As the script dependency for that autotest is not really needed it should
be moved to qtbase.
Task-number: QTBUG-27706
Change-Id: Ieda8b2182a20a77f53a0be9878e82e3236c79c2b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
No reason to keep this test. If an application is trying to allocate too
much memory it will fail, and its the users responsibility to provide
sane values and catch exceptions to recover.
Task-number: QTBUG-27361
Change-Id: I29d71745ab791b6e8a76f7b1f866ff4bd7024749
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A 180° rotation results in a TxScale QTransform with negative scaling
factors (x=-1.0 y=-1.0). This is not properly handled by blitter paint
engine yet, so use software rendering fallback in this case.
This rendering issue can be seen when using "-webkit-transform" CSS
property in WebKit with DirectFB QPA platform.
Change-Id: Iee496b6bf0c90ffe36c4235ceaa2c80f296b2ca4
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
As CI runs autotests using the "check" target the approach using
DESTDIR = ../ does not work for the test. Instead the binaries are just
moved one directory up and QFINDTESTDATA is used to find the path of the
helper binary.
Change-Id: If1ed2b60821f1de4ac62f238c8af5e09cf0f444a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Seems that these tests are now passing on Windows, so remove the skips.
Change-Id: Id30ef544502f97f8bc84f35f635e39912da3afe8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QApplicationPrivate::leaveAfterRelease was not properly cleared when
mouse event handling was interrupted by a modal dialog, which caused
every mouse move over the modal dialog to trigger enter event to the
widget under cursor.
Fixed by clearing QApplicationPrivate::leaveAfterRelease if mouse event
without any buttons pressed is handled.
Task-number: QTBUG-27643
Change-Id: I4f31daa656bc643c88e5338282a671ae2077e255
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Changed the platform leave event handling logic in QWidgetWindow to
match platform leave event handling logic in Qt4, where last mouse
receiver is used as leave target only if last mouse receiver wasn't
a native window itself. In that case it is assumed to get leave event
of its own when relevant.
Task-number: QTBUG-27639
Change-Id: Id6edcd29754a15c959f18ab38b20d66e5d446510
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Before, the functor slot (or lambda expression) had to have the same amount
of arguments as the signal.
This shown to be a big problem to be able to connect to signals that had
a QPrivateSlot.
This implementation use the type of the operator() of the functor to
know how many arguments we have.
As a bonus, we also can check the arguments in a static assert.
The test comes from https://codereview.qt-project.org/#change,38703
But this patch also works without variadic template
If the compiler does not support decltype, we workaround the lack of it
by using another level of indirection.
Change-Id: I9850b43e8caf77356a2ec3f4c0b0ed532d96029e
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Pointer to const member function have a different signature, and hence
need their own traits code.
Change-Id: Ie4b2434a412f412444fb07ef1388a37cab105ecd
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We don't need to define pi.
Use some clearer names in navigateHierarchy.
Use smart pointers.
Change-Id: I482efe9235a3419f048baede6886d29d46e3057c
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Use smart pointers.
Navigation to siblings is long gone.
Change-Id: I81a10633960eefb9738990682734dcfbdd65330c
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Add a read position variable to eliminate excessive memcpy'ing when
reading a partial buffer.
Specifically, fix performance issue of reading large files from
QNetworkDiskCache in QtWebKit2.
Task-number: QTBUG-27522
Change-Id: I21edc909bf9223971b2c3db5f1fa6b89c5b61c5f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Antti Harju <antti.harju@ixonos.com>
This prevents the user of moving the leftmost column.
There will be no API to allow move of the tree-structure.
It is very weird to do that, so it shouldn't be a problem.
In case it is a big problem somewhere it can be hacked with:
QTableView unused;
unused.setVerticalHeader(tree->header());
tree->header()->setParent(tree);
unused.setVerticalHeader(new QHeaderView(Qt::Horizontal));
Task-number: QTBUG-332
Change-Id: I3a251c8d0fd472ec0ad7edb20a7f3e00af7e0da8
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Get rid of QWidget-centric QMacStyle::eventFilter() and implement the
fade out animations for scrollbars using QNumberStyleAnimation-based
QFadeOutAnimation.
Change-Id: I2000fa50d46b153e981ceafc12a53932a196382e
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
It does not make sense to add a QLayout to a QSplitter, since the
splitter manages its child widgets in the same manner as a QLayout.
The result of doing so is that the child widgets inside that layout
will lead to the splitter and the layout fighting to position the child
widgets.
QSplitter::addWidget should be used to add widgets directly to the
splitter instead.
Change-Id: I640b463cae8673f87354d28636bff4dd3cfb9679
Reviewed-by: Samu Voutilainen <samu.voutilainen@gmail.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The animation is not just supposed to run when indeterminate, but
also while it is progressing.
Change-Id: If176bd230c2f6f83781e01ea77526c24d54c8477
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Ifdef out waitForBytesWritten on Windows.
See comment in source.
Change-Id: I7a2268d2634c2524cd8291c72dd9708e430e314e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If ReadFile returns with an error then we must set our internal state
accordingly. QWindowsPipeReader::readSequenceStarted must be set to
false. If ReadFile fails, we're not within a read sequence.
Also, we must handle the ERROR_BROKEN_PIPE error.
Task-number: QTBUG-25342
Change-Id: Ic9247f170fa9cc47fa7e45d0f47ccfedac06a593
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The old code is just plain wrong for negative julian days. Replaced
with plain math from The Calendar FAQ [1], which is correct for all
julian days, provided you use mathematical integer division (round to
negative infinity) rather than c++11 integer division (round to zero).
[1] http://www.tondering.dk/claus/cal/julperiod.php
While the conversion code works for up to around JD +/- (2^63/4), we
only use an int for the year in the API, so this patch limits minJd()
and maxJd() to 1 Jan (2^31) BC and 31 Dec (2^31-1) AD, respectively.
Note that while the new conversion code looks like it would be more
expensive than the old, gcc will in fact be able to optimize it to be
slightly faster (probably because x86 hardware implements round to
negative infinity, and so GCC manages to optimize floordiv to a single
instruction, compared to the three instuctions needed for operator/).
In the following test application, run with a release mode Qt and
redirecting stderr to /dev/null, I measured an improvement from
6.81s +/- 0.08s to 6.26s +/- 0.16s user time over five runs on an
otherwise idle x86_64 system.
int main(int, char *[])
{
int year, month, day;
qint64 jd;
for (qint64 i = Q_INT64_C(-1048576) ; i < Q_INT64_C(1048576); ++i) {
QDate::fromJulianDay(i).getDate(&year, &month, &day);
jd = QDate(year, month, day).toJulianDay();
qDebug() << jd << year << month << day;
}
}
Change-Id: Ifd0dd01f0027f260401f7f9b4f1201d2b7a3b087
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
These are useful when QWindow is exposed to QML.
Change-Id: I7ec49ef365183e2c784605889e8ea22c2ef34781
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
This seems to be the established practice.
Change-Id: I75a65d722a026ab0eb1805688743f46aba406e6c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Different OpenSSL versions produce slightly different output when
dumping a certificate.
Change-Id: Ida98b24422302e287641be074d6740ca292cf203
Reviewed-by: Richard J. Moore <rich@kde.org>
Using
git ls-files -z | xargs -0 sed -i 's/ \+$//'
in the relevant directories.
Change-Id: I861ef9952fb32ed2db9ec8b67864ec7d0d61f0f2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
To avoid leaking when converting a QFuture<T> to a QFuture<void> we need
to have a separate ref. counter for QFuture<T>. When the last QFuture<T>
goes out of scope, we need to clean out the result data.
Task-number: QTBUG-27224
Change-Id: I965a64a11fffbb191ab979cdd030a9aafd4436c2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
As the script dependency for that autotest is not really needed it should
be moved to qtbase.
Task-number: QTBUG-27705
Change-Id: I4ce0d34aca97cadd79b157b0f7c90c406bed4295
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
tst_QMimeDatabase::inheritsPerformance() is not an unit test but a
performance test, so moving it from 'tests/auto/corelib/mimetypes/qmimedatabase'
to 'tests/benchmarks/corelib/mimetypes/qmimedatabase'
Change-Id: I59e84f61559023659f101666683870f2ca1d2034
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
qt.nokia.com is also going to disapper in future, so I think it is better
to use qt-project.org.
Change-Id: Ice550fe657a33609472b8e4b8630d7649f9c9fb5
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
All modules currently have a test_modules CMake test. The
new module_includes test has very similar requirements, and can
obsolete the hand-maintained test_modules tests in all modules.
After all test_modules have been removed in other repos, the
module_includes test can be renamed to that name.
The types chosen need to have a constructor which can be invoked
with no arguments. QtConcurrent has no public classes which fit
that description so it is still tested separately
Change-Id: Id7929cd32b3112c293cbf5e6964cc894a697f9b1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Change-Id: Ia9bf8d3c202b17746036e203268ef6229aaa900d
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
If a modal dialog was shown as a response to button click, the button
retained its hover highlight, because it didn't get leave event.
Fixed by tracking the most recently entered window and sending a leave
to it when modal dialog is shown that blocks it.
Also modified tst_QGuiApplication::modalWindow() autotest to check
for enters and leaves.
Task-number: QTBUG-27644
Change-Id: I387647e18a762a39d523e3df31221b9583a39f9d
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
When the QPrinter is initalized then it will set up page margins based
on the default paper size. If the paper size is changed to be a custom
one then it should disregard the margins for the default paper size.
If the page margins are set explicitly beforehand then it will use these
page margins.
Change-Id: Ic535c3a80b8b217dbd5eb5f4fb2cbc0ab1354563
Reviewed-by: Titta Heikkala <titta.heikkala@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
hasUnquotedAP currently only checks for an a or A, which is wrong
according to both the toString documentation and the comments for
hasUnquotedAP.
Change-Id: I03015734b846fe761085cf8f8fca2b29210cff97
Reviewed-by: Jon Severinsson <jon@severinsson.net>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
We can insert directly on the most left-most Node.
We always enforce an insert here (unlike the insert call),
but that is not a problem since the keys in a std::map are unique.
Change-Id: Ib409b90ffc57a5a43dab4a4b08d34f6fdabd057f
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
in case when the layout is partially initialized.
We shouldn't access any data except of indices
if GlyphIndicesOnly flag has been passed in.
Change-Id: I264689b498e0f9de8b5c040d47dbae4f6ef391c4
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
In addition to the actual removal of the softkeys API in QAction,
this commit removes some enums related to the softkeys feature:
Qt::WA_MergeSoftkeys
Qt::WA_MergeSoftkeysRecursively
It also removes some "zombie" enums:
Qt::WindowSoftkeysVisibleHint = 0x40000000,
Qt::WindowSoftkeysRespondHint = 0x80000000,
(The only implementation that used these were removed when
qapplication_s60.cpp and qwidget_s60.cpp were removed.)
Change-Id: Ib6fc6d543def4757383d5f19256199d9d190c614
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Remove QSKIP and instead omit the whole tests when appropriate.
Remove QSKIP from crashTest, crashTest2 and exitStatus on Windows,
the tests are now passing.
Add a guard in testForwarding to check if QT_NO_PROCESS is defined.
Change-Id: Icba4d773315e3bf87764a381742168b51cf169c0
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
