Fixes the default C version used with gcc < 5
Change-Id: I948dece961caed8e6b181e1c6e6b9dc43c46583f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When QFile::open is called with the NewOnly flag, the call will
fail if the file already exists. As usual, if the file does not exist,
it will be created. Like QTemporaryFile, there is a guarantee from
the operating system that you are not accidentally creating a new file
on top of an older file. When QFile::open is called with the
ExistingOnly flag, the call will fail if the file does not exist. The
ExistingOnly flag only provides new functionality when used with the
WriteOnly flag. For ReadOnly it provides no change in functionality,
as ReadOnly by itself already never creates.
Task-number: QTBUG-52244
Change-Id: I8e3206728f245f95172c225bf297023fb078fc6d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
mingw-w64 toolchain:
- add missing compiler definitions, similar to
'msvc-desktop.conf' toolchain,
- describe the reasons of missing compiler definitions, available in
'msvc-desktop.conf' toolchain,
- add missing 'QMAKE_CXXFLAGS' and 'QMAKE_CXXFLAGS_WARN_ON' variables,
similar to 'msvc-desktop.conf' toolchain.
ICC on Windows toolchain:
- add 'QMAKE_CFLAGS_OPTIMIZE_FULL' variable, similar to 'gcc-base.conf'
toolchain, though left it unused for now,
- add missing flags to 'QMAKE_CFLAGS' variable, similar to
'msvc-desktop.conf' toolchain,
- update deprecated 'Qwd' flag with 'Qdiag-disable',
- use 'QMAKE_CFLAGS_OPTIMIZE_DEBUG' variable instead of '-Od' flag,
similar to 'gcc-base.conf' toolchain (ICC implies '-O2' optimization
level by default, while MSVC implies '-Od'),
- add 'QMAKE_CFLAGS_UTF8_SOURCE' variable, similar to
'msvc-version.conf' toolchain; use a workaround to initialize it,
until '-utf-8' flag would be supported by ICC on Windows,
- update deprecated '-Qstd=c++1z' flag with '-Qstd=c++17',
MSVC toolchain:
- remove 'incremental' from MSVC 'CONFIG' variable, since it has
relevance only for the Unix generator,
- add 'QMAKE_CFLAGS_OPTIMIZE_DEBUG' variable, used in ICC for Windows
toolchain,
- add empty 'QMAKE_LIBS' variable, similar to 'win32-g++' toolchain,
- add 'uuid.lib' library to 'QMAKE_LIBS_GUI' variable, similar to
'win32-g++' toolchain,
- add C++14 and C++17 language support flags, though left them disabled
for now, similar to 'win32-icc' toolchain.
Change-Id: Ideef62d0422674184836faa655bfc5d09a5f612f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Common changes to mingw-w64, ICC on Windows, and MSVC toolchains:
- set similar order of variables and its splitting into sections,
- set similar order of flags in variables and the way they are set.
mingw-w64 toolchain:
- move 'gcc-base.conf' include before setting Windows specific
flags, similar to include 'msvc-desktop.conf' in ICC on Windows
toolchain; this leads to consistency with other toolchains
and allows to safely override common GCC variables with Windows
specific ones, when needed,
- move 'QMAKE_EXT_OBJ' and 'QMAKE_EXT_RES' variables to the linker
flags section, according to its purpose.
MSVC toolchain:
- set flags order in 'CONFIG' variable, similar to mingw-w64 toolchain.
Change-Id: I417cc8f7959c669dd504f2c5c11eb879a7989bd4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If the linker supports it, add the gdb index to the debug symbols, which
makes loading gdb on Qt libraries much faster.
Change-Id: I2ed201c22913b97ac2efaefb5e31636e795ae102
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
It seems the compiler supports /arch:AVX512 and /arch:AVX512F but none
of the other switches (and neither are documented). And when you pass
those, you also get Conflict Detection (CD), Double & Quad (DQ), Byte &
Word (BW) and Vector Length (VL), which matches the ICC switch
"-xCORE-AVX512". Unlike ICC, there doesn't seem to be an option to
enable only the common part of AVX-512.
Support for Intel Xeon Phi's current features (Exponential &
Reciprocation and Prefetch) and future ones (IFMA, VBMI, 4FMAPS, 4VNNI
and VPOPCNTDQ) seems to be missing altogether.
See https://blogs.msdn.microsoft.com/vcblog/2017/07/11/microsoft-visual-studio-2017-supports-intel-avx-512/
Change-Id: I98105cd9616b8097957db680d73eb1f86e487e6d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Common changes to mingw-w64, ICC on Windows and MSVC toolchains:
- update toolchains description similar to 'gcc-base.conf'.
Change-Id: Ie456c6cec86c0d1c0107ca84a0fa7855666df91e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
I need to include linxx/if.h from elsewhere and these two files conflict
by defining the same types (struct ifreq, struct ifmap, struct ifconf,
etc.)
Change-Id: I0a103569c81b4711a649fffd14eb2f6dbbef83b6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This definition causes a build error if concrt.h is included.
According to Microsoft [1], this macro is unsupported. It was added in
f5908363 to silence compiler warnings that are generated when exceptions
are turned off and certain STL headers are included.
We specifically disable the warnings in question now.
[1] https://blogs.msdn.microsoft.com/vcblog/2015/07/14/stl-fixes-in-vs-2015-part-2/
Task-number: QTBUG-63409
Change-Id: I567d5d46292fbd7898394e217bb0987fbcdca9de
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
Define the lib dependencies for corelib in corelib.pro, where they
belong.
Change-Id: I973d3b0c571782d869b27dea243e899db4dddc43
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
clang+libc++ is the only supported way by Google nowadays.
libstdc++ is too old and already fails to build some C++11 apps
e.g. missing std::to_string().
android-g++ mkspec still uses libstdc++ and g++.
Use -isystem to include system headers instead of QMAKE_INCDIR_POST (-I).
Task-number: QTBUG-60455
Change-Id: Iba8b04594c2e5e2832e6cf480e4e52ff31ad4106
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Replaced dependency to libdl.a with libshm_client.a. Defined symbols
'shm_area_password' and 'shm_area_name' internally. The build for
INTEGRITY is static only so libdl.a is not needed.
Change-Id: I7e34528835132d79ea582a30cf9ff61cdda198da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For clang -Os is very similar to -O2 and doesn't really reduce size much.
-Oz is usually what you want to use with clang for code reduction.
Now clang binaries are only 9% bigger than gcc's, instead of 22%.
Change-Id: Ib0ba560be26db68aeb21c13df4b151b7fbd81431
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Instead of expanding the VULKAN_SDK environment variable at Makefile
processing time, expand it at qmake time, so that a resolved include
path is passed to WebEngine's build system GN.
Task-number: QTBUG-61823
Change-Id: I63bd661350883d22af2ccdeb7c360ed0d8d881c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
It is considered slightly faster than the default mode[1],
but on Windows it causes trouble when aborting the build,
it leaves behind zero-sized object files which cause link
error. See discussion in the bug-make mailing list[2].
[1] https://stackoverflow.com/a/1512947/764870
[2] http://lists.gnu.org/archive/html/bug-make/2017-06/msg00066.html
Change-Id: I7aa0b328a8c743fdfe9b0aece02b329066515076
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
System headers like tchar.h need the _UNICODE define, not UNICODE.
While qplatformdefs.h already provides _UNICODE when UNICODE is
defined, users might want to include tchar.h without Qt includes.
This is consistent with Visual Studio's default defines.
Task-number: QTBUG-61411
Change-Id: I2f604368080270d840f0dbb2cf273805d2ba5239
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Introduce uap3 namespace which is used for newly introduced
capabilities. In addition, the autodetection of namespaces for
capabilities within the uap namespace is disabled in Visual Studio
lately. Hence, the output needs to be more verbose including the
namespace for a capability.
Task-number: QTBUG-60899
Change-Id: Ia1ccf825d4c257d2661e34c195c45fd37e0b6413
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This was originally enabled in the mkspecs for 64-bit QNX 7.0.0
but that broke when the qtConfig change was made. It looks like
qtConfig shouldn't be used in the platform mkspecs. I suspect
the stack-protector changes were left out of the 32-bit mkspecs
so that 6.6.0 builds wouldn't be affected.
Ignore the stack-protector/stack-protector-all possibility since
it isn't possible to access it without a command line option.
Specifying both options doesn't even make sense since
stack-protector-all encompasses stack-protector.
For now, leave out command line control of this feature.
Task-number: QTBUG-59644
Change-Id: I99323216be5b592dd2c3bef6d22da195764a6e65
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The instruction is "RDRAND", but the feature name, according to GCC, is
RDRND, so I had to change some macros in qsimd_p.h.
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5166779137e63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The flag makes the build fail for UWP as well as desktop Windows . It
will trigger a compile error as soon as UWP API is used, which happens
in qtbase for desktop in the direct2d backend, but it is also used for
other Qt modules, so we decided to disable the flag for now.
This patch partly reverts b7d76e533c
Task-number: QTBUG-61239
Change-Id: I0cc630f4c09c52f0c116f4a7b95a44c3a55e0be3
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
That's not the same as -Za.
Change-Id: Ica9894dc9b5e48278fd4fffd14bb316b687abffe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
adding shared install paths via QMAKE_LFLAGS in the spec has the tiny
side effect that they are searched _first_, which is generally a really
bad idea - they should be _last_.
for that purpose, introduce QMAKE_RPATHLINKDIR_POST, and migrate all
specs to use it.
QMAKE_RPATHDIR_POST is added for consistency, but not actually used.
Task-number: QTBUG-59457
Change-Id: Iac6cda5e9111ef8cca454a69861fe8408bb40589
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
adding shared install paths to QMAKE_{INCDIR,LIBDIR} in the spec has the
tiny side effect that they are searched _first_, which is generally a
really bad idea - they should be _last_.
for that purpose, make QMAKE_{INCDIR,LIBDIR}_POST live up to their names
(i.e., search them actually last) and migrate all affected specs to use
them.
Task-number: QTBUG-40825
Change-Id: Ie0de81c3cc49e193186d2fedd7d6c77590c8ef79
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
As Qt applications using OpenGL are linked against these libs, merging
them into QtANGLE by default (780105f906)
was a binary incompatible change. This change restores the default
behavior to the one before given change.
If the user wants the libraries to be merged, he can pass
combined-angle-lib to configure.
Task-number: QTBUG-60373
Change-Id: Iedbd3f2ce9284fdde924cfae8d915d6d5fef00db
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Adds default off configure flag to use compiler optimizations
for size instead of the default speed/size trade-off.
Change-Id: I36702064ef2cc743d2d03a386adf5cefd5371b6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Let's not allow any new code that uses non-conforming syntaxes. With
GCC and like, we already use -std=c++11 instead of -std=gnu++11 for that
very reason.
Change-Id: I4a7dc1fe14154695b968fffd14aba9f8cea69c47
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Neither the Intel compiler nor Visual C++ have a dedicated switch to
enable F16C support, like GCC and Clang do. So we used the AVX switch
for that in commit 8241d51f70, as it was
the closest, lowest denominator. That was incorrect and insufficient.
The Intel compiler silently miscompiles the intrinsics with -xAVX,
making calls to out-of-line functions like _mm_cvtps_ph, which don't
exist. So we actually have to use AVX2 support to generate correct code.
That might be a problem later, since Ivy Bridge supports F16C but not
AVX2.
Visual C++ is able to generate F16C code with just -arch:AVX.
Either way, since there's no dedicated command-line switch, there's also
no dedicated preprocessor macro. We're using __AVX2__ for both
compilers, as that's a sufficient condition to indicate a processor that
supports F16C.
Change-Id: I27b55fdf514247549455fffd14b205b8d8b86da7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
For Android, Windows and xcb. Verified on Win10 with NVIDIA, Win10
with AMD, Android with Tegra K1, Android aarch64 with Tegra X1, and
Linux aarch64 with Tegra X1 (Jetson TX1, L4T).
Introduce QPA-based Vulkan library loader, core function resolver, and
instance creation support. In addition to creating a new VkInstance,
adopting an existing one from an external engine is supported as well.
The WSI specifics are hidden in the platform plugins. Vulkan-capable
windows use the new surface type VulkanSurface and are associated with
a QVulkanInstance.
On Windows VULKAN_SDK is picked up automatically so finding vulkan.h
needs no additional manual steps once the LunarG SDK is installed.
[ChangeLog][QtGui] Added support for rendering to QWindow via the Vulkan
graphics API.
Task-number: QTBUG-55981
Change-Id: I50fa92d313fa440e0cc73939c6d7510ca317fbc9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The AES instructions were first introduced with the Westmere shrink
(22nm) of the Nehalem architecture. The SHA instructions are still
pending on Intel architecture, but is available on AMD family 17h (gcc
argument -march=znver1).
Both features operate on SSE registers, so that's why the MSVC command-
line argument is the SSE2 one and the configure-time tests depend on
features.sse2.
The qmake feature names end in "ni" because "aes" and "sha" are too
simple and could clash with other uses. The QT_COMPILER_SUPPORTS_ macro
doesn't have the "NI" suffix because it has to match the GCC/Clang
predefined macro.
Change-Id: I445bb15619f6401494e8fffd149dbd1f862ff51c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Use F16C or ARM FP16 if available at compile time.
Configure check added because older clang compilers have F16C defines
and flags but not all the intrinsics.
Change-Id: I71f358b8fd003e70ab8fcf35097414591e485112
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is an old error of the gstrip binutils. The bug has been corrected
and re-introduced.
The command *elfdump -d xxx* on the ELF does bring lines like those :
.SUNW_syminfo: invalid sh_info: 0
Task-number: QTBUG-58814
Change-Id: I330c4031dcf4ba64297df4b333b41cf0a003914f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The path match OpenIndiana distribution based on Illumos.
Task-number: QTBUG-56293
Change-Id: I44e7defa63809dc4f413b46329481b53e5e74c30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Use of gcc-base.conf, g++-base.conf files and creation of solaris.conf.
The content of solaris.conf should follow the content of linux.conf.
Task-number: QTBUG-56293
Change-Id: I59cf9efa82ab0a2b22ea1a58f6339280460e5f92
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Building qt with msvc would fail with the -developer-build configure
option turned on under simplified chinese locale.
This is because msvc will emit warnings for source files with utf-8
characters which are not representable in CP936, and -developer-build
implies treating warnings as errors.
This patch turn on -utf-8 compiler option for msvc2015 update 2
and up only for building qt.
Task-number: QTBUG-58161
Change-Id: If38ea11eb1f39f8e08efa1cccb92e0eea50daf92
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The uvfd flag is implicitly defined when -Olink is used.
This causes the compiler to generate a warning for every
file being compiled in release mode.
Change-Id: I75759151864da7cf2f6d9c812e466a52c1208444
Reviewed-by: Nikola Velinov <nvelinov@ghs.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The patch fixes a number of bugs in code, and removes dead logic
clarifying that MIPS DSP, like ARM NEON, has no runtime detecton.
Change-Id: If2f4eea68da5b2eaa80b8e9c8258206d8c1b7173
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Enables optimizing with -Og if GCC has the option available, this
should produce faster debug binaries without compromising debugability.
Is a privateConfig to limit it to the default Qt build.
Includes two fixes for false positives of maybe_uninitialized triggered
by -Og on gcc 4.9.
Change-Id: I466d7a4070295714189024369312e6cbd36cfacf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This was used solely for building freetype. It was made obsolete as of
2eaf0cf8fd which upgraded freetype to a
newer version which does not rely on that define, first included in 5.5.
Change-Id: Iaaea8d6783032d784f0a370f8404972967fa7a06
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
[ChangeLog][QtBase][General] Removed support for WinRT/Windows Phone 8.1.
Task-number: QTBUG-57288
Change-Id: Ifd6d6780cbbdb710d99556ba3d2fb2e514d4f789
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Initial support for INTEGRITY to build QtBase
Change-Id: I18f36b4dea9107f01e1c281e4b62880590c777a1
Reviewed-by: Tuukka Turunen <tuukka.turunen@theqtcompany.com>
Reviewed-by: Nikola Velinov <nvelinov@ghs.com>
Reviewed-by: Risto Avila <risto.avila@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this is mostly for appearances (as evidenced by everything working
despite it being missing from some specs), as the variable is just a
fallback for moc.prf's automatic detection.
Change-Id: Ie4af24c02ec03aaa1810281d1bb6876ea38cedf8
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Since we can tell the MSVC version from the compiler now, each of the
qmake.conf files is now the same, so let's just have "win32-msvc" and be
future-proof. Likewise for win32-clang-msvc.
qplatformdefs.h was already common.
Since we can't obtain the MSVC version from the unified mkspec name any
more, I dropped the warning level during the qmake bootstrap to reduce
the number of warnings that need to be disabled from compiler version to
version.
There is no point in keeping the old mkspecs, but configure will re-map
the -platform argument to the unified spec as necessary, to keep
existing configure command lines working.
[ChangeLog][Visual Studio] Qt now has a common mkspec for all Visual
Studio versions, called "win32-msvc". The old names which contained the
version number are now gone (but qmake scopes based on the old names
continue to work). The version of the compiler can be obtained from the
MSC_VER and MSVC_VER variables (for example, for Visual Studio 2015,
those contain the values 1900 and 14.0, respectively). Those variables
are also available with the Intel compiler (win32-icc) and with Clang
(win32-clang-msvc).
Done-with: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: Ib57b52598e2f452985e9fffd14587c0a77a5c09c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We're asking the compiler anyway, so we can fully use this information
just as well. Note that this actually happens after the spec itself has
been processed, so it was necessary to delay the version-specific flag
handling as well.
Change-Id: Ib57b52598e2f452985e9fffd14587b581d946022
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this makes it consistent with the determination of the default
include/library paths. this makes sense, as it's possible to switch the
sdk/toolchain after building qt (within reason).
a side effect of this change is that for compilers which emulate other
compilers, both the real and the emulated version are now made
available.
Change-Id: Icfcc672c0d2e3d1b5e622993c366063d70ad327c
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is needed in order to be able to specify a custom location of
the ANGLE libs, and enables us to perform a LoadLibrary of ANGLE libs
by just having the absolute path to QtANGLE.dll as the argument to
LoadLibrary().
Previously, we had two ANGLE libraries: libEGL and libGLESv2. libEGL hard
linked against libGLESv2. If we wanted to load libEGL from a custom
location, we couldn't load libEGL by calling LoadLibrary with the absolute
path to libEGL, because libEGL had problems finding libGLESv2. One
solution to that could have been to call SetDllDirectory() with the path
to the ANGLE libs before calling LoadLibrary("libEGL.dll"). Since the DLL
directory would point to both ANGLE libs, this would ensure that the libGLESv2
was also found. Unfortunately, this approach is not thread safe
(SetDllDirectory will affect all subsequent LoadLibrary(Ex) from the same
process). Therefore, we chose to merge the two libraries into one to
circumvent the whole problem.
At the same time, this patch also enables loading of two different ANGLE
libraries into the same process at once without renaming them: This was
not possible before because libEGL hard linked to libGLESv2.dll. When
libGLESv2.dll was already loaded, the second instance of libEGL would
simply link against the already loaded version of libGLESv2.dll.
This behavior is documented in the LoadLibraryEx documentation on MSDN:
"If the string specifies a module name without a path and more than one
loaded module has the same base name and extension, the function returns a
handle to the module that was loaded first."
Change-Id: Ic1d886ba802be72ddcf01235bafaedcef662762e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
This scheme is needed to define Bluetooth (LE) capabilities on Windows
Phone 8.1. Setting these capabilities is a bit more involved than what
we currently support from qmake (see
https://msdn.microsoft.com/library/windows/apps/dn263090.aspx) but this
way we at least prepare the template for these steps.
On Windows 10 the bluetooth capabilities are set automatically similar
to the way it happens for other modules.
Change-Id: Ib3aa88802c3b421c9c3d02ec4db647cde2191f16
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Split them and add -I flags to INCLUDEPATH and -D flags to
DEFINES. Anything else gets reported as a problem and dropped.
This has the benefit that qmake will automatically use -isystem for
those paths if they lie in a system directory. As a consequence of that,
we won't get any warnings in headers located there. There are multiple
cases of glib, gtk, etc. headers producing warnings (such as enums
ending in comma). This does not fix warnings produced by use of macros
declared in system headers, though...
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I4b844cb518dbae5ea499811221f9015af985110a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is now centralized in configure.pri except where it explicitly
needs to be overridden.
Change-Id: If829d6b5eecf9a5fc403d0a0600d12c9e5781525
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
There's no reason for this to be separated, regardless of the
support status of i386 macOS builds. Additional architectures may
appear in the future (and currently there's actually 3 - i386,
x86_64, and x86_64h for Haswell CPUs). So this feature could be
used to get combined generic x86_64 and Haswell builds. Some
system libraries appear to have an x86_64h slice in Sierra.
[ChangeLog][Build System] Support for universal binaries on macOS
has been re-introduced.
Change-Id: I1c89904addf024431fdb3ad03ea8ab85da7240ad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This essentially emulates Xcode behavior for QMAKE_BUNDLE_DATA.
This is mostly for our own internal use. No documentation is provided.
Variables introduced:
- QMAKE_ASSET_CATALOGS
- QMAKE_ASSET_CATALOGS_APP_ICON
- QMAKE_ASSET_CATALOGS_BUILD_PATH
- QMAKE_ASSET_CATALOGS_INSTALL_PATH
Change-Id: I9577415d637f022d05f301c5a0d799483cd2a963
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the code got factored out to an own toolchain.prf file, which is
load()ed from default_pre.prf, so no change at first.
however, on mac, we shadow toolchain.prf, and make it load() sdk.prf
first.
a side effect of this is that project files may not override
QMAKE_MAC_SDK any more, which seems to be no big loss. it is still
possible to override the sdk on the configure command line (but note
that this only ever worked for the target sdk).
it has also become harder to disable the use of an sdk altogether:
putting CONFIG-=sdk into a project file or the qmake command line has no
effect now. instead, it's possible to put it into .qmake.{conf,cache}.
to make it simpler again, it's conceivable to finally add qmake -pre,
which would allow setting variables before default_pre.prf is executed.
Change-Id: I149e0540c00745fe8119fffd146283bb214f22ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... to the new qmake based configuration system.
This removes the old qfeatures.txt (distributed over configure.json
files) and qfeatures.h (distributed over qconfig-<module>.h files).
qfeatures.prf is gone without replacement, as attempts to use it would
lead to followup errors anyway.
Change-Id: I1598de19db937082283a905b9592d3849d2199d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Actually enables headerpad_max_install_names in the darwin-g++ mkspec
as previously it was (presumably accidentally) cleared.
Change-Id: I4b2e5a0dcf38658cfe35bc0e5f24769c80f4d877
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Now QMAKE_RPATHDIR also includes @executable_path and @loader_path
on Apple platforms, and omits any others on iOS, tvOS, and watchOS
since they can't use paths outside the application bundle.
Change-Id: Ia8f76ebcddd51f44eca482a51ce1710369c8df10
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
cf53aa21bf and 3aaa5d6b32
were reverted because of reconstruction in 5.7.
defineTest(qtConfTest_checkCompiler) in configure.pri is smart
enough to cover the case in a9474d1260.
DirectWrite: Fix advances being scaled to 0
Since 131eee5cd, the stretch of a font can be 0, meaning
"whatever the font provides". In combination with ec7fee96,
this would cause advances in the DirectWrite engine to be scaled to
0, causing the QRawFont test to fail.
Conflicts:
configure
mkspecs/features/uikit/device_destinations.sh
mkspecs/features/uikit/xcodebuild.mk
src/corelib/global/qglobal.cpp
src/corelib/global/qnamespace.qdoc
src/plugins/platforms/cocoa/qcocoamenuitem.h
src/plugins/platforms/windows/qwindowsservices.cpp
src/plugins/platformthemes/gtk3/qgtk3dialoghelpers.cpp
src/plugins/platforms/windows/qwindowsfontenginedirectwrite.cpp
src/widgets/kernel/qapplication.cpp
tests/auto/widgets/dialogs/qfiledialog/tst_qfiledialog.cpp
tests/auto/widgets/dialogs/qfiledialog2/tst_qfiledialog2.cpp
Change-Id: I4656d8133da7ee9fcc84ad3f1c7950f924432d1e
All of these flags were blindly copied from Xcode and all of them are
not needed because they are unnecessary or at the very least are for no
reason specific to iOS/tvOS/watchOS.
* -fvisibility=hidden,
-fvisibility-inlines-hidden - handled in common/gcc-base.conf
* -fpascal-strings - a Mac OS Classic legacy, no one uses these
* -fmessage-length=0 - formatting option, not needed
* -fexceptions, -fasm-blocks - these are on by default and not needed
All explicitly enabled warnings are enabled by -Wall, which is handled
in common/gcc-base.conf. All explicitly disabled warnings should not be
disabled because we simply do not do this anywhere else in qmake.
Change-Id: Ifb9b2ff100837c7cf5888493a6413c972609598d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Previously we hardcoded the minimum windows version to the initial
Windows 10 release. However features have been added which require a
higher SDK version (eg drag and drop). Deploying such a package might
fail during distribution to consumer devices.
Hence introduce WINRT_MANIFEST.minVersion and
WINRT_MANIFEST.maxVersionTested as variables for the manifest file. If
nothing is specified, both values will be set to the UCRTVersion
environment variable, implying the development setup from which qmake
has been invoked.
Change-Id: I1dcf1e75c67c4ab2fd5a3fdcc32c8783a336e6ff
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is a prerequisite for properly constructed framework bundles.
On certain Apple platforms (iOS, tvOS, watchOS), bundles are used
in "shallow" format, meaning that the directory structures are
flattened compared to the one used in macOS bundles.
shallow_bundle allows the difference to be expressed independently
of the platform. Note that the term "shallow bundle" is used by
Apple in Xcode internals.
Change-Id: I1189c52b0ea66843c313783176c11cc2af97ad25
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These actually affect all UIKit platforms (tvOS, watchOS), not just iOS.
Change-Id: I2b45ebecb10d11e33d301071093b5342ce101816
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's optional but default in Xcode, and will probably become required
Change-Id: I6917a9cf15b48dbaee57f1a92ea47d68fb3c253a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
this switches all instances of LIBS[_PRIVATE] += -lfoo where a config
tests exists for foo.
this removes some code duplication between tests and project files (in
case of conditionals), and ensures that the projects always actually use
the libraries configure has found.
Change-Id: Ia7e80c8db5f329290c7f1a4e03a8bf78882a687e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
llvm-ar is not shipped as part of Xcode. Use libtool instead, just like
Xcode does.
Change-Id: Ic9c5e16c826c0d42979556f78d2cf6415542ef93
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This warning has been introduced by VS2015 Update 3 and is not in our
control as the warning happens inside the system headers. To keep the
compile output clean, disable this warning.
Change-Id: I96253538c6d6774bb91cd5a4ea80dda2910e74b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
configure
5.7 now supports clang on android; but dev re-worked configure
src/gui/kernel/qevent.h
One side renamed a parameter of a constructor; the other added an
alternate constructor on the next line. Applied the rename to both
for consistency.
tests/auto/tools/moc/tst_moc.cpp
Each side added a new test at the end.
.qmake.conf
Ignored 5.7's change to MODULE_VERSION.
configure.json
No conflict noticed by git; but changes in 5.7 were needed for the
re-worked configure to accommodate 5.7's stricter handling of C++11.
Change-Id: I9cda53836a32d7bf83828212c7ea00b1de3e09d2
Conflicts:
src/corelib/io/qtemporarydir.cpp
One side encapsulated a repeated piece of #if-ery in a local define;
the other added to the #if-ery. Made its addition to the other's.
src/corelib/kernel/qeventdispatcher_unix_p.h
One side moved some members into a struct; this collided with a #undef
check that neither side now has. Discarded the #undef part.
src/gui/opengl/qopengltexturehelper_p.h
5.7 deleted a bunch of methods; not clear why merge got confused.
src/tools/moc/moc.cpp
One added a name to the copyright header; another changed its URL.
Change-Id: I9e9032b819f030d67f1915445acf2793e98713fa
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Conflicts:
qmake/library/qmakeevaluator.cpp
One side changed the iterator to use ranged-for, the other changed its
body; they only conflicted because the latter had to add braces around
the body, intruding on the for-line. Trivial resolution.
Change-Id: Ib487bc3bd6e3c5225db15f94b9a8f6caaa33456b
This was missed in ab599a3931 when
QMAKE_STRIP was set as a side effect of adding support for separate
debug info.
Task-number: QTBUG-54212
Change-Id: I86dd040dbefec4c58879c7d029ed89dd8bad3daf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This was only used to specify XP as a target which is
not supported on 5.8 anymore. Clean up all associated
special handling in the mkspecs and pro files.
This effectively reverts change 10a0ac75.
Change-Id: I420d73002912989f1a5be961a2d09277ec4a4425
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
10586 reflects Update 1, which is the mininum supported version for many
months, hence reflext this in the manifest template as well.
There are additional features (like drag and drop) which require and
even later SDK version. However, they do not reflect the minimum.
Change-Id: I6d71dc499c928ed98c8a25283e0b53994317bb00
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add x86-64 and aarch64le QNX platforms. These platforms will be
available in QNX 7.0.
Change-Id: Iba1f635ba45fddf1a1caf907415a23a510ba0818
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
As common bsd's are using the -ffunction-sections flags from
mkspecs/common/gcc-base.conf, also use the --gc-sections ld flags
like Linux as all are using GNU ld as their linker and all are
capable of using it. The last remaining problems with --gc-sections
removing the .name sections providing the OS tags for distinction of
the execution layer were solved with NetBSD 6.0 and OpenBSD 5.4, see
http://gnats.netbsd.org/40401 and http://www.openbsd.org/plus54.html
so this option can safely be used now to reduce the size of moc and rcc
tools.
Change-Id: I74ccd4f6bc607f6d82d32fc864875f26b26bf167
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Adapt to the OS X => macOS rename in Q_OS_ macros/docs, qmake scopes,
file selectors, etc.
- Add new QSysInfo values and MAC_OS_X / __MAC_ / __IPHONE_ values for
macOS 10.12 and iOS 9.1 through 10.0.
- Update prettyProductName with new macOS "Sierra" codename.
Change-Id: Id976530beeafa01b648ebaa16f4a8f0613fcaf75
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add the strip commands for installation commonly used also on BSD
systems.
Change-Id: I4113ffa559a737ef92afb7c90ab5e1bff902b1bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
BSD OS mkspecs share mainly the same configurations except very few
differences. Merge into a common/bsd/bsd.conf file to be used across all BSD
OSes in their respective qmake.conf and add a qplatformdefs.h that contain
the common defines to be re-used in the BSD mkspecs.
The change includes the usage of <sys/param.h> also on NetBSD through the
common qplatformdefs.h, which is intended for using NetBSD's version defines.
Change-Id: Ibb0ac9e4c8bb5aff7d0febdcab1a4b9600a61117
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
- moved prf files to shared location (uikit, added to QMAKE_PLATFORM)
- prepare some formatting (unconditional blocks mostly) to add conditions later
- make device detection script more generic, passing filter strings
as a parameter and returning non-os specific variables
Change-Id: I61f2b77093304ff985bec9da04fda57ff296b16b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Use non-os specific target names in Makefiles (device as opposed to
iphoneos, simulator as opposed to iphonesimulator)
Change-Id: Ic8441c09a0e9a254e43f31b678025f16e9a1c440
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
