Given a member function that's a signal, returns the corresponding
QMetaMethod. Inspired by the implementation of the template-based
QObject::connect().
The primary use case for this function is to have an effective and
exact (not subject to shadowing) way of checking whether a known
signal was connected to in reimplementations of
QObject::connectNotify(QMetaMethod), avoiding string comparisons.
Example:
void MyObject::connectNotify(const QMetaMethod &signal)
{
if (signal == QMetaMethod::fromSignal(&MyObject::mySignal)) {
// Someone connected to mySignal ...
}
}
Change-Id: I5e4de434275fe543c004d569dcaa9ceda3442f03
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Instead of allocating and reading the entire image and then scaling it
down, this code reads only one line at a time and scales it on the
fly.
Change-Id: I61fde307146c11dcd90ca617cc2e7f85dd3b66c4
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This autotest passes when run alone, but sometimes fails when run
concurrently with other tests.
Change-Id: I327de7f4a9f8af385351e4c6b09a57311efd6eb6
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
QFontDialog and QColorDialog were ignoring the DontUseNativeDialog. This
lead to a native (Cocoa) dialog created all the time.
Fix the testcase for QFontDialog. It needs the DontUseNativeDialog flag
set.
Task-number: QTBUG-24321
Change-Id: I159c1ad057bac38226f1e01a56b15f142650bfd8
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
cmake was installed on CI macs _after_ this test was added, causing the
test to block unrelated changes. Temporarily disable it as previously
agreed with Stephen Kelly.
Change-Id: I079c0016a5e4a9a03ee1a0bae9a2e836c6b985d6
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
It no longer requires hardcoded configuration, and it passes on
linux, mac 10.6 and windows desktops
Change-Id: Ibaa63520dade58ce13c23cf2aba3ddbc5be1c472
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Also remove some code which has been unused since it was introduced in
32182d107fa75e5619ecc91a81f50626f429ebe1
Task-number: QTBUG-25140
Change-Id: Ic7053d68d8200f845c1ae330342d27af7275e057
Reviewed-by: Tarja Sundqvist <tarja.sundqvist@digia.com>
Reviewed-by: David Faure <faure@kde.org>
Known failures in this test are now handled by QEXPECT_FAIL.
Task-number: QTBUG-24796
Change-Id: I12ba57370cf3df1a85a108fbbcdc9db2222491c1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Unlike path(), toLocalFile() isn't reporting a URL component, so it
should decode the percent-encoded characters fully. This extra
decoding pass is meant to catch %00 to %1F, %7F and %25 (the percent
sign itself).
It also catches %80 to %FF, which aren't decoded because they don't
form UTF-8 sequences. That means QUrl::toLocalFile() has undefined
behaviour if the path contained non-UTF8 sequences.
Task-number: QTBUG-25459
Change-Id: Iab5a0ba6afcfc4510e297984f2ffc208cedd752b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Can't use style name with Windows native font engine, so do the
comparison using style in case multipleRawFontsFromData().
Also XFAILed the advances() case when using Freetype font engine in
Windows, as some of the advances returned are one pixel wider than
expected.
Task-number: QTBUG-24197
Change-Id: Ib5fecd83a93908e57a4c82ffb5495a92474ce45a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QMetaObjectExtraData was added when support for QMetaObject::newInstance
was added. One needed a place to put the pointer to static_metacall in
the QMetaObject.
But as we break binary compatibility, one can change the size of
QMetaObject, and put everything back inside QMetaObject's own structure.
Meaning it is not required anymore to have one QMetaObjectExtraData
instance per QMetaObject anymore.
Change-Id: If0b8f586cbaf633eed10045adee3ba3366826c86
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This is done in preparation of introducing the
QObject::connectNotify(QMetaMethod) function. Together with the
forthcoming QMetaMethod::fromSignal() function, which returns the
QMetaMethod corresponding to a Qt/C++ signal (member function), the
comparison operators provide an effective way of checking which
signal was connected to.
Change-Id: I2de48628c4884a7174fb8574895f272cb3fe5634
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The buildkey support was removed in 7493ee1c44. This commit removed
PI_BuildKey and most of the usages from the code.
Change-Id: I971d68cd4377c358381983c1edcb98360936b698
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This test hangs in CI, but so far I've been unable to reproduce the
problem. Disable the test for now so that this test does not block
changes that bring in needed functionality.
Task-number: QTBUG-25496
Change-Id: I81faa574b6d7bcab2e32becc2af0f71006c7dd9c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Instead of trying to return whether the URL is relative to something
undefined, let's instead follow what the documentation was saying all
along and what the RFC says about "Relative References".
Change-Id: I32722321a6b36c6e3480669ad769390e4c6f7d1c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Previously, the CI system has not been testing on Windows with the
-developer-build configure flag. Mark known failures for this
configuration so that tests can be run in enforcing mode.
Change-Id: I5fbbbe09a7b400d626107c66dcbd5c5469a45b20
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QLatin1Literal is just a typedef of QLatin1String.
Change-Id: If20ca225e57a7fb45a7775f0fc81aedb6da88c96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QUrl::path() already decodes almost everything, but let's pass the
formatting flag to be sure.
Note: decoding of control characters from U+0001 to U+001F is not
implemented. Non-UTF8 sequences are also not representable.
Change-Id: I9a0ae2282ec3d48cc0e70e5b2d3824fb120709ed
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
QRegExp matching methods modify the object, which we don't want to. In
particular, when we receive a QRegExp from the user or we store in a
context that might require thread-safety, make sure we make a copy
before using it.
QRegularExpression has no such shortcoming.
Task-number: QTBUG-25064
Change-Id: If119e06221ca99e57c5ad1a1d4cc6468e9f68c7b
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
It's perfectly valid to have a path of /c:/a.txt on Unix, so don't
strip the leading slash unless we're on Windows.
Task-number: QTBUG-20322
Change-Id: I721bd0a65b41048bc735d4eaa0d536174164fe64
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Since this test began to run again on Mac, it has been passing
consistently.
Task-number: QTBUG-22748
Change-Id: Ia81cf60b11d45fb331b5eca5d13df00556c18e07
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Declarative used to have some issues when the MouseArea event handlers
spinned the event loop: subsequent mouse events were all lost. Let's
add an autotest also for QGuiApplication to make sure the same problem
won't occur there.
Change-Id: If5c3b4f58dad609efb302d2ca932493680ffdf13
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
It's not enough to check for UNIX because Qt may have been configured
without dbus, or we could be running on APPLE (on which DBus is not
commonly installed).
Change-Id: Ic57200dad42c0c12b292d1066f799c827294fe9a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Switch on most of the tests (all but the bearer tests), marking the two
known failures as insignificant tests.
Change-Id: I17f228a938de1a23eddf897f494bfa4e54338dae
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This test had two stable failures, caused by including code not meant
for Windows.
Task-number: QTBUG-25298
Change-Id: I43d9d62ecf5a3c6eec240fafbc43a625c00f45fa
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This test has only stable failures. Mark those failures with
QEXPECT_FAIL and re-enable the test.
Task-number: QTBUG-25296
Change-Id: I5615700ec8119a827c30e43ae651a684e78170fe
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
- Specify main.cpp with full path to avoid obscure link
errors (grabbing main.cpp from windowflags)
- Set proper flags on the test window.
Change-Id: I9bbaf9cb5c7e210f53a51b58bd48a827d6104fe2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This test only has stable failures. Mark those with QEXPECT_FAIL and
re-enable the test.
Task-number: QTBUG-23674
Change-Id: I0e6cfe4f1992410bbc27b266f7bdafa14451aff7
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The test has one stable failure. Mark it with QEXPECT_FAIL and
re-enable the test.
Task-number: QTBUG-23681
Change-Id: Iade17cbbd1570863bb628572d8da52ec9c0f62ba
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test function recently became unstable in parallel with the change
to re-enable the test. Skip the unstable function until it can be
fixed.
Change-Id: I0fb962aa3294a0c9b799acee52ab1fb1cd1c6924
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This test has only stable failures on Mac. Mark those failures with
QEXPECT_FAIL and re-enable the test.
Task-number: QTBUG-25298
Change-Id: I1c768226dfeb9307386e8853091baa68936bed29
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Previously the method attempted to reset only as a last resort.
Now reset() is deprecated and resetting must happen between emitting
modelAboutToBeReset() and modelReset(). Since this suffices in all
cases to notify views that they must reinterrogate the model, it is no
longer necessary to signal explicitly row removals and insertions
within the scope of the reset.
Additionally, fetchMore() is now called within the scope of the reset
so insert signals do not have to be emitted here either.
This improved handling of resetting in QSqlQueryModel also allows the
cache in QSqlTableModel to be cleared directly at select().
This change may actually allow views to operate more efficiently since
they no longer have to react to separate row removal and insert
signals. Views can avoid pointless deallocation and reallocation
by considering row count only after the reset is finished. The cost is
that the columns and horizontal headers must be considered in the view
at each setQuery() call. In any case, it is not clear that trying to
be smart about this in the model justifies additional complexity.
Tests had to be adjusted where they expected explicit row removal
and insert signals.
Change-Id: I4f7eac1419824361d7d9bdcc6a87092b33e80d7a
Task-Id: QTBUG-25419
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
This will allow the CI system to run the tests. The tests are only
run if cmake is found.
Change-Id: Ie73a56114c151871160bafcbf0b90b2d54620855
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
These tests were disabled when trying to get CI working on Mac OS
because they asserted or crashed. Now that CI is working well on Mac
OS, start running these tests again, initially as insignificant tests.
CI results will then be used to determine whether the tests can be made
significant.
Change-Id: Ife411e6b8c84ade45c865ef35f3ae0071d6f8d2b
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
On Windows, the test had a stable failure and an XPASS related to an
already closed bug report. On Mac, the test had one stable failure, on
the same statement that had the XPASS on Windows. On Ubuntu, the test
has been passing consistently.
Mark the stable failures with QEXPECT_FAIL, remove the QEXPECT_FAIL that
causes the XPASS, and remove the insignificant_test markers to re-enable
the test.
Task-number: QTBUG-24296
Change-Id: I05dd16b39296919268fee216332929df591f2b66
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Calling peek() for qsslsocket caused socket data to be copied into
qiodevices buffer and therefore make it unaccessible in qsslsocket.
Cherry picked form 4.8-branch & modified to Qt5 API changes
(int -> qintptr)
Original commits:
commit 621f18955082fc73471e75d1f8c35c2dcd4befeb
Author: Shane Kearns <ext-shane.2.kearns@nokia.com>
commit 68b1d5c17aa38d5921bdade2b0e0cb67c6c90513
Author: Kalle Viironen <kalle.viironen@digia.com>
Task-number: QTBUG-18498
Change-Id: I6be4b19baec2f3197537f5e7b61432040ec84ad2
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test was marked insignficiant on Ubuntu 11.10, but the only failure
was an XPASS. Make the test significant again, and only include the
QEXPECT_FAIL for CI platforms where the test is known to fail, i.e.
Windows and Ubuntu 10.04.
Task-number: QTBUG-20778
Change-Id: I24af3dab45118758382ba03c8c7a310f16301f8c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test has three stable failures on Windows. Mark those failures
with QEXPECT_FAIL and re-enable the test.
Task-number: QTBUG-24294
Change-Id: I9eee2701a228912c3a91fa730e712661fb93add6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Until March 15, 2012, this test failed consistently on Mac and passed
on other platforms. Since then, the test has passed consistently on all
platforms.
Change-Id: Ie773643a1c9dc0ab3596786badbc3c3afd4824d6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Compile fix for tst_qtextscriptengine.cpp test on the mac.
Change-Id: I912a339c6c659dc8958cc5997a331e3c18c9cb06
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
I had missed these, apparently.
Task-number: QTBUG-23274
Change-Id: I6455dc34b18ec9cefccfe527b3fd3ad34fb61aa3
Reviewed-by: Lorn Potter <lorn.potter@nokia.com>
Change-Id: I87918276987b3a506c2ac8556940fce89a2d20cd
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These warnings are expected and correct, so ignore them.
Change-Id: I43931950e46bd3c931db869902574ee7219efa1d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Adjust the test because we don't read past the end anymore.
Task-number: QTBUG-25108
Change-Id: I8243f1d5ae79d1256aab2cb1132598a716a7eeeb
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
If the "bypass proxy for local addresses" option is enabled in
the windows proxy configuration, then do not use the proxy for
any IP address in the subnet of any network interface.
As the systemProxyForQuery api is now offering HTTP proxy tunnels
for TCP sockets, this change avoids local ad-hoc network
connections being routed through the proxy.
In the case where the local address was on a different interface to
the proxy server, it may have been unreachable through the proxy.
For example IP over USB or Bluetooth.
Change-Id: I0842732832a7795112be029d923ed168edc008d6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
