the borrowing of headers always happens from "proper" modules which are
actually built as frameworks if so requested. that means that even
though the borrowing module itself never is a framework, it needs a
framework path and include paths that point into frameworks.
amends 20c7ab44.
Change-Id: Ic582060dd179cc592e9be7792ff02cebdfabd772
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the only users of module versions in the first place are found within
qt's own prfs; even qbs' qt module importer ignores them. but arguably,
the information makes sense.
however, exporting the same barely useful information redundantly is
plain over the top, so remove the pre-split representation.
Change-Id: Iaee69c86d8b7c8b8ef4f3580b8da333aeb8ade2c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
in a framework build, the headers are inside the "library", so it's
obviously not very wise to suppress its installation on the basis of
it not being there.
Task-number: QTBUG-57656
Change-Id: I026a3e486a2aad6ee0b8e0d264af4385af945e42
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Harald Fernengel <harryf@gmx.com>
This ensures at compile-time that Qt libraries do not use any APIs that
are not safe for use in application extensions, and fixes warning
messages that appear when linking to Qt libraries that are not built
with this flag, when used in an application extension.
This is especially important on watchOS where *all* "applications" are
actually application extensions, and on other Apple platforms if
application extensions are developed using Qt.
Task-number: QTBUG-40101
Change-Id: I022046f2584e0222253d33052b0abc221d7c93d6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When an executable is being linked and uses a library that has been
built with exceptions enabled, the executable will need the exceptions
flag in order to link in the exceptions handling code.
Change-Id: I3acdb571afbbcaf860fb0ef0482f704f605a9bbe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QPA headers are shipped as private symbols, so they should be marked as such.
This helps distros to check which applications/libraries need recompiling
on each Qt patch update.
Task-number: QTBUG-57060
Change-Id: Ie09d4d10e1edb5127d45a05a3dfa3f4c9dd012f2
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
You can now use 'module.gui' to check whether the Qt Gui module
exists in the current build of Qt.
Task-number: QTBUG-56656
Change-Id: Ic73f162ed0578e07c70e3ec3706f285b6d09a41d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
they have none.
Change-Id: I1e5ffa9960c4fac3c708be4820fb40e7909569c8
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
QT_FOR_PRIVATE should end up in QT_PRIVATE instead of QT after being
recorded in the private module pri. otherwise it's added to LIBS and
becomes part of the library's (and thus also the public module's) link
interface. after the fix, only the (semantically redundant) resolution
of qt module dependencies will add the private deps, and only when the
private module is explicitly requested.
Change-Id: I3378457013cad5fa611a22ccbe184e6aa675a2ef
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
A separate flag is no longer needed now that simulator and device builds
are not exclusive any more (*) - both 'simulator' and 'device' being set
at the same time is a sufficient indication (uikit/default_pre.prf sets
this up according to the simulator_and_device feature and the
QMAKE_MAC_SDK variable).
(*) xcodebuild mode actually still uses exclusive builds, but this is
activated locally in uikit/default_post.prf, and uikit/xcodebuild.prf
implements the actual build passes manually anyway, so this change does
not affect it.
Change-Id: Idf173a7bfeb984498d3a49ed6b8d1a16da6c2089
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
when a module makes an external dependency part of its api, the users of
that module need to know the include paths (and possibly defines) of
that dependency, and also need to link to it explicitly if they want to
access symbols from it directly.
this patch implements this via the usual qt module pri mechanism.
limitation: the external library definitions are in the private pris,
so technically a public module is not allowed to make its external
dependencies public. we don't have (and don't anticipate) such a case.
Change-Id: I2dbbdcfcfc1b200acae151a969976cd668e24f89
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
with the new configure system, all modules which have a configure.json
also produce a private config header. the forwarding module pri needs to
reflect that.
Change-Id: If79e10a2643d55ad9aa9815f20297d36d9b9feec
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
it makes no sense to version them, as they contain only #defines anyway.
it also removes the need to special-case their location in shadow builds
with pre-synced headers, which we actually failed to do anyway.
Task-number: QTBUG-56286
Change-Id: I4ea717f7be56494cfea0572389bea173d7470b6e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
every repo's .qmake.conf is expected to do it already.
Change-Id: I87ed75d80493d8f1c4548c5b9dadfdaf07b86d7e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this is a relic from the early times of the modularization.
Change-Id: I9ca46fa6457bf9ca207b6be1f0637f0349569ddf
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this makes build dirs consistent with install dirs, which fixes
launching tests, examples, and build tools in some configs.
unfortunately, this makes prefix builds slower and their build dirs
bigger due to the DLLDESTDIR implementation being stupid (QTBUG-11435),
but i'm not inclined to fix that now. it isn't actually worse than for
non-prefix builds, so whatever.
Task-number: QTBUG-54438
Change-Id: Idbd034620e95cb23f7699d243678c4e9fa6353ac
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This patch moves towards a more sensible layout for UIKit platforms,
where both the device and simulator architectures for binaries are
combined into a single Mach-O file instead of separating out the
simulator architecutures into separate _simulator.a files.
This approach is both more common in the iOS ecosystem at large and
significantly simplifies the implementation details for Qt, especially
with the upcoming support for shared libraries on UIKit platforms.
This patch takes advantage of the -Xarch compiler option to pass the
appropriate -isysroot, -syslibroot, and -m*-version-min compiler and
linker flags to the clang frontend, operating in exactly the same way
as a normal multi-arch build for device or simulator did previously.
Exclusive builds are still enabled for the xcodebuild wrapper Makefile,
which builds all four configurations of a UIKit Xcode project as before,
as expected.
A particularly advantageous benefit of this change is that it flows very
well with existing Xcode workflows, namely that:
- Slicing out unused architectures is handled completely automatically
for static builds, as an executable linking to a library with more
architectures than it itself is linked as, the unused architectures
will be ignored silently, resulting in the same behavior for users
(and the App Store won't let you submit Intel architectures either).
- Removing architectures from a fat binary using lipo does NOT
invalidate the code signature of that file or its container if it is a
bundle. This allows shared library and framework builds of Qt to work
mostly automatically as well, since an Xcode shell script build phase
can remove unused architectures from the embedded frameworks when that
is implemented, and if Qt ever starts signing its SDK releases, it
won't interfere with that either (though binaries are just resigned).
Change-Id: I6c3578c78f75845a2fcc85f3a5b728ec997dbe90
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
get rid of the entirely superfluous stock "Aborting." messages -
the event triggering the exit has already reported the problem.
Change-Id: Ib9dfb9e4212f60eceb2ea432cdf56c5a8afe9d65
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
iphonesimulator_and_iphoneos was renamed to simulator_and_device in 5.7.
Task-number: QTBUG-54163
Change-Id: If4a76f45450edc0f6e8fb3615355613212314300
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
the assumption stated in b67a0836d is actually invalid - configure sets
build_all without debug_and_release there. debug_and_release does
actually imply build_all, though.
to make things less confusing, don't let configure inject
iphonesimulator_and_iphoneos into all projects, but handle it like
debug_and_release instead.
Change-Id: Ib7acdc63308a538862fc603428f81aba60bca08e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
don't pretend that these two flags can be set separately - the
configures set them in tandem.
Change-Id: Ib0beae0152de09026d4627fd3ae0feabd9ce1b81
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The platform has been removed in Qt 5.7.
Change-Id: Ie768b5ffbe60270c27b4a670dcf580ea361cb361
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This solves an issue where header only modules in a simulator build with
frameworks on Apple platforms would result in a module like
"QtZlib_iphonesimulator.framework" being created. This patch removes
the "_iphonesimulator" infix from the name.
Change-Id: I60e818042d776cc6ac430413ccea1be1a1a1e48b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
instead of unsetting the flag later on, don't set it in the first place.
Change-Id: Id448500b02b5c3e1dc7c332cc178a84c7fd2cfdc
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the main objective was to fix the bootstrap modules in framework builds.
bootstrapped modules which "borrow" headers from "proper" modules can
specify this in a clean way now.
a side effect of this is that the bootstrap-dbus module now has its own
syncqt call.
most includepath-related setup from qt_module_pris.prf was moved to
qt_module_headers.prf.
Change-Id: Ie0d8192cfac1a8cdae0ddd0bc0cd8c3092b1e85b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It only needs stdin now, instead of stdin plus a separate file containing
a list of file names.
Change-Id: I9f3db030001e47e4a4e5ffff1425b76884cc7ca0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
now that we don't create .pc files for private modules any more, the
conditionals cannot be nested.
amends 6c5d227da, partially reverting aa20e7f9d.
Task-number: QTBUG-49763
Change-Id: I2578c83e0c767b6533abdb26bf4e8bcc8c416ef1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
judging by the history, this was only ever a workaround for poor rpath
handling. we're supposed to be over that.
Change-Id: I85601493a05a76ead999e707a2d2e9a430610981
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Recent versions of Qt have apparently added sufficient numbers of
headers that the command lines used to spawn a custom header-
parsing tool, started overflowing Windows' maximum command-line
length.
This change restructures the mechanism to use a GCC-style command-
line arguments file rather than passing filenames all directly
in the argv[] vector.
Although QNX is the usual ELF target whose cross-build is supported
on Windows, the mechanics introduced in this patch happen to affect
all other ELF Unix systems' builds too.
Change-Id: I5a7383cf9f2ebf9dffde8dbfdcdeca888265e085
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
no idea why it was limited to linux. the variable is already empty on
platforms which don't support it anyway. also, for plugins, it's
consistently enforced as well.
Change-Id: I117f4988a2e301ca98cdc088188d6f8c44ea0ba5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
[ChangeLog][Platform Specific Changes][OS X] Configure with -no-rpath
will now yield Qt dynamic libraries and frameworks with an absolute
install name (based in -libdir).
OS X package managers like Homebrew install Qt in a fixed location. This
change simplifies deployment for such package managers and is consistent
with the default expectation on Apple platforms for libraries with a
fixed location to also have absolute install names.
While a relocatable installation (the default) also works in this
scenario, it requires all software that depends on Qt to be aware of
this and to embed a suitable RPATH into application binaries (which is
not automatic for non-qmake builds). This might not be true for some
select fallback search locations, but as package managers on OS X tend
not to use those, embedding an RPATH becomes practically mandatory. In a
default Homebrew installation, Qt is configured such that the frameworks
end up in /usr/local/Cellar/qt5/<version>/lib and that will be later
symlinked to /usr/local/opt/qt5/lib, both of which are not searched by
the dynamic linker by default.
Task-number: QTBUG-48958
Change-Id: I4395df98771e06a2ce8a293d11dc755bdc50757f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
qt_framework and {app,lib}_bundle imply darwin, so there is no point in
testing for it.
Change-Id: I9fe48c26c8e271a5575b17e92df8674d3c3a3204
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
CONFIG+=qt_framework is actually put into qconfig.pri, so it's always
set in framework builds. things (sometimes) worked only by virtue of the
qt_framework checks being in "else" branches of "static" checks. use
lib_bundle instead, which triggers the actual framework build anyway.
amends b72d1db44.
Change-Id: Ib725c43476d9fb38bad940ce09905d29ff3edfa3
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
frameworks are currently broken anyway, and we don't create .pc files
for the private part of public modules, so creating them for entirely
private modules is just inconsistent.
Change-Id: I98da8def73d72ac69b9b246687dce6b1fd150f61
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
the check whether a module depends on itself should be done by the code
which *builds* modules, not which *uses* them.
the check whether a plugin tries to use itself seems kinda pointless in
the first place, so just remove it.
Change-Id: I89b357dae7d7979d131b6824f197e7088047272f
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
there is nothing to link with it anyway.
Change-Id: I2e942d24bb39855b3682f3e8d85cb6abca75cb61
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
instead of building host tools always in debug mode, follow the overall
build type, and provide an option to override it.
this supersedes the pre-existing -optimized-qmake option.
however, that option never existed in the windows configure, and this
legacy continues as far as qmake is concerned (msvc builds of qmake are
always somewhat optimized, but not mingw builds).
Change-Id: I42e7ef1a481840699a8dffff13fec2626af19cc6
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
