Make styleHints a static member variable of QGuiApplicationPrivate and
fix accessor accordingly. Extend tst_QApplication::settableStyleHints()
to run without QApplication instance as well and add a similar test
to QGuiApplication.
Task-number: QTBUG-44499
Change-Id: I42b92ef38f7dd512d08d70accfa7dd4f09a22f01
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Currently Qt uses the QPlatformIntegration::StyleHint
SynthesizeMouseFromTouchEvents to check whether to synthesize mouse
events from touch events. But not only platform plugins can produce
touch events, they can be created by e.g. QTest::touchEvent() and in
this case we almost definitely need synthesizing regardless of the
platform.
This commit introduces a QTouchDevice::MouseEmulation capability which
replaces use of the QPlatformIntegration::SynthesizeMouseFromTouchEvents.
So it's possible to pass QTouchDevice without this capability to
QTest::touchEvent() and be sure that mouse events will be synthesized.
Notice that touch pads always emulate mouse events.
As a result we can activate some tests which were disabled for specific
platform configurations by commits 6c1670d8c2
and e9760f1559.
Change-Id: Idc82fa4007a095fc1cb5934979361b0023d2b793
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
We must do something when requestUpdate() is called on a QWidgetWindow.
The semantics of UpdateRequest for QWindow and QWidget are unfortunately
different: for widgets an UpdateRequest means "sync the backing store".
For QWindow it also involves marking as dirty.
Change-Id: Idf40b3fc0873652dc081edeb12c96b3007a126ef
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
QPlatformTheme::keyBindings() performs a binary search
into an ordered list of StandardKey -> Key Sequence
mappings where each StandardKey can have multiple
key sequences.
Previously the order of the Key Sequences in the
returned list would be indeterministic and, except
for the designated pri-1 key sequence, would not
necessarily correspond to the list order. (The
ordering was dependent on where the binary search
"hits", which again depends on the size of the list.)
This caused trouble when adding mappings, since it
would change the order in the returned key sequence
list for existing mappings and confusingly cause
(apparently) unrelated test failures.
Fix this by replacing the manually coded binary search
with std::equal_range.
One test case needed to be fixed up because it had the
result in the wrong order (verified by looking at
QPlatformTheme::keyBindings).
Change-Id: I555ca2736b1a8e6454dc79645a8246f80119cfc2
Done-with: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Behavior will agree with the docs.
[ChangeLog][QtGui][QWindow] lastWindowClosed will be emitted even if
quitOnLastWindowClosed is not set
Task-number: QTBUG-32956
Change-Id: I7bb269d53894859fee27e171eea7ad472ea86af0
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Our theory for the failure of framePosition() not having the expected
value after setFramePosition towards the end of the test is that we try
to call setFramePosition() while the getting-back-from-fullscreen-to-normal
window animation is still running, at which point the compositor may
just choose to ignore our move request.
Similarly to when going fullscreen, also wait when coming back from it.
Change-Id: Icfc92f277d96dccdfad772c4aac252b2a20c6196
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
The test still fails sporadically at a new place, so this adds some
debug information when it fails to may help us identify what is going
wrong.
Change-Id: Ife0f171299ef7e800a2d808602e76ca2f3885964
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
The part of the test that verifies that setFramePosition moves the window
successfully appears to be very unreliable in the CI system. The "tested"
frame position is calculated to be at (40, 40) relative to the top left
of the available screen geometry, which can be non-zero due to task bars
and similar system ui elements. However that position appears to be
unreliable in the sense that the window manager doesn't seem to always
respect that. So instead let's try placing the window (by frame position)
in the center of the screen instead.
Change-Id: I96fe6c37e748fc18262632b5effe5a9e90dc0028
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Don't check for absolute counts of resize events but just check if we
were resized. Also use QTest::qWaitForWindowExposed instead of QTRY_COMPARE
and checking for QEvent::Expose.
Change-Id: Ie383493a8ce6d88cad50bd6375d432ad1578449c
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
These synchronously delivered events allow applications to correctly
and conveniently handle native platform surfaces being destroyed. This
is particularly useful when doing rendering on a non-gui thread as it
allows to shutdown rendering before the native surface gets destroyed
from under us.
Task-number: QTBUG-42476
Task-number: QTBUG-42483
Change-Id: I63f41bbdb32f281d0f3b8ec2537eb2b0361f3bb3
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
The setMimeData() function is documented to take ownership of
the object passed in, but in the case where the platform
plugin did not support the requested mode, we would simply
return without deleting the object nor telling the application,
so it would cause a potential memory leak. We need to honor the
contract, even when we fail to set the mime data.
Test was updated to avoid verifying the leak in cases where
the platform does not support all modes.
[ChangeLog][QtGui][Clipboard] Fixed a memory leak in setMimeData()
when the platform plugin did not support the requested mode.
Task-number: QTBUG-41852
Change-Id: I2112da1613199fe1b56724e7ccf097b9e912c117
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
In some CI configurations this fails from time to time. Have to disable
it unless we can make it more robust somehow.
Change-Id: Iadd8904d7223a6aeff53dafa36b94df3f60e1ad8
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
Takes the total time for this test from ~1.2 seconds to ~0.42 seconds for me.
Change-Id: I426e600a7afe01d7343108b432eda8b83d6f3d85
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QExposeEvent::region() reports a region in a random coordinate system.
The behavior is undocumented and the platform plugins do different things.
xcb, offscreen and ios are correct. These set the region in local coordinates,
which is the most logical interpretation of the expose region.
windows is almost correct, except for one occurrence.
cocoa and others need changes: passing in geometry() as the exposed region is
always wrong.
The patch documents the expected behavior both for QExposeEvent and
internally in QWindowSystemInterface. The problematic plugins are fixed to
use local coordinates.
Task-number: QTBUG-40470
Change-Id: I6ded3154d14254fa71d4292d8e1b5e6cf696c81a
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Instead of abusing inheritance to provide convenience constructors,
use simple inline constructor functions. The name got a lower-case
q to indicate a free function. The usual fromXYZ() static methods
were deemed not fitting in this case in the initial round of review,
since they implied some kind of conversion while these functions are
simply constructors of formsts, which contain no data.
This also solves the problem that some of these ctors could have been
called with just one argument and were therefore candidates for hidden
QPixelFormat temporary injection.
QPixelFormatRgb was renamed to qPixelFormatRgba to explain the third
argument at the call site better.
There seem to be no users of this class in qt5.git at this time.
Change-Id: Ib4fe8ceb2d30744127b116a748724a3406400eb8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It isn't a thorough check of all the mutable methods for detaching, but a start.
Change-Id: I523fd30d3459186654e12fd25c384ed990ab7a00
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
As with many other implicitly shared classes, efficient move semantics
requires setting the d-pointer to nullptr, which then needs to be checked
for in the dtor and the copy assignment operator.
Change-Id: I654d181a1dfdd9a16e2f9fb96b57475cdd0b4561
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
A simple convenience class providing a QWindow that has a
paintEvent and supports opening a painter on itself. It
behaves exactly like QOpenGLWindow in this respect, which is not
surprising since they share the same base class (QPaintDeviceWindow).
QRasterWindow does not however have any OpenGL dependencies and will
be present in -no-opengl builds too.
[ChangeLog] Added QRasterWindow, a thin convenience wrapper for a
QWindow on which a QPainter can be opened.
Done-with: Jorgen Lind <jorgen.lind@digia.com>
Change-Id: I37e82720492945d7b85d5f713eea8d5f7556e511
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
[ChangeLog] Added QOpenGLWindow. This serves as a convenience class for
creating windows showing OpenGL content via an API similar to QGLWidget
and without any widget dependencies.
Done-with: Jorgen Lind <jorgen.lind@digia.com>
Task-number: QTBUG-36899
Change-Id: I52e9bc61acb129dbfd3841b3adeffab2dbcf7f05
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Use sizes relative to the test window size; move windows relative
to the top left point of the available screen geometry.
The test now passes on Windows using a 4K monitor.
Task-number: QTBUG-38858
Change-Id: Ia8d992f2a9bfa1cb1deacaf918ed0cfff7616959
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Remove old message handler hack as we have a new and better api to
ignore warning messages.
Change-Id: Id967b2672fe3e3638db9977500118a19c2afb730
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Support CF_DIBV5 for these images so that transparency is preserved.
Task-number: QTBUG-11463
Change-Id: I51881ae8bfbd05b92abd309766f4da9a7ea26c2d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This allows QQuickSystemPalette to listen to palette changes without
installing an expensive event filter on the application object.
Change-Id: I8b693e047d993c444e393d7a714a5709692c3560
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Use SetWindowPlacement() to set the normal position when applicable
as is done in Qt 4.
Task-number: QTBUG-39544
Change-Id: Ia158b968ea15361d9937619f07b56eb8a0312a13
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This allows QQuickApplication to listen to layout direction changes
without installing an expensive event filter on the application object.
Change-Id: I2d7d8906acecbc092657c4bd918bbdc9aad9744c
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
beginModalSessionForWindow will center the window and ignore
the set geometry. So to workaround this it checks the new value
against the old one and moves it back if need be.
Change-Id: I38bc74c04138992f2e0570fca666414025aeeba8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The currently used clipboard chain API has various problems with non-
responsive applications and requires checks for hung/debugged applications when
sending on notifications.
The new clipboard format listener API available from Windows Vista onwards
requires less code and does not have these problems, however the change
notifications now arrive asynchronously.
Change the tst_qclipboard to be able to deal with asynchronous change
notifications.
Task-number: QTBUG-38670
Task-number: QTBUG-33492
Change-Id: I3c49e346a34310431c20f3051d12eaabf330a3ad
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
[ChangeLog][QtGui][QGuiApplication] Add support for -icon command line
argument on X11, add -qwindowicon on all platforms.
Change-Id: Iacc602466699bf634d8b34aab7ed73c83fd9844f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Its purpose in life will be to describe pixel formats
[ChangeLog][QtGui] Added QPixelFormat class
Change-Id: I74d8f974606520efb3935110ff3d6ddb5ea805a8
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
On QNX a window can only be activated if it has either a egl surface
or a raster backingstore.
Change-Id: If075093e39f1553eb8b25e35f7d372b1b15aa8af
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
