Remove SRCDIR defines from tests that don't use them. There is a
standard define called QT_TESTCASE_SOURCEDIR that is available to all
tests and serves the same purpose.
Pick-to: 6.2
Change-Id: I2aa237739c011495e31641cca525dc0eeef3c870
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Helped quite a lot with OpenSSL 3 not accepting some old algorithms.
Pick-to: 6.2 6.1 5.15
Task-number: QTBUG-95123
Change-Id: If4894fa86eba7b002465fa661d436ae6ea751989
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- avoid calls to private and virtual functions, if the device is not
open;
- avoid repetitive checks in loops;
- add missing checks in readLine() overloads;
- remove check against unsuccessful resize().
Change-Id: I973d5931163b25db1c09c7c3b66f29ea90bb1b29
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
The server's socket may not have been created yet, so use the server's signal
instead.
Switch to QCOMPARE to get better output.
Delete the extra checking for schannel, we don't support Windows 8 anymore.
Pick-to: 6.2
Change-Id: Icd310c32939cb577c9f3438789f667aa0a3a4d85
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For flush() it's not clear what they wanted to test.
isEncrypted() is tested indirectly in many of the other tests.
Change-Id: Id6dfecbb25b7bba8f1a99518fd9c9e06280aaa9f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It needs to be checked at runtime to know if the current backend
supports it
Pick-to: 6.2
Change-Id: I0998309149b109e2075a008b2b8d8115fa3688cc
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As per the best practice laid forth in RFC-8996.
TLS 1.2 was recommended from 2008 until TLS 1.3 was released in 2018.
[ChangeLog][QtNetwork][QSslSocket] TLS 1.0, 1.1 and DTLS 1.0 are now
deprecated, as recommended by RFC-8996.
Fixes: QTBUG-92880
Change-Id: I90cebcfb07cfce623af7ac9f2b66ce9d02586b54
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Since we're no longer connected, much less encrypted.
Was done in schannel backend, but not in ST or OpenSSL
Pick-to: 6.2
Change-Id: Ia49387be0088f899a0c89091f7e468dba1c0eee6
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
For auto-tests that were temporarily disabled. Similar to
network-settings.h, header-only stuff.
Fixes: QTBUG-92866
Fixes: QTBUG-92877
Change-Id: I15b5c0b41f0d8bfe59b09c844884ff6d99e6d41a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It's possible that Qt is built with OpenSSL and some other backend.
The ifdefs generated are not mutually exclusive anymore, as it was
in the past. So tests should rely on the actual backend they have
working at runtime.
In the process of fixing the auto-tests, modernized feature #if-ery and
some associated compilation issues.
Fixes: QTBUG-92875
Change-Id: I2be1b924d506fd36dc4e2c6c9158b5023ff87f32
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
All TLS (and non-TLS) backends that QSsl classes rely
on are now in plugins/tls (as openssl, securetransport,
schannel and certonly plugins).
For now, I have to disable some tests that were using OpenSSL
calls - this to be refactored/re-thought. These include:
qsslsocket auto-test (test-case where we work with private keys),
qsslkey auto-test (similar to qsslsocket - test-case working with
keys using OpenSSL calls).
qasn1element moved to plugins too, so its auto-test have to
be re-thought.
Since now we can have more than one working TLS-backend on a given
platform, the presence of OpenSSL also means I force this backend
as active before running tests, to make sure features implemented
only in OpenSSL-backend are tested.
OCSP auto test is disabled for now, since it heavily relies on
OpenSSL symbols (to be refactored).
[ChangeLog][QtNetwork][QSslSocket] QSslSocket by default prefers 'openssl' backend
if it is available.
[ChangeLog][QtNetwork][QSslSocket] TLS-backends are not mutually exclusive anymore,
depending on a platform, more than one TLS backend can be built. E.g., configuring
Qt with -openssl does not prevent SecureTransport or Schannel plugin from being
built.
Fixes: QTBUG-91928
Change-Id: I4c05e32f10179066bee3a518bdfdd6c4b15320c3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
All backend-specific code is now separated and removed
from QSslSocket(Private) code. The original code is mostly
preserved to avoid (as much as possible) regressions (and
to simplify code-review).
Fixes: QTBUG-91173
Task-number: QTBUG-65922
Change-Id: I3ac4ba35d952162c8d6dc62d747cbd62dca0ef78
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
(cherry picked from commit 9391ba55149336c395b866b24dc9b844334d50da)
QTlsBackend is a factory itself - it creates TLS/X509 objects. Having
an intermediary between Factory->Backend->TLS primitive does not look
very natural thus let's squash the first two parts. Backend is a factory
creating TLS primitives, but its static functions also provide information
about backends availablei and give access to those backends.
Fixes: QTBUG-90606
Task-number: QTBUG-65922
Change-Id: I8409d81fd11fb46e6ab4465b4937a7680a8c2447
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is an abstraction for TLS backend and its factory, preparing to transition
to plugin-based design.
Task-number: QTBUG-65922
Change-Id: Ibe810e77fd1b715a6bea66cd3f44312b015ac274
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This API gives the names of available backends and provides a basic
information about features/protocols supported by those backends.
Also, it has the 'loadBackend' functions which allow to select
a particular backend (which are becoming plugins).
At the moment, the implementation is still 'hardcoded', the
follow-up patch will allow to select different backends in runtime.
Task-number: QTBUG-65922
Change-Id: I05877de9c02857594e76b24d52e7578bdb01df69
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
SecureTransport does not allow deprecated digest algorithms, and
(depending on ST version) it may or may not accept our server's
certificate.
Funnily enough, they 'fluctuate' between versions again and again.
Fixes: QTBUG-89922
Change-Id: Ie5fbfca316806bd5000ce2d128b81b718bb36624
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QSslCertificate::verify() has an undocumented and not very desirable property -
on some platorms it updates the default configuration, which can be surprising.
For example, we deprecated QSslSocket::setDefaultCaCertificates() and recommend
using QSslConfiguration::defaultConfiguration(), QSslConfiguration::setDefaultConfiguration(),
and QSslConfiguration::setCaCertificates(). If an application does this to select
CA roots it trusts explicitly, and then for some reason is calling verify, the
application can have its QSslSockets successfully connecting to a host, whose
root was not trusted by the application. Also, on Windows, defaultCaCertificates()
include system roots already, no need to have them twice.
[ChangeLog][QtCore][QtNetwork] QSslSocket::verify - do not change the default configuration
Pick-to: 5.15
Pick-to: 6.0
Pick-to: 6.0.0
Fixes: QTBUG-88639
Change-Id: I1cd40b259d0a6dcd15c78d1e7c027ff10859595c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
By adding auto-tests that were missing/not triggering the paths found
by LCOV.
Pick-to: 5.15
Pick-to: 6.0
Change-Id: I472f59e8e7292786c80d7c8dcebde53a2982e1ec
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
tst_qsslcipher was quite useless - now we test that default constructed
QSslCipher reports expected values. Test the non-default from the
different auto-test, where we are sure we have really useful
ciphersuites (with different parameters obtained from a TLS backend,
where it's possible).
Pick-to: 6.0
Pick-to: 5.15
Change-Id: Iff14a0580fed889cf9e0873bee01d968773626db
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Interesting, it only exploded now - initially we were too fast (faster than
500 ms) so never noticed. Now that more tests with the similar event loop
handling were introduced, the last one was catching a single-shot timer
signal, accessing long dead object).
Fixes: QTBUG-87612
Change-Id: I52446fa7b08ef90a4742af3662da7837a8602941
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It's not possible to connect to microsoft.com with Schannel TLS 1.3 for
some reason (also tested with Internet Explorer), but other sites work
fine. Must be something they have to iron out for later.
In my experience this needs a preview release of Windows. One of my
machines is opted into the dev channel of Windows where they enabled TLS
1.3 by default, and it works well in my tests except for the part above.
On my other machine, after enabling TLS 1.3 through the registry, I fail
to complete the handshake with any site. So around March/April next year
is when this code would activate for most people.
MinGW apparently defines NTDDI_VERSION as the one for Windows Server
2003, so it currently doesn't build the new TLS 1.3 code. In Qt (as a
project) we could consider setting this higher, but that's out of scope
for this patch!
Fixes: QTBUG-81294
Change-Id: If329959c3a30ecbfbb8c0d335cc39ccb6d012890
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qt_add_test supports now QT_TEST_SERVER_LIST, which will add the test
servers as docker test fixtures.
The docker server will be started before the test is run, and stopped
after the test is run.
Running the tests in parallel is not supported.
Docker tests are currently only supported on Linux hosts.
Task-number: QTBUG-85034
Change-Id: If3cefe05c5dec19c14b05d2fa8b01a0b6d95e259
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Certain servers, like smtp.live.com, will send a request for a
certificate even though they don't require one. In Schannel this
manifests as a warning/info status (SEC_I_INCOMPLETE_CREDENTIALS).
In the cases where it's not needed we should suppress the warning and
try to connect anyway, which is done by calling
InitializeSecurityContext again when we get the status.
Pick-to: 5.15
Change-Id: I3c48140f2949d8557251a49a2b66946da9395736
Reviewed-by: Joshua GPBeta <studiocghibli@gmail.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
CentOS it seems not only backported some OpenSSL 3 functions,
but also raised the default security level to 2, making some of
our keys (and MDs?) 'too weak' and failing auto-tests here and
there as a result. For our auto-test we lower the level to 1,
as it is expected to be.
Fixes: QTBUG-86336
Pick-to: 5.15
Change-Id: I7062a1b292e8b60eb9c2b2e82bd002f09f9da603
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
And put a note about it in the documentation
Change-Id: I29126e4a80f83c256190e03b8fe01f3c869fd46d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We had such an overloaded version in QSslSocket, it was deprecated without
providing any alternative. Now this function has some use and may be
introduced in Qt6, as QSslConfiguration::setCiphers(const QString &).
Last but not the least - a useless and strange auto-test was removed
(it was creating a list of 5 QSslCiphers each with isNull() == true).
That's becasue '!MD5' or 'ALL' (for example) is not a cipher to be found
in supportedCiphers.
Change-Id: I47eb4c0faa9b52885e883751dd992cd9cb3d26fe
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Not to pollute the global namespace with rather generic names
(especially in case QT_NAMESPACE is none); also drop the
(now)redundant 'Q' prefix in the names.
Change-Id: I57ea7e3996cced705f7ddbdbc1e0231191b31c43
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Whoever wrote this test, was a PROPER hacker: trying to force a TLS implementation
not to properly compress some data, they generated a sequence of bytes in a very fancy manner,
something like 255 0 0 0 255 0 0 0 123 0 0 0 255 0 0 0 - yeah, it's really a random sequence
of bytes, surely, it's impossible to compress! Meh.
Pick-to: 5.15
Change-Id: Ia10ae18a40b5b8f006c45147b06fe5be6efcb129
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We deprecated several setters on QSslSocket, no need to test
them then (and I'm removing them in Qt 6 anyway, so changing
the test is the phase 1).
Pick-to: 5.15
Change-Id: I5807abfb280cbacd4fcc19468793f9d1f3b2ff20
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Use 'errorOccurred' instead of 'error' and 'sslHandshakeErrors'
instead of 'sslErrors'.
Fixes: QTBUG-82605
Change-Id: I19d4845b16c7b636af7b0658d4fbbba4eef9d029
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We end up with an absurd situation:
QSslConfiguration conf;
//we set CA certs so that on demand loading is disabled:
conf.setCaCertificates({...});
QSslSocket s;
s.setSslConfiguration(conf);
Q_ASSERT(conf == s.sslConfiguration); // this assert fails.
Pick-to: 5.15
Change-Id: I272bed145434082acc6ead95fe3640d222b21131
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the signal) is deprecated; superseded by errorOccurred()
Change-Id: I11e9c774d7c6096d1e9b37c451cf0b99188b6aad
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This reverts commit 94b3dd77f2.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I0dd60cf1ae9d1bd95beeb8ad58661ca4b1fb63b9
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
