It only contained a concatenation of the individual rule sets,
probably to fix their order in a central place, as well as
simplifying iteration in defaultCategoryFilter().
Fix these two issues differently, but introducing a RuleSet
enum that lists rule sets in the order in which they should
be applied by defaultCategoryFilter(), and turn individual
rule sets vectors into a C array of vectors.
This enables two nested loops in defaultCategoryFilter to
replace the one loop over 'rules'. Apart from building up
'rules' in updateRules(), this was the only access to that
member. That leaves updateRules() with just the task of
running defaultCategoryFilter() on the new rule sets.
Consequently, a call to updateRules() can now replace the
identical loop in installFilter().
Performance should not suffer. Iterating over a fixed-size
array of vectors is hardly any slower than iterating over
a single vector, and while the construction of 'rules'
was probably a one-off task in most programs, this way
of keeping the rules also saves memory because rules are
not kept in two different vectors.
It is also more maintainable, of course.
Change-Id: Ibc132d096c8137dd02b034752646212e51208637
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Nothing seems to be telling the popup on which screen it should be shown
on. To fix this, simply set same screen the QComboBox uses to the popup.
Task-number: QTBUG-58392
Change-Id: If62a26fe4e51bcf3d770ee72c9baa998541618f4
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Extract Method msgType2i18nString() and use it to build 'rich' in a
single QStringBuilder expression.
Replace the switch over QtMsgType with an array of QT_TRANSLATE_NOOP'ed
strings. That introduces a dependency on the order and amount of enum
values, so add static and dynamic asserts to catch any change.
Saves memory allocations, as well as nearly 300B in text size on GCC 7
optimized Linux AMD64 builds.
Change-Id: I48cc916cba283e482a90ca4ae28aa17b26a4e5ab
Reviewed-by: David Faure <david.faure@kdab.com>
QEMU does not support all syscalls needed for tcp socket testing.
Skipped tests that can't pass on QEMU.
Task-number: QTBUG-59966
Change-Id: Ib6d12d0fc4c913a0222e13db57f0864b7fdf21ba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
8a375341cf added swap() to QJson* classes
and marked them shared-not-movable-until-qt6.
This change made QMetaType start reporting that QJson* classes were
movable; however, the test used QTypeInfo and not QTypeInfoQuery to
double check that information.
Port the test to QTypeInfoQuery.
Change-Id: I3227a70a8f24c0013257e180e9cb9cfebe9947f9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since commit bf2160e72c, we can rely on
charNN_t support in all compilers except MSVC 2013, and since that
commit, we use (in 5.10, not 5.9, yet)
!defined(Q_OS_WIN) || defined(Q_COMPILER_UNICODE_STRINGS)
when we only need charNN_t, the type, as opposed to its library
support (u16string, char_traits<char16_t>, ...).
This patch splits the Q_C_UNICODE_STRINGS macro into two, adding
Q_STDLIB_UNICODE_STRINGS for when we need std::uNNstring, leaving
Q_C_UNICODE_STRINGS for when we need just charNN_t support.
In QDebug, when constructing a QChar out of a char16_t, cast to ushort
first, since QChar(char16_t) was only officially introduced in Qt 5.10.
[ChangeLog][Potentially Source-Incompatible Changes] The internal
Q_COMPILER_UNICODE_STRINGS macro is now defined if the compiler
supports charNN_t, even if the standard library does not. To check for
availability of std::uNNstring, use the new Q_STDLIB_UNICODE_STRINGS
macro.
Change-Id: I8f210fd7f1799fe21faf54506475a759b1f76a59
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That's before the return type or static, inline, constexpr or such
keywords (if any).
Perl Script:
s/^(\s+)(.*) Q_REQUIRED_RESULT(;)?(\s*\/\/.*)?$/\1Q_REQUIRED_RESULT \2\3\4/
Change-Id: I7814054a102a407d876ffffd14b6a16182f159e2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
They're not affected by the GCC bug noted in the comment.
Change-Id: I7814054a102a407d876ffffd14b69e8a8e2527f1
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Creating a precompiled header exclusively for a one- or two-file module
is wasteful. The time that it takes to build the precompiled source is
on the same order as a regular compilation, so enabling precompiled
headers for those modules just makes the build slower.
Also make it possible to override the precompiled header by just setting
PRECOMPILED_HEADER to empty.
Change-Id: I0e1a09998253489388abfffd14b5f221288c4826
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Let's not allow any new code that uses non-conforming syntaxes. With
GCC and like, we already use -std=c++11 instead of -std=gnu++11 for that
very reason.
Change-Id: I4a7dc1fe14154695b968fffd14aba9f8cea69c47
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Do not use a self-assignment, as that may trigger compiler warnings.
Casting to void is also what Q_UNUSED is doing these days, but we can't
use it here because qgrayraster.c does not include qglobal.h.
Remove a 15-years old comment related to the self assignment.
Found by clazy.
Change-Id: I8cc92b7a1b0b5fb13824959740243e17606ec753
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 47cc9e23a3.
We use QCoreApplication::applicationDirPath in the logging initialization to find
a possible qtlogging.ini file. Because QCoreApplication::applicationDirPath requires
a QCoreApplication instance this leads to a qWarning, which in turn leads to a
recursive call to the logging initialization, and in turn to a recursive mutex deadlock.
Task-number: QTCREATORBUG-18031
Change-Id: Ic75e1e8c062eb647991725378489bf87c9648cca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Commit 288bfb0bbd added a test that uses QLineEditIconButton, which
requires QT_BUILD_INTERNAL to be defined in order for the findChild()
call to work as expected.
Change-Id: Ieda18f4e26a91322e8a83c14f8d1fbbe4313ecf0
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Delete the QGraphicsEffect from the QWidget destructor instead of from
the QWidgetPrivate destructor. The destructor of QGraphicsEffect still
access methods of the QWidget, but the QObjectPrivate being destroyed
from ~QObject, the pointer is no longer a QWidget.
Fix warning with UB sanitizer in tst_QWidget::setGraphicsEffect
qwidget_p.h:900:23: runtime error: member call on address 0x000001d822c0 which does not point to an object of type 'QWidget'
0x000001d822c0: note: object is of type 'QObject'
00 00 00 00 b0 46 5f 40 e5 7f 00 00 00 23 d8 01 00 00 00 00 f0 e6 00 44 e5 7f 00 00 00 00 74 47
^~~~~~~~~~~~~~~~~~~~~~~
vptr for 'QObject'
#0 0x7fe54767db76 in QWidgetEffectSourcePrivate::detach()
#1 0x7fe548f29815 in QGraphicsEffect::~QGraphicsEffect()
#2 0x7fe548f2a1b7 in QGraphicsBlurEffect::~QGraphicsBlurEffect()
#3 0x7fe548f2a208 in QGraphicsBlurEffect::~QGraphicsBlurEffect()
#4 0x7fe5475cd463 in QWidgetPrivate::~QWidgetPrivate()
#5 0x7fe5475ce62c in QWidgetPrivate::~QWidgetPrivate()
#6 0x7fe5400d0dda in QObject::~QObject()
#7 0x7fe54763d411 in QWidget::~QWidget()
#8 0x7fe54763d7f4 in QWidget::~QWidget()
#9 0x4cc309 in QScopedPointerDeleter<QWidget>::cleanup(QWidget*)
#10 0x4cc309 in QScopedPointer<QWidget, QScopedPointerDeleter<QWidget> >::reset(QWidget*)
#11 0x4cc309 in tst_QWidget::setGraphicsEffect()
Change-Id: I19c049e979cfce2adda908af8336cb4adac8f6c4
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We can't just static_cast a child to QLayout, because the child might
not be a QLayout, and even if it was, we might be called from the
QObject destructor so we would not be a layout anymore.
Instead we can just qobject_cast the deleted object to a QLayout and
remove it from the layout with removeItem.
This would not take in account the case where we would be called because
the QLayout gets destroyed, so we handle this case from ~QLayout by
removing ourself from the parent.
Note that the comment in ~QLayout was wrong, as the layout gets destroyed
explicitly from ~QWidget, not from ~QObject.
Change-Id: I49c6f17a76f207b9d750b6e5d987469498b96b31
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We don't need to defer to NSWindow creation before determining the initial
window geometry, and we don't need to redetermine each time we re-create
an NSWindow for a QCocoaWindow.
Change-Id: Ie13380830b44e96670ff16513f29deef5f5ae313
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
qimage.cpp:2127: warning: Can't link to 'isDetached()'
qmatrix4x4.cpp:1933: warning: Can't link to 'operator()()'
Change-Id: I93a2ead9650faf139040173f8d3b24cfa1e730ae
Reviewed-by: Martin Smith <martin.smith@qt.io>
CoreWindow::GetAsyncKeyState returns flags and not enums so checking
equality does not give the needed result.
As seen in qwindowskeymapper.cpp key events that only contain a modifier
key should not have the key itself as a modifier when calling
handleExtendedKeyEvent.
With the current approach the modifier states are the same as
on desktop Windows.
Task-number: QTBUG-58750
Change-Id: Ie0f3e1d3e8294e1a6b41c9223a7a5153306579f6
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
CorePhysicalKeyStatus::KeyStatus does not give the information we are
after so we have to keep track of "auto repeat" state of the keys
ourself.
Task-number: QTBUG-59232
Change-Id: I22aa185780e5fa1f7f3c23c2deb2a0dde0c4a582
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Fixes two separate errors. QImage::transform was incorrectly adding
colors to the color-table of the returned image when the converted image
would not be indexed, and qpnghandler was looking at non-empty color-
table instead of color format.
Task-number: QTBUG-43708
Change-Id: Ife14b6428ca65ac7d3a0b36a89a73e56d64586b4
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QLineEditIconButton currently draws a fully transparent pixmap in its
paintEvent() function, when the line edit is empty. This does not work
when there is another trailing QAction that is visible even when the
line edit has no text, as reported in QTBUG-59957.
To fix this issue, make sure the clear button is always the leftmost
button.
Task-number: QTBUG-59957
Change-Id: I8a4f96aae07856aa0e1053ebb338ba9bdf052a16
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
A signal emitted after the first 'isOpen' check on QNetworkReply can
trigger a slot that aborts/closes our reply. So before we can append
any data to reply's buffer, we have to re-check that we're still open.
Task-number: QTBUG-59909
Change-Id: I781d5a4fd5fc30d485af63f45cf36c254378af64
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Mark QPlatformGraphicsBuffer and QSystemTrayIcon as internal.
Change-Id: I39e5b4f635fca21ab0544cd840a113514b6b1e99
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Allows categorized logging before QCoreApplication has been created,
which otherwise would silently fail to output anything because the
category would never be enabled, despite QT_LOGGING_RULES being set.
Change-Id: Ia733105c5b6f28e22af511ced5271e45782da12b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Preserve the device pixel ratio in the various helper functions
and when drawing.
Task-number: QTBUG-60026
Change-Id: Ieac9360b00044b6aedd0d3e1ad6e3b16d436f20f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
qhstspolicy.cpp:105: warning: Undocumented parameter 'flags' in QHstsPolicy::QHstsPolicy()
qhstspolicy.cpp:105: warning: No such parameter 'includeSubDomains' in QHstsPolicy::QHstsPolicy()
qnetworkaccessmanager.cpp:732: warning: Undocumented parameter 'knownHosts' in QNetworkAccessManager::addStrictTransportSecurityHosts()
Change-Id: I24217d328df12febab30e19e2abd351e87007959
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Mention that it is a private function. Also mention using
QTest::createTouchDevice() for adding simulated touch screens
to autotests.
Task-number: QTBUG-26647
Change-Id: I08c12225768e76b1b9e3fc0fda00af86d44ca766
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Bo Thorsen <bo@vikingsoft.eu>
Reviewed-by: Rainer Keller <Rainer.Keller@qt.io>
Initialize a deleter for a new object, created by
QSharedPointer::create(), only after the object is actually
constructed.
[ChangeLog][QtCore][QSharedPointer] Fixed undefined behavior when
creating an object with QSharedPointer::create() and its conscructor
throws an exception.
Task-number: QTBUG-49824
Change-Id: I07f77a78ff468d9b45b8ef133278e8cdd96a0647
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
drmEventContext has grown by one pointer, so the build fails with an
error about a member without initialization.
qeglfskmsgbmdevice.cpp:147:5: error: missing initializer for member ‘_drmEventContext::page_flip_handler2’ [-Werror=missing-field-initializers]
Change-Id: I0e1a09998253489388abfffd14b6014b1ddc90e1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Clang 3.8 has support for __attribute__((target(xxx))) and its SIMD
headers can be included unconditionally.
Change-Id: Ic15b7ff417c8412893e5fffd14b5b42b950b48d7
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
