Since its introduction in commit
65bb1a25419210e6097cad973fb847aa3719c09b (old internal history, 2005)
with the commit message "optimizations I've been sitting on here"
we're dragging along this dead code. It is time for removal.
Change-Id: Ic7902ebb8c402734974ad6651a1371d1e5bf93c5
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
create_cmake.prf populates the values of CMAKE_RELEASE_TYPE and
CMAKE_DEBUG_TYPE depending on if Qt was configured with debug, or
release, or the build_all feature was set (which implies
debug_and_release).
simulator_and_device also implies build_all. This
is a problem when configuring a Qt simulator_and_device build with
only a "debug" configuration, or only a "release" configuration.
In that case we would try to parse prl files for both configurations,
even though only one configuration exists.
Switch to checking for debug_and_release scope explicitly instead of
build_all. This allows configuring and building a Qt iOS
device_and_simulator debug configuration which is usable from CMake.
Task-number: QTBUG-38913
Change-Id: Ife6d5d34d2b6bb1ac787d901a166e41c6e0c844b
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
/OPT:REF is enabled for release builds for MSVC by default,
however, clang-cl may not enable it without this flag,
add it to MSVC's mkspec so that all compilers based on MSVC
can benefit from it as well.
Change-Id: Ia80c20a8510cfa1e4687e39104ce99b37a2aa13f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This commit adds transitive dependencies to the plugins, so that a
sane set of default plugins get auto-imported when linking against a
module. It also provides a new function, qt5_import_plugins(), which
allows you to override the set of plugins that get imported. The decision
of whether or not to import a specific plugin is based on several custom
target properties and a very clever generator expression.
Note that this change only imports plugins on static Qt builds. It
does nothing on shared Qt builds, as the shared libraries already have
their own plugin import mechanism.
[ChangeLog][CMake] Added ability to auto-import non-qml plugins on
CMake builds
Task-number: QTBUG-38913
Task-number: QTBUG-76562
Change-Id: I2d6c8908b521cf6ba1ebbbc33a87cb7ddd9935cf
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When doing plugin auto-importing as part of a Qt static build, it can
happen that the same module FooConfig.cmake file is loaded twice.
Make sure not to create the same target twice if it was already
created previously.
Task-number: QTBUG-38913
Change-Id: I734c83ff3c0bb9e3ee9bff37971209c57abaa2b9
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
clang-cl will never support C++ standards newer than
C++14 without these flags.
I didn't add them to msvc-based-version.conf because
on Windows, only clang-cl use the same flags with MSVC,
both ICC and MinGW have their own flags. So they are
clang-cl specific flags.
Change-Id: Ia44a5ea4237c77ea5e897fffded32cbc008a4729
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This enables building against the latest SDK, while still opting out
of features that this SDK normally enables, by lowering the SDK version
set in the BUILD_VERSION/VERSION_MIN_MACOSX load command.
Change-Id: Id5f13524740bfbf5eda10a5d0c2e3fda04bf3f52
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Now that all QLinkedList uses are removed from Qt, make sure
QT_NO_LINKED_LIST is set by default for Qt modules, so new
modules don't need to explicitly specify it in their
.qmake.conf.
Modules can still opt out of the QLinkedList ban by adding
DEFINES -= QT_NO_LINKED_LIST
to their .qmake.conf.
Change-Id: I34b7ab1c009795649bb7b4f1e7493556eafadd5a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
After commit 9c7ebd191b, qmake would
complain about missing cmake tests even for internal modules that have
no application side C++ linkage that needs testing.
Change-Id: I23b23c81dbe6be2b6da5672cbd7b8f8454ec2f66
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On Windows, create a file containing include paths for QDoc in
cases where number of include paths exceed 30. Based on how moc
does this.
Task-number: QTBUG-68259
Change-Id: I0d03fab4b809174cb6b48c36ee9f8880ff294ff4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Martin Smith <martin.smith@qt.io>
Beta version of Xcode 11 changes the format of the json object
returned by simctl and used to detect running simulators.
While multiple versions of Xcode can coexist on the same system,
they share the same simulator infrastructure so installing
Xcode 11 Beta affects projects using previous versions.
Change-Id: Icf06a794aa5ba3624163ace2ce827c0ecf97c38c
Reviewed-by: Frank Osterfeld <frank.osterfeld@kdab.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Conflicts:
configure.pri
Also required s/solid\.color/solidColor/ in a couple of places in:
src/gui/painting/qpaintengine_raster.cpp
Change-Id: I29937f63e9779deb6dac7ae77e2948d06ebc0319
In a CMake regex, you need two backslashes to escape a character. The
.in file therefore needs four backslashes ...
This amends ba4fdd99ff
Fixes: QTBUG-76698
Change-Id: Ic757354ba596bf020c3ee5e90ee6d2d0fe3ba352
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When building Qt, qt_build_config.prf adds all directory variables but
DESTDIR to QMAKE_DIR_REPLACE_SANE. We must not add the content of
QMAKE_DIR_REPLACE_SANE unconditionally to QMAKE_DIR_REPLACE in order
to avoid duplicate entries.
Duplicate entries result in an interesting build folder structure like
.obj
├───debug
│ └───debug
└───release
└───release
This commit amends 274882a5.
Change-Id: Ifa8178410d82f58635babc46d43774bab522fbf8
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This reverts commit 17512d497d.
Reason for revert: force vmx instructions to Coin level B virtual
Relates to qt/qt5 84ff024609e4eca003c604294b4102e73deba8c3
Change-Id: Id87a5629a5cd6ebc18c676eae390466e280fc600
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This change will create Config.cmake files for internal modules like
AccessibilitySupport when doing static builds. They need to be
find_package()'ed and linked in when linking in certain qt plugins.
Task-number: QTBUG-38913
Task-number: QTBUG-76562
Change-Id: Ia2e446025c87df48f20bb65cfd9da6c6a4354bb1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When adding the static dependencies for a module, they should be
added to the debug|release configuration as appropriate, otherwise
it ends up adding the debug version of the libraries to the release
configuration as well as the release version of the libraries.
Implementation wise, that means we have to use generator expressions
of the form $<$<CONFIG:Configuration>:${dependencies}>, because
INTERFACE_LINK_LIBRARIES does not have a
INTERFACE_LINK_LIBRARIES_<CONFIG> equivalent that can be set per
configuration.
Note that the condition part of the generator expression can not
explicitly check for Debug or for Release, because a user can
configure their application without specifying CMAKE_BUILD_TYPE,
which means that both Debug and Relase conditions would fail.
So the actual condition has to be isDebug or isNotDebug.
The same approach is used for INTERFACE_LINK_OPTIONS.
For debug_and_release builds we use the isDebug and isNotDebug
conditions for the generator expressions.
For singular builds (only release or only debug), we set the
generator expression condition to "1" aka always true.
This means that the Qt libraries and link options will always be used
regardless of the configuration with which the CMake application
is configured with.
Fixes: QTBUG-76337
Task-number: QTBUG-38913
Change-Id: I5369d8ba083359a4a92253dbd1dabe9d1efa34db
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The absolute paths of certain static dependencies can have spaces in
them. The _qt5_$${CMAKE_MODULE_NAME}_process_prl_file fails to handle
this, and simply replaces all spaces with semicolons, which obviously
breaks the list of dependencies, and a consuming application fails to
link with a message like:
LINK : fatal error LNK1181: cannot open input file 'C:\Program.obj'
This change partially restores the functionality that was added in
102e1822ff specifically the part
that changes qmake to export an additional variable
QMAKE_PRL_LIBS_FOR_CMAKE. This variable has the same content as
QMAKE_PRL_LIBS except it uses a semicolon as a separator, so that
CMake can correctly parse the separate lib entries.
This is much cleaner than trying to parse the original QMAKE_PRL_LIBS
variable with a complicated regular expression.
Amends eda28621f6.
Task-number: QTBUG-38913
Change-Id: I1d18fb779606505bc92320d8ce13232c7022e212
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The paths to the libraries and prl files should have the "_debug"
suffix for the debug configuration. This prefix is added to the TARGET
when by qt_module.prf when doing a debug build, but not during a
debug_and_release build.
Make sure to strip the _debug suffix if it's there, and re-add it later
always, to be consistent in both debug_and_release builds and in
debug builds.
Amends a12b6e7bf6.
Task-number: QTBUG-38913
Task-number: QTBUG-75520
Change-Id: I29e88f2b991e2be06b23652d64edc768fa35a5ae
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The header clean command must not be prefixed by "@echo ...", because it
now starts with "$(CXX)" which already is prefixed.
This amends commit 6fa5dfdd.
Change-Id: I5c2e0d2c2ed91c7232fce0a4a49db0fccfdc005d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
By running dumpcpp if the files do not exist at qmake time we enable
the dependency finder to find these files and set up the dependencies
as appropriate. Since other changes ensure that dumpcpp will be called
at the right time when building if the typelib changes, we no longer
need to have the generated files dependent on the objects. As a
result, we are able to prevent it from unnecessarily rebuilding
everything if certain files are updated.
Change-Id: I334f48c7a980aa8b893c14cb2a4687d3b2b7a4b9
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Like in Qt code itself we should use forward slashes consistently.
This enables the vulkan test to run on Linux for MinGW
cross-compilation.
Task-number: QTBUG-76660
Change-Id: Ifc6dec11bac3c3769d5d06e49da529f66f7b5843
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
By default RTEMS does not support linux extensions for errno.
Enable it for build.
Change-Id: I43b346794b99ac0ed339bfbe6e39684071615503
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
This change is used to generalize a template docker-compose file for all
modules. Ideally, the leaf module only need to keep a docker compose
file for all platforms (docker-compose.yml).
NOTE:
The version of docker-compose file downgrades from 3.4 to 2.1 because
the 'extends' keyword is not supported in Compose version 3.x.
Change-Id: I2e36fd9236eda86cb5fcf940d787ccefe9200696
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The make executable that comes with Android's NDK tries to execute the
shell-builtin "move" as a stand-alone executable unless you trick it
to execute "move" through the shell by surrounding one argument with
double quotes or such.
Force the execution of "move" through shell by altering QMAKE_MOVE for
Android on Windows.
Change-Id: I5b1490ad0606960dbd06a4cafb0b0b983e265159
Fixes: QTBUG-35713
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The directory must be prepended by = to denote the sysroot.
This amends commit 797f686e.
Change-Id: Ib85c0abc58fce3504ecccef0e223b2618ac9149a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
We must use the same two-level replacements like for .prl files.
This amends commit d5071a40.
Change-Id: Iea065d01dee61cf2d1ff78640d045c3c76db9ac8
Fixes: QTBUG-76625
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Static libraries may get installed and used by other builds, which may
be done with a different version or build of the compiler. So this
commit introduces two new flags:
- no-static-ltcg: disables LTCG completely for static libraries
- fat-static-lto: forces static libraries to produce fat LTO objects
fat-static-lto is useful for Linux distributions, since installed static
libraries should not carry LTO information, but that information is
useful during Qt's own build. This feature should be used alongside some
compiler-specific method of removing the LTO information from the
static libraries prior to installation, so only the regular part
remains.
For current GCC versions, this command suffices:
strip -R '.gnu.lto*' -R '.gnu.debuglto*' libname.a
Otherwise, distributions can use "no-static-ltcg" to disable it
completely.
Change-Id: I495bc19409f348069f5bfffd155237ade9f4b42f
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
