qdbus_cast(), which is too late for conformin compilers.
Fixed by moving it up just after the QDBusArgument
definition.
Similarly, in tst_qdatetime and tst_qvector, the
Q_DECLARE_METATYPE() for Qt::DateFormat and QVector<int>,
and with it the specialisation of QMetaTypeId<>, were
issued after the first use of meta typing; too late for
conforming compilers.
Change-Id: I25ca0b06e68d5184597a22708404a8f2040b2de1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The name is the unique identifier. Code such as
if (oldItem.mimeType() == newItem.mimeType())
really wants to detect whether the item has a new mimetype (name),
not compare static mimetype data such as comments and icons.
Change-Id: I5fe56443295c91e1024c066ad6e7f93d842ae507
Reviewed-by: Wolf-Michael Bolle <wolf-michael.bolle@nokia.com>
Add more test data, merging operator!= tests in with operator==
to take advantage of added data.
Change-Id: If0426a3d01b8800cb7363385dbf3bcb21af5ed8f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that Q_PROPERTY with a QObject derived type is more powerful.
This property can be used in QML so that wrappers for proxy models
do not need to be created, such as in the example
at https://codereview.qt-project.org/#change,13007
Change-Id: I6ba676549d2135585d429a28e214fef0b2a6b1f9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Make test projects declare TEST_HELPER_INSTALLS rather than calling a
function exported by testcase.prf. load(testcase) may be unsafe, as
testcase.prf should be processed after default_post.prf.
Fixes silent disabling of various autotests.
Change-Id: I56b35ffd653a637ad5ab18d64dd1a1edadfac59f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Just like for the QChar::ByteOrderMark, `ch == QChar::SoftHyphen`
is much more readable than `ch == 0x00ad // (soft-hyphen)`, etc.
Change-Id: I9c85f14cfd979037d35103c3259a435fd729b869
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This will make it possible (in Qt 6) to remove the enums listing
metatype ids. As it is constexpr, it can be used in switch statements
just like enums, as enum values, and as template specialization values.
Change-Id: I51293674c403714e34cb8a8b8953522fc97a740a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
canConvert() and convert() use the metaobject to convert such types.
Change-Id: Ic05e74c5c2423b4b9682b88adc856a16dcba4cff
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This will allow conversion between pointers to compatible QObject
derived types.
Change-Id: I19e08934571fb3f1b91e594892214041fe5f6a11
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The dependencies on QFont, QBrush, QIcon are all in QtGui, so there's
little sense to still have these classes in QtWidgets.
This also copies and pastes a version of QWidgetItemData as
QStandardItemData inside qstandarditemmodel_p.h.
Change-Id: Ibafc5a30748e7ce0b54753309ae6dc4a797fc20e
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Store the signal index in QObjectPrivate::Connection, thereby making
it available in "implicit" disconnect contexts (i.e., receiver
deletion).
This change does not cause the size of QObjectPrivate::Connection
to grow (still 40 bytes on 32-bit Linux, 72 bytes on 64-bit Mac).
Valgrinding the new benchmark indicates that the percentage of the
time spent in the QObject destructor increased from 7.8% to 8.4%
on ia32, for that particular stress test; the increase is the
combined cost of calling metaObject(), QMetaObjectPrivate::signal(),
and disconnectNotify() for one connection. In practice, the measured
wallclock time increased by about 3ms for a 500ms run (which
repeatedly constructs, connects, and destroys an object).
Task-number: QTBUG-4844
Change-Id: I1beb01c753f31542fc0acb62edb4c6d165fcc5b4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
When opening a QFile on stdout, for example,
we must not call seek as it is a sequential device.
This has been flagged as a warning since commit Ie3a96d3a
and has resulted in spurious warnings being emitted.
In the case of opening a QFile in Append mode, QIODevice::open
already sets the position marker, so calling seek is redundant.
This is also true for the file engine's open function (called
through openExternalFile()), which also ensures the handle or
descriptor is repositioned appropriately.
Task-number: QTBUG-26104
Change-Id: I71040c399efe54e7538f54433368b432e959e08d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Updated removeGroupSeparators(QLocalePrivate::CharBuff *num) so that it
removes also positive sign ('+') at the start of the string. Auto test
included.
Task-number: QTBUG-26035
Change-Id: I8e0e071d6c682d9192a8c6bb2f282510e21b3c48
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
QVector::erase shouldn't try to make sense of iterators it doesn't own,
so the validation being done here is bogus and dangerous. Instead, it's
preferrable to assert, the user needs to ensure proper ownership.
The case of erasing an empty sequence is not checked for preconditions
to allow
QVector v;
v.erase(v.begin(), v.end());
, while being stricter on other uses.
Autotests were using ill-formed calls to the single argument erase()
function on an empty vector and were fixed. This function erases exactly
one element, the one pointed to by abegin and require the element exist
and be valid.
Change-Id: I5f1a6d0d8da072eae0c73a3012620c4ce1065cf0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes things easier for developers touching QtCore and running
all QtCore unit tests.
Change-Id: I7aa832a6a1be07d90cacad2eecb2364285ff3818
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This allows QVariant/QMetaType software (such as QtDeclarative) to
deal with smart pointers in a similar way to how they can deal with
naked pointers (accessing properties etc).
This also adds a requirement that T be fully defined when
QSharedPointer<T> is inserted into a QVariant.
Change-Id: I29e12b8a6aa5f4aadbd62f92b89bc238f64b5725
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
