For the readonly case (e.g. progress dialogs), where local file paths
look much nicer to end users than file:/// URLs.
Change-Id: I899fed27cfb73ebf565389cfd489d2d2fcbeac7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Commit 1e6514a714 changed the mutex from
recursive to non-recursive, which could introduce dead lock if the
animation starts other animation (This is the case in QMainWindow
layouts)
Change-Id: I1b149b78a802748eb24b5700fffeca0b8555f005
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Some minor fixes: obviously, a valid match always come from a
valid regular expression, but a valid regular expression can create
an invalid match (internal error during matching).
Also, testing an invalid iterator should silence the emitted
warnings.
Change-Id: I585bb99a81e22f108601fd66bf30b56e0229d68b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QRegularExpression::captureCount() returns the number of
capturing groups inside the regular expression pattern.
Change-Id: Ib90ce67c67d06ab2966f0c98bd91da21defc156d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Trivial change: compare dpointers first, then the data.
Added test function for operator==.
Change-Id: I33ac64a59db4ccad56c30be17622187e42415f38
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Added QRegularExpression, QRegularExpressionMatch and
QRegularExpressionMatchIterator as PCRE-enabled, regexp classes.
Documentation is included, as well as a first round of autotests.
Task-number: QTBUG-23489
Change-Id: Id47031b80602c913ccd2fd740070e3024ea06abc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This makes it possible to do things like
QVariant::fromValue(new SomeObject);
without first using Q_DECLARE_METATYPE(Something*)
This functionality was originally part of
http://codereview.qt-project.org/#change,11710 but was rejected
because the functionality was based on specialization of
QVariant::fromValue which could be dangerous.
This new implementation doesn't have such danger.
Change-Id: I83fe941b6984be54469bc6b9191f6eacaceaa036
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is due to the search in the suffix tree starting at position
fileName.length() - 1.
Change-Id: I98501c1724c7dde2626351ace8ba19faa0d2e1e1
Reviewed-by: Ivan Komissarov <ABBAPOH@nextmail.ru>
Reviewed-by: Wolf-Michael Bolle <wolf-michael.bolle@nokia.com>
The latest windows run of CI has QSettings test passing, so remove the
CONFIG += insignificant_test from it.
Task-number: QTBUG-24145
Change-Id: I35c0d8d4f72ad49f9f21dcd486ab33a37ab95e15
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This commit is complimentary to the commit which introduced a similar
partial specialization for single template argument types:
6b4f8a68c8
If T and U are available as metatypes, then QHash<T, U> is too.
Change-Id: I09097b954666418b424c8c23577032beb814343a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QMetaType::Void was ambiguous, it was pointing to a valid type (void)
and in the same time it was signaling errors in QMetaType. There was
no clean way to check if returned type was valid void or some
unregistered type.
This feature will be used by new QMetaObject revision which will
store type ids instead of type names. So it will be easy to
distinguish between:
void mySlot();
MyUnregisteredType mySlot();
Change-Id: I73ff097f75585a95e12df74d50c6f3141153e771
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Remove the -armfpa option the config.tests/unix/doubleformat*
detection. The places where we used QT_ARMFPA and Q_DOUBLE_FORMAT
has been removed as well.
Rationale: ARM FPA with GCC does not work with EABI. Qt currently
does not support compiling without EABI, making ARM FPA an
impossibility. It is unknown whether other compilers provide ARM FPA
support with EABI. Support for ARM FPA can be re-added in the future
should the need arise, but since ARM VFP is available for ARMv5 and up,
we should encourage implementors to instead use soft-floats or VFP.
Change-Id: I3671aba575118ae3e3e6d769759301c8f2f496f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Specialise QTypeInfo<QPair<T1,T2>> based on the properties of
T1 and T2:
- If either T1 or T2 is Q_COMPLEX_TYPE, so is QPair<T1,T2>.
- Otherwise, if either T1 or T2 is Q_MOVABLE_TYPE, so is QPair<T1,T2>.
- Otherwise, QPair<T1,T2> is Q_PRIMITIVE_TYPE.
Change-Id: I8aecbd37e3b7924f77f38967498deabf1a19ca24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Do this regardless of whether the event subclass
is public API or only used in examples. Examples
are examples, used by others as templates or even
copied verbatim, so they should also follow sound
engineering rules.
Anyway, there's only one in examples/...
Change-Id: I586ff16407a956c9e89288fdd4377eed73f45c0f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
- It was trying to install syslocaleapp sub program as TESTDATA
instead of an application.
Change-Id: I2117d11335bc2fd37a8ccc9a03b0337382f0177f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed remove() test to check the file just removed is gone.
Change-Id: I0b6c176e624134402b5547866064f436ce063f16
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Added install of app sub program so it works from install directory
Change-Id: Ia83643519752a3cbb59d6da2aed132d683a94bee
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- subtest not valid if run as root so added a check and skip
Change-Id: Iae993e20f272f9303a75062ef00d22b49df5e84a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Those escape sequences have a special meaning in the XML Schema 1.1
regular expressions, but not in Perl-compatible ones.
An escape sequence that has no special meaning should match the
escaped character itself; this patch fixes QRegExp's behaviour in
that regard (previously, it added a character class matching
nothing).
Change-Id: I983f923baa7c2ec19938b96353f3a205e6c06d58
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I originally tried to put Q_DECLARE_TYPEINFOs into
Q_DECLARE_OPERATORS_FOR_FLAGS, to declare not only
the flags type, but also the underlying enum as
primitive, but too many users (arguably correctly)
used Q_DECLARE_OPERATORS_FOR_FLAGS at (non-global)
namespace scope where QTypeInfo would have been
specialised in the wrong namespace.
So specialise QTypeInfo for QFlags<T> only.
Change-Id: I4af6e29aefbd9460a3d2bc6405f03cdf6b1096bc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
- Use temporary directories to avoid instabilities
due to remains of previous failed tests and locked
directories.
- Replace SRCDIR by QFINDTESTDATA(), reference only
the freedesktop.org.xml contained in the Qt source
tree by $$QT.corelib.sources.
- Improve some error messages, test suite instructions
for Windows.
Change-Id: Idee8e3767ef0a8299df3bdaaac20334164878db0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
This is meant to reduce the number of allocations on growing containers.
It serves the same purpose as the existing qAllocMore which is currently
used by container classes.
While only a container knows when it is growing, it doesn't need to care
how that information is used. qAllocMore is currently treated as a
black-box and its result is (basically) forwarded blindly to an allocate
function. In that respect, container code using qAllocMore acts as an
intermediary.
By merging that functionality in the allocate function itself we offer
the same benefits without the intermediaries, allowing for simpler code
and centralized decisions on memory allocation.
Once all users of qAllocMore get ported to QArrayData and
QArrayData::allocate, qAllocMore can be moved or more closely integrated
into qarraydata.cpp and qtools_p.h can be dropped.
Change-Id: I4c09bf7df274b45c399082fc7113a18e4641c5f0
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This function matches QMetaMethod::parameterTypes().
The implementation of QMetaMethod::parameterTypes() was moved to a
helper function in QMetaObjectPrivate, so that it can be shared with
QMetaMethodBuilder.
Change-Id: I4361713996dc4ea31a79c2fc74c813ee5e9c3069
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This commit introduces two significant changes to the meta-object
data format:
1) Meta-type information (QMetaType type/name) information is
stored directly in the meta-data for both properties and methods;
2) The original signature (string) of a method is no longer stored
in the meta-data, since it can be reconstructed from the method
name and parameter type info.
The motivation for this change is to enable direct access to method
names and type information (avoiding string-based lookup for types
if possible), since that's typically the information language
bindings (e.g. QML) need. (moc already had all the desired
information about methods, but it threw it away!)
This change keeps support for the older (6 and below) meta-object
revisions, but the support will be removed after a short grace
period.
The following public QMetaMethod functions have been added:
name() : QByteArray
returnType() : int
parameterCount() : int
parameterType(int index) : int
The following internal QMetaMethod function has been added:
getParameterTypes(int *types) : void
This commit extends the meta-method data to include explicit
type/name data for methods. The new data follows the existing
(5-word) method descriptors in the meta-data. The method descriptor
format was modified to enable this. First, the descriptor now
contains the meta-data index where the method's type/name information
can be found. Second, the descriptor contains the number of
parameters. Third, the descriptor has a reference to the name of the
method, not the full signature.
Each entry of a method's type/name array contains either the type id
(if it could be determined at meta-object definition time), or a
reference to the name of the type (so that the type id can be
resolved at runtime).
Lastly, instead of storing the method parameter names as a
comma-separated list that needs to be parsed at runtime (which was
how it was done prior to this commit), the names are now stored as
separate entries in the meta-object string table, and their indexes
are stored immediately after the method type info array. Hence,
parameter names can be queried through the public API without
parsing/allocating/copying, too.
Task-number: QTBUG-24154
Change-Id: Idb7ab81f12d4bfd658b74e18a0fce594f580cba3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In Qt5 the meta-data format will be changed to not store the
method signature string explicitly; the signature will be
reconstructed on demand from the method name and parameter type
information.
The QMetaMethod::signature() method returns a const char pointer.
Changing the return type to QByteArray can lead to silent bugs due to
the implicit conversion to char *. Even though it's a source-
incompatible change, it's therefore better to introduce a new
function, methodSignature(), and remove the old signature().
Task-number: QTBUG-24154
Change-Id: Ib3579dedd27a3c7c8914d5f1b231947be2cf4027
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Up to and including meta-object revision 6, string data have been
stored as 0-terminated C-style strings, that were made directly
accessible as const char pointers through the public API
(QMetaMethod and friends).
This commit changes moc to generate an array of QByteArrayData
instead, and adapts the QObject kernel accordingly.
Generating an array of QByteArrayData (byte array literals)
means that the strings can now be returned from public (or private)
API as QByteArrays, rather than const char *, with zero allocation or
copying. Also, the string length is now computed at compile time
(it's part of the QByteArrayData).
This commit only changes the internal representation, and does
not affect existing public API. The actual (C) string data that the
byte array literals reference still consists of zero-terminated
strings. The benefit of having the QByteArrayData array will only
become apparent in the upcoming meta-object data format change, which
changes the format of property and method descriptors.
Support for the old meta-object string data format was kept; the
codepaths for old revisions (6 and below) will be removed in a
separate commit, once all the other meta-object changes are done and
affected code has been adapted accordingly.
Task-number: QTBUG-24154
Change-Id: I4ec3b363bbc31b8192e5d8915ef091c442c2efad
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
- Skip the failing windowsDefaultLocale() test.
- Improve the handling of the subprocess, locate
the binary in initTestCase instead of repeatedly searching it.
- Make all applications console/non-app bundles.
Task-number: QTBUG-24543
Change-Id: I79dfaa3320cd5698f02e74a3fe53477d4a79d4fb
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The libraries were built into wrong directory in Windows. Fixed it so
that the libraries are built into debug and release directories like
the test executable.
Also fixed QMAKE_CLEAN statement, which was using incorrect separator.
Task-number: QTBUG-24151
Change-Id: Iade656af5f83ef2b79c2b9c4177df4a16b2f6821
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
moc is currently generating code to convert from a pointer to member
function of a slot or signal to its index.
The idea was that it could be usefull for slots to have the new syntax
do the same as the old one (connecting signal index to slot index). But
in practice, the new syntax do not use the IndexOfMethod for slots.
Also, it does not work for all the slots (no Q_PRIVATE_SLOT,
no static slots)
So since it is not used, and that it would take room in the binaries to
generate all the code to get the index of slots, we remove it.
If ever we need it, we can still add it later.
Change-Id: Ia417e3e524d7915ca86433ea86c66ac2b299c81a
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
This adds Sha224, Sha256, Sha384, and Sha512 enum values to
QCryptographicHash::Algorithm. The implementation comes from RFC 6234,
http://tools.ietf.org/html/rfc6234, which is added to
src/3rdparty/rfc6234. Only the headers and SHA-2 code is included in
src/3rdparty/rfc6234 (the SHA1, HMAC, and HKDF code is not included).
Change-Id: I85139fd118291f15efc22899a5ddd1cc83810cfb
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Create subdirectories containing profiles to avoid
problems with -fast.
- Use QFINDTESTDATA to locate binary.
- Make it a console application, no Mac-bundle.
- Add error messages to the test, give it a longer time-out
and ensure sub-process is killed if it hangs.
Change-Id: Ibc177b786c4bc8fdbc068a8c45f4801a41c9f660
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Fixes a crash when invoking various QRegExp methods on an object
*before* doing any match. For instance fixes:
QRegExp re;
re.matchedLength(); // crash
Task-number: QTBUG-23352
Change-Id: I9c239ff790a139c7820ef1aeced89d31320ae6b0
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When configuring with -fast on Windows, a directory which contains two
.pro files, one SUBDIRS and one not, will have the SUBDIRS Makefile
silently clobbered by the non-SUBDIRS Makefile. In practice, this may
cause various subdirectories to be silently excluded from the build.
Rearrange .pro files for this test to avoid triggering this bug.
See also e9015b3bc8.
Task-number: QTBUG-21168
Change-Id: I18fac1ac636fdc6b2aaee1b4cdfee9c4bc2a77ff
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This setting is extremely harmful, as code cannot know whether or not to expect
it. It also made the behaviour of QString::fromAscii and ::toAscii unintuitive,
and caused a lot of people to make mistakes with it.
Change-Id: I2f429fa7ef93bd75bb93a7f64c56db15b7283388
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Fix warning: "Character represented by universal-character-name
'\uFFFF' cannot be represented in the current code page (1252).
- Fix character conversion
- Change source file to plain ASCII, add defines for special
characters.
Change-Id: I8557e6ba7488f746247f0d78181f14bfb7d5aaae
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
It used to be an index into the first element in 'd' that came after
'offset'. It is now the byte offset from the beginning of the
QStringData structure.
By no longer using an actual array to access characters, we also steer
clear of GCC bug #43247:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=43247
This aligns this data structure with QArrayData. The intention is to
have QVector, QString and QByteArray share the same memory layout and
possibly code.
Change-Id: I4850813e1bd47c3cb670c50c9a8ccc1bff2e8597
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When configuring with -fast on Windows, a directory which contains two
.pro files, one SUBDIRS and one not, will have the SUBDIRS Makefile
silently clobbered by the non-SUBDIRS Makefile. In practice, this may
cause various subdirectories to be silently excluded from the build.
Rearrange .pro files for this test to avoid triggering this bug.
Task-number: QTBUG-21168
Change-Id: Ic51941db497d7b8fb004f3c50f5ea24d90ff3114
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
I can't figure this one out, but it seems to be a clang compiler bug
that is triggered in association with -DQT_NO_DEBUG. Changing the
test from QVERIFY to QCOMPARE keeps the intent and the check, but makes
the failure go away.
It can't hurt...
Change-Id: Ib34e5e850e5b731d729e417430dec55e372805ac
Reviewed-by: Chris Adams <christopher.adams@nokia.com>
This abstraction imposed serious performance penalties and is being
dropped from the public API.
In particular, by allowing file names to be arbitrarily hijacked by
different file engines, and requiring engines to be instantiated in
order to decide, it imposed unnecessary overhead on all file operations.
Another flaw in the design with direct impact on performance is how
engines have no way to provide (or retain) additional information
obtained when querying the filesystem. In many places this has meant
repeated operations on the file system, where useful information is
immediately discarded to be queried again subsequently.
For Qt 4.8 a major refactoring of the code base took place to allow
bypassing the file-engine abstraction in select places, with
considerable performance gains observed. In Qt 5 it is expected we'll be
able to take this further, reaping even more benefits, but the
abstraction has to go.
[Dropping this now does not preclude that virtual file systems make an
appearance in Qt at a later point in Qt 5's lifecycle. Hopefully with a
new and improved abstraction.]
Forward declarations for QFileExtension(Result) were dropped, as the
classes were never used or defined.
Tests using "internalized" classes will only fully run on developer
builds. QFSFileEngine was removed altogether from exception safety test,
as it isn't its intent to test internal API.
Change-Id: Ie910e6c2628be202ea9e05366b091d6d529b246b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This code sets LANG=en_US so that the method comment(), which returns a translated
name, can be compared with an expected result in English.
(QMimeType::comment uses QLocale::system().name() and QLocale::system().uiLanguages())
But LANG= has no effect if LC_ALL is set, so LC_ALL needs to be cleared (or set
to en_US) for the test to work.
Change-Id: Icb031057769be9bc8c0fcab65daa45e7bf1d5b18
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The move constructor sets other.d_ptr to zero. This is safe, because
after being moved from, the object is left in a state in which it
can be safely destroyed (delete nullptr is a no-op).
It cannot meaningfully be used anymore (most members will crash with
a nullptr dereference), but in most cases, the moved-from object
cannot be accessed anyway (not a named object), and if a named object
is moved from, it must have been through explicit std::move(), as in
the test case.
The STL makes better guarantees (moved-from containers are .empty()),
but I don't think it's worth introducing a null state into
QEasingCurve just for supporting a use-case that should be
considered a bug anyway.
Change-Id: I4115b7386cdea6960507da6843a0d0196d8e4139
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implemented as in QPen etc.
Change-Id: I65b43c6ec7308ca4b44f614594c15c41ab2f89f9
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implementated as in QPen etc.
Change-Id: Ia08551bf7902b60e115d1b1d2353030597e34841
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It used to be an index into the first element in 'd' that came after
'offset'. It is now the byte offset from the beginning of the
QByteArrayData structure.
By no longer using an actual array to access characters, we also steer
clear of GCC bug #43247:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=43247
This aligns this data structure with QArrayData. The intention is to
have QVector, QString and QByteArray share the same memory layout and
possibly code.
Change-Id: I8546e5f51cd2161ba09bd4ada174b7f5e6f09db7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They create noise in the test results.
Change-Id: I40e7239ba7cd41bec577fe8220c86476553a6502
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This function provides a proper way of determining whether a function
returned by QMetaObject::method() is valid. (Checking whether
signature() returns a 0 pointer, which e.g. testlib does, is not an
ideal API -- especially given that signature() will soon be removed
and replaced by a function that returns a QByteArray.)
Change-Id: I644f476b09904925f2042945f5d0ad744482b682
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The helper functions contained QSKIP macros which do not also skip their
parent function. These QSKIP function were removed and replaced with a
return success value.
Change-Id: I533f57842fc95beaeb1fcde5235678e9807db056
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For shadow builds where "make install" had not been run, the
tst_QLocale::emptyCtor test function would fail to find its helper
application because QFINDTESTDATA was not searching for it in the build
directory due to the test not instantiating QCoreApplication.
This commit fixes the test by instantiating a QCoreApplication using the
QTEST_MAIN macro, which also allows some special case code for Windows
CE to be removed.
Change-Id: Ic81d4699da2538c24b36b3d6bd52c4a02ad417f4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Made test depend on subprogram to make sure it was there when
test ran.
- install signalbug subprogram
Change-Id: Ie0a19e52d131adcd17c97b263389aecffb81520e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reduce the thread and iteration counts to make this test execute faster.
This change reduces the runtime to 14 seconds (from 5 minutes, 38
seconds).
Change-Id: Id5ea056cfd33022da5a06809f0598a5cdb02b27b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
History of the development before the import:
ssh://codereview.qt-project.org/playground/mimetypes.git
Mimetype definitions come from shared-mime-info where available (UNIX systems),
loaded using a mmap'ed binary cache generated by update-mime-database.
As a fallback if no cache is found, we parse the raw XML files otherwise.
This makes the MIME type support fast and with very low memory usage on UNIX,
and it makes it easy to use on Windows (no dependency on shared-mime-info,
Qt even includes a freedesktop.xml file to use if none are found on the system).
Change-Id: I27b05008216ff936dc463bd80d3893422bfb940e
Reviewed-by: Richard J. Moore <rich@kde.org>
qAllocMore is used by growing containers to allocate additional memory
for future growth. The previous algorithm would grow linearly in
increments of 8 up to 64 and then progress exponentially in powers of
two.
The new (constant time) algorithm does away with the linear segment and
always progresses exponentially. It also has the nice benefit of cleanly
avoiding undefined behaviour that the old implementation tried hard to
circumvent.
Besides always progressing exponentially, the next-power-of-two
algorithm was tweaked to always include space for growth. Previously
queries at boundary values (powers of two) would return the same value.
The test was updated to verify sanity of results. As the algorithm is
well behaved, testing of bogus data was dropped. Whatever happens in
those cases is irrelevant, anyway: the bug lives elsewhere.
Change-Id: I4def473cce4b438734887084e3c3bd8da0ff466b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The default constructor for QSettings does not set NoAccess status, even
if the organization domain, organization name, and application name are
empty. Instead of trying to fix QSettings, keep the existing behavior,
and test for it.
Failures from tst_QSettings no longer need to be ignored, so
mac:CONFIG+=insignificant_test has been removed from the .pro file.
Task-number: QTBUG-22745
Change-Id: Ic9f8b6821c483c217e1ef2ece704be2da169e340
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The architecture is detected at compile time based on the predefined
macros from the compiler. Don't use QT_ARCH in .pro, .pri, or .prf
files. The PNG_NO_ASSEMBLER_CODE define from libpng.pri is not present
in the current copy of src/3rdparty/libpng, so no change in
functionality is expected.
The conditional for the SUPPORT_JIT define in pcre.pri is moved to
src/3rdparty/pcre/config.h, again so that we can use the compiler's
predefined macros to detect the architecture at compile time.
Replace QT_ARCH_ARM, QT_ARCH_MIPS, and QT_ARCH_SPARC with their
Q_PROCESSOR_* equivalents.
Replace QT_ARCH_INTEGRITY, QT_ARCH_VXWORKS, and QT_ARCH_WINDOWSCE with
their Q_OS_* equivalents.
Note that this commit also effectively disables the SPARC atomic
implementation. An inline implementation for SPARC needs to be added,
or we remove the current code and instead rely on the GCC intrinsic or
C++11 std::atomic support on SPARC.
Note also that this commit does not remove QT_ARCH from configure or
qconfig.h. This will continue to be set until all Qt 5 projects can be
moved away from using QT_ARCH.
Change-Id: I5de747cc4436d21941329974cff3016970f497b8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The helper process 'app' wasn't built in release configuration.
Also improved finding the helper executable to utilize
QFINDTESTDATA and print out a proper errors if it could not be
found or started.
Note that adding ".exe" to process name in Windows is unnecessary
as QProcess already does that for you, so removed the ifdeffing.
Task-number: QTBUG-24330
Change-Id: Ibe75e0ecd24181ab623d0a60f17ecaf92052b0dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This allows to drop or paste them into lineedits and text widgets
(including such widgets in non-Qt applications)
Implementation note: this is done on-demand rather than in setUrls
so that it's still possible to setText explicitely; the new code
is only a fallback for when no text/plain data is available.
Change-Id: Ie90c43a30bfa64a6047b627e7351d20bf5ec8e03
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The watchFileAndItsDirectory() test would fail due to atime updates for
the first watched file coming up to 2 seconds after the file was closed.
Observation shows that the atime has a 2 second resolution on Mac OS X
using HFS+, so add an appropriate delay to make sure that the atime
update from the kqueue based file system watcher can dispatch all
updates.
Task-number: QTBUG-22744
Change-Id: Ie79af20d6b4c154021307c8a8f6d336369720337
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
- Changed qcryptographichash to use TESTDATA and QFINDTESTDATA
Change-Id: Ic3a1bdccc9f81605c648dab2a642421d17f7fe80
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed json unittest to use TESTDATA and QFINDTESTDATA
Change-Id: Id29f8257565f409fa184ba465f25bc8454e2b7fb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Currently QMetaType API contains almost only static methods. This works
nice until someone needs more information or needs to do more operations
on a type. In this case every function call has to do type dispatch.
This API allows to avoid redundant type dispatching, by caching a
type information in a QMetaType instance. It gives significant
performance boost especially for custom types (up to 9x).
Change-Id: I223d066268402e072e41ca1d0a3e7bc160655d7f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
openStandardStreamsBufferedStreams would fail if standard streams were
redirected to a file (e.g. ./tst_qfile > testlog.txt).
openStandardStreamsFileDescriptors already has a workaround, so apply it
here too.
Change-Id: Iffe9d7864909e489e77c1114e80c4e3bc70a8722
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
We should not assume that the first type id is 0.
Change-Id: I17ba6ba57e97ebd495904bfd11235fe458f214e5
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
This autotest checks that meta-methods can be properly inspected
(signature, return type, parameter types, etc.).
Change-Id: I13dc75ec5123280e94ec738dade3f54e427fdbaa
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
- Run each test in a temporary directory, avoid writing test
files in source/build tree and prevents tests being influenced
by left-overs from previous runs and locks of the application
on the current directory.
- Modify test to be able to use absolute paths to the temporary
directory.
- Skip parts of test removeFileAndUnWatch if a race condition
occurs.
Task-number: QTBUG-24029
Change-Id: I215cc2e0fe6f92d2ffe597b01cdc9c9a39e3c5b4
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Do not mark with insignificant_test anymore.
Task-number: QTBUG-22747
Change-Id: I4ef6d5d7e1189b03fd1ab812a0839e3709686e1b
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
For template-based connect(), the meta-object is resolved at
compile-time (the virtual metaObject() function isn't called).
But we can make it work by copying the members of the dynamically
constructed meta-object to the statically defined one.
Change-Id: Ia4d3263a89008e36e187c584db6d25d9042f32b3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
moc supports it, so qmetaobjectbuilder should too.
Change-Id: I01475794e928b5a1b659f0dab044933948186971
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
'position' was being used to initialize 'n' before being fully
validated. To compensate for this, the code attempted to fix 'n' once
'position' was found to be invalid (negative). This would, however, also
attempt to "fix" a perfectly valid value of 'n'.
By fully validating 'position' beforehand we avoid this trap and can
safely use it to validate and reset 'n', as needed.
Arithmetic for boundary conditions of 'n' was rearranged to avoid
triggering integer overflow.
Removed explicit check for shared_null, as the same behaviour can be
supported without it.
Change-Id: Ie9bff7b8137a74f55c7dcfe629bd569045e28f3c
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Rename rows using naming convention used elsewhere in this test.
Change-Id: I8e669cedcc2058cf84cee976c8a0a478bc1cea0a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use the codec name instead of just numbering the rows. This eliminates
some duplicate row names. Two duplicate rows have also been removed --
for the WINSAMI2 row, the last value in the row is different, making one
copy do a subset of the testing done by the other, so the row that did
less testing was removed.
Change-Id: I859f681a627e8d3839ca8a4ba09d541bec43d9fb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This function returns true if the file path can be used directly with
native APIs, modulo encoding and path separator conversions. This is
important for applications that interface with other libraries or simply
need to use native APIs together with Qt.
Traditionally, this information was available in QAbstractFileEngine and
forced users to explicitly create an engine or use internal API such as
QFile::fileEngine to access the underlying engine and this piece of
information.
Given its usefulness, exposing the information in a more visible place
is more appropriate. This reduces the need for people to know or care
about implementation details, like file engines...
The existing isLocalFs test was updated and repurposed to use the new
API, instead of relying on file engines and internal implementation
details of QFileInfo.
Change-Id: I65f497bb25741f6f7ea4d2c3b3562c8c4aab8bea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Socket notifier behavior is very OS-dependent. QtNetwork uses non-
immediately (it will return -1 w/ errno=EINPROGRESS). We have to wait
with select(2) to indicate that the connection is ready, then call
connect(2) again. When this happens, we need another call to select(2)
to get notification on the listening socket so that we can call
accept(2) to complete the connection.
The mixingWithTimers() failure happens due to the test expecting a
single processEvents() call to be able to completely connect a TCP
socket. But as described above, this may not happen. The test should
QTRY_COMPARE() to give the test a chance to let all this happen.
The posixSockets() test can fail due to the same connect() behavior. The
test already has a comment about the write notifier behavior being very
OS dependent. This caused the first enterLoop() to return too early,
before the read notifier fired (which is what the test is checking for,
that the read notifier fired). Move creation of the write notifier to
where we expect it to fire, just before writing to the posix socket.
In the same test, the read notifier inside QTcpSocket may not fire after
the write notifier on the posix socket. Use the waitForReadyRead()
function to give the socket a chance to read the data written to the
posix socket.
Change-Id: I541e6ee9a39a92ce3acf6b9ffee51079febe43e4
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
This architecture is obsolete and discontinued.
Support for PA-RISC can be re-added if needed, but it would be preferred
to use the GCC intrinsic support from qatomic_gcc.h (on Linux/HPPA, for
example).
Change-Id: I952e521a2c8c68840df0d44843b5487d5c20b135
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I love how this magically makes SimpleVector move-aware :-)
Change-Id: I5cb75954d70cf256863c33e684ebc4551ac94f87
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
And fix documentation of toString() which said this was the method to
use for displaying to humans, while this has never been true.
Change-Id: Iff6df92e32b2517e1481d4992d80cae2d58da427
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Do that by keeping the QWeakPointer that track QObject independent of
the ones that track QSharedPointer.
QSharedPointer do not touch the sharedRefCount in QObjectPrivate anymore
When converting a QWeakPointer constructed from a QObject to a
QSharedPointer, it will display a warning saying one should not do that.
Task-number: QTBUG-22622
Change-Id: I3595e3e7401702410776c458687ab357ad9366ab
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add QEventLoop::ProcessEventsFlags test data for
tst_QEventDispatcher::sendPostedEvents() to test that posted events are
sent when waiting for events and when not waiting.
Change-Id: I99f9eb121d0b1ded725e19c5233922fc0a6b81e4
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Since some GUI event dispatchers are complete reimplementations and do
not build on the corelib ones, we want to run the same tests with the
other dispatcher.
Since this is a GUI test now, we need to make sure to drain system
events queued during application startup to make sure we can reliably
run the test functions.
Change-Id: I4905db70bc8f8584c4ef1f4d767824040281452c
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This will test the event dispatcher in corelib for proper timer and
posted event handling. The test makes sure all of the necessary virtual
functions are implemented and working as expected.
This test doesn't test socket notifiers or Win32 event notifiers, as
these are already covered in existing tests.
Change-Id: I5540ffc4e6d7f97bcd6c3725d7e74c0ab9c97015
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Put in qconfig.h whether qt is compiled with reduced relocations.
When using -Bsymbolic-functions (enabled by default on Qt)
but not -fPIE, the comparison of the function pointers fail
because the addresses are different in Qt, and in the executable.
Hence we now enable -fPIE by default on qmake, and force a compilation
error when it is not enabled and built with reduced relocations.
Done-with: Sune Vuorela <sune@vuorela.dk>
Change-Id: Ib3fdba06fab6e8a93b75b4c6cf16cc973ab335db
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Changed unload_after_implicit_load() to use full path
- Turned off app_bundle
Change-Id: Ibdf3ae0dc833d97eba64298715eb88c70408fff6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Only run invalidConstructs() tests if not cross compiled
Change-Id: If99fccdf9bca339507ca60c49aa89dc35c535d3d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Check the QT_OUTPUT_PATTERN environment variable in the default
message handler to customize the output of messages. Following
place holders are right now supported:
%{message}, %{type}, %{file}, %{line}, %{function}
The original cleanupFuncinfo was written by Thiago Macieira.
Change-Id: I6ad25baaa0e6a1c9f886105d2a93ef3310e512a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure <faure@kde.org>
- Marked four tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qfilesystemwatcher
- tst_qsettings
- tst_qlibrary
- tst_qsharedpointer
- Skipped one invalid case (tst_QCoreApplication::argc())
- Ifdeffed around vsprintf issue in MSVC (tst_QByteArray::qvsnprintf())
Task-number: QTBUG-24157
Task-number: QTBUG-24146
Task-number: QTBUG-24128
Change-Id: I4db957a65fbf0093f5ae3dc1a04d792492818104
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QVERIFY2 and gracefully fail with an error message, rather than
crashing, if getgrgid() fails.
Change-Id: I82a7290f83208486577988cc831d5d3cba20f98e
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The test was failing at:
QCOMPARE(property.userType(), qMetaTypeId<CustomType*>());
The CustomType* metatype was not registered before this part of the
test.
qMetaTypeId<T> will register the metatype for T before returning it if
it is not yet registered, while QMetaProperty::userType() returns 0 if
the metatype is not yet registered. However, the order of evaluation of
these two expressions in the above statement is technically undefined.
Apparently, gcc evaluates the arguments in order from right to left,
allowing the test to pass, while clang evaluates the arguments in order
from left to right, causing the test to fail.
Change-Id: I5059556e860cec29b57c31e4e26f46cf9e6055da
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
- testCustomRuntimeDirectory test skips if run as root
Change-Id: Idcc2a1db5d8a96b2ec0248b8b1c392fffc0b2e11
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Added checks to see if running as root and skip as needed
Change-Id: I4f94d5bfe511c6dfda315854b7cd1f64efe6e4f4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
When run as root was able to move file to /etc directory but was
expecting a failure.
Change-Id: Ic2ac5506253f2a3395ed56e88a856542bf82ad6d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
To hide the IsPointerToTypeDerivedFromQObject monstruosity :-)
Documentation for Q_DECLARE_METATYPE and qRegisterMetaType was updated
to mention requirements on registered types and how they can be
circumvented for pointer types with the new macro.
Change-Id: If83b037a8e2f28761eb903525e87008107298801
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It is possible to do this for example:
QVariant v = QVariant::fromValue<MyCustomQObject*>();
QObject *object = v.value<QObject*>();
This means that if a QVariant contains a pointer to a QObject
derived type, third parties can extract a QObject* and use its
properties without knowing the concrete type.
This is a source compatible change.
Change-Id: Iee9a9437e99cc2f40d1a4bfea47275482ef7161f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
QMetaObject::invokeMethod attempts to deference the extradata for
meta objects versions 6 and greater which is causing a crash in some
of the qtquick1 tests.
Change-Id: If5b2ca83b15de2cd558976c6b681dd5457c404d1
Reviewed-by: Chris Adams <christopher.adams@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Timers are not entirely precise; if we ask for a timeout of
10000 milliseconds, we might time out in 9999 instead.
Also, we know the expected elapsed time in each case, so do a fuzzy
comparison against that time.
Previously the test was verifying that the elapsed time was greater than
or equal to the timeout in the case where a timeout was expected, which
means the test would not detect bugs which incorrectly caused the
timeout to occur later than it should.
(cherry picked from qt4 commit 9a2573dc13b3e8df6cd15bef64370ea407480fc7)
Change-Id: I91d0c81f989ab43a3c48f6abbb4c5b28e2b35402
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The open test case tests opening a device path on windows.
As this requires privilege elevation, the test fails when running
nmake check from a console.
As the CI machines appear to run tests with admin privileges, first
check opening the device using the windows API. If that succeeds, then
opening using QFile should succeed. If that fails, the opening using
QFile should fail.
(Since Windows vista, members of the "administrators" group do not run
at elevated privilege all the time. The user needs to opt in via a
UAC prompt or "run as administrator". This is similar to using the
sudo command on unix)
Ran the test as administrator and normally. Now passes in both cases.
Change-Id: Ibd7682eceb61e35d4912fa0392df536f4331f6ed
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
QMetaType used to register a typeName and factory functions for
creation/destruction of objects. While it would be possible for a single
type name to be registered matching different actual types and memory
layouts, there was little that could be done about it.
Now that QMetaType is tracking type information with a direct impact on
data layout and ABI (size and type flags) it is important that we check
and detect binary incompatibilities as early as possible.
[Such incompatibilities could arise from type name re-use (technically,
ODR violations) or, more commonly, as version mismatch between different
shared libraries or plugins.]
Only type size and flags are checked as function pointers to inline and
template or otherwise non-exported functions could trivially differ
across translation units and shared libraries.
When registering typedef types, a check is made to ensure the same name
doesn't get registered as different types.
Change-Id: I8211c3de75d4854ce8fafdb620d3a931c206e0c3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
The function hasn't been working properly. It was not well tested, for
example it is undefined how QVariant should behave if it contains an
instance of an unregistered type.
Concept of unregistering types was inspired by plug-in system, but in
most supported platforms we do not unload plug-ins.
Idea of type unregistering may block optimizations in meta object
system, because it would be not possible to cache a type id.
QMetaType::type() could return different ids for the same name.
Currently QMetaType::unregisterType() is not used in Qt.
Change-Id: I878b6e8d91de99f9bcefeab73af2e2ba0bd0cba0
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
There is no point in keeping separate values which should mean the
same.
QVariant::UserType was used also to construct a valid, null QVariant,
containing an instance of unknown custom type. The concept was strange
and useless as there was no operation that could be done on such
QVariant. Therefore it was dropped.
Please note that the patch slightly changes behavior of different
functions accepting a type id as parameter. Before QVariant::UserType
was an invalid type from QMetaType perspective (id 127 was not assigned
to any built-in type), but QMetaType::User points to the first registered
custom type.
Change-Id: I5c7d541a9affdcdacf53a4eda2272bdafaa87b71
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
- Updated copyright year, per 1fdfc2abfe
- Updated contact information, 629d6eda5c
- Drop "All rights reserved", 5635823e17
(Empty line added to maintain license header line count)
Change-Id: Ie401e2b6e40a4b79f4191377dd50dc60be801e1f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As discussed on list and approved by Lars and Thiago.
Make QSystemLocale private to give us time and space to change it to a
better implementation.
Change-Id: Ifd806972f3996c43a876f544f78c6557ad71cd75
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Ensure consistent conversions by not using the system default locale.
Change-Id: I60db9fc4f465c0254f3213419e57d7879aaddd65
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QByteArray is declared as movable but it was not tested before.
Change-Id: I4fb636f8705c3fd792a768872206203ee5fd4ddb
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Convert QDate to only use Gregorian calendar and not Julian calendar
before 1582. In future the Julian can be used via proper calendar
classes.
Change-Id: I547a3550332057a0ab1be616706630b6afaceffc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Store the QDate Julian Day number as an qint64 instead of uint32 to
enable support for dates before 2 January 4713 BCE. This changes the
possible date range to be approx 2.5 Quadrillion BC to 2.5 Quadrillion
AD. A qint32 was not used as it only covers 5 million BCE to 5 million
CE which does include Geological or Astronomical time.
The effective supported date range is currently 4800 BCE to 1.4 million
CE due to restrictions in existing conversion formulas. The effective
range will be extended later with new formulas.
Change-Id: Ib4345369455b31d4edae8c933b7721e76414e914
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qmetaobjectbuilder should generate meta-objects of the same version
as moc; in the future, when the moc version is bumped, QMOB has to
be adapted at the same time.
QMOB was generating version 4 meta-objects. This patch makes it
generate version 6 (the current version). This also fixes a bug with
using qt_static_metacall with QMOB (setStaticMetacallFunction()); it
was already using the version 6 qt_static_metacall signature, which
isn't compatible with version 4.
Also add tests that ensure that the QMOB-generated meta-object works
with real objects; in particular we want to test the codepaths in Qt
that check for version >= 4.
Change-Id: I64a151ea5c947a6f8b7a00e85a39866446c735e9
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
- Use source file location as working directory for externaltests
Change-Id: Ic05259f48eece920b348ccbde9ba80c90dedfdd2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made QString::operator=(QLatin1String) work in that case.
Change-Id: Ie77eabd2f8f036531d67cd8051a7b6305b386ccf
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QTextStream and QDebug << operators work in that case.
Change-Id: I94d051ce2ebfb2d2a403b96d25e040c80a54bf7c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QString(QLatin1String) constructor work in that case.
Change-Id: I4f4f07a956144b7ea4aa9c58a61c755fb99ef1b3
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QLatin1String comparison operators work in that case.
Change-Id: I234ba851e67a6f5cfbb46fb6f0b22623ce40be28
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Changed to set working directory based on subprogram
stdinprocess's directory location.
- Changed QProcess execution of subprograms to use
relative paths.
Change-Id: Idbccca635f0f61adba9721bcceeceb0a8a961dcf
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
There isn't a good reason to impose the additional library call and
using the shared null here matches existing behavior in QByteArray,
QString and QVector.
Change-Id: Idd0bb9c7411db52630402534a11d87cbf2b1e7ba
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Record the file, line, and function where a qDebug, qWarning, qCritical
or qFatal call happens, and make this information available in a custom
message handler.
The patch uses the C preprocessor to replace qDebug, qWarning, ... with
a line that also records the current file, line, and function. Custom
message handlers can access this information via a new QMessageLogContext
argument.
Change-Id: I0a9b89c1d137e41775932d3b1a35da4ebf12d18d
Reviewed-by: David Faure <faure@kde.org>
A feature of a ref-counted quit (managed by a quit-lock class)
is added to both QEventLoop and QCoreApplication.
This allows, for example, an event loop to quit() when there is
no more work for it to do.
quitOnLastWindowClosed is implemented in terms of the refcount in
QCoreApplication so that jobs can be completed before the
application quits.
Change-Id: I14c8f4e7ee12bbf81a6e5849290d4c8ff37fa110
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Commit 4b8ceb41ae added the requirement
that pointed-to types need to be registered when registering pointer
types. Unfortunately, the implementation also affects function pointer
types.
This change whitelists 0, 1, 2 and 3 argument functions as not deriving
from QObject, forgoing the need to workaround details of the type
registration implementation when registering those function pointer
types.
Change-Id: I4d855e9d70a8179a6e31b84623ad5bf063e0d6d8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Remove methods that have been marked as deprecated
before Qt 4.6. Keep others, but inline them
where possible and mark them as QT_DEPRECATED_SINCE(5, 0).
Change-Id: If881821ae095f054b31cc13464f19e2007c20ed7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
- Changed unittest to use QCoreApplication::applicationDirPath()
instead of QDir::currentPath().
Change-Id: I398f7ea8b4426be85432d0eb3767ef6d59488d0a
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Added check to testLocateAll() to check count() before calling
first().
Change-Id: I04e93c1f913972b26c517f2bbd08760f9898cc7a
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Check the validity of date/time before attempting to perform maths.
Change-Id: Ia6a2caf07c6c36f7d7fac713a77bc4eb456c6ed6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A few methods in QString still assumed that QLatin1String
is always 0 terminated. Change this to rely on the size
provided by QLatin1String instead.
Change-Id: I9145a46e52ed8811f3b4e3d72d8a81a12588760a
Reviewed-by: Kevin Simons <kevin.simons@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the object is null, simply return an empty variant map.
Added another test case checking conversion from QJsonArray
to a QVariantList.
Change-Id: Ieccd163e76630f7db7f41255acd9d1baf66bb38d
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Kevin Simons <kevin.simons@nokia.com>
QVariant::UserType does not correspond to an actual type named
"UserType". This logic didn't make sense.
Change-Id: I369911e514f7902fc863cb05174011d6fc15c447
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Can be used by views to indicate whether a drop is allowed (eg
adequete permissions in a filesystem model).
Change-Id: Iefedb5399e44c8edc5f5df1403c8d5c0da618612
Reviewed-by: Peter Penz <peter.penz19@gmail.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
File system cached metadata can't be trusted when custom file engines
are in use, because the custom file engine may want to override the
metadata. (e.g. present an archive file as a directory)
Therefore, check if a file engine should be instantiated for each
result in QDirIterator. This is a fast check if no custom file engines
are registered.
When pushing a directory (using QDirIterator::SubDirectories) the
file engine needs to be instantiated also.
Task-number: QTBUG-23688
Task-number: ou1cimx1#965023
Change-Id: I0114c8df6258535553783a2486131c4194926649
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
(cherry picked from 3864ad09d578210b52e5f58fca2ee8a1144f5be2)
In QMetaType "void" is a regular type, lack of c++ sizeof operator
force us to write a template specialization for the type.
Change-Id: I9a56e135223b416b8031836d29ef33ef3fb750e4
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
These types don't exist anymore, so it's pointless to check for them.
Also remove the dead types from uic's type-to-header map.
Change-Id: I7f0af5c337859f3da1c103157a802bbe5372df9f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Some objects expect connectNotify to be called in order the signal to be
emitted.
Change-Id: Id0460d9c2aef8f9c3618a2b62b2119a790e06f30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
setEncodedUrl() isn't necessary anymore now that setUrl can handle
encoded (and partially encoded) urls.
url() is added for symmetry with setUrl().
Change-Id: I4e671482a5635a86797421ca50882db9cd60d852
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fixes round-trip bugs. People expect to be able to do
QUrl u(...); QString s = u.toString(); QUrl u2(s); and have u==u2.
This was not true for paths containing a '#', for instance, which would
be parsed back as a fragment. The solution is to make toString output
partially decoded data (more readable than toEncoded, but not decoded
to the point of changing the meaning, if parsing it back later as a
QUrl), and to make the QUrl constructor work with partially decoded data.
Change-Id: I013c01e8947d538435f3c20fc4ec57cd9ccbba6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLatin1String now has a constructor that takes explicit length, which makes it
possible to create QLatin1String that do not have null-termination character.
Fixed QString::operator> and < to be safe in that case.
In the same patch fixed qtjson which had operator< implemented in the same way.
QString::compare(QLatin1String) is still broken and will be fixed separately.
Change-Id: I48ec1183a6f44034129cc17312af854795085408
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The extra bool arguments weren't needed in the first place as they
specify the default, but were left behind when allocate parameters were
changed from bools to AllocationOptions.
Clang saves the day by pointing out the weird conversion going through
void ** (!?)
Change-Id: Ia0dafce06bf0ee62bd825a2db819c890343b6342
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
If T is defined as a metatype, then QList<T> is too automatically.
So for example, no need to use
Q_DECLARE_METATYPE(QList<int>)
anymore.
This is a source compatible change.
Change-Id: I2ee8a7b9e28fe6d4775f6a05cce39aca8563e0c5
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Fix a couple of cases where WildcardUnix was not matching when the
string was just [] or ended with a \.
The testWildcardEscaping() test has been extended to account for these
two cases too.
Integrate 7ce3726aea4be2dfdb57966a4482f66fec6f8f57 from 4.8
Task-number: QTBUG-20897
Change-Id: I7a07ac008473fa7a080db752e189f6404842603f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is no reason to keep two separated core types sets. It
couldn't be fixed before Qt5 because of binary compatibility promise.
This patch merges QMetaType core types with ext core types.
This "simple" operation consists of:
- QDataStream version was incremented, because type ids are
saved in QVariant's data stream.
- QMetaType LastExtCoreType and FirstExtCoreType were replaced by
LastCoreType, FirstCoreType and new QMetaType::HighestInternalId.
- New tests checking QVariant data stream for Qt4 and for Qt5 versions
were added.
Change-Id: I02dd74d29317365c297a789a4eb7c9c5edc3b231
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This provides the same functionality as the specialized QStringLiteral
and QByteArrayLiteral, but on top of QArrayData.
The macro has two variations, variadic and simple. The variadic version
depends on compiler support for (C99) variadic macros and enables
static initialization of arrays of any POD data. Use of this macro is
not recommended on code or applications that need to work in
configurations where variadic macros are not supported.
The simple version is more portable and is enough to support the use
cases of QStringLiteral and QByteArrayLiteral, also providing a fallback
that allocates and copies data when static initialization is not
available.
Change-Id: I7154a24dcae4bbbd7d5978653f620138467830c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These defines were there to aid in the commercial
licensing scheme we used long ago, and are no longer needed.
Keep a QT_MODULE(x) define so other modules continue compiling.
Change-Id: I8fd76cd5270df8f14aee746b6cf32ebf7c23fec7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QMetaType::QVariant has existed as a proper type for almost two
years, but the qvariant_nameToType function was written in 2006.
Using QMetaType::QVariant means QVariant can be treated just like
any other type. We can get rid of those hacky checks for LastType,
and the remaining checks become more readable.
The fact that QMetaProperty::{type,userType}() returned LastType
(0xffffffff) for QVariants was never documented (LastType itself is
internal). But there are other Qt modules that assume so. I'll fix
the ones I know about (qtdeclarative, qtscript, activeqt).
Change-Id: I799b9079bb8bbb1fe76c132525440b30415cbac5
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The existence of QAbstractItemModel virtual methods
moveRow, moveColumn, moveRows, and moveColumns
is implied by the existence of
beginMoveRows, endMoveRows, beginMoveColumns and endMoveColumns.
However, these were not actually provided by QAbstractItemModel.
With this change, subclasses can implement support for moving rows
and columns following the same pattern as for insert* and remove*.
Change-Id: Iad8b2223d4b9303abb6459c174a82ffed71a0fdf
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
If we request a substring starting at the very end of the string,
QString::mid should return an empty string, not a null string.
For instance, QString("abc").mid(3, 0) used to return a null
one, while this patch makes it return an empty one. The
same thing applies to QString::midRef() and QByteArray::mid().
Change-Id: Ie9efd7a0622d429efd0fb682c19856c19e9469af
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This imports the JSON support for Qt 5 from
playground/qtbinaryjson.
It adds a fast, fully compliant json parser, a
convenient C++ API, conversion to and from
QVariants and a binary format for JSON that is
extremely fast to use together with the C++ API.
Change-Id: If9e3a21a4241d388d0abaa446b6824f9cc6edb1c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a source incompatible change for Q_DECLARE_METATYPE(T*),
which now requires T to be fully defined.
The consequences of this are:
* Forward declared types can no longer be declared as a metatype.
(though this is a very uncommon thing to do).
There is a trivial workaround where necessary.
Change-Id: Id74c40088b8c0b466fcd7c55abd616f69acc82c8
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
URL schemes can only contain alphanumeric characters and all
protocols specify that they are case-insensitive. So instead
of doing case-insensitive comparison everywhere and then get
it wrong sometimes, better to lower-case it here.
Change-Id: I61f51a3f4c85b90af1586ebcf69608987fbe2ec3
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For asynchronous (overlapped) I/O notification on Windows one
can now use the convenience class QWinOverlappedIoNotifier.
It's using one global I/O completion port and a watching thread to
get notified when a read or write operation completes.
Change-Id: If6f904b364be0405580c7e50355529ab136ae3cb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The previous patch missed this, which was hidden inside #ifdefs.
Change-Id: Iba1417d4191b6931afb549022768f3e3a2cf727d
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Removes test.xml after test completed.
Change-Id: I548e2d644cca8ae0d30c3002df45cf57433170af
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The C++ standard says that the comparison between pointer to virtual
function is unspecified (C++11 $5.10.2)
But we still may rely on it for the Qt::UniqueConnection and the
disconnection
So test if it works while using the same function.
Using function from different classes works for me, but we should
probably not assume it works. I left it commented in the test for
reference.
Change-Id: I1d9b91d4cc1a424d4f43ef2ee4981b8573f1e86f
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
, as those are going away.
The comment in QString/QByteArray::squeeze about shared_null was updated as it
also affects other static data, such as that generated by QStringLiteral and
QByteArrayLiteral.
Change-Id: I26a757d29db62b1e3566a1f7c8d4030918ed8a89
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add spaces where necessary, and pull braces back to the same line.
Change-Id: If543686c9727a110f8a91f1a88e08d5d2ac12284
Reviewed-by: Richard J. Moore <rich@kde.org>
NTFS file access times are disabled by default since windows 6 for
performance reasons. The test now checks the registry setting and
reports XFAIL if access times are disabled.
Change-Id: Ia84ed0c8736e6c7d5817425006f6115d9f3e70a4
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Due to unconditional waits this test always needed 120 seconds to pass.
Now we're using QTRY_VERIFY and make sure that we write the data before
the process got killed even in the cases 3 and 4.
On my machine this test now takes 8 seconds.
Change-Id: I606a8b43ba4c97704be5202a6c5d8d1c75337f9c
Reviewed-by: Bill King <bill.king@nokia.com>
QBool was introduced with Qt-4.0, to detect Qt3-like code like
if (c.contains(d) == 2) and break compilation on such constructs.
This isn't necessary anymore, given that such code couldn't possibly
compile in Qt4 times.
And QBool was confusing developers, and creating compile errors (e.g.
QVariant doesn't have support for it), so better remove it for Qt 5.
Change-Id: I6642f43f5e12b872f98abb56600186179f072b09
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Qt now treats neither NTFS junctions nor mount points as symlinks.
Task-number: QTBUG-20431
Change-Id: I93f67d7438d441ceb53308d4a1f29335beedd547
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
We agreed on treating neither junctions nor mount points as symlinks.
This will be handled in another commit.
This reverts commit 1656c4780c.
Change-Id: I41a87b6df9f7fba333df4c967ee9f0c1f3940952
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
NTFS mount points are not treated as symlinks, because they might
not have a link target.
This is the case when a volume is mounted as a single mount point
without a drive letter.
This patch fixes building Qt in an NTFS mount point.
Task-number: QTBUG-20431
Change-Id: Ie2e15212e1a7ca7fa0067b7ca8857e243e42c21a
Reviewed-by: Thomas Hartmann <Thomas.Hartmann@nokia.com>
, as those are going away.
This cleans use of those operations in the QArrayData stack.
Change-Id: I67705fe0a2f8d99ea13739b675021356a5736f83
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: hjk <qthjk@ovi.com>
- nonWritableCurrentDir() function not valid test if run as root
so added skip.
Change-Id: I772e8356e6f798f5acdf7688c55f3241ad012a43
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- nonWritableCurrentDir() function not valid test when run as root
on unix platform so add skip.
Change-Id: I0c5ee685d3bdeaf3d5d2e0bb93ba7d7796fd1028
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- If we can find the qmake belonging to the build, use that instead
of qmake from the PATH for compiling subtests.
Change-Id: I9445754bb02dab11c3e1bbe9dc459ecc682689a4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
