Brings down gui/painting/qcolor from 7s to 3s, reducing the calls
to printf() helpers from 16E6 to 10E6.
Task-number: QTBUG-38890
Change-Id: I34065e6f09fc9a14920b06aa6936908229f3f9c4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
QAbstractSocketPrivate::readFromSocket() had a qDebug() that
references its q->... so it also needs its Q_Q() declaration.
Only relevant when QABSTRACTSOCKET_DEBUG is enabled (which it
normally isn't).
Change-Id: Ib82fd032fb2c4143a0987b9162377d0d7e968e95
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since QSet<>::intersect() modifies the original
set, exitSetT1 has wrong content for next iterations.
Use intersects() instead.
Change-Id: I09e0961ec6dfb34ade88d48d1e009529aeab82b4
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
1. _HAS_DINKUM_CLIB is defined whenever a C header is included, even when
Dinkum is disabled.
2. _HAS_* macros are always defined, as either 0 or 1.
Change-Id: I727b854a6a733e2028e6facc327e264d0c4c9e90
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a follow-up for 5c1b9bbdf1 disable the
test on all platforms, since it fails on newer openssl. This was now
also happening on Windows, so until a fix is there, skip the test.
Change-Id: I6c8822c0ac5411b1114e9cd426219574ab1c9b54
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Somehow qmake doesn't add the correct rules for the Android makefiles,
so the build fails when cross-compiling from Windows. The reason for
that is unknown (could be related to that "qt_android_deps" config, but
that isn't used anywhere in qmake or the buildsystem).
This isn't likely to be a problem, since there are no global installs of
Qt on Android.
Change-Id: I1d0f78915b5942aab07cffff140f95ce32324030
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QGuiApplicationPrivate object is already destroyed by the time
the plugins are cleaned up during the application destruction, causing
a segmentation fault in updateInputDeviceCount().
There's no point in calling updateInputDeviceCount() in the destructor
anyway as the whole process is on its way out that stage, and we
don't support unloading plugins during the application lifetime
otherwise, so the call can just be removed from the destructor.
Change-Id: Id819d73cb8234ccedb6ea7c3e39950589ee680a1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
The Windows code was always returning AnyScript, which in turn made
QLocale::textDirection() for the default and system locales always
return LTR, even if the Windows UI was in RTL mode.
[ChangeLog][QtCore][QLocale] Fixed a bug that caused
QLocale::textDirection() to always return Qt::LeftToRight and
QLocale::script() to return QLocale::AnyScript on for the Windows system
locale.
Task-number: QTBUG-49031
Change-Id: I7e6338336dd6468ead24ffff14112c8d348eedba
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As we cannot style the navigation elements freely with the restricted
version of CSS that QTextBrowser supports, we need to inject
separator elements between the prev/next page links.
This change adds a 'bullet' character wrapped in a <span> as a
separator. A rule is added to the standard offline CSS to hide the
separator as it's not needed there.
Change-Id: I13220a2a60e2d3063f94bc7dff0e4320d0bed4f6
Reviewed-by: Martin Smith <martin.smith@digia.com>
Commit 4bb004de94 broke the linker
options in generated Visual Studio projects.
We need to call fixLibFlags on QMAKE_LIBS and QMAKE_LIBS_PRIVATE.
Task-number: QTBUG-48936
Change-Id: I2f12bf0117d27104cd34f2f43fdeb7b948fa375e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The latter is much faster as it doesn't have to deal with
time zones.
This change is safe, because the QDateTimes are only used for
comparison with other QDateTimes, which, from a quick glance around,
seem to be mostly, if not exclusively, in UTC. Comparsions work
across time zones, but the comparison between UTC date-times is
fastest.
Credits to Milian Wolff, from whose QtWS15 talk this advice is
taken.
Change-Id: I6859d886d8dc8e0a52fbe394fbb7b93a87b4739a
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Skip the correct number of bytes in the read buffer when expanding '\n'
into "\r\n" upon writing.
Change-Id: I5b01fc47c330dee5c83001abf0acd7d63d790b96
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use indexOf() to match individual characters, which is a lot faster than
QRegExp. As a side effect, don't try to expand what we just inserted.
Change-Id: I964fbd92055f2f2649e7d8ed5739cf1fc7cae927
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/2cc17a61eb6d0fee80fd388fcc5be03a59e4f2b5)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Qt 5.3 is the minimum requirement these days. Remove all fallback code
from sources and project files.
Change-Id: If6188a471197acadda4d6baee71804ba1a8026c6
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
(cherry picked from qtcreator/847f10e9ccc8c3541782a790e04c85c6b4c701da)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Less typing and less cycles than join(QString) where appropriate
Change-Id: I6ebc0e17e4d7fd9845864dd95b7de4ba4dad6906
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
(cherry picked from qtcreator/6431ab2c799553623ec3fe6a79f1e85484558dd6)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this fixes an assertion failure with qt4 mingw specs when PATH contains
a "." element.
Task-number: QTCREATORBUG-12528
Change-Id: I2b6b7e02cf38881d40bd78bb0d705f7d58d0736c
Reviewed-by: Christian Kandeler <christian.kandeler@digia.com>
(cherry picked from qtcreator/d0428a05220ed0550dd84cdb8299a1fb37b0fe72)
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
assigning a relative path to QMAKESPEC or QMAKESPEC_ORIGINAL (in the qt4
windows legacy code) would lead to an assert further down the line.
just ignore such attempts silently.
Task-number: QTCREATORBUG-8477
Change-Id: Ie53d0ef004c743284b85de4e89f112e0161ff4b7
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/e017a1dc8b2030e509d6198315e9f6a9869667e7)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
just syncing up with qtcreator.
Change-Id: I2bda6961f6f1164bdc58acd78fa3d2221977f0cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qtcreator/765ad6c3d28813d4baa0aeafd03076ba76557d3d)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it could be only triggered by abusing the function (no expansion
actually done), and nobody is using this to start with, but still ...
Change-Id: I3d4a23ae4d1eea07955572d8213094e0dc218f6d
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/cdc2a0f72334268684e0407e9b04b3188e00d4bf)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This prevents an access to free'd memory when opening qtcreator.pro.
Looks like qml2puppet.pro gets added to that cache in QMakeVfs::writeFile
with part of the including pro-file's filename in it. That part gets
cleaned when that containing ProFile goes out of scope, leaving a key in
QMakeVfs::m_files free'd but accessible.
Change-Id: I80b43d2fbb66c214647497ea97e6e3a587e274d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qtcreator/336c3159617cdb3edd35021b5fb312d4d43f9a84)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QProcessEnvironment caches keys, so we must not pass it QStrings created with
fromRawData()
Task-number: QTCREATORBUG-9142
Change-Id: I29fade02f3bc4110fafb1b04d44f2e653951a2ae
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qtcreator/99f15f1706868c4b2f84bc4164451bd69b3b8188)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
we execute foreach loops now. this is (mostly) safe nowadays, because
a previous change added precautions against exponential value list
growth, so it's unlikely that two nested loops would keep the cpu busy
for a day as before.
we continue to exclude forever loops and loops with excessive integer
counts.
Task-number: QTBUG-8550
Change-Id: Iaa116086986cc7fd5023834753f791dd205102e5
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qttools/dd4d594c787a62fa8aa12695c5d115c71b59bacd)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
ProFileCacheManager::discardFile(s) may remove an entry from
the ProfileCache only when it is unused (which is the case iff
ent->locker is zero).
Change-Id: I9df2079087af6bd0d35dd121db6222e8a6ec9389
Task-number: QTCREATORBUG-14730
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
(cherry picked from qtcreator/dedcd25924743e494055c1e0195aeef0f3983a1d)
(cherry picked from qtcreator/b335b2a083e456e2b44b1e9454a0f4cd41e2a397)
(cherry picked from qtcreator/a027cbcd7051c634a51b6029dcb8a5b4bfe8b046)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Enclose all debug operators within QT_NO_DEBUG_STREAM, declare
all public ones and make the others static. Add operators for
POINT and WINDOWPLACEMENT.
Task-number: QTBUG-48449
Change-Id: I33f2dba2bf486a8f5cb11f11f4e2b37cce086def
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This may result in incrementing an invalid iterator after the
iterator's container has changed. Also, for this to happen,
the view needs to have an active editor.
The reentrant call happens as follows in QTreeView, after the
model adds new rows to the view:
QTreeView::rowsInserted()
QAbstractItemView::rowsInserted()
QAbstractItemView::updateEditorGeometries()
QTreeView::visualRect()
QAbstractItemViewPrivate::executePostedLayout()
QTreeView::doItemsLayout()
QAbstractItemView::doItemsLayout()
QTreeView::updateGeometries()
QAbstractItemView::updateGeometries()
QAbstractItemView::updateEditorGeometries()
Other concrete item view classes may be prone to the same issue.
The fix consists in relayouting the items if needed, which should
trigger calling updateEditorGeometries() again. This doesn't
invalidate previous optimizations regarding item relayouting since
we only force relayouting when it'll be done by visualRect().
Change-Id: Id31507fdc8d9a84d50265298191d690d1a06792b
Task-number: QTBUG-48968
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The printf-style version of QDebug expands to a lot less code than the
std::ostream-style version. Of course, you pay in type safety (but
compilers warn about it these days), you cannot stream complex Qt
types and streaming QStrings is awkward, but in many cases you
actually improve on readability.
But the main reason is that something that's not supposed to be
executed under normal operation has no business bloating executable
code size.
This is not an attempt at converting all qWarnings() to printf-style,
only the low-hanging fruit.
In this first part, replace
qWarning() << "...";
with
qWarning("...");
Change-Id: I1f6869b024103c98262f1deae014e0d7337a541c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The latter is much faster as it doesn't have to deal with
time zones.
This change is safe, because the QDateTime is only used to
compare against a copy of itself, adjusted by some seconds,
which doen't care which TZ the date-time is in, to get a
time_t, which is much faster done from a UTC time, and
to calculate the seconds to expirationTime, which, from a
quick glance around, seem to be mostly, if not exclusively,
in UTC. secsTo() works across time zones, but the comparison
between UTC date-times is fastest.
Credits to Milian Wolff, from whose QtWS15 talk this advice is
taken.
Change-Id: I22aa5350b29493f01fb503ef5ec68a964ca95cf3
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Back in the old days, we would pad the output from the font engines
to work around problems with the GL1 paint engine such as issues
with linear sampling, etc. This is no longer needed. Padding is
moved into the glyph cache, and in addition to reducing performance,
the extra padding is also making alphaMapForGlyph() and
alphaMapBoundingBox() fall out of sync when you fall back to
QPainterPath drawing the glyph. The result of this was that,
when prepared, the glyph cache was sometimes not made large enough
to hold what alphaMapForGlyph() actually produced, depending on
the size and order of glyphs, and glyphs ending up at the end of rows
would sometimes be missing from the output.
[ChangeLog][Text] Fixed some instances of missing glyphs when
drawing large fonts.
Change-Id: Ia5982392fe1637f6ebc740db9f226fbb91f75166
Task-number: QTBUG-47547
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This commit removes the legacy ptrsize check, which was deficient
because it did not work for multiarch systems (when we supported fat
OS X binaries) and did not work for bootstrap builds because the size
might be different when cross-compiling.
Instead, let's rely on the predefined preprocessor macros to detect
correctly. As a nice side-effect, this fixes 64-bit Android builds
cross-compiled from Windows.
Task-number: QTBUG-48932
Change-Id: I1d0f78915b5942aab07cffff140f9a52b9342f23
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@theqtcompany.com>
qgltf is a tool provided by the Qt3D module that enables 3D assets to
be defined in qmake project files, and have them converted to an
efficient binary format at build time. The qmake feature will convert
all 3D assets specified by the QT3D_MODELS variable to the qgltf
format and add the new model asset to the project as a Qt resource
file.
Change-Id: If7250d6f23a06254b1ed0e408057723763aad8c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Windows 10 uses one enum for all target platforms. Use
ApiInformationStatics to identify whether enum values are accessible at
runtime.
Change-Id: Ib77c9d2a2b5cf1655fbe7d937d0c83cc4cdd9ee9
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Handle various cases where we have null QScreen or QPlatformScreen
pointers. With this change, I can run Qt Creator for several days.
Before, it would crash multiple times per day with a two-monitor
setup.
Change-Id: I0923d886ae2a4199ac37edd711ddd4f6f99df93d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
Opt-in by setting android.app.auto_screen_scale_factor
to true in AndroidManifest.xml. This will enable
devicePixelRatio scaling in QtGui using a scale
factor provided by Android DisplayMetrics.
Note that the Android style is not currently supported:
it already accounts for different display densities
which results in incorrect visual sizes when enabling
devicePixelRatio scaling.
Implementation: Bring DisplayMetrics::density through
to setDisplayMetrics in androidjnimain.cpp, similar
to what is done for "scaledDensity". Override
QPlatformScreen::pixelDensity(), which forwards the
scale factor to QtGui.
[The difference between "density" and "scaledDensity"
is that the former is a physical display density factor
which corresponds closely to devicePixelRatio in Qt,
while the latter also includes the Android global font
scale factor.]
Scale the global font pixel size in qandroidplatformtheme.cpp
to keep the visual font size constant.
Based on an initial patch from Daiwei Li <daiweili@suitabletech.com>
Task-number: QTBUG-46615
Change-Id: Ia51f99bf6dda485a57413949246c7b32cb47e8dd
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Call QHighDpiScaling::updateHighDpiScaling() in init_plaform(),
after the platform integration has been created and most platforms
have populated the screen list. Keep the existing udpate call for
the platforms that don't, but guard against calling it twice.
Task-number: QTBUG-47947
Change-Id: Ib73bea7c4ab42e7acf6532f3a3100e1fc29acc2c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
The latter is much faster as it doesn't have to deal with
time zones.
This change is safe, because the timestamp member is only
ever handled inside, and the calculation of the time difference
does not depend on any particular time zone.
Credits to Milian Wolff, from whose QtWS15 talk this advice is
taken.
Change-Id: I6c9190a4253ce5972871ab1f12870f8ae9891966
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Truetype fonts should be rasterized with a winding fill
as documented in e.g. Microsoft's specs.
Failing to do this caused a bug when doing native
rendering in Qt Quick for fonts that were large enough
that the fallback path was taken when drawing the glyphs
into the cache. If the glyph had overlapping contours,
they would be subtracted from the shape.
[ChangeLog][Text] Fixed an uncommon rendering error with
fonts containing overlapping contours.
Task-number: QTBUG-41197
Change-Id: I0e4a4432ba3f902bc3ea59d8f4dbd12a295630b2
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Partially revert c7abf81786. Instead of using the ES3 entry point,
use ES2 for framebuffer blitting. This means that a small change is
required to ANGLE for the blit behave the same as ES3 (applied only for
Windows Store apps).
Task-Id: QTBUG-48266
Change-Id: Idc51f00a659c91f740876be071eb71bff69e0e38
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
