The top-level prepare_docs target is supposed to run before the
generate_docs target.
The repository-level targets like prepare_docs_qtbase now also run
before their respective generate targets.
To achieve that, several intermediate targets had to be introduced.
The dependencies for top-level generate_docs look like this:
/--> generate_top_level_docs_Core --\
generate_docs ---> generate_top_level_docs_Gui -----> prepare_docs
\--> ... --/
The dependencies for repo-level generate_docs_<repo> look like this:
/--> generate_repo_docs_Core
generate_docs_qtbase ---> generate_repo_docs_Gui
\--> ...
generate_repo_docs_Core --\
generate_repo_docs_Gui -----> prepare_docs_qtbase
... --/
Analoguous for qch_docs.
And last but not least, the module-level generate_docs_<module> depends
on prepare_docs_<module>, just like before.
The strangely named top-level install targets have been renamed to
install_html_docs, install_qch_docs and install_docs.
The html_docs target is now merely an alias for generate_docs.
Apart from prepare_docs, the top-level targets do not depend on the
repository-level targets anymore. Targets that are just an alias (docs,
install_docs, ...) have been re-defined to depend just on the respective
top-level targets.
Fixes: QTBUG-87758
Change-Id: I24466d3a252d518a30a2064bf876be881c46231f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add 3 new convenience custom targets:
'qt_plugins', 'qpa_plugins' and 'qpa_default_plugins'.
Additionally, if we detect that an internal executable / test
links against Gui, add a dependency on the 'qpa_default_plugins'
custom target, so that if a developer configures Qt for the first time
and then calls ninja 'tst_foo_check', we ensure the test will launch
successfully because the default QPA plugin will also be built.
Change-Id: If6dd70844b5effdf8a293f65f8785855cc85b132
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce a bunch of helper functions to manipulate compiler
flags and linker flags for the
CMAKE_<LANG>_FLAGS_<CONFIG>
and
CMAKE_<LINK_TYPE>_LINKER_FLAGS_<CONFIG>
CMake variables.
These variables can be assigned and modified either in the cache
or for a specific subdirectory scope, which will apply the flags
only to targets in that scope.
Add qt_internal_add_optimize_full_flags() function which mimics
qmake's CONFIG += optimize_full behavior.
Calling it will force usage of the '-O3' optimization flag on supported
platforms (falling back '-O2' where not supported).
Use the function for the Core and Gui subdirectories, to enable full
optimization for the respective Qt modules as it is done in the qmake
projects.
To ensure that the global qmake-like compiler flags are assigned
eveywhere,
qt_internal_set_up_config_optimizations_like_in_qmake() needs
to be called after Qt global features like optimize_size and
optimize_full are available.
This means that qtbase and its standalone tests need some special
handling in regards to when to call that function.
Task-number: QTBUG-86866
Change-Id: Ic7ac23de0265561cb06a0ba55089b6c0d3347441
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It causes issues in our Windows CI, because the strawberry perl
pkg-config is found. And even that one is unusable, due to a bug in
CMake which is tracked at
https://gitlab.kitware.com/cmake/cmake/-/issues/21239
Change-Id: I58816195d35459e8a44c923399c35a4956c222a2
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
The qt_build_internals_disable_pkg_config_if_needed function didn't
actually check if the pkg-config executable is available when turning
the pkg-config feature on.
This broke certain configurations like Android (on some hosts).
Try to find the executable and take that into account when computing
the value of the feature.
Task-number: QTBUG-85399
Change-Id: Ie79c637f2d2b689c392862c90075d309906fe506
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
There are inconsistencies in the default optimization flags added by
CMake across configurations like Release and RelWithDebInfo.
In particular Release uses -O3, whereas RelWithDebInfo uses -O2,
as well as usage of /INCREMENTAL in release configs with MSVC, etc.
To make sure that the Qt 6 binaries built with CMake are consistent
across configs, as well as consistent with the flags we used when
building Qt 5 with qmake, add a horrible search and replace mechanism
to replaces the CMake flags with what our mkspecs indicate to use.
Ideally this would be done by providing custom CMake toolchain files
for each platform we support, and we might revisit that later if the
need really arises.
To implement the replacing, we first need the flags that should be
added. Port the QMAKE_CFLAGS_OPTIMIZE variables to CMake, which is
done in QtCompilerOptimization.cmake.
Then a new function called
qt_internal_set_up_config_optimizations_like_in_qmake will look for
any kind of optimization flags set in the
CMAKE_<LANG>_FLAGS_<CONFIG> style variables, remove them, and add
the appropriate flags that qmake mkspecs provide.
On some platforms (like Windows MSVC) the function also alters the
linker CMAKE_${TYPE}_LINKER_FLAGS_<CONFIG> style variables.
The mechanism allows opting out of this replacing by
setting the QT_USE_DEFAULT_CMAKE_OPTIMIZATION_FLAGS value.
It also allows opting into removal of flags for custom configs by
providing QT_ADDITIONAL_OPTIMIZATION_FLAG_CONFIGS. It's only removal,
because we wouldn't know what kind of config it is, and thus what
flags to add.
The currently modified configs are: Release, RelWithDebInfo,
MinSizeRel, Debug aka the usual default CMake provided ones.
The mechanism is only applied to C-like languages.
ASM is not handled to be on the safe side due to not knowing what kind
of compiler flags the platform assembler might take.
It's also important to skip RC on MSVC platforms.
Task-number: QTBUG-85992
Change-Id: I3712d5cd5a34fceab54f56a6fa46b4e678952362
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
QNX doesn't come with pkg-config support.
Task-number: QTBUG-83202
Change-Id: I2ac0c014a071b83ef9a2d8114bae0e9ff9b3b422
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Qt6 package was not found the tests were configured in-tree as opposed
to standalone tests.
Use the same trick we do for building examples in-tree.
Specify the path to the build tree packages, and don't create targets.
Amends 96e3ee0659
Change-Id: Ia60de416ce0afff5bd40be8c0c6e3c7898fd7ebf
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Certain resources and compiled jar files have to be copied into the
non-prefix build dir location. They were previously only installed,
which doesn't do anything in a non-prefix build.
Change pro2cmake to generate code that places the compiled java
jars into QT_BUILD_DIR, so that non-prefix builds work.
Place the module dependencies xml files into lib folder in non-prefix
builds.
Don't special case the output and install location of the Android QPA
plugin.
Task-number: QTBUG-85399
Change-Id: I4ac9d3929ea8ecc95ec99a77e621ad2121b68832
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qmake builds of Qt don't use libraries in /usr/local because the
path is not considered a system path. Only the SDK path should be
used as a source of system libraries.
We should do the same for the CMake builds, which involves a couple of
things.
Tell CMake not to consider /usr/local (and a bunch of other
paths) as system prefix paths.
Disable pkg-config usage which by default is not used in qmake
Windows and macOS builds.
If a user wishes to use libraries located in /usr/local on macOS, they
can explicitly enable the behavior via -DFEATURE_pkg_config=ON.
In addition to enabling pkg-config, that will also disable the system
prefix modification described above.
Implementation notes
To disable pkg-config usage, we set an empty path for
PKG_CONFIG_EXECUTABLE, because there is no other good way. The
downside to this is that a lot of warning messages will be printed
that the pkg-config package can not be found.
The pkg-config feature needs to be computed in QtBuildInternals before
qtbase/src/configure.cmake, because it's too late to do it in that
file where a few qt_find_package calls already exist.
The feature value is also saved to QtBuildInternalsExtra, to make sure
that pkg-config is disabled whenever building another repo.
System prefix adjustment is done by removing paths from
CMAKE_SYSTEM_PREFIX_PATH.
Ideally we would remove also /usr as a path, to match what qmake does,
but that breaks find_program() calls for perl, python, etc.
We have to make sure that qt_find_package does not look in
PATH when looking for packages, which is the default behavior, because
PATH on macOS most likely contains /usr/local.
One last curiosity for future generations is that CMake 3.18+ has
merged a change to prioritise SDK locations over regular /usr/lib.
Fixes: QTBUG-85261
Change-Id: I28fe5bae7997507a83b37b4eb1e0188e64062c57
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A developer could write 'ninja host_tools' to build the qtbase tools
and their dependencies, and then configure another cross-compiling
build dir pointing to the previous host build. This shortens the
workflow for cross-building when working in qtbase.
Change-Id: I69e70d23ce9df8669bcadf326d0586f097e5cb21
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
CMAKE_INSTALL_PREFIX_INITIALIZED_TO_DEFAULT might be empty on the
first configuration, but because QtBuildInternalsExtra sets the
CMAKE_INSTALL_PREFIX, a second reconfiguration of a test would
stop setting the fake install prefix.
After some further consideration, there's no need to set the local
fake prefix conditionally, we can always do it (unless explicitly
opted out).
This makes sure that a reconfiguration of a test doesn't suddenly
install into the Qt prefix again.
Amends 37b132cd4e
Task-number: QTBUG-84346
Change-Id: Ic61aefe18418658455d8cdb9ebe6bcbcb8d67c99
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
And also fix qt-cmake-standalone-test to work for prefix builds.
The gist of it is that we have to protect tests not to be installed
into the Qt install prefix, but we also have to make sure that the
CMAKE_INSTALL_PREFIX is not changed globally (via cache value),
so that reconfiguration still works.
This took way too long to figure out.
Amends d6272d774c
Fixes: QTBUG-84346
Change-Id: I18c29574c9957fe05b86f701c8c14ec07e0f045b
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Aka handle CMAKE_INSTALL_PREFIX in a more relocatable way.
The following story inspired this change.
If a user wants to build a Qt repo into a different install prefix
than the usual Qt one, this will fail configuration because we
look for various things like syncqt, qdoc, etc relative to
CMAKE_INSTALL_PREFIX, which will now point to a different location
where none of the above tools are located.
The intent for such a use case is to support building Qt packages with
Conan, which sets a random install prefix when configuring a repo.
The idea is to derive the qt prefix dynamically from the
QtBuildInternals package location. Essentially it's a reverse relative
path from the QtBuildInternalsConfig.cmake file to the install prefix
that was specified when initially configuring qtbase.
Once the dynamic prefix is computed (so we know where the possibly
relocated Qt is), we can find tools like syncqt and qdoc.
This is an initial attempt to support a use case like that.
More design work will probably needed in case if tools / libs need to
be found in a location different than the Qt install prefix (so
support for multiple install prefixes / search paths).
An example of such a case would be when building qtdeclarative and
qtquickcontrols2 as Conan packages in one go. Most likely the
qmltyperegistrar tool will be located in the random install prefix
set by Conan, so building qtquickcontrols2 might fail due to not
finding the tool in the original Qt install prefix.
As to the implementation details, the change does the following:
- Dynamically computes and sets the
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX variable when
find_package()'ing QtBuildInternals. It's an absolute path
pointing to where the relocated Qt is.
- When building qtbase this variable is not yet available (due
to QtBuildInternalsExtra not existing), in that case we set
the variable to the absolute path of CMAKE_INSTALL_PREFIX
(but only for the initial qtbase configuration).
- Remove QT_BUILD_INTERNALS_ORIGINAL_INSTALL_PREFIX which was used
for standalone tests purposes. It's not needed now that we compute
the location of the Qt prefix dynamically.
- The Unixy qt-cmake and qt-cmake-private shell scripts now
use a relative path to find the toolchain file we created.
- The toolchain file also dynamically computes the location of the Qt
packages, and adds them to CMAKE_PREFIX_PATH.
- A lot of existing CMAKE_INSTALL_PREFIX uses are replaced with
QT_BUILD_INTERNALS_RELOCATABLE_INSTALL_PREFIX. This includes finding
tool locations, mkspecs dir, path environment setup for tools, etc.
- Some places still use CMAKE_PREFIX_PATH in the following cases
- When determining paths while configuring qtbase (valid cases)
- When I wasn't sure what the behavior should be, so I left them
as-is (an example is documentation generation, do we want to
install it into the random Conan prefix, or into the main prefix?
Currently it installs in the random prefix).
Note that relocating a Qt installation does not work for non-prefix /
non-installed builds, due to hardcoded paths to include directories
and libraries in generated FooTargets.cmake files.
Task-number: QTBUG-83999
Change-Id: I87d6558729db93121b1715771034b03ce3295923
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Traditionally, these make targets generated HTMLs
and QCH only. This change fixes the dependency for
these targets to ensure that behavior.
Fixes: QTBUG-83877
Change-Id: Ic7c8afe5853d33fc4cc4cfd996f87e5f65df31ed
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Previously configuration of standalone tests might have failed
due to CMake trying to create files in the /usr/local default
prefix.
Make sure to use a fake prefix in the binary dir instead,
unless another prefix is explicitly specified.
Change-Id: Icfcb32285aa5596abf1a918396b26673880a8d27
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This patch allows all the sqldrivers to be built as a standalone project.
It is not possible to build each plugin separately due to the configuration
features definition being located in the sqldriver's folder CMakeLists.txt.
In other words, the project needs to be generated from the
src/plugins/sqldrivers/CMakeLists.txt file.
Fixes: QTBUG-82962
Change-Id: If41c7e3827589391830a894a9c998d2e56239562
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This patch adds a publicly callable qt6_add_plugin() API to create
plugins. This API is meant to cover cases such as the plugandpaint
example.
This patch also renames qt_add_plugin to qt_internal_add_plugin in order
to avoid clashes with the public API. To avoid breaking the existing
projects, a compatibility wrapper function is enabled by default unless
QT_DISABLE_QT_ADD_PLUGIN_COMPATIBILITY is specified.
Fixes: QTBUG-82961
Change-Id: If5b564a8406c90434f1bdad0b8df76d3e6626b5f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We don't want people accidentally installing tests into the
Qt prefix.
Change-Id: Ic99492559875f753897a83af162253cac846a8a5
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Instead of using CMAKE_INSTALL_RPATH to embed an absolute path
to prefix/libdir into all targets, use the more sophisticated aproach
that qmake does.
For certain targets (modules, plugins, tools) use relative rpaths.
Otherwise embed absolute paths (examples, regular binaries).
Installed tests currently have no rpaths.
On certain platforms rpaths are not used (Windows, Android,
iOS / uikit).
Frameworks, app bundles and shallow bundles should also be handled
correctly.
Additional rpaths can be provided via QT_EXTRA_RPATHS variable
(similar to the -R option that configure takes).
Automatic embedding can be disabled either via QT_FEATURE_rpath=OFF
or QT_DISABLE_RPATH=ON.
Note that installed examples are not relocatable at the moment (due
to always having an absolute path rpath), so this is a missing feature
compared to qmake. This is due to missing information on where
examples will be installed, so a relative rpath can not be computed.
By default a Qt installation is relocatable, so there is no need to
pass -DQT_EXTRA_RPATHS=. like Coin used to do with qmake e.g. -R .
Relative rpaths will have the appropriate 'relative base' prefixed
to them (e.g $ORIGIN on linux and @loader_path on darwin platforms).
There is currently no support for other platforms that might have a
different 'relative base' than the ones mentioned above.
Any extra rpaths are saved to BuildInternalsExtra which are re-used
when building other repositories.
configurejson2cmake modified to include correct conditions for the
rpath feature.
It's very likely that we will need a new qt_add_internal_app()
function for gui apps that are to be installed to prefix/bin.
For example for Assistant from qttools. Currently such apps
use qt_add_executable().
The distinction is necessary to make sure that relative rpaths are
embedded into apps, but not executables (which tests are part of).
Amends e835a6853b
Task-number: QTBUG-83497
Change-Id: I3510f63c0a59489741116cc8ec3ef6a0a7704f25
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
On Android, check_language() reports that the languages are supported,
but enable_language fails afterwards.
On Linux it causes issues with the PCH. The PCH file might contain
a Clang pragma, even though the C++ compiler is GCC. Presumably due
to finding a Clang Objective-C compiler.
Change-Id: I1b4c54459772c089e7f6350872c87af52ad72a37
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Starting with CMake 3.18, there is PCH support for darwin multi-arch
builds, like iOS simulator_and_device builds.
Also enable PCH for Objective-C++ files when the support is there.
To enable PCH for Objective-C++, we need to do enable the OBJCXX
language as well, but conditionally, because on non-darwin platforms
the language is probably not available.
Introduce the qt_enable_cmake_languages() macro which is called
automatically by qt_build_repo_begin().
Change-Id: I0e7f44be6577ac54ce940470036626409920e272
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Before this patch there were a few ways to build tests
- Configure all tests as part of the repo build
- Configure all tests as part of the repo build, but don't build
tests by default (-DQT_NO_MAKE_TESTS=ON)
- Configure all tests as a standalone project in a separate build
dir using -QT_BUILD_STANDALONE_TESTS=ON
All of the above incur some time overhead due to the necessity
of configuring all tests.
Sometimes you just want to build ONE test (or a few).
To facilitate that use case, a new shell script called
bin/qt-cmake-standalone-test(.bat) can now be used to configure
and build one or more tests.
The script takes one single argument pointing to the desired test
project path and configures a generic template project that sets up
all the necessary Qt CMake private API, afterwards calling
add_subdirectory on the passed in project.
Example
$ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image/qicon
or
$ path/to/qt/bin/qt-cmake-standalone-test ./tests/auto/gui/image
After that, simply run 'ninja && ctest' to build and run the test(s).
This is the CMake equivalent of calling qmake on a test .pro file
(or on a tests SUBDIRS .pro file)
There are 3 details worth mentioning.
Due to the add_subdirectory call, the built artifacts will not
be in the top-level build dir, but rather in a nested build_dir.
The script currently can't handle more than one argument
(the path to the project), so you can't pass additional
-DFoo=bar arguments.
If a test uses a 3rd party library (like Threads::Threads)
which was not a public dependency for any of the Qt modules,
configuration will fail saying that the target was not found.
Perhaps we should consider recording these packages when
generating the StandaloneConfig.cmake files.
Change-Id: Icde6ecb839341d34f341d9a19402c91196ed5aa0
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously you could use either module-specific or
repo-specific 'docs' targets.
For example 'ninja html_docs_qtbase' or 'ninja html_docs_Core'.
Now there's a global / top-level target called
'docs', so 'ninja docs' works.
For super builds it will build the documentation of all
configured repositories.
For a single repo build, it's equivalent to calling
'ninja docs_repo_name'.
Also for consistency, add the "docs_Core" target, which was missing
before. So now a 'docs' target exsits for repo names AND targets.
New global target names are
- docs
- prepare_docs
- generate_docs
- html_docs
- qch_docs
- install_html_docs_docs
- install_qch_docs_docs
- install_docs_docs
Amends 0095ff4e06
Change-Id: I686be1e0962e40cbce860e8ac2cabb056b360ac2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Uncovered while building qtdeclarative.
Change-Id: If1a36f2640a3a5d765e7ca74b0ba1d39ef2a18f0
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Teaches configurejson2cmake about summaries / reports, so things
like enabled features, configure sections, notes, etc.
Add relevant CMake API for adding summary sections and entries,
as well as configure reports. The commands record the passed data,
and the data is later evaluated when the summary needs to be printed.
This is needed, to ensure that all features are evaluated by the
time the summary is printed.
Some report and summary entries are not generated if they mention a
feature that is explicitly exclduded by configurejson2cmake's feature
mapping dictionary. This is to prevent CMake from failing at configure
time when trying to evaluate an unknown feature. We should re-enable
these in the future.
A few custom report types are skipped by configurejson2cmake (like
values of qmake CONFIG or buildParts).
These will have to be addressed a case-by-case basis if still needed.
Change-Id: I95d74ce34734d347681905f15a781f64b5bd5edc
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Before the patch we set the standard flags in two places:
- once when building qtbase
- and always when including QtSetup (for every repo that is built)
This change makes sure to also set the correct standards flag when
building standalone tests, because QtSetup is called to early in
that case.
Change-Id: Iad130b731e9eb9605bb91637364c33fdd49ce3cb
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
Adds custom targets which take care of generating and installing
documentation files.
Every module has a global set of targets suffixed with the module
name in order for them to be unique when we implement super builds.
The targets are the same as the list below, but replace ${target}
with the module's name. Eg.: docs_qtbase.
For every target which has an qt_add_docs() call, we now create the
following set of custom targets:
* docs_${target}
* html_docs_${target}
* qch_docs_${target}
* prepare_docs_${target}
* generate_docs_${target}
* install_docs_${target}
* install_html_docs_${target}
* install_qch_docs_${target}
Fixes: QTBUG-75859
Change-Id: Ie84cb9a2dedbe7333d9a84f4d73383442deca477
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Some repos like qtimageformats don't generate a config file for
standalone tests because the repo creates no modules.
Amends de3a806def
Change-Id: Id42338804605a883f975feb5dd81eda5acc6e687
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
A developer can pass either -DQT_NO_MAKE_TESTS=ON or
-DQT_NO_MAKE_EXAMPLES=ON to exclude tests or examples from being built
as part the default make target (when you write just make or ninja).
With ninja, tests and examples can be built separately one by one,
by typing
$ ninja tst_foo
or
$ ninja example_bar
Same can be done with the Makefile generator.
$ make tst_foo
All tests / examples can be built in one go by typing
$ ninja tests/all
or
$ ninja examples/all
With the Makefile generator unfortunately it's not as nice and is most
likely an implementation detail, but it can still be done by running
something like
$ make -f CMakeFiles/Makefile2 tests/all
or
$ make -f CMakeFiles/Makefile2 examples/all
Change-Id: I34f168b3ab41e952a21d3ace5634e25a9f41922e
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Previously repo/tests/CMakeLists.txt was a standalone project on which
CMake could be called. This was useful for Coin to be able to build
and package only tests, but was a bit troublesome because that means
having to specify the usual boilerplate like minimum CMake version,
which packages to find in every tests.pro project.
Instead of having a separate standalone project, modify the top level
project and associated CMake code to allow passing a special
QT_BUILD_STANDALONE_TESTS variable, which causes the top level project
to build only tests, and find Qt in the previously installed qt
location.
This also means that when building a repo, we generate a
${repo_name}TestsConfig.cmake file which does find_package on all the
modules that have been built as part of that repo. So that when
standalone tests bare built for that repo, the modules are
automatically found.
qt_set_up_standalone_tests_build() is modified to be a no-op because
it is not needed anymore. Its usage should be removed from all the
other repos, and then removed from qtbase.
Non-adjusted tests/CMakeLists.txt projects in other repositories
should still be buildable with the current code, until they are updated
to the new format.
Adjust the Coin build instructions to build the standalone tests in a
separate directory.
Adjust pro2cmake to generate new structure for the tests/tests.pro
projects.
Adjust the qtbase tests project.
Fixes: QTBUG-79239
Change-Id: Ib4b66bc772d8876cdcbae1e90ce5a5a5234fa675
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Don't call qt_android_dependencies for interface libraries.
Also make sure not to set properties which don't start with
INTERFACE_ prefix.
Change-Id: I0afdffd34c9aebe0d7ac4731b57dd4d505f84570
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Convert benchmark executables to add_qt_benchmark().
Currently add_qt_benchmark just calls add_qt_executable() and
ensures that it they build under CMAKE_CURRENT_BUILD_DIR and do not
install.
Add QT_BUILD_BENCHMARKS option to enable/disable building of benchmarks.
Change-Id: Id0bc676698d21d50048d97d9abef51d92ccb6638
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is needed because the ported over requires() clauses from qmake
to CMake are executed before qt_repo_build(), which means that all the
custom platform variables that we set (like LINUX, APPLE_OSX) need
to be available immediately after finding BuildInternals.
Change-Id: I7345b69edf72c266508846766e64f42c99862d1d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is useful for providing private CMake API which is not part of
QtBase. Also, fix the setup files to be included when building
standalone tests. The old ${PROJECT_NAME}Setup.cmake file inclusion will
be removed once all usages are adjusted.
Prompted-by: Alexandru Croitor <alexandru.croitor@qt.io>
Change-Id: I5bc2bca7371660c00b0301e94d025a29b68d6975
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
To build examples as part of a non-installed Qt prefix build,
not-yet-installed Config files need to be found by find_package()
calls inside example projects.
Facilitate that by propagating the CMAKE_PREFIX_PATH and
QT_EXAMPLES_CMAKE_PREFIX_PATH paths in all relevant find_package()
calls where NO_DEFAULT_PATH is used.
Also adjust the inclusion of the QtFeature.cmake file to be relative
to the qt6 directory, rather than the current list directory.
This is needed to successfully find the file when parsing a Config
file from a non-installed build directory.
Change-Id: I36031279628f1f7741d8f4d7571484a6545227f7
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Otherwise we get errors like the following in non-gui projects:
Error evaluating generator expression:
$<TARGET_FILE:Qt6::uic>
No target "Qt6::uic"
Change-Id: I8a3a6f8ec5e5c1c3d1f73369c5739a321c64bfbb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is similar to how we show the instructions when configuring
in qmake land.
Change-Id: Iabd28acc3d74fd0175eab812a412744dac89e6f6
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is similar to qmake, where the .prf files from the source
location of qtbase/mkspecs are used in a non-prefix build.
This means that if a developer changes the source QtBuild.cmake,
and then runs make in qtdeclarative, cmake will reconfigure
qtdeclarative because the timestamp of QtBuild.cmake changed.
Before this change you first had to make && make install in the
qtbase build directory, before qtdeclarative saw the modified
QtBuild.cmake.
This change also makes the module paths be prepended to
CMAKE_MODULE_PATH instead of appended, which means they will
take precedence to any path provided via command line.
Change-Id: I9178d5183a95b3b67bfe1b1fe91d3d3371ffe5c5
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Do not build examples in static builds as they are not prepared
for this configuration.
Change-Id: Ia0fd0a6cdfa3733bf13eb2ca8398668f26c0bedf
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Update Android build configuration to be compatible with the multi-arch
android build patch to qmake. We can now build and generate the apk
correctly. Executing on the device/simulator will only work once the
latest changes from 5.14 have been merged in.
We now replace target suffix with ${CMAKE_ANDROID_ARCH_ABI}.[so|a] so
we don't have to deal with handling targets which might have any of the
OUTPUT_NAME properties set.
The dependency and deploy settings generation has also been updated to
append the file contents to a string and then do a single file write
at the end.
Change-Id: Id3c5bd0428141ecaf962124a100390e3a4e41feb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add missing qml root path variable in the deployment configuration file.
Not having this variable will cause androiddeployqt not use the
qml dependency scanner to package all relevant dependencies.
This patch also fixes QT_ANDROID_BUNDLED_FILES files not being
processed.
Change-Id: I5bca33cdbb57098f283b38516b777571806da9e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
