1) To describe a protocol version we should use an "ordinary" name,
not use the values out of the QSsl::SslProtocol enum.
2) Say that we support the latest stable TLS version (1.2, not 1.0).
3) Fix a statement about which protocol is the default one.
Change-Id: I18732914d55060a0c3920f7082f986c262a71ded
Reviewed-by: André Klitzing <aklitzing@gmail.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
10586 reflects Update 1, which is the mininum supported version for many
months, hence reflext this in the manifest template as well.
There are additional features (like drag and drop) which require and
even later SDK version. However, they do not reflect the minimum.
Change-Id: I6d71dc499c928ed98c8a25283e0b53994317bb00
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Restore code path returning the resource pixmap for platforms
that do not have themes in QCommonStyle.
Amends change b657496a0b.
Task-number: QTBUG-54425
Change-Id: I764408622b825b86afbe7ccf37e1498d3efb3850
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
It could be reached when QT_BOOTSTRAPPED was defined.
Change-Id: I632d6f908a3bcbde81a6ebbadcaf2800dfe1449d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Seems the previous check was a leftover from debugging. Tests still pass
and loop checks properly now.
Change-Id: Ic12cd49881f6d146687e257794b3028f6c8e874c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
1. QSslSocketBackendPrivate::transmit can invalidate SSL context
causing subsequent SSLWrite or SSLRead calls to fail; these report
errSecParam (as null context is an invalid parameter) spuriously,
when we should rather report the cause of invalidation. The OpenSSL
backend can trigger this when it aborts connection during an SSL
handshake, on an sslErrors signal. As transmit() emits readReady(),
a directly connected slot can trigger the same problem if it aborts or
closes.
2. If during peer verification (and in checkSslErrors) we disconnect
on sslErrors signal, peer verification must be considered failed and
should not continue handshake/set connectionEncrypted.
Task-number: QTBUG-52975
Task-number: QTBUG-53906
Change-Id: Iacd3b489a4156e25ef3460ace40d21f34a946bed
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We should not remember the wrong undocked geometry. If the dockwidget is not floating,
the geometry is not relative to the global coordinate, it makes no sense to store it.
Task-number: QTBUG-53808
Change-Id: I242467d8da62d7c787eca2c784aeec646236cb44
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Calling `xkb_state_update_mask` with correctly set `depressed_mods` allows xkb to
return keys on level three or above (and not the equivalent level one key).
To preserve level two shortcuts (return equivalent level one key)
`depressed_mods` gets only set, if the pressed key is on level three or above.
Example shortcuts which now will work:
Shortcut German Layout (de) [AltGr is a level three switch]
Ctrl+@ Ctrl+AltGr+Q
Shift+1 Shift+1 (as before)
Shortcut German Neo Layout (de neo) [1] [AltGr is a level five switch]
Left AltGr+S
[1] http://neo-layout.org
Task-number: QTBUG-53121
Change-Id: I637a01edc9f2f92a5d3e7a24f5051fb1d3ac2f7f
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
The file is read using CRLF line convention on Windows.
Task-number: QTBUG-24226
Change-Id: Ie08fa603e29c80a42de4bfbfd1f4237f53c22b98
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Point to the README.md of the project; the old URL
http://code.google.com/p/angleproject is now redirected
to the bugtracker.
Change-Id: I293fc150d5b6c08f16effe8921010050faa264b5
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Silence warning in case DPI awareness was set externally unless
debug is enabled.
Task-number: QTBUG-54416
Change-Id: Id48769e3d4be3047f582e331633905c640930f21
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
"GUI application" is quite confusing, because in fact, these models
are part of QtWidgets and thus require QApplication instead of
QGuiApplication.
Change-Id: I35ccc8bfeb74c75a84b2ffbe1cab0c0839495980
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reference an SQLite3 function to verify that the library is being
linked. Discovered that the test didn't do this when I switched the
Windows configure to use a compile test to determine whether the
system has SQLite3. The test passed even though the initial
configure changes failed to provide the test with information about
the SQLite3 libraries.
Change-Id: I3114cfc2dec3a42a60c8e1e432eb8375b440d7e0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
windows and xcb enables SwitchableWidgetComposition meaning that widget
backing stores will fall back to the normal flush path when no render-to-texture
widgets are visible anymore in the window. This switch however can lead to
artifacts with the image of the rtt widget remaining visible until the next
full bacinkgstore sync. The safe and simple way around this is to do the
switch only in the next flush, keeping the flush where the switch is
discovered on the OpenGL-based composition path still.
Task-number: QTBUG-54241
Change-Id: I1d3f10999f69c58efa791dd724891add56949dee
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Where accept4() is used, NetBSD offers paccept() as a replacement function.
Modify check for using accept4() and use paccept() on NetBSD.
See http://netbsd.gw.com/cgi-bin/man-cgi?paccept++NetBSD-current
and http://reviews.llvm.org/D12485
Change-Id: I9b3ecba5f3afad6c357d3f7b8f89589bf313e273
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add pkg-config to the libpng usages as not all systems have the
symlink libpng.so -> libpng<version>.so (affected: NetBSD) that changes
with the version of the lib. If no-pkg-config is used, use -lpng as
before. Tested with FreeBSD 10.3, NetBSD 7.0.1 using png 1.6.21
Change-Id: I5c87f380c84da3d5c56c94da53adb900791c8caa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Before, we were relying on the ZOrderChange event to update the
windows title or other flags of a floating tab window when tabs
are changed. But this did not catch all the cases. For example,
the first tab switch, or when tabs are dragged out.
Task-number: QTBUG-53754
Task-number: QTBUG-52107
Change-Id: I1523ce85ceaa95f044bd81f8ccbac0a86978fb33
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
The signal was connected to the wrong slot.
Regressed in 2fe56e37ed.
Change-Id: I33135fc79c3585dfbe0f6ebc04f819e919ed9ed7
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
This can be helpful for packaging and when one wants to limit the
features to ES 2.0 to ensure the same code is used on both build
machine and deployment machine. It also prevents inclusion of
GLES3/gl3.h. Windows configure.exe doesn't do auto detection of
GLES3 so it does not get the additional option.
Change-Id: I8750b41635e41bd0ac41d9d59d93570f7d2196e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The compiler didn't complain that they were unused or -Werror / -WX was
not active.
Change-Id: Ib57b52598e2f452985e9fffd145a7b63a32189fd
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The declaration and definition of the forwarding functions for PSK
differed which leads to link errors with some versions of openssl.
Change-Id: I40410f62a584c5dbd2acf5c90422e1243514f8fd
Reviewed-by: Richard J. Moore <rich@kde.org>
This follows up ab599a3931, which did not
take installation into account.
Task-number: QTBUG-54036
Change-Id: Ic1b3acb8984255dd1ca1c288b7b150814ce9e606
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
A prior commit has already added the resetting of QMAKE_LFLAGS_NOUNDEF
in corelib.pro for FreeBSD due to environ(7) not being part of libc.
OpenBSD has the same issue, so add it to the list of BSD systems
affected for resetting the flags for qtcore.
Change-Id: I50a62271ffa05a9976e802de420d47a1425359c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fix for QTBUG-35927 introduced a too strict check when scaling from
a 16-bit source to a 16-bit destination. This patch changes the limit
to adjust to source type.
Task-number: QTBUG-54281
Change-Id: I6dd2bb8308f77520c00fa3ef6643a42462c5d351
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... for a loooong time.
it was replaced by plugin_with_soname (which is unused so far).
Change-Id: Ifc377d155d6eac41e85f3a0914ed817d55b5648b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the tests would inherit MAKEFLAGS, with somewhat predicatble results.
Change-Id: Ia17638f6229d0ae86f5558726850040703d90044
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
CONFIG static/shared needs to be manipulated before it is used by
qt_installs.prf (via qt_helper_lib.prf via config.pri).
amends 2311997.
Task-number: QTBUG-54109
Change-Id: Icb53f3170e6d6f09d60b77a221f4f239c6e6721f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
libGLES2 (the only user of these libraries) is built dynamically even in
a static qt built when dynamicgl is configured. in this case the static
libraries need not be installed.
amends 2311997.
Change-Id: Ic9bc3937d6ee0d97e0ca7fc96596fa90ebfe8710
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the included common.pri already does it.
amends 9ab41425.
Change-Id: If8c9285b92485b6574fde2adc2b92cc44f139ea0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add x86-64 and aarch64le QNX platforms. These platforms will be
available in QNX 7.0.
Change-Id: Iba1f635ba45fddf1a1caf907415a23a510ba0818
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Coordinates in device independent pixels are not suitable for checking
intersection of screen areas since the screen positions are always
unscaled.
Move the code to determine the QWindow handle out and transform
the frame to device pixels and use QPlatformScreen to check.
Change-Id: Idd94f32abc43bc7a04e4056243b7f810631f70cc
Task-number: QTBUG-52606
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This reverts commit 75b705fec8
and 798e0064e9.
This broke drag and drop of QDockWidget if there is no animations
(QTBUG-54185) and this caused numerous crash with GrouppedDragging:
crashes when dropping on another floating QDockWidget, or when
dragging away.
The problem being that 'endDrag' would cause the QDockWidget to be hiden
temporarily and it would recurse into 'endDrag' and have unwanted effects
Task-number: QTBUG-54185
Change-Id: Icad9c6748448783e039bde205b60133f89f25e8e
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The logging category symbol clashed when linking applications with both
kms backends present.
This is no longer an issue in 5.7 where the symbol is in the shared kms
support lib, but for 5.6 we need to use a different symbol name.
Change-Id: I3c323109d6c498e044289455b3d31567a4d5928c
Reviewed-by: Ralf Nolden <nolden@kde.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
We previously treated Qt::ApplicationStateInactive as a valid state to
expose windows in, to prevent a visible flash of black screen at app
startup between iOS hiding the launch screen and Qt drawing it's first
frame, but this lag is no longer an issue, so we can apply the best
practice of only rendering during Qt::ApplicationStateActive. This may
prevent crashes during application suspension.
Task-number: QTBUG-52493
Change-Id: I271281ed6fb857e6849cdb88cc2d8251d1bba1df
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
PowerVR SGX 554 is used in iPad wi-fi (4th generation) and blacklisting
it solves a problem with grabToImage() in QQuickItem.
Task-number: QTBUG-45902
Change-Id: I4b6210a48f70614c4364fc63692c97652836f5d3
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This does not seem to be a function that is overloaded.
Change-Id: Icf8942dfb1e78a2ddb38cbd1c49657f745a61989
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp: In member function ‘bool QEglFSKmsEglDeviceIntegration::setup_kms()’:
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp:391:28: error: ‘encoder’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
m_drm_encoder = encoder;
^
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp:392:29: error: ‘connector’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
m_drm_mode = connector->modes[0];
^
cc1plus: all warnings being treated as errors
Change-Id: Ic444450d06a6dd8047bd6871febb08a4a3fde6f9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When using threaded rendering the render-thread might be half-way into
rendering a frame when the application is backgrounded, resulting in
the following swap happening on a non-exposed window. This may result
in the system killing the application, as rendering is not supposed to
happen when an application is backgrounded, so we skip the flush.
Change-Id: I9ab8f2c4617391fd827558af9fb473f1734b3688
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Using dispatch_async to deliver the initial application state at startup
was broken, as that would leave the application in the default application
state, inactive, until the next runloop pass. This became a problem when
an application was started backgrounded, eg. in response to location
updates or a Bluetooth accessory waking it up, as it would have a small
window of time at startup where it would think it was able to render
content (since the window was exposed), while in fact the application
was running in the background. iOS will in these situations kill the app
for doing background rendering.
Change-Id: I1ab4a6af08a154d8625c6451b4b5c8f4453e6b43
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
During device rotation, the backing CEAGLLayer of our custom UIView is
resized by the system. Normally this is the time where we would then
reconfigure the corresponding renderbuffer that we render to, which
shares memory with the CEAGLLayer, but we chose a lazy approach where
we'd defer the reconfigure until client code actually called makeCurrent.
This caused problems because not only did we implement the lazy reconfig
in makeCurrent, but in every QIOSContext function that operated on the
default FBO, including swapBuffers(). When using threaded rendering,
such as in Qt Quick, the render thread may be half way in rendering a
new frame when the system resizes the CEAGLLayer, and we pick up that
resize on the swapBuffer call and allocate a new renderbuffer, before
flushing the queued up GL commands that were operating on another
renderbuffer of a different size. This resulted in the following crash:
0 - gpus_ReturnObjectErrorKillClient()
1 - gpusSubmitDataBuffers()
2 - glrFlushContextToken()
3 - flush(__GLIContextRec*)()
4 - QIOSContext::swapBuffers(QPlatformSurface*)
...
We solve this by still being lazy in how we reconfigure, but limit the
reconfigure to makeCurrent(). If the CEAGLLayer is resized in between
two frames, we skip the half-drawn frame. The old frame will then be
scaled to match the new size by the system, but this is preferable to
flushing a new frame that may have been drawn with two conflicting
window geometries.
Task-number: QTBUG-50017
Change-Id: Ie229f26d156dfbfc7ed8d9efd0eb5e992eee73f1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Improves performance over the default timer-implementation, and allows
us to control the rate and paused state of the display link.
Change-Id: I05761b6eb48f5e91af35735e2faa477427cd8440
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
this apparently makes no difference except for not creating bogus .prl
files - presumably, the correct path is coming from somewhere else
already.
Change-Id: Ia3f3c44e506ba14b533ff097f05acecf1e86cfb3
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
